Used ALPINE HS 90-30 D of 2005 for sale

Thickness 9-100 my Rotating die head Die diameter: 150 mm Movacolor dosing unit (one component) Fixed haul off Gusseting unit Rewinder: max. diam 1000 mm

The line did not process pure HDPE in 5 layers; 1 to 2 layers are possible with LDPE. For the rest of the materials: LDPE, LLDPE, MLLDPE, regenerated. Capacity: 400 to 450 kgs of maximum output depending on the width and thickness. The machine can make shrink film. The height of the haul off is 16 -17 meters 5 extruders 4 x HXS 50-30D Screw diameter : 50mm Screw length: 30 L/D Heating zones: 5 1 x HXS 75-30D Screw diameter: 75mm Screw length: 30 L/D Heating zones: 5 Magnetic separator CONTROL OF THE INSTALLATION : Process control ExVis 4.0 One Touch Manually operated screen changer, batch operation BLOWER HEAD: FBF 16-40X, Coex 5 layers, Helical blowing head for 5-layer films, with ABCDE layer composition Die diameter: 200mm Die diameter range: 160-400mm Outside diameter: 660mm Temperature setting range: 5 EXTERNAL COOLING with height adjustment for cooling the bubble on the outside : Cooling ring type CR Fan designed as a radial fan Frequency converter for speed control Electrical height adjustment Die diameter range: up to 400mm Fan power: 18.5 Kw INTERNAL COOLING : AIC VX with BDC bubble adjustment BDC bubble adjustment unit with : 3 ultrasonic sensors to capture the diameter of the duct BDC software Parameter input and monitoring via touch screen of the ExVis process visualization system Cooling tower type IBC-VX Incoming air fan with noise damper Exhaust air fan Frequency inverter for each fan for speed control Power of the incoming/outgoing air fan: 11 Kw CALIBRATION BASKET : 8 arms with rollers on ball bearings 5 levels of rollers Electrical adjustment of diameter and height Supporting elements for fixing the ultrasonic sensors of the bubble adjustment Flat width min-max: 530mm-2360mm Height adjustment range up to 1500mm Additional basket 8 arms with rollers on ball bearings 2 roller levels Electric diameter adjustment Flat width min-max : 520mm-2385mm PROFILE MEASUREMENT PROFILE OPTIMIZATION : Number of adjustment zones: 60 HAUL OFF Reversible pulling system, rotating frame. Maximum flat width: 1600mm Max. pulling speed : 150 m/min Lateral folding unit, possible gusset 450mm Wooden rods in the flattening unit S-Wrap-1, second cylinder with S-wrap Temperature control unit 2 web guide BST Pretreatment Corona AFS REWINDER Film winder with two winding and pre-stretching stations, equipped with an electric motor driven roll pressing device. Contact, contact/central and air gap winding. Maximum speed: 150m/min Winding shaft diameter: 3" or 6". Max reel diameter: 1000mm Lateral cutting unit in the pre-drawing Longitudinal cutting unit in the pre-drawing unit 2 Longitudinal cutting units in the winder 3 additional rip knives 2 winding directions right and left 2 Soft-Nip rollers 2 winding shaft handling systems 2 laser positioning of the mandrels 4 steel 3" winding shafts 4 x 6" steel winding shafts REEL HANDLING There are arms that tilt to place the reel on the pallet. There is also an x-arm to position the bar that is waiting on the next reel. MATERIAL FEEDING (NOT INCLUDED) : The material feeding is done by robots tshritters, it is not part of the line, it is not for sale. The line can be fed by rods, tshritters or other robots. PLASTCONTROL DOSING UNIT Controlled by screw: A : 7 dosing units B : 5 dosing units C : 7 dosing units D : 5 dosing units E : 7 dosing units PROCESS AIR/WATER COOLING UNIT 1 heat exchanger 55 1 heat exchanger 75 ACCESSORIES : 14 deflection cylinders, flat width: 1600mm 1 edge suction at the pre-drawing Tower not included

Thicknesses 8- 120 my Production 11 my, 1500 mm, 220 kg/h Fixed head with 225 mm die Dosing unit Doteco Grado 5 components+ master year 2021 Kundig thickness control Rotating haul-off with gussets 30+30 mm Ferrarini & Benelli corona treatment Maximum film width without gusseting device 1650 mm, with gusseting device 1550 mm Maximum line speed 150 mt/min Centring device Tower not included Available December 2024

Alpine Coextruder HS 50/50/50 S Screw diameter : 50/50/50 mm Screw length : 25/25/25 L/D Motor rating : 44/44/44 kW Heating capacity : 9.8/9.8/9.8 kW Die diameter : 180 mm / Die Gap 2.5 mm Lay Flat width : 520-1000 mm IBC Calibrating basket: lay flat width : 380-1160mm Plast Control Gravimetric Dosing units : 2/3/3 Web guide system type EL Measuring device : Plast Control Corona Treatment : AFS 4000 W Oscillating take off unit : working width 1000mm ; take of speed 12-120m/min Winding diameter : 1000 - 1500mm Tower included

3 Extruders Diameter 50/75/50 L/D 30/30/30 Coextrusion head Type TBF 16 - 32 K with IBC Die plate 250 mm Cooling ring HK 500  3 ultrasonic sensors for bubble diameter control 3 Gravimetric dosing units CONTREX Corona treatment CASON Rotating haul off GHIOLDI TR useful width 2200mm Automatic double windert GHIOLDI model BGH2 MIX, useful width 2200mm, year 2004 Chiller EUROCHILLER ABF 30