Used Washing Plants

Washing equipment for rigid plastics PS & PP - 80kg/h. Working hours : 952 *1 conveyor 3 meters long, 30cm wide. *Grinder G4040L3 11 kW Rotor dimensions : diameter 400x400mm Knife width : 375mm Fixed blades : 2 Rotary blades : 3 3 screens with Ø 8, 10 and 12mm holes (+ one set of knives) Main motor power : 11 kW *Dewatering Auger CCSV Auger diameter : 150mm Auger length : 2500mm Power : 1.1 kW *Horizontal centrifuge CF300 11 kW Jack lifting system : standard Automatic cleaning system Rotor diameter : 300mm Rotation speed : 1500 rpm Total installed power : 11 kW *Blower : 1.5 kW Blowing fan type VR Standard Ventilator power : 1.5 kW *1 Big Bag equipped with cyclone and dust collector *Electrical cabinet and control panel for all the equipment. This line was used to grind and wash plastic cups.

PCR (Post-Consumer Recycled) washing line consisting of : Feeding Manual sorting Trommel Recuprod/Eurotecno Grinder Bruno Folcieri model TOP 1200X600X630 RC WET, year 2006 Water centrifuge Recuprod Washing machine Recuprod/Eurotecno Centrifuge Recuprod/Eurotecno Rinsing machine Recuprod/Eurotecno Drying centrifuge Maquireplast Silo mixer of 18m3 Maquireplast year 2018 Grinder Eurotecno, model 120 year 2005

Capacity: 500 kg; 16 KW; 220/380 v. Weight: 700 kg Size: 3000x1500x1200

Ekolinia/Zerma WE 200/ZPS 1200 PE and PP washing line Line components: 1. Shredder ZERMA ZPS 1200; year 2019 2. Discharging/feeding conveyor; Zerma; year 2019 Horizontal length 2 m Inclined length 6 m Discharging high 4 m 3. Washing/separating tank for flakes; Ekolinia; year 2019 4. Mechanical dryer – for preliminary drying; Ekolinia, year 2019 5. Mechanical dryer – for final drying; Ekolinia, year 2019 6. Discharging suction system Water consumption: 1-2 m³/h Final surface moisture: 8-10% Flakes dimension: 40 mm/ 80 mm Another line with the same configuration is available: Zerma Shredder year 2016; Ekolinia components year 2022 (price on request)

Mechanical Dryer / Centrifugal Washer. Has only 100 working hours. Is sold since is not suitable for their process Screen basket diameter 900 mm Working length 1450 mm Screen perforation (standard) 2,5 mm Through up to (t/h): Rigid plastics 2,5, Films 1 Height with Open Mouth is 3,7m Can be used for Agricultural film , PET bottles , Battery boxes , HDPE material This unit can be used as a dryer or as an dry intensive washer. The mechanical dryers operate as a centri­fuge for film, regrind and mixed plastics. The wet fractions and the fines are mechanically dried in this centrifuged dryer and at the same time the contaminations are removed by the high impact energy and then will be evacuated. As an intensive washer, this unit uses a high volume of water to remove contaminates such as paper la­bels (pulp) from the fraction. For the washing of the flakes, there comprises a housing in which a special high-speed agitator rotates, a polygon shaped screen basket made from stainless steel, double outboard bearings, mechanical cleaning device for the screen surface pneumatically opera­ted with additional rinsing device. Models T 508-T 2015 (Rotor and housing is in mild steel, housing inside is special protected by 2K paint). Rotor wings at the ends are fitted with bolted wear plates. The feedstock that has contaminates or a high percen­tage of paper, an automatic mechanical cleaning scraper is used on the exterior surface of the screen drum. Special features: -Considerably higher drying efficiency due to an op­timized paddle-shape and position. Up to 50% higher drying performance with films compared to former rotor generations. -Better access; even the preceding dryers already were equipped with hingeable housing covers; the covers of the new generation 1016 and 2016 can even be hinged open on tow sides. A total removal of the housing cover with the help of a fork truck or a crane. - Better anti-wear protection for the screens. -Better anti-wear protection for paddles. Our stan­dard paddles are made of an wear-proof material. For particularly abrasive materials there a re paddles with a welded-on anti-wear protection. - The standard version of our housings (starting with size T 1015) is galvanized, no corrosion problems. -For materials with bad flowing properties there are dryers with forced feeding via screw bunkers. Composed of: 1-Material conveying blower type MFT 55/500 with drive motor 11 kW,cyclone separator with frame 2-Screw conveyor unit. For uniform feeding from dry cleaner L approx. 5000 mm D approx. 300 mm 3-Dry cleaner T 1015 Consists of the cabinet, a rotor, a polygonal screen basket made of stainless steel (unhardened),double, external bearings; replaceable wear plates on the rotor blades. screen basket diameter: 950 mm working length: 1400 mm screen perforation: 2,5 mm Drive: 55,0 kW 4-Platform and steel structure for dry cleaner For the purpose of elevation of the dry cleaner, necessary steel structure with platform and access stair 5-Auxiliary blower Material conveyor blower type MFT 18/180 with drive motor 1,5 kW 6-Discharge screw with rotary valve 315/480 L approx. 4000mm D 150mm