Used Woven sacks extrusion

Machine Suitable for Rafia Grade PP Sheet Die width 1600mm Heating Capacity 26.5 kW App. with 5 Control zone Type of Lip - Flexible non exchangeable plain lip Line speed 350 mtr/min Max. Screw Speed Max. 103 rpm Barrel Heating Capacity 60 kW 1 Self Cleaning type Screen Changer heating load 9.6 kW 1 Separate melt pressure gauge cum melt temperature sensor Six station indexable Slitter Edge trim recycling unit with mixer Holding Unit - 318mm drum diameter, and 84m/min max. speed Hot air oven 6mtr long combined scratching and annealing unit - 3 standard godets and 2 colling godets Tape Winder Model : LFW 200CM Tape width Range : 1.8 to 4mm Denier Range: 400-3000D Length of Traverse: 200mm Bobbin Core ID:35mm Bobbin Core Length:218mm Maximum Bobbin Diam:160mm Winding Speed:160-450 mtr/min Total winders: 288 (Including Both Side) 40 Circular looms Model Nova 6 (W) – 576 (LF) Working width(Double flat) : 30 - 90 cm at reduced speed : 30 -45 cm & 70 - 90 cm no. of shuttles : 6 no. tapes : 576 Max. weft insertion rate : 960 picks/min 11 Circular looms Model Nova 6 (W) – 720 (LF) Working width(Double flat) : 30 - 90 cm at reduced speed : 30 -45 cm & 70 - 90 cm no. of shuttles : 6 no. tapes : 720 Max. weft insertion rate : 940 picks/min

Extruder unit; DC drive power : 150 kW Melt capacity PP : 450kg/hr Barrel heating power : 24 kW Die width : 1400mm Die heating power : 19,8 kW Manual screen changer Slitter type : single station cutter Holding unit ; Nº of godets (normal) : 2 AC drive power : 3.7kW Hot air oven ; length : 4000mm heating load : 60kw Stretching & Annealing unit; nº of godets (normal) : 3 nº of godets (cool) : 2 Stretching AC drive : 30kw Annealing AC drive : 11kw Max winding speed : 300m/min Approx installed power with 250 winders : 417.220kW Space without winders : 28.2m x 7.4m x 5.5m Space with 250 winders : 44.8m x 7.4m x 5.5m tape width stretched : 1.8mm min tape thickness stretched : 30micron max speed holding unit : 60m/min speed stretching unit : 330m/min spead annealing unit : 300m/min connected load : 417.220kW Spares available : One New screw One Reconditioned screw 150 magnetic winders – make: starlinger

Tape Stretching Line starEX 1500 ES Die width 1800 mm Operating speed max. 500 m/min Working width 1650 mm EXTRUDER Type E 120.33 D TD Strong ground frame with water cooling devices High-precision electrical displacement for longitudinal adjustment Main drive by torque motor with single reduction gearing Bimetallic barrel with water-cooled feeding zone (temperature controlled via processor control) Air cooling and heating equipment Wear resistant feed screw and screw-cylinder VoluTEC- volumetric granulate feeding and three-component dosing/mixing unit Automatic filter system with heating elements. Flat die Reversible die lip Die width: 1800 mm Die lip aperture 0.1-1 mm Edge trim recycling Automatic flat die with automatic adjustment of the lips used for processing PP. The complete lip adjusting system is removable. Only to be used in connection with a scanning gauge and control system for thickness measurement 1500 Water quench with integrated holding unit Take-off with pneumatically operated nip rollers Slitting uniy, pneumatically operated, with cross adjustment, blades and spacers for a final tape width of 1,7-5 mm, one complete spare cutting bar, including 430 industrial blades Two stage drying system Additional film take-off roller with variable drive and pneumatically operated nip roller, for high cutting tensions Hot air oven with controlled heating zones Air flow regulation via smartTRONIC Upper part to be raised pneumatically in two steps Length of heating channel 5,8 m Stretching section with 8 godets (6 hot godets, 2 cool godets) for high speed including protecting cover and hot oil system. Tape extraction – Vacuum system , designed as start-up aid and broken tape catcher built as an aspiration system mainly consisting of suction nozzles, feed pipes and a collecting box for waste tapes. Control cabinets With air conditioning, including the complete wiring within the tape line Mechanical screw extractor Winding machine stacoFIL 200 XE with 320 heads Without balancer Central system Control for yarn tension MSP (multi-stage precision) winding system for perfect unwinding properties Phase Inverter control for the Drive motor On/Off switch for each winder head Yarn tension control by means of strain gauge force sensor. Quick- clamping device by an expansion spindle. An ergonomically designed brake lever stops the spindle, interrupts the power supply to the drive motor and releases the core when pushed backward. Released forward it expands the spindle, the core is centered and locked and the drive motor restarted. Yarn catching device on tip of the spindle, allows easy and failsafe string-up at high winding speeds. High precision traverse mechanism Supporting Frame for installation in one row with maximum 180 winding heads. Winding Ratio: Automatically controlled and adjusted by an electronical mechanism. Tape material PP/HDPE* Tape width 1,8*-6 mm Tape tension control (electronically) Tape tension range (electronically controlled) 40-500 g Denier range 400-3000 Den Tape thickness Min. 25 μm** Standard tape guide Slot-type Special tape guide 2.5, 3, 5 mm Winding speed up to 500 m/min Traverse length 200 mm Vertical arrangement 6 Winders / frame 18

Tape width:1,8*-5 mm Tape tension control (electronically) Yes Tape tension range (electronically controlled):40-500g Denier range; 400-3000 Den Tape thickness: Min. 25µm** Standard tape guide: Slot-type Special tape guide: 2.5, 3, 5 mm Winding speed: up to 500 m/min Traverse length: 200 mm Vertical arrangement: 6 Winders / frame: 18 Core inside diameter: 38 mm outside diameter: 42 mm length; 218mm Maximum bobbin diameter: 180mm Connected load per winder; 0,18 kVA Average power consumption per winder (depending on core diameter, winding ratio and yarn tension): 0,049 kW Smaller tape widths are possible with specially matched winding ratio: > 20µm upon request > 20um Detail description: Operating speed 450 m/min Die width: 930 mm Working width 800 m Die lip aperture 0.1-1 mm Heating capacity approx. 12 kW Control zones 4 Granulate feeding and three-component dosing/mixing unit consisting of: vacuum feeder , elliptic dosing unit for continuously dosing and mixing the main material and two additives, each with a capacity of 0.2-9% of the main component Extruder 105.30D（replacement for standard version extruder 90.30D） Heating capacity approx. 37,8 KW with 138 kW DC motor. Carbon brush monitoring of the driving motor by pilot lamp and rotary reflection signal. 1 Temperature controlled lock-out device for the main drive motor to protect the extruder, filter and flat die against cold start-up. Automatic filter system, between the extruder and flat die for filtering out the impurities of the melt, equipped with heating elements. Filter screen feeding is regulated either pressure-dependent (automatic operation) or manually via a temperature and time controlled heating element; with facility for taking up 20 meters of screen band. Working pressure max. 180 bar depending on raw material to be used. 1 Melt pressure gauge upstream of the filter and combined melt pressure / melt temperature gauge upstream of the flat die with readout on the central control panel of the extruder Components between extruder and flat die in connection with filter system consisting of: 1 static mixer 1 connecting flange to flat die 1 fixture for flat die 1 Flat die with flexible die lip, adjustable by means of pressure screws, flow channels rheologically optimized, in “coat hanger” shape, including heating, wired ready for connection with reversible die lip Edge trim recycling for direct return of narrow edge trims of non-stretched film into the extruder, con­sisting of a film cutting unit and a transport system carrying the chips back to the extruder hopper. Additional film take-off roller with variable drive and pneumatically operated nip roller, for high cutting tensions (on thick films, e.g. required for container tapes), arranged between the water removal system and the slitting unit. Extended Hot air oven with controlled heating zones circulation fans, air speed up to 20 m/sec. air flow regulation upper part to be raised pneumatically length of heating channel 5,4 m air lock preventing cold air from entering the oven during refeeding of tapes Stretching section 6 godets incl. protecting cover and hot oil system consisting of 2 standard godets, 2 heated godets, 2 cooling godets, 2 nip rolls, hot oil unit rated 24 kW, including hoses and fittings and thermostatic temperature control, with frequency controlled three-phase drive, rated power 26 kW, and additional frequency controlled three-phase drive, rated 7,1 kW, for in­dividual adjustment of the annealing ratio Tape extraction – Vacuum system designed as start-up aid and broken tape catcher built as an aspiration system mainly consisting of suction nozzles, feed pipes and a collecting container for waste tapes. Control cabinets with air conditioning, including the complete wiring within the tape line 1 Mechanical screw extractor Winding machine stacoFIL 200 XE with 72 heads Winding machine twinTPAE 200LX with 72 heads This precision take-up cross-winder is especially designed for winding up flat and fibrillated polyolefine tapes on cylindrical cores. It represents the latest state of the art-developments in winding technology. Automatic motor switch-off when brake is activated; after 2 seconds when tape is broken (balancer in down position). Quick-clamping device by an expansion spindle. An ergonomically designed brake lever stops the spindle, interrupts the power supply to the drive motor and releases the core when pushed backward. Released forward it expands the spindle, the core is centered and locked and the drive motor restarted. Yarn catching device On tip of the spindle, allows easy and failsafe string-up at high winding speeds. High precision traverse mechanism Precise transmission ratio is obtained by a reversing scroll shaft driven via inter-changeable gears and timing belts. Computer-calculated curves of the traverse cam provide for extended lifetime of traversing parts and improved bobbin edge stability. Tape guide The standard delivery includes a yarn guide with bonded slot-shape ceramic tape guide. With this standard yarn guide, a large area of tape widths can be covered. In addition there are 3 shoe yarn guides included in the scope of supply Conversion Line Multikon 55 Including Cold Cutting device Including Top Feeding sewing head Max. output - uncoated fabric sacks/min 55 Weight: 60g/m² 10% over lapped Stitch length: 8.5mm With/without BOPP film Without easy open feature With/without side fold Max. Output easy open Stitch length: 7.5mm Mac. Output with handle applicator 40 bags/min Weight of (PP multifilament) thread 1000-2175 den Min. Tensile strength of thread 5 g/den Bag dimension 1000x500 mm Weight of (PP multifilament) thread: 1000-2175 den Min. tensile strength of thread 5g/den Cutting unit double flat fabric width 250 – 850mm length of cut450 – 1390mm max. roll diameter for unwinder 1500mm Standard sewing machine Max. working speed (user adjustable to any level) 4800stitches/min Recommended working speed 4500stitches/min Stitch length (factory setting) 8.5mm Max. stitch length 9 mm Counting and stacking device Max. number of bag stacks 10Pcs. Max. number of bags per stack 100Pcs.

Extrusion line Starex 700s (including 125 winders), made by Starlinger, Austria. Output : 310kg/h, installed in 2004. Flat Die width: 800 mm Die Lip: 0.1-1 mm Heating Capacity 10 kW approx.. Control Zones 4 Max speed: 420 m/min Working width: 700 m Tape width: 1.7-5 mm Traverse length: 200 mm Standard winding ratio: 1: 14,32 Core dimensions of warp and weft bobbins -Inside diameter: 35 mm -Outside diameter: 40 mm -Length: 218 mm Maximum Bobbin diameter: 180 mm Nominal motor rating per winder: 0.12 kW Connected load per winder: 0,13 kVA Average power consumption per winder: 0,048 kW Extruder Type: E 90.30 D DC Motor 1 Temperature Controlled Lock-Out Device Granulate Feeding and 3 component Dosing/Mixing Unit Automatic Filter System 1 Melt Pressure Gauge Edge Trim Recycling Water Quench with integrated holding unit Additional Film Take-Off Roller Tape Extraction-Vacuum System STRETCHING SECTION WTU 6 GODETS AND HOT OILT SYSTEM consisting of 2 standard godets. 2 heated godets, 2 cooling godets. 2 nip rolls, hot oil unit rated 24 kW, including hoses and fittings and thermostatic temperature control, with frequency controlled three-phase drive, rated power 26 kW Winding Machine STACOFIL 200A SFA-0000 with 125 heads 5 Looms, made by STARLINGER, Austria for production of PP fabric for BIG BAGS. Installed in 2013. STACOLOOM SL 62HD Number of shuttles: 5 Working width - double flat: 900-1500 at reduced pick rate: 1410-1500 Weft insertion: approx. 650 Weft density: 2A-75 Revolutions: 110 Number of tapes: 1280 Creel positions: 1296 Core dimensions of warp and weft bobbins:35 inside diameter: 42 outside diameter max.: 218 length: 160 Max. diameter of warp package: 115 Max. diameter of weft package: 200 Length of traverse: approx. 9 Weft bobbin capacity: 1500 Surface winder with balancer: 1200 Cloth width: 1500 Max. roll diameter: 1200 Inside diameter of core: 102 Outside diameter of core: 115 Winder motor rating: 0,6 Main motor rating: 7,5 Connected load: 8,5 kVA Average power consumption: 4,3 kVA Weight (approx.): 2800 kg Basic machine warp bobbin creel - empty: 2x170 kg