Used Extrusion Blow Moulding machines up to 10L

Looking for a used Extrusion Blow Moulding machines up to 10L? Visit us to see our selection for sale!. Extrusion Blow Moulding machines up to 10L Tongda, Automa, Uniloy, Kautex, Plastiblow, Hesta, Magic, Jomar, Techne, Eisa, Luxber, Jwell, Rocheleau, Blowmolding
  • Used Beverage Machines
  • Used Blow Molding Machine
  • Used Compounding Machines
  • Used Dairy Machine
  • Used Film Converting Machines
  • Used Film Printing Machine
  • Used Film Extrusion Machines
  • Used Injection Moulding Machine
  • Used Pipe Extrusion Machine
  • Used Profile Extrusion Machine
  • Used Recycling Machine
  • Used Thermoforming & Sheet Machinery
  • Used Fruits and Vegetables Machines
  • Other Used Machines

    • Machines sold in the past:

    Leak tester
    PLC Gefran
    Extrusion blow moulding machine UNILOY BWF 16 E - 2004: 1 Station for (current) 10L jerrycan EXTRUDER: screw diameter: 90mm L/D: 24 Speed: 76 rpm Brushless drivers: AC with inverter or DC Screw rating: 70 kW Output capacity: 220 kg/h (PE) Cushioned dry cycle: 2,4 sec. Max. Working cycles/hr per side: 600 Performance rating, oil pump motor: 22 kW Hydr. Operating pressure: 120bar Max. Hydr. High pressure 170-210 bar Operating pressure pneumatic: 8-10bar Pressure air requirement approx.: 2.500 Nl/min Hydraulic tank cooling: 55.670 kJ/h Blow mould: BW F16E: Max. mould length with adapter plates E: 520mm Max. mould length without adapter plates E: 435mm Max. mould width: 500/520 mm Min daylight between closed platens: 310mm Max. mold daylight (opening stroke): 320mm Max. daylight between opened platens: 640mm Clamping forces: 160/200* kN Horizontal shuttle stroke: 520/540*mm In 2019 the system was completely overhauled, new Beckhoff control system etc. pp. Only 5500 h run since then. Included is a quality centre for weight, tightness and neck as well as a packing table for up to 60 canisters.
    Reciprocating screw blow molding machine 900g maximum shot size 50 tons clamp force Rotary toggle clamp actuator Trimming unit Resin vacuum unit (Conair Dustbeat) Bottle take out device included Power Unit 75 HP electric motor, 230/460 volt, 3-phase, 60 Hz., 60 GPM hydraulic pump, 150 gallon reservoir 15-20 tons chiller water required, molds and machine 40 CFM @ 100 PSI compressed air required
    Extrusion Blow Molding machine Plastiblow PB10-D XXL - Hybrid machine Year 2007 Extruder 100/25: Screw diameter: 100 mm L / D: 25 Motor power: 72 kW Heating power: 20.4 kW Heating zones: 5 Cooling Fans: 5 Screw plasticizing capacity with PE: 220 kg / h Blowing unit: Maximum volume hollow body: 10,000 cc Maximum blow pin pressure: 18 kN Maximum mold clamping force: 220 kN Station stroke: 800 mm Dry cycle time: 2.8 s Maximum dimensions of the mold: Height: 470 mm Depth: 790 mm Width: 2 x 135 mm Opening stroke: 270 mm Weight: 250 kg Compressed air: Average consumption: 4500 Nl / min Pressure: 6-7 bar Power Consumption: Total installed power: 150 kW Supply voltage (± 10%): 400 V Current : 285 A Frequency (± 1%) Hz 50 6x head with 110 mm CD included PLC and touch screen need refurbishment

    Do you need advice?

    We will guide you through the entire process of buying and selling used machinery in a changing and complex international environment. Our sales, logistics, legal, and marketing teams will accompany you throughout the process to make the operation easy and risk-free.

    Contact Us

    First and Last Name *
    Please input your name
    Contact Phone *
    Please input your contact number
    Company *
    Please input your company name
    Email address *
    Please input a correct email address
    City *
    Please input your city
    Country *
    Please input your Country
    Comments *
    Please input your comments
    To continue you must accept Personal Data Processing Policy.