Used Blown film die head

IBC AUTOMATIC DIE PLATE 7 LAYERS Gap: 1.8mm Air Ring: Karat Number of Inlets:8

Technical Specification References : 85% LDPE recycling equipment1. Quality 15% LLDPE CACO3 Thickness: 0.025 - 0.200 mm Die diameter: 350 mm Output depending on die diameter, material and size Cooling ring: 105-30 Inflation rate: > 1 : 3.0 Temp. air cooling : <15°C Output in kg/h : 400 Extruder output 105-30 : max. 550 kg/h LDPE with slip MFI>=1 Components of the installation: 1.0 Extrusion Extruder 1.1 Feed hopper with: measurement and indication of the extruder output control of the weight per metre by adjusting the extruder rpm control from the central console mounted in the control cabinet 1.2 Extruder Evolution 105-30D : gearbox with integrated axial bearing, cooling with ceramic resistors and fans temperature control with heating circuit control and long life Solid State relay in the central cabinet direct drive by frequency-controlled three-phase alternating current motor mechanical screw jack for screws water-cooled grooved inlet area Reiloy 121 cylinder universal screw made of highly wear-resistant special steel high capacity mixer 4 heating zones 1.3 Hydraulic filter holder BDOx2 Plast for 105 mm extruder 1.4 Mass temperature measurement 1.5 Mass pressure measurement Placed in front of the filter holder stops the machine in case of overpressure 2.0 Electrical 2.1 Power supply cabinet For the central supply of the electrical connections for the equipment, including distribution for all components supplied max. rated current. 400 A 2.2 Driving cabinet - Extruder A For an extruder water exchanger for ambient temperatures of max. 70°C. 2.3 Control cabinet with control elements for the following components: On/off extruder Extruder rotation speed by motor potentiometer Fan speed by frequency converter Shooter on / off Pulling speed by motor potentiometer Temperatures per BA 8 control panel 2.4 Basic automation unit GDCB Integrated in the control cabinet Integrated in a central control cabinet, with industrial PC, 10'' TFT touch screen monitor and printer including: control of the surface weight & output of the extruder temperature control representation of trends alarm system 2.5 AC gearmotor for existing 2.2 kW Zocchi drive power hood, frequency converter installed in the system control cabinet. 3.0 Formatting 3.1 Monolayer die head BKF 0400-01-C1 Monolayer die head for die diameters from 120 mm to 400 mm with 3 heating zones and stationary extrusion head support 3.2 Die 350 mm diameter for monolayer die head, air gap for material passage: 1.6 mm 4.0 Cooling 4.1 Cooling ring Cooling ring with 350 mm diameter lip insert 4.2 Internal cooling system one fan for air supply and one for air extraction ultra-sonic bubble adjustment for bubble diameter adjustment with : 2 ultra-sonic cells mounted on the basket arms for non-contact bubble diameter measurement automatic precise adjustment of the internal air flow by an ultra-fast device

Extrusion head DOLCI, 400 mm, fixed, IBC

600 mm DOLCI extrusion head with IBC Reifenhauser cooling ring installed in 1998, with a thickness measuring ring. It is possible to graphically view the thickness of the film on the circumference and print the chart, with the possibility of manual adjustment of the cooling through the 60 fans for the thickness corrections (with a reduced expense, the software can be purchased for the automatic film thickness control). It is provided with a rotation system, if the thickness control system is not used

KIRION 70/100/70 - Weight 11 Tons (2 x 70/30D + 100/30D) 1 Extruder barrier screw 100mm 2 Extruders barrier screw 70mm 3 Singles for cylinder head Complete set with heater cabinets, extruders variators cabinets and connection cables 1 complete die head Kirion 500/700-3 diameter 550mm with 128 zones for thickness control + air ring + connecting elbows on extruders Weight 4 tons 1 complete control cabinet with PC & PLC 1 width measuring unit 3000mm 3 dosing units 6 tanks Plast Control GMK Fans are available with their control cabinet