Used Sleever for PET bottles

Looking for a used Sleever for PET bottles? Visit us to see our selection for sale!
The Sleever shrink sleeving machine is designed to apply a plastic liner to products. This machine consists of a conveyor, a shrink unit, a cutting unit and an unloading unit. The conveyor feeds the products to the heat shrink unit, which applies the shrink sleeve to the product. The sleeve is attached to the product with heat that causes it to shrink, thus insulating and protecting it and sometimes labelling it. The most popular brands are Sleever international, FINPAC, GRAHAM, COMAG and SCALIGERA.
  • Used Beverage Machines
  • Used Blow Molding Machine
  • Used Compounding Machines
  • Used Dairy Machine
  • Used Film Converting Machines
  • Used Film Printing Machine
  • Used Film Extrusion Machines
  • Used Injection Moulding Machine
  • Used Pipe Extrusion Machine
  • Used Profile Extrusion Machine
  • Used Recycling Machine
  • Used Thermoforming & Sheet Machinery
  • Used Fruits and Vegetables Machines
  • Other Used Machines

    • Machines sold in the past:

    Scaligera Sleeve machine from 2013 Model ULISSE 6000 + HOT AIR TUNNEL from 2013 MODEL TA4L Max. capacity 8000 pc/h Min/Max diameter of container (Neck) – 40/115 mm Outside diameter of foil roll – 400 mm Width of folded foil (layflat) – 45-180 mm Cutting length – 30-250 mm Time of changing format – 5-10 minutes Putting sleeve on the twist off seal 190 g glass bottle Working hours aprox. 20.000 Available immediately!
    Used sleever for PET/Cans/glass bottles Production: 2000 cph Includes oven and sleever Machine disconnected but it is possible to be tested in dry cycle
    GRAHAM A36038 Sleeve machine Year of construction: 2005 Modernization: 2014 - 2018 Parameters of original roll: shaft: 256, max. d: 600 mm. Sleeve parameters: sleeve width: 140 mm, thickness from 0.4 mm. Production speed: from 200 pieces per minute. Materials can be processed by the line: PVC, PET, OPS. Tools are available to make decoration of D95 cups (included in the offer) For cups and round jars diameter up to 95 mm Including: Jacob’s Ladder & Overhead Cup Transfer Belt (Left hand feed) Manufacturer: Mould & Matic Year: 2006 Capacity: 550 products per minute (maximum) Number of ladder steps: 32 Cup De-nesting Unit Manufacturer: Van Dam Year: 2005 Capacity: 550 products per minute (maximum) Cup Alignment Unit Manufacturer: Greiner GB Sleeving Machine: Sleeve Unreeling Unit, PUK belt and Sleeving head replaced with units from BLINK Ovens: steam tunnels from BLINK Manufacturer: BLINK Restacker Manufacturer: Van Dam Year: 2005 Capacity: 500 products per minute maximum. Depending on the product In very good condition, well mantained and immediately available!
    Sleever Brand Sleever International Type Sleevercombi Steam 100 SL 2 V - 600 / 300 Manufactured in 2015 For 65 ml milk drink bottles Capacity 32'000 bottles / hour Working hours 25.000 In very good conditions and immediately available!
    Shrink film SLEEVER - COMAG srl (Italy) TYPE ROTARY WITHOUT OVEN - it is working with steam 2 bars. MODEL ISLA 24 YEAR OF CONSTRUCTION 2007. WORKING HOURS 4.600 h. FORMATS a.PET 1500 ml/diameter 88 mm - speed 10.000 bph b.PET 500 ml/diameter 63 mm - speed 15.000 bph c.Glass 232 ml/diameter 64 mm - speed 12.000 bph All above formats available. Electrical cabinet with siemens plc and and siemens servodrives - rittal a/c. Machine in working condition until mid February 2019

    Do you need advice?

    We will guide you through the entire process of buying and selling used machinery in a changing and complex international environment. Our sales, logistics, legal, and marketing teams will accompany you throughout the process to make the operation easy and risk-free.

    Contact Us

    First and Last Name *
    Please input your name
    Contact Phone *
    Please input your contact number
    Company *
    Please input your company name
    Email address *
    Please input a correct email address
    City *
    Please input your city
    Country *
    Please input your Country
    Comments *
    Please input your comments
    To continue you must accept Personal Data Processing Policy.