Printing Width: 870 mm
Web Width: 920 mm
Printing Repeat (Max): 600 mm
Printing Repeat (Min): 260 mm
Plate-Thickness, Sticky Back Included: 1.64 mm
Substrates: LDPE: 20 - 150 my LLDPE: 12 - 100 my HDPE: 10 - 150 my BOPP: 12 - 60 my PET: 12 - 50 my OPA: 15 - 50 my CAST PP: 20 - 70 my compounds up to: 150 my paper from 40 to 80 gms.
Minimum film width: 50% of the working width
Mechanical speed: up to 300 m / min, depending on the quality and processing characteristics of the job and pressure specific factors.
8 Pneumatic Ink Pumps
Automatic washingsystem SELF CLEANING EXCITINK LITE with integrated ultrasonic visco:
Is an automatic and single-pump washing system. The balance between the incoming and the returned color allows optimum printing of the ink in the doctoring chamber during printing operation.
This is especially recommended for high speed presses. The system consists of the following components:
- The complete unit is integrated between the machine panel and the printing unit frame. Divided into individual units per inking unit.
- A pneumatic paint pump per unit for the supply (3/4 ") and return (1") of the color. The pump frequency adapts automatically to the machine speed.
- Universal lid for all Comexi's color containers (20, 30 or 40 liters). Including filter, magnet and stirring system NATURAL MIXING, allows the installation of the pneumatic stirring system.
- The system uses the 20l color container from Comexi.
- The system is electronically controlled.
Stainless steel piping between the inking units and the paint tanks. Equipped with:
- A set of viscosity regulators is integrated into the inking system and is automatically cleaned by the selfcleaning unit.
The washing system can be programmed for the following three applications (for one inking unit or at the same time for all inking units):
1. Quick wash , 2. Standard washing 3. Intensive washing
The time required for a complete washing process to clean all inking units is between 4 - 5 min.
Automatic system for register presetting of all colors at the beginning of the work by the video camera. The system uses the AVT Prelude observation system and the Comexi electronics.
1.- Automatic system with CINGULAR DOT2: Cingular DOT² does the automatic register adjustment of the work by the real pressure, with a single point of 1.5mm (the same in all plates).
* Meters for the adjustment: 35 meters * Results of the observation view: 20 meters
2.- Semiautomatic system with iREG: iReg: makes the semiautomatic register customization of the work of all printing works.
Cross register adjustment: The cross registers are remotely controlled by electrical servomotors
Automatic lateral web guide before printing, BST, type OPG, by scanning the material edge with motorized ultrasonic cell with 2 sensors and 1 motor
Automatic lateral web guide before rewinding, BST, type OPG by scanning the edge of the material or the printed line with photocell.
INSET CONTROL Allows you to reprint a previously printed material in the register of the first print.
Shaftless Mono Unwinder for reels up to 1,000 mm diameter
Maximum reel weight: 1,000 kg
Two steel pneumatic tension shafts for unwinding, diameter 152 mm.
The web tension in the unwinder and the rewinder is automatically controlled by a pneumatic compensator
Shaft diameter: 76.510 mm
Web tension: Min: 20 N, Max: 350 N
1 CUTTING DEVICE THROUGH KNIFE BLADES
Included: - Three knife holders.
1 EDGE SUCTION : Device for sucking edge sections with fan motor. Brand Kongskilde
SIEMENS PLC control
Pneumatic system: SMC / FESTO
AC Motors: SIEMENS
Bearings: FAG / SKF / INA
Electric components:TELEMECANIQUE Push boards:E.A.O.
DRYING SYSTEM: with hot air
Maximum intensity and power: 265A / 156 kw
Power supply: ATEX 100
Water supply system
Pressure: min. 1.5 bar - max. 2.5 bar
Water consumption: Central cylinder: 20 L / min. Cooling rollers: 20 L / min. Total: 40 L / min.
Non-lubricated, dry and filtered air
Filter under 20u.
Required pressure: 7 bar +1 bar.
Sleeves: 8 pcs from each
Diameter of the shafts: 63 mm
inner diameter Anilox sleeves: 127.443 mm
outer diameter Anilox sleeves: 152.788 mm
400/3,5 2 pcs
400/3,2 4 pcs
340/6 1 pcs
160/12 1 pcs
280/9 1 pcs
360/4,5 1 pcs
Guarantee: Without guarantee
Current condition: In Production
Availability: 2 - 3 months