Moulds for Preforms. HUSKY Cold Half System HyPET 120 year 2016 Neck PCO 1881 Weight 22.7 g, for 350-450 CSD Model: 32 50x130 GEN 3.5 Stroke 63 mm Max Capacity: 134t Shot Counter: Around 117,000 Set of new core change for 22.28g can be purchased to an additional...
2016 | 300043001 | HUSKY
More information
Moulds for Preforms. HUSKY Cold Half System HyPET 120 year 2017 Neck 3025 Weight 17g, for 500-600ml water bottle Model: 32 50x130 GEN 3.5 Stroke 60 mm Max Capacity: 88t Rec. Capacity 85t Complete refurbishment done by HUSKY in 2017 Perfect condition and availa...
2012 | 300042893 | HUSKY
More information
Moulds for Preforms. M PET Mold Masters Hot Runner for HUSKY HyPET 120 Year 2013 Perfect condition and available immediately! ...
2014 | 300042892 | MOLD MASTERS
More information
Moulds for Preforms. Husky cold half and robot plate Weight 9.5gr Neck: 26-22.12 P3 Cycle time: 6,7 sec Take out plate included 7.066.300 shots...
2014 | 300043450 | HUSKY
More information
Moulds for Preforms. HUSKY Cold Half System year 2017 Neck 38 mm Weight 76 g Model: 16 63.5 x 160 Gen 3.5 Stroke 114 mm Max Capacity: 104 t Used in a HyPET 120 In perfect condition and available immediately...
2017 | 300047425 | HUSKY
More information
Moulds for Closures. Used 72 cavities molds for caps and closures Brand: Corvaglia Year: 2017 Neck: 29/25 Weight: 1,45gr Cycle Time: 3,9 sec Mold available immediately! ...
2017 | 300047934 | CORVAGLIA
More information
Moulds for Closures. Used 72 cavities molds for caps and closures Brand: Corvaglia Year: 2018 Neck: 29/25 Weight: 1,45gr Cycle Time: 3,9 sec Mold available immediately! ...
2018 | 300047937 | CORVAGLIA
More information
Moulds for Closures. Husky Hot runner from 2008 Rouxel watercap cold half with the slitting machine Taiwan hwa long without the thermocontroller PMS Mold Master Mold is working condition Neck 30/25 2gr 16 cavities Mold runs at 6,5 sec Dimensions of the mold: 885 x 380 ...
2008 | 300039326 | HUSKY
More information
Moulds for Closures. Plastisud Mold (Made in France) Mold: 72 cavities Format: 30/25 low Weight: 1,82 gr Manufacturer: Plastisud Mould dimensions : Width 640 x Length 1 590 x Thickness 700 mm Press : Netstal Synergy 3500 Guaranteed cycle time with cooling to temperat...
2007 | 300041699 | PLASTISUD
More information
Moulds for Preforms. Used cold Half for preform Brand: Husky Weight: 12.5 gr Neck: 29/25 for still water Cavities: 96 cav. Pitch = 50 x 140 HPP 4.0 Mould number of shots: 305.185 take out plate ( with 384 pcs of tubes )+ coolpik tubes ( 96 pucks and 288 pcs of tubes):...
2014 | 300044628 | HUSKY
More information
Moulds for Closures. OMMP injection mould for fruit-oil closure 29/21, year 2012 16-cavity mould Neck: 29/21 edible oil Approx. weight: 1.7g Material: LDPE 8.1 million shots Includes: - Hot runner system Yudo. - Heating thermostat with connection cables (Multitherm 4...
2012 | 300045927 | OMMP
More information
Moulds for Preforms. Complete Husky mold Hot runner, robot plate , cold half included 72 cavities, PCO 1881 26.3g + 27.1g Length 122mm, diameter 22.6 ...
2008 | 300048033 | HUSKY
More information
Moulds for Preforms. Complete Husky mold Hot runner, robot plate , cold half included PCO 1881 28.5g + 30.7g Length 122, diameter 24.8...
2008 | 300048035 | HUSKY
More information
Moulds for Closures. Husky mold for closures PCO 1881 from 2007 Cap weight 2,3 g for highly carbonated drinks, water etc. 48 cavities Mold after service and replacement of several molding elements Available immediately...
2007 | 300046736 | HUSKY
More information
Moulds for Closures. Corvaglia cold half for closures Manufactured 06/2002 Material = lPE Product = Closures 30/25H Product Mass = 2,10g Cycle Time = 4,8 sec Cavities = 48 Working on Husky H225 Available immediately ...
2002 | 300035299 | CORVAGLIA
More information
Moulds for Closures. Complete Corvaglia mold Neck 30/25 Weight 1,8g Cavities: 72 Cold Half and Hot runner Mold was working in a Husky H300 Mold has 25 milions cycles Stored inside a box with anticorrosive oil Available immediately ...
2008 | 300039302 | CORVAGLIA
More information
Moulds for Closures. Used cold Half for caps and closures Brand: Husky Weight: 1.75 gr Neck: 30/25 for still water Cavities: 48 cav. number of shots: 239.816 HotRunner not available ...
2016 | 300044651 | HUSKY
More information
Moulds for Preforms. Husky cold halves and conversion set 1- 72 cavity for 29/25, preform weight: 25,9 gr, 50V x 120H, platform HYPET5e 2- 72 cavity for 29/25, preform weight: 12,1 gr, 50V x 120H, platform HPP5e - Core conversion set for 29/25, 10,10 gr, 72 cavity...
2022 | 300047057 | HUSKY
More information
Moulds for Preforms. Used Cold half and robot plate for Husky injection molding machine Weight of the preform 30.4gr Neck: 26-22.12 P1 gravity II Lenght of the preform 119,20 mm Take out plate for the robot included the hotrunner is not included Mould stored Number o...
2016 | 300043449 | HUSKY
More information
Moulds for Preforms. Complete Husky mold Hot runner, robot plate , cold half included PCO 1881, 29.8g Length 118, diameter 24.95 PCO 1810 28.4g + 31.5g Length 122, diameter 24.95 ...
2008 | 300048034 | HUSKY
More information
Moulds for Closures. Used complete mould for caps and closures Brand: home made by the seller in Europe Weight: 2,5 gr Neck: 38 mm for Milk and Juices (old Tetratop packaging) Cavities: 12 cav. number of shots: 938,328 the mould can be be tested Available immediatel...
2007 | 300045226 | HOME MADE
More information
Do you need advice?
We will guide you through the entire process of buying and selling used machinery in a changing and complex international environment. Our sales, logistics, legal, and marketing teams will accompany you throughout the process to make the operation easy and risk-free.