Used Extrusion lines for nonwovens

Extruder screw : 130mm Line speed max. : 400mpm Output : 550kg/hr MODEL Screw speed max. : 72rpm Main drive power : 132kW Barrel heating capacity (IR Heaters) : 72kW SCREEN CHANGER CANDLE TYPE Heating load : 9.6kW IN-LINE GEAR PUMP SYSTEM Motor rating : 7.5kW Max. Speed : 77 rpm Heating Load : 5 kW INTEGRATED MELT PRESSURE GAUGE CUM MELT TEMPERATURE SENSOR Measuring Range : 0-400 Bar Temperature Max : 0-400 ºC With melt temperature indicator for max.: 0-400ºC TEMPERATURE CONTROLLED LOCK-OUT DEVICE Protection of Extruder against cold start-up. CONNECTING PARTS BETWEEN EXTRUDER AND SHEET DIE T-DIE SPECIFICATION Slit width : 1500mm Type of lip-Flexible non-exchangeable plain lip Control zones : 5 Heating load : 24.6kW GRAVIMETRIC DOSINGNUNIT 4 STATION AERO DRY WATER QUENCH TANK Aspiration Blower Motor : 5.5kW Take up roller : 5.5kW Air knife : 4 Air Knife motors : 4kW SINGLE STATION SLITTER : 3 EDGE TRIM RECYCLING UNIT WITH MIXER Shredding Mill Motor : 3.7kW Blower Motor : 2.2kW HOLDING UNIT Diameter : 350mm Holding Unit motor rating : 5.5kW Holding Unit max speed : 67 mpm HOT AIR OVEN Length of Heating Channel : 6mtrs Fan Motor - 2 Nos. : 5.5kW Heating Load : 48kW Air Velocity Adjustable MODULAR STRETCHING AND ANNEALING UNIT Diameter : 350mm Four Standard Godets Two Watered cooled rollers. Stretching Unit motor rating : 30kW Annealing Unit motor rating : 22kW Stretching Unit max speed : 425mpm Annealing Unit max speed : 430mpm SYNCHRONIZATION OF GODET SPEEDS WITH MELT PUMP TAPE EXTRACTION DEVICES Blower Motor : 15kW 2 x AIR CONDITIONED FOR DISTRIBUTING PANEL : 2 TON ORIENTATION OF TAPELINE: RIGHT HAND TAPE WINDER MODEL GCW-200-HX/LX Tape width range : 1.7 to 4 mm Denier range : 740-2500 Length of Traverse : 200mm Bobbin core ID : 31mm Bobbin core length : 220mm Maximum bobbin diameter : 160mm Winding speed : 500 mpm Number of bobbin winders : 264 Connected load : 32kW

Nonwoven fabrics made by spun bond process are being used in various applications like disposable diapers, hygiene and healthcare textiles, filtration, automotive industry, civil engineering, packaging, carpet backings. Iis still working and produce polypropylene nonwoven textile (10-100gsm) on rolls for the bedding and furniture industry as well as for agricultural use. The fabric can be both white and coloured. A fully equipped line for production of nonwoven textile Spunbond type YS 2400: The machine was put into exploitation in 2021. Also a rewinding and sealing machine for bonding of up to 5 rolls of 2400mm with total width maximum 12m. (Price to be negotiated apart) Raw material: Polypropylene virgin granules OUTPUT OF THE LINE Throughput: up to 500 Kg/h Useful width: 2400 mm Nonwoven weight: 10 ÷ 100 g/m2 SCOPE OF SUPPLY GRAVIMETRIC DOSING SYSTEM - complete with granules transport to it Composed by the following stations: EXTRUDER MODEL 160/32 L/D ratio 1:32 Motor: 250 kW FLOW SCREEN CHANGER TYPE CPF 2/160 SPINNING BEAM The head is heated by electric resistances with suitable dimensions to obtain homogeneous temperature profile. QUENCHING UNIT MANIPULATOR FOR THE MOVEMENT OF THE SPINPACK QUENCHING AIR GENERATION UNIT DRAW GROUP WEB FORMING UNIT The web forming unit consists of a conveyor belt supported and driven by a battery of rolls. SUCTION SET This suction set creates depression on the surface of the web of nonwoven by means of suction devices with adjustable air flow in order to adjust suction to any type of web thickness. STEEL FRAME. STRUCTURE HYDRAULIC CALENDER AUTOMATIC WINDER together with 2 pcs A-frame (to hoist to mother rolls coming from the winder) Web tension goes from 20 to 200 N/m, or other tensions are possible upon request. TECHNICAL DATA Reel max. Diameter: up to 1000 mm Production speed: up to 400 m/min Threading speed: 10 m/min Drive system: . 1 ac motor on drive drum ELECTRONIC EQUIPMENT FOR GENERAL CONTROL AND SYNCHRONISM PLC SIEMENS SYSTEM TYPE SIMATIC S7/1500 CLEANING OVEN FOR SPIN PACK CLEANING With a cleaning system. ULTRASONIC WASHING TANK Complete washing unit composed by stainless steel basin with ultrasonic generator for the final easier cleaning in warm water of the spinnerets coming from the oven. TRIM RECYCLING EQUIPMENT LIFTING DEVICE For spin packs and spinneret lifting to the spinning frame AUTOMATIC REWINDER Minimum slitting width: 60 mm No. of slitters: 14 Rewinder Finished reel max diameter: 1200 mm Core ID: 3 inch and 6 inch Production speed: 600 m/min Threading speed: 10 m/min

Extruder screw : 110mm Line speed max. : 350mpm Output : 450kg/hr MODEL Screw speed max. : 85rpm Main drive power : 132kW Barrel heating capacity (IR Heaters) : 72kW SCREEN CHANGER CANDLE TYPE Heating load : 9.6kW IN-LINE GEAR PUMP SYSTEM Motor rating : 7.5kW Max. Speed : 61 rpm Heating Load : 5 kW INTEGRATED MELT PRESSURE GAUGE CUM MELT TEMPERATURE SENSOR Measuring Range : 0-400 Bar Temperature Max : 0-400 ºC With melt temperature indicator for max.: 0-400ºC TEMPERATURE CONTROLLED LOCK-OUT DEVICE Protection of Extruder against cold start-up. CONNECTING PARTS BETWEEN EXTRUDER AND SHEET DIE T-DIE SPECIFICATION Slit width : 1500mm Type of lip-Flexible non-exchangeable plain lip Control zones : 5 Heating load : 24.6kW GRAVIMETRIC DOSINGNUNIT 5 STATION PRASAD KOCH TECKNIC WATER QUENCH TANK Aspiration Blower Motor : 5.5kW Take up roller : 5.5kW Air knife : 2 Air Knife motors : 3.7kW SINGLE STATION SLITTER : 3 EDGE TRIM RECYCLING UNIT WITH MIXER Shredding Mill Motor : 2.2kW Blower Motor : 2.2kW HOLDING UNIT Diameter : 350mm Holding Unit motor rating : 5.5kW Holding Unit max speed : 71 mpm HOT AIR OVEN Length of Heating Channel : 6mtrs Fan Motor - 2 Nos. : 5.5kW Heating Load : 48kW Air Velocity Adjustable MODULAR STRETCHING AND ANNEALING UNIT Diameter : 350mm Four Standard Godets Two Watered cooled rollers. Stretching Unit motor rating : 30kW Annealing Unit motor rating : 22kW Stretching Unit max speed : 388mpm Annealing Unit max speed : 366mpm SYNCHRONIZATION OF GODET SPEEDS WITH MELT PUMP TAPE EXTRACTION DEVICES Blower Motor : 9.3kW 2 x AIR CONDITIONED FOR DISTRIBUTING PANEL : 2 TON ORIENTATION OF TAPELINE: RIGHT HAND TAPE WINDER MODEL GCW-200 VERSA Tape width range : 1.7 to 4 mm Denier range : 740-2500 Length of Traverse : 200mm Bobbin core ID : 31mm Bobbin core length : 220mm Maximum bobbin diameter : 160mm Winding speed : 500 mpm Number of bobbin winders : 252 Connected load : 30kW