Used Baling press

FAES HORIZONTAL INDUSTRIAL PRESS Bale length : 1.000 mm Bale width : 800 mm Bale height : 750 mm Bale weight (max) : 250-300 Kg. Number of bindings : 3-4 Manual tying Power : 15 kW Pressing force : 30TN Output : 3-4 bales/hour

HSM HL 4010 HORIZONTAL INDUSTRIAL BALER CHARACTERISTICS Bale length : 1.100 mm Bale width : 750 mm Bale height : 750 mm Bale weight (max) : 300 Kg. Number of bindings : 3-4 Automatic Binding : Quick-Link Power : 7,5 + 1,1 kW Pressing force : 425 kN Output : 3-4 bales/hour Press length : 5.640 mm Width of press : 1.674 mm Press height : 2.500 mm Weight : 4.450 Kg HORIZONTAL BALING PRESSES HSM The HSM horizontal format balers are designed for all types of companies and industries, including waste management. In addition to paper, cardboard and plastic sheets, they are suitable for compressing various highly expandable materials in hard plastic, foams, styrofoam and hollow parts and even sheet metal buckets, drums or tires. The bale presses of the HL series have a large filling opening for easy emptying of the material to be pressed and are particularly efficient in low space requirements.

Pressing power 520/260 kN/bar Cutting power 630/315 kN/bar Throughput depending on the material to be compacted Bale density depending on the material to be compacted Channel cross-section (height x width) 50 x 1,100mm Filling opening of the hopper (depth x width) 1020 x 1,040mm Drive power - internal gear wheel pump 1 x 45 kW Drive power 1 x Q = 380 l/min Approximate maximum width 2,100mm Approximate maximum length to end of pit 9,800mm Approximate maximum height to upper edge of attachment 4,000mm Approximate total weight 16,000kg Maximum operating pressure 315bar System pressure 260bar Disonnected in March 2023, untill then the press was fully functional

This baling press provides a solution for the treatment of waste by compacting (generally cardboard, plastics (PVC, PET, HDPE), crates, cans, bottles, etc.) while taking advantage of the small footprint of this type of equipment. Robust metal construction Powerful hydraulic cylinder Two sided metal doors (side opening, left hand hinges) Front and rear anti-backflow notches Bale weight : +/- 300Kg (variable according to material) Simple manual tying from the front (ideally with textile strap) Side forks for handling Technical details : Inside dimensions : 124 x 95 x 160 cm Motor power : 5,5 kW Piston surface : 124 x 90 cm Loading height : 110 cm Bale size: 124 x 95 x 80 cm Max depth (open door) : 245 cm Number of strip passages : 4

This baling press provides a solution for the treatment of waste by compacting (generally cardboard, plastics (PVC, PET, HDPE), crates, cans, bottles, etc.) while taking advantage of the small footprint of this type of equipment. Robust metal construction Powerful hydraulic cylinder Two sided metal doors (side opening, left hand hinges) Front and rear anti-backflow notches Bale weight : +/- 300Kg (variable according to material) Simple manual tying from the front (ideally with textile strap) Side forks for handling Technical details : Inside dimensions : 124 x 95 x 160 cm Motor power : 5,5 kW Piston surface : 124 x 90 cm Loading height : 110 cm Bale size: 124 x 95 x 80 cm Max depth (open door) : 245 cm Number of strip passages : 4