Used Agglomerator

Plast Compactor PC 700/250 for sale Machine manufacter: WIPA Werkzeug&Maschinenbau GmbH Working hours: 9100 Output up to 1.000 kg/h. Materials: PE/PP The machine is equipped with a rotary valve for fine material return, agglomerate cooling and with software integration of the agglomerate cooling into the control cabinet. Grinder, wind sifter and double bigbag station can be sold separately if required. The Plastcompactor has just been repaired, kneading bars and spindle adjustment replaced and everything readjusted, and a test run carried out. The system has not been run since then. The motor of the Dreher regrooving mill was replaced in 2014. CE Certified Machine Manuals available

H.I.Pallmann Agglomerator IPA 400/40 available for sale material that can be processed: PE, PP, LDPE, HDPE, MDPE, Agglomerator motor: 250 kW Fan motor: 18,5 kW Granulator motor: 55 kW Each machine has: - Cyclone - Powder separator - spare Part Package - Cutting mill Zerma 700/1000 - Electrical cabinet No longer in production, but in good working conditions. Machine was dismantled in 2023. Machine is intact with all parts, but dismantled and packed with film on stock.

Less than 1500 hours working hours The WiPa Plast Compactor Type PC is an agglomerator for gentle densification of plastics with low bulk density, for example: • fibres • film • stretch film • foamed materials • powder • fine particles Output capacity depends a lot of type material (see chart) Output of 1600kg/h mentioned in offer is max. for PE Film (350g/l) for instance 1 Plast-Compactor Type PC 700/250 Consisting of: ++Feeding Unit of the Plast-Compactor Type PC 700 : Circular Buffer Tank with 2 level indicators, a service door, two windows and an agitator in the buffer container guarantees permanent filling of the feeding screw and prevents bridging. The Feed Screw is mounted on generously sized rail system. That allows to decouple the Feeding Unit from the Plast-Compactor, for cleaning or maintenance, even with strong contamination. Feed screw driven by a direct drive. The feed screw is divided in 2 pieces consisting of a bearing part and the transportation part. The feeding unit is quickly and easily accessible for cleaning and maintenance. Size / Volume ca. 3 m3 Material normal Steel Drive Agitator 4kW Drive feeding screw 22 kW. ++WiPa Plast-Compactor Type PC 700/250 The WiPA-Plast Compactor of the PC series is used for gentle processing of thermoplastic materials. In a continuous process the material is heated to its specific softening temperature area which is below the corresponding melting point. The result is a high-quality agglomerate with high bulk density, easy to dose, with lowest possible thermal damage. The feeding screw pre-compacts the plastic to be recycled and feeds it to the Plast-Compactor's disc pair. Kneading and rolling between the discs creates friction heat and plasticise, sinters and compresses the material. Housing: heavy welded steel sheet construction. Compactor discs: Disc diameter : 700 mm Material: surface hardened special tool steel Main Drive: V-belt with guard for V-belts Main Motor 1 x P = 250 kW, n = 1000 min-1 ++ Central Discharge System for PC 700 Discharge of the agglomerate out of the Disc Housing of the Plast Compactor * 1 central fan, Power 1 x P =11 KW * capacity ca. 3.300m3/h * Material inlet diam. 200 mm * Material outlet diam. 200 mm ++ Electrical Control / Switch Cabinet Electrical Control of the Plast-Compactor full automatic operation.

Set of 3 Herbold agglomerators (plastcompactor) working together. Working hours : 19651 1/ Plastcompactor HV 70/250 Storage silo (4cbm) with feeding screw Herbold Plastcompactor, type HV 70/250 Conveying system Herbold granulator, type SML 45/100-S4-2 Conveying system and recycling system for fines Material transport system 2/ Plastcompactor HV 70/250 Storage silo (4m3) with feeding screw Herbold Plastcompactor, type HV 70/250 Conveying system Herbold granulator, type SML 60/100-S4-2 Conveying system and recycling system for fines Material transport system 3/Plastcompactor HV 50/110 Storage silo (4m3) with feeding screw Herbold Plastcompactor type HV 50/110 Conveying system 1 Blending silo type SMV 20000 1 Electrical control, PLC

Plastic agglomeration system, type PFV for agglomeration of PET sheets and flakes PET Throughput rate: 500- 700 Kg/h Working diameter of the die: 315 mm Working width: 20 mm Motor hot-melt granulator: 45 Kw Frame device: Drive by spur gear motor, 1.1 Kw Number of beating shafts: 2 Number of beating arms per axle: 3 Output conveying worm Driven by frequency-controlled motor, 3 Kw Output conveying worm speed (min.-max.): 8.5 - 128 rpm Frequency regulation range: 5 - 75 Hz Output worm screw thread pitch: 120 mm Pitch depth: 20 mm Number of stirring blades: 12 Cutting aggregate Motor drive: 5,5 Kw Rotational speed of rotating blades (min.-max.) approx.120-900 min-1 Frequency regulation range: 10- 75 Hz Number of rotating blades: 2 Main motor power: 110 Kw water consumption : 600-900 l/h