Complete line for production of cups / vending cups consists of:
4 layers sheet extrusion line Battenfeld-Cincinnati BEX 1-75-40 V, Thermoforming machine WM FT 700, Packing machine Imanpack
Material to process PS / PP.
The same die head for multilayer PS and mono PP sheets
Sheet extrusion line for the production of PS multi-layer sheets and mono PP sheets:
1. Main extruder BEX 1-75-40 V for PP/PS (Year: 2012)
Screw diameter 75 mm
Static mixer, Manual screen changer, Melt pump
Production capacity (PS)- 600 kg/h
2. Co-extruder BEX 1-35-30 B (Year: 2012)
Screw diameter -35 mm,
Production capacity - 40 kg/h
3. Co-extruder BEX 1-45-32 V (Year: 2012)
Screw diameter - 45 mm,
Production capacity - 200 kg/h
4. Co-extruder BEX 1-45-32 V (Year: 2012)
Screw diameter - 45 mm,
Production capacity - 200 kg/h
5. Mixture block: 4 connections; mixture of A-B-C-D
6. Flat die: width 1000 mm
Sheet width min. – max.: 730 mm – 1000mm
Sheet thickness: 200-2000 µm
7. Calander ILV 400-T2; width 1050 mm, 3 rollers of 400 mm each, individual drive of each roller, individual built-in water cooling of each roller, 2 draw rolls 250 mm each
8. Thermoforming Machine:
WRAPPING MACHINERY FT 700 (Year: 2010)
Maximum outside mold dimensions: 705 - 400 mm
Maximum trim area dimensions: 685 - 340 mm
Sheet width 400-750 mm
Sheets pre-heating: two sheet edge heaters before entering in the termoforming machine
9. Rim Roller
10. Conveyor belt
11. Packing machine Imanpack (Year: 2013)
40 packs/min PE film with counter device
12. 1 electric extruders control cabinet
13. 2 electrical calender control cabinets
14. 1 electric thermoformer control cabinet
15. Mezzanine for main extruder dosing and feeding system
16. One mold for PS cups (32 cavities) with two inserts 180, 155 ml
17. One mold for PP cups (32 cavities) 200, 220 ml.
18. Grinder OFFICINE MECCANICHE VERONESI (Year: 1989) with tubes for grinded material move back to the process + accumulation hopper
Dosing equipment:
1. For the main extruder BEX 1-75-40 V for PP/PS (Year: 2012):
Manufacturer: EnginPlast
For 4 components, consists of:
1) Volumetric dosing unit DPM 35/100
2) Volumetric dosing unit DPM15/30
3) Volumetric dosing unit DPM15/50
4) Volumetric dosing unit DPM15/50
5) Pressurised loading system DMIX AF 120
2. For the co-extruder BEX 1-35-30 B (Year: 2012)
Manufacturer: EnginPlast
For 1 component, consists of:
1) Material hopper volume: 35 litres
2) Volumetric dosing unit DPM15/30
3. For the co-extruder BEX 1-45-32 V (Year: 2012)
Manufacturer: EnginPlast
For 2 components, consists of:
1) Material hopper volume: 50 litres
2) Volumetric dosing unit DPM15/30
3) Volumetric dosing unit DPM15/30
4. For the co-extruder BEX 1-45-32 V (Year: 2012)
Manufacturer: EnginPlast
For 1 component, consists of:
1) Material hopper volume: 50 litres
2) Volumetric dosing unit DPM15/30.
More information
