Liquid Filling Machines

Filler and capper Irundin from 1993 for 8L Monobloc 12/4 12 filling valves and 4 capping Capacity 1.200 bph Still in production, available in March 2025

CFT Packaging SBC TRI BLOCK - rinser, filler and capper 2010 Rinser- 60 valves Filler- 80 valves capper- 15 valves The pitch is 113. Filling carbonated products Can run 330ml, 500ml and 698ml at 36,000 b/h and 1l and 1.5l at 18,000 b/h 60,000 working hours In production

Used monobloc for PET and Glass bottles Pitch: 113mm production: 12.000 bph format parts for 1.5 and 2.0 L PET filler also suitable for filling 1 L glass bottles the machine will be in working conditions until end of september 2025

TRIBLOC isobaric filling line (Rinser - filler - capper) KOSME for PET bottles, year 2012 Model: Isoblock NH 20/960 1T UP + 20/960 5/240 FC Only 4000 hours of use Bottle sizes: Volume: 250 ml a 1.5 L Capacity: 5.500 bph Rinser stations: 20 Filling valves: 20 (isobáric) Capper heads: 5 (plástic by AROL) Bottle handling: neck of the bottle Cap delivery system: Pick-in-Place - Gasification equipment: Nitrogen application: Installed Connection for CO₂ tank: Pre-installed for carbonation - Cleaning system: Application Integrated knot valve and peroxide dosing system - Replacement parts: For 28 mm and 38 mm necks Additional parts for different bottle sizes and caps included - Cap dispenser: AROL automatic cap feeding system - Control system: Full PLC automation It is installed in a sterile room, in excellent condition and available immediately!

Used Aseptic filler Gea Procomac Monobloc Filler and capper Fillstar CX PET2 AS 120.25.113 Bottle discharge tunnel Foil induction sealing tunnel Sterilizable caps elevator Tunnel for the pre-sterilized caps feeding Peracetic solution automatic titration system Formats:2,0 L – 1,5 L – 0,5 L – 0,33 L – 0,25 L Output- 1.5 liter- 30,000 b/h 0.5 liter- 36,000b /h Product: “High Acid” still products (pH < 4.5) still and carbonated “Low Acid” products (Ph >4.5) Products specifications Brix 0-16 Minimum conductivity 5 mS/cm Viscosity: 1-15 cp (filling with contact) and 1-50 cp (filling without contact) - 4 Amount of pulps and fibres for still products up to 10% w/w Amount of pulps and fibres for carbonated products up to 2% w/w - 5 Size of pulps and fibres 2 mm width, 18 mm length for still drinks (for carbonated drinks max 1 and 5 mm). Fruit content 0 – 100% CO2 content up to 6 grs./liter for carbonated products in aseptic conditions - 6 Bottles: Material: PET Formats: 2,0 L – 1,5 L – 0,5 L – 0,33 L – 0,25 L Dimensions: Min height: 140 mm Max height: 350 mm - 7 Min diameter: 80 mm - 8 Max diameter: 108 mm Filling: Still product: no contact between bottle and fill valve Carbonated product: contact between the bottle mouth and fill valve. Temperature: min 20°C max 30°C (indicated minimum temperature is mandatory, to avoid moisture formation within the sterile environment). - 9 Oxygen Pick-Up (during bottle filling): max 1 ppm Accuracy: With still drinks: Product without pulps * Maximum tolerance per volume < 1200 ml: sigma 2 ml * Maximum tolerance per volume > 1200 ml: sigma 2,5 ml Product with pulps * Maximum tolerance per volume < 1200 ml: sigma 2,3 ml * Maximum tolerance per volume > 1200 ml: sigma 2,8 ml With carbonated drinks: Product without pulps * Maximum tolerance per volume < 1200 ml: sigma 1,8 ml * Maximum tolerance per volume > 1200 ml: sigma 2,3 ml Product with pulps * Maximum tolerance per volume < 1200 ml: sigma 2,1 ml * Maximum tolerance per volume > 1200 ml: sigma 2,6 ml Remark:Minimum bottle head space height to be equal to 25mm from bottle top (including bottle tolerance and filling precision). Product wastage, upon each product changeover: max 50 liters (on the filler). - 10 Product changeover required time: (between two compatible products, for which just one sterile water rinse is sufficient): max 30 minutes. Oxygen content in the head space: max. 5% including nitrogen flushing in the bottle before filling and liquid nitrogen droplet before capping. Procomac will make new test in the next 15 days in order to be able to guarantee a lower oxygen content. We’re ready to share with Jafora the results of the test and to agree on a better guarantee. - 11 Capper - 12 Heads Flat, plastic caps 38mm without alu foil Capping Loose caps: max 1:25.000 (single principle thread type caps) - 13 max 1:10.000 (multi-principle thread type caps). Cap application torque guaranteed precision: ± 10%. Slanted caps: max 1:25.000 (single principle thread type caps) - 14 max 1:10.000 (multi principle thread type caps). In any case the guarantee on the capping will not be lower than the guarantee given on the caps by the caps supplier. – 15 Line in production until October 2025