Used Extrusion lines for multifilaments

PP and PE split film production line for fishing rope, plastic rope and baler twine Max. speed: 120 m/min Max.output: 75 kg/h The line consists of: Automatic feeding system RMSJ 70 single screw extruder: screw 70 mm; L/D 33:1 Stainless steel cooling water tank Calender Hot oven -heating power: 30 KW Needle roller Stretch unit Waste yarn device Winders: -12 winding heads -cross winding Yarn twisters Berkand Makina - Zeugma YM 530 x 2 - Zeugma YM 650 x1 Semi-automatic packaging machine

The line is supplied complete and tested with metering and feeding granules ; extrusion process controlled by the metering pump , flat head with vertical outlet and double lip scratched , water cooling tank , stretching oven air intake , and collection broken wires ;winding included. All the mechanical components will be replaced and revised at new . Production capacity up to 150 kg/h ; mechanical speed up to 150 mt/min . This configuration is able to produce standard artificial grass in 2000 Den. 1) n. 1 - Dosing unit model: “ DU.300 “ 2) n. 1 - Extrusion model: “ EX.100.32 “ 3) n. 1 - Continous filter model : “ CFU.100 “ 4) n. 1 - Gear volumetric pump model: “ PU.120.40 “ 5) n. 1 - Special head model : “ H.085 “ 6) n. 1 - First cooling tank model: “ HVU.100.150 “ 7) n. 1 - Dryer tank model : “ DU.50.035 “ 8) n. 1 - Slow stretching unit model : “ SSRU.085.0175.05 “ 9) n. 1 - Stretching oven model (New): “ H.400.080. “ 10) n. 1 - Fast stretching roller model : “ FSRU.085.025.07 “ 11) n. 1 - Annealing oven model(New): : “ H.400.080. “ 12) n. 1 - Annealing stretching roller model : “ ASRU.080.0175.05 “ 13) n. 1 - Winder machine model : “ SAHM 260.128 “ The electrical cabinet and all the driver , static components , CPU and HMI touch screen panel are news and leading manufacturers like . Substrate pre-testing: The pre-testing of customer's substrates is essential. All test material will be supplied by customer 20 days before the pre-testing date at its cost. Delivery Term: 90 working days from down payment, final layout and technical specifications acceptance.

In the beginning, the machine produced POY yarn after the modernisation of the winders, it produces a medium-strength yarn of about 4-4.5 g/den. Single screw extruder Screw diameter 75 mm Screw length 28 D Output max. MDY - PP 110 kg/h Actual output depends on yarn specification Screw speed max. 160min-1 Motor rated power 38 kW Drive system AC motor Screw/barrel material nitrided steel alloy/bimetal cylinder Number of heating zones 5 (cylinders) Number of double spinning pumps 4 Performance of the double spin pump 2x6 cm³/U Number of spin packs 8 Cooling unit Horizontal Zones 3 Vertical Zones 4 Number of stretch units 2 Godet diameter 160mm Stretch ratio variably adjustable max. mechanical godet speed in front of the winder 3300 m/min Number of rewinders 2

Description of the Spinning Lines * Material common of the two lines A e B: - Drying system of 400kg/Hour completed with: - Drying Mod T400kg + 15KW – capacity 400kg/ Hour Tem: 175ºc – 380Volts – 50Hz - Desumidifer Munters Model MA 5.000 RBU/MS/FS 0,5 Kw – Resist – 62Kw Nº Fabric 93D50/0346 50Hz – 380V - Condenser – Flow – 3000 m3/H Admission of Water – 15ºc Way out of water – 10ºc - Heat exchanger – Pression of the work – 1000m/m Tempª: 120ºc - Thermal heat resistances with 120Kw-Power - System of Air Filters - Packing and transport automatic system of POY bobins from Electro-jet. - UTA – Treatment Air Unit AEL with 20.000 m3 / Hour for conditioning room Mod: AEL 22.000 MC/H – Pont- 7,5Kw and 18,5 Kw - Generator Perkins – Capacity 700 Kva - Two Polymer Silos (AISI) 1- 60Ton / 1- 75Ton - 1 pulseveyor for transportation of the chips of Pes from the silos to the produce zone - 2 Air compressors of 9 m3/min and 4,5m3/min comingerssol and Atlas Copco - 1 Air dryer – 120L/minute of comingerssol - 1 Deposit for compressed air eith capacity of 2000L - Line of production of desmineralizated water - Line of water pumps for the air condition - 1 calibrator Machine ECME * Line A: - Extruder EOC 105 ( 200Kg / Hour ) Motor: 92Kw / Resistence: 52Kw / Ventilator: 1,65Kw - Manifold for Polymer distribution - Barmag - CPF ( Fluid Dynamics ) on-line filter - Three boilers with 12 end positins (6+6) Orlandi Impianti - Boiler to produce diathermic vapour with 60Kw Boiler: Orlandi Impianti Temp. Progetto: 350ºc Pression: 2,5Bar Capacity: 850 Fabric Nº: 1088-1089 Cod: VSR Pot: 60Kw - Six air cooling individual boxes - Six winding machines Cognesit F9C to produce maximum six bobins / each (maximum weight per bobbin 15kg) with individual regulation. Model: GRC F9C Year: 1994 Weight: 550kg Maximum 5000 RPM Work - One winding machine complet for reserve with the same caractheristics - Six polymer pumps Slack & Parr of 2.4 cc/ rev. - Six finishing oil pumps Slack & Parr de 0.6cc/ ver. * Line B: The same material of Line A but with a dosing Engine plast masterbatch system to produce coloured yarns. Model: DE15 Pot: 0,18Kw Capacity: 30kg/Hour Reduce box : 1/60 * This Lines A and B Produce: PES POY S.D. / RW / Bright / Dope Dyeing POY PES yarn Titles: 105Dtex 24Ply / 36Ply / 48Ply 140Dtex 24Ply / 36Ply / 48Ply / 72Ply / 96Ply 160Dtex 24Ply / 36Ply / 48Ply / 72Ply / 96Ply 284Dtex 24Ply / 36Ply / 48Ply / 72Ply / 96Ply 500Dtex 24Ply / 36Ply / 48Ply / 72Ply / 96Ply There are 1 Line that can produce D. Dyeing colours in the same titles.