Used Complete plants

Fully equipped EPS tableware production line. Brand Inovas. Purchase date 2016-2018 4x EPS CUP THERMOFORM MACHINE Model: InTerm C06 3x EPS CUP THERMOFORM MACHINE Model: InTerm C04 1xpre Expander Model: InPre 50 Plus: Pump ELEKTROR Model: 150-50/1,50 Pump LENZE Model: MDERAXX063-32V1 1x pre Expander Model: InPre 15 Plus: Pump ELEKTROR Model: 150-50/1,50 Pump LENZE Model: MDERAXX063-32V1 Cooler KÜBA AXL 2.0 T 2 x 1500 L Water Tanks Heat exchangers: HYDAC - 2 pcs MODEL: HYDAC HEX S610-70-00/G1 Pump Grundfos Type: CHV2-100 A-W-A-CVBE Pump - Stairs Pumps MODEL: HBI 4-60 RQBE

Complete plant (washing, drying, grinding, repelletizing) for HDPE/LDPE recycling consisting of: Italrec ABUF40 buffer ,year 2013 2 Italrec flotation tanks, year 2013 2 Italrec TK400 presses, year 2013 2 Prealpina ST103OMP presses, year 2016 Grinder Previero MU610 PRT, year 2003, overhauled 2013, rotor diameter 550 mm, width 1000 mm, screen 30 mm, left fixed blade 1x2, right fixed blade 1x2, rotating blade 3x2 Buffer Italrec ABUF40 ,year 2013 Agglomerator Dec1000XP, year 2013 Gamma Meccanica GM250-24D extruder with double degassing, year 2015 Fimic continuous self-cleaning automatic filter changer, year 2013 Cutter/Centrifuge Gamma Meccanica EXT26+ Screen EXT27, year 2013 Chiller Frigel The line also has washers and centrifuges between the 2 Italrec pullers and Prealpina pullers however they are not included in the sale Current production HDPE at about 1800kg/h and LDPE at 1300kg/h. Delivery May 2023

Starlinger RECOSTAR 65 PET iV + Starlinger SSP Reactor 1800 Material it can process: PET flakes from bottles, preforms, sheets, strapping post-consumer after washing process. Regranulating after the Starlinger iV+ process is suitable for food contact applications such as bottle to bottle or bottle to sheet. Screw diameter: 65 mm Output: up to 200 kg/h, depending on material type and feed speed (at low viscosity it produces 200 kg/h). Material feeding system: -Pneumatic feeding system for pre-dryer. PET flakes are fed into the pre-drying unit at the top of the Extruder. The material is dried, heated and crystallized by applying hot air. Combination of Extruder with pre-dryer. After drying, the material is fed into the extruder by a speed-controlled metering screw. Material processing: Forced feeding by auger screw. Double degassing (vacuum) Pelletizing system: Spaghetti pelletizing, water cooling Filtering system: double piston filter changer, continuous (2 filters of 140 cm2 each). Additional equipment: -Operator interface terminal -Heat exchanger -Bath, L 6000 x W 600 mm -SSP (solid state polycondensation) reactor Storage silo incl. feeding system, 300L REACTOR : Output capacity PET : up to max 250 kg/h Preheater vessel - capacity : approx 70l Reactor vessel capacity : approx 1800l Cooling vessel capacity : approx 70L *Oil heating system : Installed heating capacity :30 kW Nominal rating of the pump : 5.5 kW Circulating oil : approx 140l Max circulation temperature : 250 · Stirrer drive : Nominal rating of the agitator : 0.37kW Stirrer speed : approx 9.4min-1 Gas scrubber-condenser : Cooling surface : 1m2 Space requirements of the SSP reactor with stairs : Length : 3560mm Width : 3800mm Height : 6200mm CRYSTALLIZER : Output capacity : up to max 700kg/h Crystallization funnel : 1000L *Air heater : Installed heating capacity : 45 kW Nominal rating of the blower : 12.5 kW Agitator drive : Nominal rating of the agitator : 1.5kW Agitator speed : 5.9min-1 Dust filter : 2 filter elements Space requirements of the crystallizer : Length : 2220mm Width : 1270mm Height : 4242mm The machine is very well maintained, it has many new engines and pumps from last year. It also comes with spare parts (About 15.000€ in spare parts) Air compressor & cooling equipment are not included

2x EPS Thermoform machine Brand: Inovas Model: C06 Year: 11/2017 Max. Number od molds: 6 Weight: 200kg Dimensions LxDxH: 2000mm x 1100mm x 1800mm AIR Connection: 12mm Pressure: min 6bar Consumption: 0.3/0.4 m^3/min COOLING WATER: Connection: 1/2 " Pressure: min 4bar Temperature: 25-40 C Consumption: 0.4 m^3/h STEAM Connection: 3/4" Pressure: 2.5-2.9 bar Consumption: 40 kg/h ELECTRICITY 1 phase 100-240 volt 1x PreExpander for EPS Brand: Inovas Model: InPre50 Year: 2017 Consisting of: -Fully automated Batch Pre-expander unit Size LxWxH 1000mm/800mm/2000mm -Air Blower-2pcs -Pre expanded material silo 3m^3 AIR Connection: 10mm Pressure: min 6bar ELECTRICITY Supply: 3 phase 380/415 volts Installed heater: 7.5 kW Air blowers: 2x 1.5kWh Total power consumption average: 8kW PRODUCTION CAPACITY: 45-50 Kg Eps per hour (Could supply 6-8 cup making machines) Density: 40-70gr/litter Steam Consumption: 5Kg/h at 2-3 bars 2x PICK-OUT STACKER

Working hours: 14.000 approx. Installed end of 2019 Output: 850 - 1050 kg/h The unique combination of the predrying unit/extruder enables the optimal preparation of the PET pre-ground material before it is fed directly into the extruder, which is using the generated heat. The final product is melt-filtrated, uniform and dry pellets, with flow characteristics like virgin resin. Solid State Polycondensation The continuous Solid State Polycondensation increases the viscosity of PET depending an the chosen residence time in the reactor. Furthermore, decontamination takes place (letter of non-objection of the FDA authority issued in June 2004 and October 2007) as well as reduction of acetaldehyde. End product is crystalline pellet with virgin resin characteristics. Material to be processed: PET bottle flakes, washed post-consumer waste, clean (without PVC and paper, abrasive or metallic contamination), dry (max. 1.0 % surface moisture). Material pre-ground. Recommendation for flake specification: -Surface moisture: max. 1.0 -PVC (flake, label) content: max. 50 ppm -Glue content: max. 4.000 ppm (flakes included) -Yellow flakes (UV-degraded, blocker, oil bottles): max. 4.000 ppm -PA content max. 50 ppm -pH value: neutral (pH+/- 0,5) -HDPE / PP content: max. 20 ppm -PET dust (particle size < lmm): max. 1 % -Metal content: max. 50 ppm -Wood, paper, cellulose: max. 20 ppm -Silicone, rubber content: max. 20 ppm -Other contamination: max. 10 ppm -Flake size: 4 - 14 mm -Bulk density min. 290 g/I PART 1 recoSTAR PET 125 HC IV+ FEEDING SCREW FOR HOT AIR DRYER HAD1500 INCL. METAL SEPARATION Metal detector for all metallic materials (such as Fe, Ni, Co, stainless steel, Cu, Al, CuZn, Pb). Detecting:Fe ball D 1.5 mm HOT AIR DRYER HAD1500 This unit is recommend for higher moisture levels of the input material and/or for increased drying time and improved final material quality. / In the hot air dryer hot air heats up the material. This process dries the material and serves for optimum preparation of the material prior to extrusion. Vessel diameter:1000 mm Vessel volume:1500 L Heating capacity:34/45 kW Agitator speed:—6 rpm EXHAUST AIR FILTRATION FOR HAD 1500 Continuous air filtration via cyclone including a dust collecting box which collects the separated dust. Manual emptying can be done without interruption of production. FEEDING SCREW FOR PREDRYING UNIT PDU3700 ' . The PET flakes are fed directly into the predrying unit by a feeding screw PREDRYING UNIT PDU3700 FROM PIOVAN WITH DRIED AIR INCL. AIR FILTRATION AND CONDENSATE SEPARATOR SURCHARGE FOR GAS HEATING FOR PREDRYING UNIT PDU3700 EXTRUDER EXP125 HC WITH HIGH VACUUM UNIT H-VAC Including melt pressure sensor, melt temperature sensor, and control air conditioning for electronical components and control panel. The extruder barrel is of a bimetallic design. The screw is nitride-hardened and armor-plated. The extruder screw plasticizes and homogenizes the material. The extruder screw is driven by V-belts and optionally speed-controlled. The extruder is equipped with a melt pressure display. The material is fed into the extruder by a speed-controlled dosing screw. Extruder screw:125 mm Extruder L/D:24 Extruder power:160 kW AC Screw speed:105 rpm (depending an material) Melt pressure display & alarrn.Yes Melt temperature display:Yes UNDER WATER PELLETIZING UWP7OCC WITH INLINE CRYSTALLISATION (CLOSED WATER CIRCUIT) FILLING STATION 1000 L AFTER EXP INCL. DIVERTER VALVE AND PIPING (PELLET TEMP.CM UP TO 150°C) 0 Storage silo volume: 1000 L PART 2: viscoSTAR 120 (FoR 1050 KG/H— APPROX. 9.3 H RESIDENCE TIME) FEEDING SCREW (FROM UWP TO CRY1000) The feeding screw serves for pellet transport between the UWP and the crystallizing unit. Execution in stainless steel and heat insulation proves a heat saving pellet transport. CRYSTALLIZER CRY1000 INCL. AIR FILTRATION Crystallization of the pellets by using the residual heat from the melt, including heating, optimized in energy consumption. FEEDING PARTS FOR SSP Incl. Outlet valve for CRY/PCU, suction box and lances. viscoSTAR 120 BASE UNIT INCL. PREHEATING, COOLING UNIT, ETC. The preheated, predryed pellets are transported via a vacuum transportation system to the preheater at the top of the reactor. The pellets get heated in the reactor preheater to reaction temperature, then set under vacuum and Ioaded to the reactor vessel. Inside the electrical heated reactor vessel the reaction takes place and the iV of the pellets is increased according to the adjusted time in the reactor. After the adjusted reaction time the batch is taken out of the reactor with a special designed outlet device to prevent mixing of pellets and vacuum. In the cooling chamber the pellets are cooled down to a temperature which is lower than reaction temperature before being discharged to the piping system for transport to an intermediate storage silo. Volume preheater:approx. 250 L Preheating capacity:max. 600 kg/h Number of preheaters:2 Compressor:2 x 30 kW Air heater:2 x 75 kW Volume SSP reactor:12000 L Heating capacity reactor:12 x 6 kW Vacuum pump:3 x 7.5 kW ENLARGED MAINTENANCE PLATFORM FOR VISCOSTAR Stairs with railings replace the standard ladders which enables easier and comfortable access for maintenance. 3 X WATER HEAT EXCHANGER FOR viscoSTAR 120 (REQUIRED FOR AMBIENT TEMPERATURE >35°C) HIGH TEMPERATURE FEEDING SYSTEM INCL. FILLING STATION 1000 L FOR SSP FINAL MATERIAL Storage silo and pipe in a soundproof design. Frame provided with big bag holding facility. Storage silo volume:1000 L ENERGY RECOVERY KIT ERK1200 The system consists of a pellet-air heat exchange system which enables the reuse of the residual heat of pellets after an inline-crystallisation or after the SSP¬process. All components which are in contact with the food grade pellets are made of stainless steel or alloy. PELLET WATER COOLER PWC1200 (PELLET TEMP. <70°C) In case lower pellet temperature is required this unit is recommended. Water runs through coolings spirals that chill the surrounding pellets. HIGH TEMPERATURE FEEDING SYSTEM (viscoSTAR120 -> FILLINGSTATION 1000L AFTER EXTRUDER) Includes Chiller