Used Molds

8 Moulds : Suitable only for KMD 78 and relevent model (Turkey's, ILLIG - Some models) Manufacturer : Formital, Netherlands a. Packing box Container : 8 Cavity : 190 x 140 ( Heights 30/40/50/60/70 mm) b. Cup 125 : 12 Cavities ( 300/500/750/1000 ml) c. Cup 150 : 12 Cavities (600/750/1000/1200/1500 ml) d. Lid Cup Ø125mm (15 cavities in a single shot) e. Lid Cup Ø150mm (15 cavities in a single shot) f. 9 cav PP Lid 198 x 146mm Container cover g. Tray 165 x 114 x 34mm : 16 Cavity h. Tray 258 x 137 x 33mm : 06 Cavity (500/600)

5 Molds made up of upper punch and the mold itself (including adaptor plate for the upper punching mold) These molds have been used to produce PP-flower pots for the following dimensions 9 cm 5º, 9 cm 8º, 10 cm low, 10 cm high and square heads 9 x 9 x 9.5 cm. Punching press (Kiefel)for these molds included, which is necessary for production of flowerpots 1 Cutting unit for both products pot 9 cm 5° und 9 cm 8° 1 Cutting unit for both products pot 10 cm (thickness) and 10 cm (low) 1 cutting unit for the square pot The pots 9 cm 5° and 9 cm 8° have 24 cavities in the mold. Frames and upper punch are also included. The pots 10 cm (thickness) and 10 cm (in low) have 20 cavities in the mold. Frames are also included. The square pots have 24 cavities. All molds are in good condition and are manufactured in aluminium. The round tops, 9 cm 5° and 8° have been manufactured in PP film 690 x 0,75 mm The square tops 9 cm have been manufactured in PP film 690 x 0,85 mm The round top, 10,5 cm in low have been manufactured in PP film 660 x 0,8 mm The round top, 10,5 cm in thickness have been manufactured in PP film 690 x 0,85 mm The molds have been working in a Kiefel KL2SH 76

Moldes para termoformadora GN 1914 DM 1. Envase para torta 15 personas Materials: Cúpula: OPS cristal 600 micrones - Base: PET negro 425 micrones Dimensiones: Diámetro 235 mm Altura 110 mm Peso unidad 65 g. 2: Bandeja de PP Negro para alimentos fríos y calientes con tapa domo PET Materiales: Bandeja: Polipropileno Negro Reciclable* ; uso hasta 75°C. Tapa: PET Reciclable* ; uso hasta 65°C. DIMENSIONES INTERIORES: las medidas a enunciar se refieren a dimensiones útiles Bandeja: L x A Bandeja: 23,5 X 18 cm L x A Bandeja: 22 X 16,3 cm Alto: 2,8 cm Capacidad: 900 cc Peso: 24,4 gr Tapa: L x A Tapa: 19 X 12 cm L x A Tapa: 23,3 X 17,7 cm Alto: 2,2 cm Capacidad: 575 cc Peso: Peso: 21,6 gr 3. Envase para alimentos apto para calentar horno de microondas Material: Bese: PP negro Cúpula: PET 100% reciclable con tratamiento anti-empañado (Anti-fog) Dimensiones: Cavidad 1 Cavidad 2 Largo 117 mm 145 mm Ancho centro 100 mm 85 mm Altura 50 mm 50 mm Capacidad: 1.100 cc 550 cc Peso unidad: 50 g 4.- Envase para platos preparados fríos y ensaladas Material: PET 70% reciclado / 30% virgen (Material 100% reciclable) Dimensiones: Largo 225 mm- Ancho centro 175 mm - Ancho costados 100 mm - Altura 55 mm Capacidad: 2.500 cc Peso: 53 gr 5.- Pote para repostería de 6 onzas con tapa Material: Poliestireno cristal biorientado (BOPS) Diimensiones: Diámetro: Exterior con tapa 9,4 cm Borde interior 7,8 cm Base 4,8 cm Altura 6,6 cm Capacidad: Con tapa: 200 cc (7 oz) / Sin tapa: 170 cc (6 oz) Peso Unidad: 7 gr 6. - Pote / tapa con bisagra Material: Polipropileno traslúcido de 500 micrones Dimensiones : Largo 11,4 cm (Interiores). Ancho 7,2 cm - Altura 7 cm Capacidad: 650 cc Peso: 13,2 gr Dimensiones: Largo 11,4 cm (Interiores) Ancho 7,2 cm Altura 3 cm Capacidad: 280 cc Peso: 13, 2 gr 7. Bandeja para Alimentos de 2 cavidades termosellable, apta para uso en horno de microondas Material: Polipropileno termosellable (PP/PE) Dimensiones: Cavidad 1 Cavidad 2 Largo 145 mm 145 mm Ancho 110 mm 80 mm Altura 35 mm 35 mm Capacidad: 420 cc 280 cc Peso unidad: 26 gr 8. Bandeja para alimentos- Termosellable, con barrera para gases, apta para uso en hornos de microondas Material : Polipropileno termosellable barrera (PP/PE, 760/40 mic) (Material aprobado para contacto con alimentos en conformidad con las normas EU 10/2011 y CFR 21 USA-FDA) Dimensiones. Largo 19,8 cm.- Ancho 14,7 cm - Altura 3,5 cm. Capacidad: 1.000 cc Peso unidad: 26 gr 9. Envase con Tapa para Alimentos Material: Envase: Poliestireno cristal 650 micrones Tapa: Poliestireno cristal 300 micrones con antiniebla Dimensiones: Largo 19 cm. - Ancho 14 cm- Altura 8 cm. Capacidad: 2000 cc peso unidad: 41 gr

Molds are used in Illig RDM 70K machine from 1990 Price is for each mold 1x 95mm pp mold includes in price one of these 3 inserts, to be choosen among them: with inserts for 200ml, 350 und 500ml. 14 cavities 1x 75mm ps mold mit 4 times inserts (includes in price one of these) 18 cavities pick up in September

Tooling for 77 holes tray · Form segment incl. plugs · Combi-tool for bottompunch and contour cutting · Mounting plates for both 77 nd 150 holes tray · Up stacker plug for both 77 and 150 holes tray Tooling for 150 holes tray · Form segment incl. plugs · Combi-tool for bottompunch and contour cutting to · Up stacker plug for both 77 and 150 holes tray