Please accept marketing-cookies to watch this video.

ELBA SA M 09 2018 技术参数

袋式制袋机 ELBA


二手 ELBA SA M 09 技术参数

联系我们 : 300044167

生产年份: 2018

品牌: ELBA

状态: 待售

交货时间: 现货



技术规格:

焊接宽度: 950 mm

袋长(最大值): 960 mm

袋长(最小): 300 mm

生产周期: 250 U/min

成膜速度: 100 m/min

其它规格:

Automatic medical machine type SA-M-09
Useful sealing width : 950mm
Material : LDPE - HDPE - PP
Max mechanical speed : 250 cycles/min
Max working speed : 200 cycles/min (subjected to thickness and type of material, pouch dimensions, film quality and stacking type)
Max film speed : 100m/min
Air consumption min 6 bars : 900 Nl/min
Absorbed power : 20 kW
400V - 50-60 Hz

Production range :
Bags with 1 o 2 patches in 1 lane :
Width min-max : 200-650mm
Length min-max : 300-960mm

Material C-fold PE75 to 125 microns, Tyvek 2FS Type or similar
Patch size from 60mm to 152.6mm diameter
Patch sealing from 54mm to 146mm diameter
Patch hole from 40 to 140mm diameter
With these dimensions, it's possible to use the same structure and change only the cutting/sealing units
Tyvek stripe shall be always 20mm wider than the sealed patch.

*Automatic unwinder :
1 roll reception and unwind
Max roll width : 1000mm
Max roll diameter : 1000mm
Max roll weight : 800 kg
Manual film centring controller by means of wheel
Clockwise and counter clockwise unwinding with manual setting
Dancer group to control the unwind speed
Sensor for the automatic stop at the end roll
AC gear motor for the film axial unwinding (an iron core with dedicated shaped edge is required)
Winder supports with hydraulic lifting device "shaft-less" max 1800kg
Film centring unit

*Multifunction bridge support
*1800mm frame length
*Side opening system (System to open the C fold material)
*Draw roller
*Film tension device
*Draw roller
*Film opening device
*Accessories bridge support
*Punching unit ready for Tear Notch, Euro Hole, Round Corner and Round Hole (toothed punching die 78mm diameter)
*Bridge support and Photocell
*Sealer holding group
*Double sealing unit
*"Patch" cut and sealing (Vent cutting end sealing group)
Max useful roll width 180mm
Max roll diameter : 600mm
Max roll weight : 15kg
Sealing/cutting size ready for 152mm diameter patch
*Bridge support and detection system
*Accessories bridge support
*Punching unit ready for Tear Notch, Euro Hole, Round Corner and Round Hole (toothed punching die 78mm & 52mm diameter)
*"Patch" cut and sealing (Vent cutting end sealing group)
Max useful roll width 120mm
Max roll diameter : 600mm
Max roll weight : 15kg
*Conveyor belt for bags exit
*Automatic collecting table
*Machine interface (Multi languages interactive 15" touch screen panel)
*Air fan

The machine has approx. 600hours of operational time. It was purchased to service a new Customer opportunity which did not make it to fully commercialised stage.

其它细节:

保修: 无保修

运作情况: 不能运转。带产品状态可见

可供状态: 现货

Voltage: 400 V Triphase
Frequency: 50 Hz
Voltage: 20 Kw

类似机器:

*名:
*座机:
*公司全称:
*电子邮箱:
*城市:
*国家:
*备注:

联系我们

Head Office - Europe
Parque Tecnológico de Boecillo
Calle Andrés Laguna 9-11
E - 47151 Valladolid
Spain
+34 983 549 900
info@machinepoint.com
查看我们其他的办公室 »

MachinePoint全球网点