Please accept marketing-cookies to watch this video.

Použitý Stroj HUDSON-SHARP SUP 750 2003 na prodej

Pouch dělat stroj HUDSON-SHARP


Záznamový List Použitý Stroj HUDSON-SHARP SUP 750

Ref. : 300043957

Rok: 2003

Značka: HUDSON-SHARP

postavení: Na prodej

Dodací lhůta: Bezprostřední



Technické Specifikace :

svařovací Šířka: 760 mm

Taška Délka (max): 500 mm

Taška Délka (Min): 100 mm

Ostatní Specifikace:

SERVO DRAW STAND-UP POUCH MACHINE

UNWIND SECTION:
Max. load capacity 500 kg
Useful reel width 1500 mm
Max. reel diameter 800 mm
Single axis (one reel position)
One expandable air shaft 76 mm core diameter
Shaft driven VFAC drive package with pneumatic loader dancer trim
Optical Edge Guide with Digital Control Processor and Electromechanical Actuator
End of reel detection
Film brake sensor
Stand alone V-board folding section with manual sidelay position

BASIC MACHINE AND INFEED SECTION:
Modular frame concept
Metric design
AC Servo Motor to drive the Main Draw Rolls
Multilingual Operations menus
Infeed capstan with VFAC drive
Air loaded dancer with fluted rollers to convert film motion from continuous to intermittent
One Photocell Eye for print registration
Two-way print registration with auto nominal system
Eye-to-Mark function to search Mark on printed film
Electric Control cabinets
Three static eliminators
Bag stack and Totalizing counters

POUCH SHAPE AND ZIPPER SEALING SECTION
One longitudinal Intermittent Sealer - Operator Side - can run as 3 side seal and Zipper sealer with appropriate die
One Longitudinal Intermittent Cooler - Operator Side - can run as 3 side seal and Zipper cooler with appropriate die
One Longitudinal Intermittent Shape Sealer - Non Operator Side - can run as Parabolic, Chevron, 3 side seal Sealer
One Longitudinal Intermittent Shape cooler sealer - Non operator side - can run as Parabolic, Chevron, 3 side seal sealer
Fours solid state digital temperature controllers for the heating cartridge elements

CROSS SEALING SECTION
Two hot cross sealers
One cross cooler
Temperature controllers for the heating cartridge elements

WEB TRACKING, CUT-OFF AND STACKING SECTION
Anti-jamming feature on knife draw rolls section
Two tracking guides pneumatically controlled
Pneumatic driven guillotine knife

CAPABILITIES OF BASIC MACHINE (TO RUN 3 SIDE SEAL, STAND-UP W/ ZIPPER)
Max. sealing width: 760 mm
Max. web didth prior to fold: 1500 mm
Min. draw lenght: 100 mm
Max. draw lenght (referred to longitudinal sealer - 2 hits): 500 mm
Max. draw lenght (referred to longitudinal sealer - 1 hit): 1000 mm
Min. bag size for 3 side seal without zipper: 100 mm x 150 mm
Max. bag size for 3 side seal, Double Hit without zipper: 500 mm x 730 mm
Material Gauges: 125 my max. per layer ( 4 layers max.)
Zipper center line up to 100 mm from open end
Zipper type: flanged
Max. speed up to 100 c/min for stand up pouches with zipper
Max. speed up to 150 c/min for three side seal without zipper

SPECIAL CUSTOMER´S CONFIGURATIONS.

STAND UP POUCHES - SINGLE LANE- STARTING FROM ONE WEB
One Gusset forming system int he Intermittent area
One set of longitudinal sealing and cooling dies

ZIPPER INSERTION - SINGLE LANE
One stand alone VFAC driven zipper unwind stand
One set of zipper guides
one set of zipper sealer dies
one set of longitudinal zipper cooler dies
One zipper profile crusher
One zipper spot cooler

CENTER BACK SEALER UNIT - STARTING FROM ONE WEB
Film is formed into a tube prior to entering the pouch machine dancer section
The tube can be formed with or without gussets
The tube can be sealed in an overlap of fin seal method
Specifications approx:
- Wide max. starting web width: 1500 mm
- Min. draw size: 100 mm
Max. draw size: 1000 mm
Max. gusset depth: 150 mm
Wide finished face width: 500 mm

SIDE GUSSETED BOTTOM SEALWITH DUAL INSERTED SIDE GUSSET - STARTING FROM THREE WEBS (MAIN FILM AND 2 INSERTED GUSSET FILMS)
Main film is folded in the V-Board of driven unwind and goes to the infeed and dancer section of the machine and is side open with a slitting device
Inserted gussets start from flat film, 2 webs, coming from 2 driven unwinds and V-Board folder sections placed at Operator and non operator side after main film side open slitting device
Gusset materials must be unprinted as there is no method of registering the print to the main web.
One side slitting unit to open folded main web
Two VFAC driven gusset film unwind
Two vertical V-Board adjustable across film feed direction to fold gusset films
Gusset insertion system
Two 15 mm Diameter gusset tack punches
One set of insert die for longitudinal intermittent edge sealer ( normally used as Longitudinal sealer)
One ser of insert dies for longitudinal intermittent edge sealer ( normally used as zipper sealer)
One gusset spot cooler unit with 2 cooling heads
Specifications (approx):
- Min. gusset size: 25 mm
- Max. gusset size: 150 mm
- Max. gusset reel diameter: 600 mm
- Inserted gusset material to be unprinted

One auto correction system on tack hole punch carriage that allows higher precision on punch repeats at gusset area even at high speeds, with scan photocell and step motor actuator
One auto correction system on longitudinal seal carriage for higher precision on punch repeats at gusset area even at high speeds, with scan photocell and step motor actuator
B&R Controller upgrade

GENERAL OPTIONS:

Tear Notch Punch
Hang Hole
Automatic Indexing Stacking Table
Dual Edge Trimmer and center slitter with scrap removal
Additional safety protection system

Ostatní Detaily:

Zaručit:

Provozuschopnosti:

Dostupnost: Bezprostřední

Voltage: 380 V Triphase
Frequency: 380 V Triphase

Podobné stroje:

*Name:
*Telephone:
*Název společnosti:
*Email Adress:
*Města:
*Země:
*Comments:

Kontaktujte Nás

Head Office - Europe
Parque Tecnológico de Boecillo
Calle Andrés Laguna 9-11
E - 47151 Valladolid
Spain
+34 983 549 900
info@machinepoint.com
Podívejte se na naše další Kanceláře »

Kontaktujte Nás