ATELIER FRANÇOIS - CE 2B
Air Compressors (High Pressure). High pressure AF CE 2B compressor, year 2004 Speed: 650 rpm Capacity: 230 cfm It includes: dryer, airtank and chiller....
2004 | 300034165 | ATELIER FRANÇOIS
Air Compressors (High Pressure). High pressure AF CE 2B compressor, year 2004 Speed: 650 rpm Capacity: 230 cfm It includes: dryer, airtank and chiller....
2004 | 300034165 | ATELIER FRANÇOIS
Air Compressors (High Pressure). AF CE46B - High Pressure Air compressor 3 stages piston compresor Dismantled and available immediately! ...
2003 | 300046446 | ATELIER FRANÇOIS
Air Compressors (High Pressure). High pressure compressor Atlas Copco 40P15 Air Pressure : 40 bars Output capacity : 364 m3/hr Year of manufacture: 2001 Working hours : 60 000 hours Includes: - 6000h Original Atlas Copco kit - Two full valve sets No tank Renovation kit valued arou...
2001 | 300036855 | ATLAS COPCO
Air Compressors (High Pressure). ATLAS COPCO Air Compressor 2008 Type: Oil Free Reciprocating Booster Min/Max Inlet Pressure: 5.5*/ 9.7 bar Maximum Working Pressure: Up to 42 bar Performance NI/s: NI/s 401, Nm3/h 1444 Running Power KW: 90 KW at 415 V, 50 Hz, 3ph Made in Eur...
2008 | 300042089 | ATLAS COPCO
Air Compressors (High Pressure). ATLAS COPCO Air Compressor 2009 Type: Oil Free Reciprocating Booster Min/Max Inlet Pressure: 5.5*/ 9.7 Maximum Working Pressure: Up to 42 bar Performance NI/s: NI/s 627, Nm3/h 2257 Running Power KW: 132 KW at 415 V, 50 Hz, 3ph Made in Europe ...
2009 | 300042090 | ATLAS COPCO
Air Compressors (High Pressure). ATLAS COPCO Air Compressor 2DX2-37-10 from 2015 Type: Oil Free Reciprocating Booster Rated power 27 kW Motor shaft speed 1485 rpm Available immediately! ...
2015 | 300045186 | ATLAS COPCO
Air Compressors (High Pressure). Oil free used compressor for high pressure the system is composed of three machines: - Screw compressor Atlas Copco ZR250 - Piston two stage booster Atlas Copco 40D46 - Dryer Atlas Copco MD 600 Air Flow: 2500 m3/h Maximum Pressure: 42 bars th...
2003 | 300045333 | ATLAS COPCO
Air Compressors (High Pressure). Used compressor for PET bottles the system is composed of: - Screw compressor ZR 250 VSD FF - 10 Bar - 252 KW - Piston Booster compressor ZD 2300 VSD - 40 bar - 145 KW working hours: around 35.000 machine not in use ...
2008 | 300046609 | ATLAS COPCO
Air Compressors (High Pressure). Bellis & Morcom VH9H3N, year 2000 Max speed: 1.040 rpm It includes: dryer, airtank and chiller. It does not include cooling tower....
2000 | 300034163 | BELLIS & MORCOM
Air Compressors (High Pressure). Belliss & Morcom WH28H3N Pressure: 40 bar 300hp compressor Includes: Control/Starter Panel...
2000 | 300046347 | BELLIS & MORCOM
Air Compressors (High Pressure). Ingersoll Rand High Air Compressor Pet Star4-3300 R.P.M: 514 Disch Pr. 594.7 PSI A Includes: - High Air Dryer HIROSS PHP 630 2005 Low/High Side Max.1.9 Mpag / 2.8 Mpag - Air receiver capacity 1.5 cubic meter/unit. 6 Units. ...
2005 | 300043858 | INGERSOLLRAND
Air Compressors (High Pressure). Ingersoll Rand High Air Compressor Pet Star4-3300 R.P.M: 514 Disch Pr. 594.7 PSI A Includes: - High Air Dryer HIROSS PHP 630 2009 Low/High Side Max.1.9 Mpag / 2.8 Mpag - Air receiver capacity 1.5 cubic meter/unit. 6 Units....
2009 | 300043859 | INGERSOLLRAND
Air Compressors (High Pressure). Ingersoll Rand IR AIR COMPRESSOR PET STAR 210-3 - year 2000 Includes: 1)HP-300 Ingersoll Rand DRYER: -Compressed Air Dryer, Desiccant, ISO Class 2, 300 CFM, Dew Point (Deg. F) -40, For Air Comp. HP 75hp, 115 Voltage, 4.0 A Full Load Amps, 60 Hz, 1 P...
2000 | 300044493 | INGERSOLLRAND
Air Compressors (High Pressure). High pression compressor NEA NEUMAN & ESSER Model: 3TEV63 Year of manufacture: 2000 Air pressure: 41 bar Delivery rate: 1200 m³/h Dryer included Machine in perfect condition! Power 272Kw Air...
2000 | 300038635 | NEA
Air Compressors (High Pressure). Compressors Neuman&Esser and Atlas Copco from 1994 and 1995 Max delivery pressure 45 BAR ZR4- 1842 m3/h NEAC- 1000m3/h Installed power 90 KW Available immediately!...
1994 | 300046681 | NEUMAN & ESSER
Air dryer. Air dryer HITEMA model PS10.09 Year 2010 Max pressure Freon side 28 bar Max. pressure air side 12 bar Refrigerant R407C 2,7 kg...
2010 | 300046532 | HITEMA
Beer filling. CIMEC FIller America 6-6-1 Tribloc Rinser / Filler / Crowner Construction year 2018 for glass bottles 330 ml can fill beer and carbonated drinks Bottle working high between 180 / 350 mm Bottle diameter 55 to 90 mm Table high 1050 +/- 50 mm Crown c...
2018 | 300046821 | CIMEC
Beer filling. Complete Brewery - Beer Bottling line Brand: Eurostar (made in Italy) Model: MEC ISO DPS 12/1C Year 2015 production: 2000 bph - Malt preparation: Mill 250 kg/h Pallet with Three tanks made of stainless steel copper coated Mash tun/b...
2015 | 300046633 | EUROSTAR
Beer filling. Complete brewhouse from 2020 Includes: 1) Nerez Blucina Varna 15/10 - brewhouse 10 HL, 2 vessels, Whirlpool 17/11 HL, Hot water tank 20 HL , pumps and mixer 2) 2 x Nerez Blucina Unitanks 20 / 25 H - working pressure up to 3bars, 2 zones cooling 3...
2020 | 300046001 | NEREZ BLUCINA
Beer processing. Clarifier Alfa Laval Brew 701 for beer. Year 2016 Has not been used (0 working hours) Including pump Output: 100.000 L/H Low energy and water consumption. High clarification efficiency (99.9%). Low maintenance. Small size. Low noise level. Low temp...
2016 | 300046376 | ALFA LAVAL
Beer processing. Monoblock burner ELCO type N7-4500 G - EF 3 Construction year 2017 For natural gas E, L, LL Beverage category i2R Burner category EN 676 600 - 4000 kW Supply gas 80-500 mbar CE certified Immediately available! ...
2017 | 300046506 | ELCO
Beer processing. Fermentation equipment from 1991 Direct ammonia cooling 24x1450 hl - total capacity 4x237 hl - total capacity Includes: - Fermentation tanks - Holvrieka - from 1991 - 1450 hl - 2 tanks - Fermentation tanks - Schmidding - from 1996 - 1450 hl - 16 ...
1991 | 300045375 | ELLINGHAUS
Beer processing. MTI stainless steel tubular exchanger 28.5 m2, year 1999 100 stainless steel tubes Ø 30 x length 3000 mm Stainless steel body Ø 565 mm with 2 tappings Ø 60 mm 2 damaged stainless steel caps Overall dimensions: 900 x 800 x 3850 mm Available immedia...
1999 | 300046071 | MTI
Beer processing. Filtration station - SCHENK from 1994, 250 hl/h. Includes: 1 - Kieselguhr feeder - Schenk from 1994 2 - Horizontal kieselguhr filter - 250 hl/h - Schenk from 1994 3 - Wasted kieselguhr tank - 30 hl - Schenk from 1994 4 - PVPP buffer tank - 20 hl...
1994 | 300045031 | SCHENK
Beer processing. Brewhouse, Ziemann & Spomasz Torun from 2000 - 2015 400 hl x 12 brews per day Includes: 1 - Pneumatic transport compressor - Spomax, Mechanical transport system 23.5 m - Zumec 2 - Preliminary sieve cleaner - Spomasz Torun from 2015 3 - Malt silo -...
2000 | 300045030 | ZIEMANN
Blow moulding moulds. Used molds for Sipa SFR 8 with 38mm neck 1. format 0,33 from 2005 2. format 0,50 from 2013 3. format 1,50 from 2013 4. format 1,50 from 2015 5. format 0,40 from 2017 6. format 1,00 from 2008...
2008 | 300039501 | SIPA
Bottle inspector. Bottle Inspector FT System from 2008 Model: CL 500 - HF - CT 001 - SE Inspector is checking level and closure In good condition and available immediately! ...
2008 | 300039157 | FT SYSTEM
Bottle inspector. Empty Bottle Inspector HEUFT from 2007 Capacity: 40.000 bph Idle since: 2020 Dismantled and stored ...
2007 | 300046021 | HEUFT
Bottle inspector. HEUFT Bottle Glass inspector InLine Reflexx Construction year 2014 Used for 1 L white glass milk bottles Suitable for 87 mm diameter bottles Height 259 mm Height of the cylindrical body area min. 20 mm / max. 175 mm Mouth diameter 38 mm 38 mm - ...
2014 | 300046770 | HEUFT
Bottle inspector. Glass bottle inspector for empty bottles Krones Linatronic K 713 Formats: 1L - 0,50 L - 0.75 L - 0.25L Type of inspection: Bottom, Neck, Body (internal and external) , HF: Liquid waste on the bottom, IR: Oil waste and control of the body it canno...
2003 | 300037889 | KRONES
Bottle inspector. Glass bottle inspector for empty bottles Krones Linatronic K 713 Formats: 7 types of them between 0.5 lt to 0.25lt Type of inspection: Bottom, Neck, Body (internal and external) , HF: Liquid waste on the bottom, IR: Oil waste and control of the b...
2001 | 300044984 | KRONES
Bottle inspector. Empty bottle inspector KRONES Linatronic 735 M2 Year of manufacture: 2007 Output: 39,600 bottles per hour Bottle size 0,25l, Longneck 0,33l, 0,5l, Euro 0,5l, 0,75l Gastro Worked hours 17.000 Glideliner, accutable and partly conveyor belts are a...
2007 | 300045866 | KRONES
Bottle inspector. KRONES bottle inspector Type 712 M2 Construction year 2001 Completely overhauled in 2020 Working hours 21611 Worked in only 1 shift / day The Inspector can recognize the 1.0l, 0,5l and 0.2l twist-off glass bottles. Built in are 2X wall controls...
2001 | 300046454 | KRONES
Bottle inspector. Bottle Inspector PONNDORF from 1999 Can inspect residual liquid, HF lye, ground control, bottle neck control For bottles : Diameter 50 to 100 mm Height 150 to 360 mm There are some spare parts vailable Format sets for the following bottles: 1,0...
1999 | 300040863 | PONNDORF
Bottle inspector. Visual bottle inspector SACMI Model: SV10 Year: 2004 Dismantled and stored. Can be shown in dry cycle Available immediately! ...
2004 | 300041865 | SACMI FILLING
Cans filler and capper. Pack'Co PAC510 drum filler on pallet for 1000L containers, year 2014 Suitable for liquid and pasty products Includes: - Stainless steel frame - Dosing rod that allows to fill under the bung, by the bottom and with accompaniment of the liquid - ...
2014 | 300043861 | PACK-CO
Capping machine for glass bottles. Arol capper for glass bottles 1 liter glass bottle type of cap: 31 x 25 Bormioli weight of the machine 1000 kg machine in working condition ...
2004 | 300038567 | AROL
Capping machine for glass bottles. Arol- Ropp capper from 2013 20 heads Set for 28mm TZL cap and it ran 250 aluminum bottle, can run glass Pitch 720mm Available immediately! ...
2013 | 300042368 | AROL
Capping machine for glass bottles. NORTAN capsule applicator, UNICAP 35 from 2000 Suitable for tinfoil, aluminium and thermocapsules for wine bottles Bottle sizes from 0.2 cl to 1 litre The maximum dimension for processing the bottle cap is 35x 90 mm. output t is variably adjusta...
2000 | 300039446 | NORTAN
Complete Can filling lines. Simik can filler and seamer Speed 16.000 cph Volumes 180, 250, 330 and 500ml 40 filling heads 6 seamer heads Suitable for hot juice filling and CSD Includes infeed/outfeed conveyor Available immediately! ...
2009 | 300045181 |
Complete Can filling lines. Complete canning line Products: Beer Production: 33.000 cph 0,33 - 24.000 cph 0,5 Formats: 330/500 standard Packaging: 4x6 Working Hours: 33.000 approx The line includes the following machines: 1. CAN depaletizer : CFT D2 SBAP year 2007...
2007 | 300046786 | CFT
Complete Can filling lines. Complete filling line for cans KHS from 1991 Capacity aprox. 27.000 cph Includes: 1. Depalletizer - KHS - Markant S1 1ASH PL 2. Can rope conveor DW40S 3. Can rinser DW4S 4. Filler - KHS - Delta VVF 40D from 1991, capacity: 28.000 cph (500ml), ...
1991 | 300046565 | KHS
Complete Can filling lines. Complete filling line Krones for beer from 1997 Capacity - 30.000 cph. Can 330, 440, 500 ml. Includes: 1 - Can filler - KRONES, from 1997 2 - Can depalletizer - Transpak from 2006, rinser Trantech Hysek from 1998, flash pasteurizer Arsopi from 2...
1997 | 300045022 | KRONES
Complete Can filling lines. SIDEL CAN FILLING LINE Fills 330ml standard can Year of manufacturing: November 2006 Capacity: 48,000 cph x 330 ml Carbonated drinks Top lid: 202 type 66 filling valves – Pitch: 102,8 mm - anticlockwise Includes: -GEA Water chiller with plate...
2006 | 300046748 | SIDEL
Complete filling line for fountain water (19 L). Complete filling line for still water BARDI Victoria 5G for 19L bottles Year 2010 Capacity 300 b/h The line includes the following machines: - Inlet/outlet conveyor - Washing machine Victoria 5G "Junior" - Processor (PLC) for control of washing-...
2010 | 300043353 | BARDI
Complete filling line for fountain water (19 L). Bardi water filler for 19L bottles Year of manufacture 2011 Output 300 bph Washer / filler Victoria 5G Junior / capper Siemens touch panel In good condition, currently disconnected and available immediately! ...
2011 | 300043488 | BARDI
Complete filling line for fountain water (19 L). Complete filling line for still water BARDI Victoria 5G for 19L bottles/ 5 gallons Year 2012 Capacity 800 b/h Workinh hours 21000h The line includes the following machines: - Automatic Decapper - Washing, disinfection and rinsing machine - Mono...
2012 | 300043704 | BARDI
Complete filling line for fountain water (19 L). CapSnap- 5 gallon 1 head filler WASHER: •Programable Logic Controller Human-upgraded by SnapCap 8 years ago •Manual load (Automatic available for 550+ BPH) •Separate recirculated wash, recirculated rinse, sanitizer and final rinse cycles •3 HP was...
1997 | 300044441 | CAPSNAP
Complete filling line for fountain water (19 L). Capsnap 600 Adapta from 2002 2 head filling valves 600 b/h includes automatic bottle rinser No longer in production but in good condition...
2002 | 300046695 | CAPSNAP
Complete filling line for fountain water (19 L). Complete Envastronic filling line for watercooler fillers from 2006 Bottle type (basic): PET from 10L to 16L volume PET closing type: PP Non screw cap Pallet: Euro-type Line capacity - 480 bottles/h The capacity is calculated on the basis of a 1...
2006 | 300043067 | ENVASTRONIC
Complete filling lines for carbonated drinks. Products: carbonated soft drinks and beer Bottle type (basic): from 0.5 l to 2.5 l volume PET closing type: PP screw-cap Neck PCO 1810 Labels: plastic RollFed Package format: 3x2,4x3 wrapped in heat shrink film Tray: Euro-type Line capacity - ...
2012 | 300043427 | BC
Complete filling lines for carbonated drinks. Complete Berchi Parmatec filling line for CSD from 1998 Bottle type (basic): 0.5;1.5;2 L PET closing type: PP screw-cap, neck 28mm PCO 1881 Labels: precut - hot glue Tray: Euro-type Line capacity: 8.000 bph at 1.5L The line includes: Compressor ...
1998 | 300037545 | BERCHI
Complete filling lines for carbonated drinks. Complete Filling Line for Carbonated Soft Drinks Capacity : 300 bph Format and size bottle : Height : 200,8 ml Diameter : 57 ml Includes: 1. Automatic Uncramble 200 bpm (NEMINC) year 2017. 2. Tranfers CIP to Filling, from 2013. 3...
2014 | 300045549 | CHIEH SONG
Complete filling lines for carbonated drinks. PET bottle filling line from 2004 for CSD Also suitable for still soft drinks, alcoholic drinks Includes the following: - PET blow molding machine Kosme KSB 4L, year 2004 Output: 6.800 bph - 0,5L 6.000 bph - 2L 5200 bp...
2004 | 300045243 | KOSME
Complete filling lines for carbonated drinks. Complete filling line for CSD from ROTUS, ADS, BT Capacity 8000 bph Includes: 1. Automatic PET bottle production machine A-3000 The power plant, a furnace for heating preforms, preform loader Capacity: 2500 BTU / hour Number of places in the ...
2015 | 300041113 | ROTUS
Complete filling lines for carbonated drinks. TFTC 32R/42V/8C - rinsing, filling, and capping machine 32 rinsing, heads, 42 filling heads, and 8 heads for capping with a maximum capacity of 200 bottles per minute Sidel SBO 10- 2009 with chiller, drier, compressor and transformer Includes: ...
2019 | 300046752 | SIDEL, RFC
Complete filling lines for carbonated drinks. Complete PET filling line for CSD and water from 2004 Formats: 0.5L, 1 and 1,5 L Output: 21500 bph at 0,5 L The line includes the following machines: Preform Feederer Tanner Blower SIG Corpoplast Blomax III Cooler to Blower Riedel Speedline 150 M...
2004 | 300045330 | SIG BLOMAX, SIMONAZZI
Complete filling lines for carbonated drinks. SIPA filling line for CSD in PET from 2007 Capacity 7200 bph for 0,5L bottles, 6000 bph for sizes 1,0L , 1,5L, 2,0L Includes: 1. Blower SIPA SFI 4/4 2. Rinser-Filler-Caper 32-48-8 SGE TRI BLOC S317 3. CO2 SGE Saturatore ...
2007 | 300046592 | SIPA
Complete filling lines for carbonated drinks. PET filling line for sparkling drinks STM from 2019 Capacity up to: 9000 bph for 0,5L, 6300 bph for 1,5L Rinser, filler and capper for PET bottles 0,5L, 1L, 1,5L and 2L Includes: 1. Tribloc Arrow Pet 20/40/8 ISO for sparking and still water/dri...
2019 | 300046613 | STM
Complete filling lines for carbonated drinks. PET line for CSD (0,5L/1,0L/2,0L) from 1996 year Actual speed:0.5L –12 000b/h, 1,0L –12 000b/h, 2,0L –10 000b/h Nominal speed:0.5L –18 000b/h, 1,0L –15 000b/h, 2,0L –12 000b/h Blower SIDEL SBO 10/10, 1996, 10500 b/h Blower SIDEL, SBO 10/14, 1996...
1996 | 300037750 | TEKAL
Complete glass filling lines. MONOBLOC packaging group, model SILVER 36/5 ESSE-PK Gravity filler with 36 filling valves Capper with 5 heads for “crown” caps. Maximum production: 10,000 bph., of 0.75 liters Direction of rotation: Clockwise Year of manufacture: 2013 Manufacturer:...
2013 | 300043842 | CIME CAREDDU
Complete glass filling lines. Complete beer filling line for glass bottles KHS Combi REV-H2 40/10 KK from 1998 Capacity 15000 bph Included: 1. Depalletizer BEYER NAH-L-M from 2009 2. Transportater of bottles KHS GTR 3. Bottle washing machine KHS EC 24/105 S11K 01 4. Filling...
1998 | 300041883 | KHS
Complete glass filling lines. Complete filling line for glass bottles KHS Innofil DMG 144 from 2004 The line includes: - Depaletizer KRONES Pressant Universal 1A capacity 72000 bph - Rinser KRONES 563M capacity 60000 bph - Automatic inspector of empty bottles KRONES M2 ...
2004 | 300041887 | KHS
Complete glass filling lines. Complete filling line for glass bottles KHS ROLA H2 36/5KK Year 1998 (the line was stopped in 2010 and is still installed) Capaciry: 8.000 bph Product: CDS, worked with beer Size of bottles: 0,5L Includes: ·Filling and capping block KHS ROLA H...
1998 | 300041576 | KHS
Complete glass filling lines. Complete KHS Glass Filling Line Year 2000 Product: Carbonated Drink with Alcohol. Shelf life: 18 months Includes: - Unpacker: Rubber bag SYSTEM RES & Crane Hitachi 500kg - Washer: KRONES Lavatec KESK Year 2003 - Caustic Soda Equipment: Pump M...
2000 | 300043989 | KHS
Complete glass filling lines. Complete filling line KHS for water/soft drink/beer carbonated from 1994 Capacity - 24.000 bph. Returable bottles 0,33 L and 0,5 L Regular cap and twist-off Includes: 1 - Filler - KHS, Delta Trocic 72/12KK, from 1994 2 - Palletizing and depallet...
1994 | 300045024 | KHS
Complete glass filling lines. Krones Modufil Bottling line from 2012 Unused and not Installed Ready to load 200 BPM 12oz and 22oz change parts. Includes: -MODULJET RInser -MODULFILL HRS FIller -Allen Bradly control panel -Crowner -Checkmat Inspection machine -UNIVERSE...
2012 | 300045993 | KRONES
Complete glass filling lines. Krones filling line for returnable glass bottles Product: beer Includes the following: Krones VK2V 40/10 NK 94 LM Returnable Glass Bottles filler with speed of 55.000 bottles 0,5l/hour Sterile filter CSM 12-300 Heuft Spectrum LX crate inspecto...
1993 | 300046543 | KRONES
Complete glass filling lines. Sidel Simonazzi filling line for returnable glass bottles Product: Soft Drinks Production rates: • 0,33 NRGB —> 35.000 bph • 0,35 NRGB —> 35.000 bph • 0,20 NRGB —> 32.000 bph • 1,00 RGB —> 18.000 bph Includes the following: - Depalletizer Grip...
1995 | 300046628 | SIMONAZZI
Complete glass filling lines. Trasflluid complete glass semi automatic filling line for oil, wine or vinegar from 2014 Line includes: Bottle blower (with air) for 2 bottles at same time (this is for bottles cleaning prior filling) 5 position Filling station with manual position...
2014 | 300041212 | TRASFLUID
Complete Non-carbonated Aseptic Filling Line for drinks. KHS blow molding machine and aseptic monobloc for filling juices from 2005 Sipa SFR 8E Capacity:11.000 bph Neck 38mm Aseptic filling and capping machine Dry cold aseptic filling and capping machine for PET Bottles KHS Asmofill System ACF 24-60-48...
2005 | 300041280 | KHS
Complete Non-carbonated Aseptic Filling Line for drinks. Complete non-carbonated PET filling line from 2001 Product: Ice Tea without pulp viscosity 13 and acidity 4ph - shelf life 12 months Output: 12.000 bph 1,5lt - 22.000 bph 0,5lt - 8.000 bph 2,0lt Bottles: 0,5L , 1,5L and 2L PET Bottle Closures: 2...
2001 | 300039511 | PROCOMAC
Complete Non-carbonated Aseptic Filling Line for drinks. Complete non-carbonated products Aseptic PET filling line from 2015 Product: vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks Output: 2.500 bph 1,5lt Bottles: 0,5L , 1,5L PET Bottle (...
2015 | 300043619 | SCALIGERA
Complete Non-carbonated Filling Line for drinks. FILLING LINE FOR PET BOTTLES 500ML FOR JUICE STM 2014 Capacity 4000 bph Includes: 1.TRIBLOK ARROW PET 9/9/3 NC9 SCRUBBER (9 GRIPPERS) , NEPFILLER (9 POURERS), CAPPER (3 HEADS) – STM 2018 2.1000L BUFFER TANK – STM 2018 3.CIRCULATING TANK 80L– STM...
2014 | 300046093 | STM
Complete Non-carbonated Hot-Fill Line for drinks. KHS Innofill PET DRV hot fill line from 2017 Line includes the following: 1.Blower, KHS - InnoPET BloFill, neck size: 1881, Cavities: 6, Included: moulds, preform feed unit, preform box tipper, chiller 2.AF compressor, model:CE 24 B, pressure:40...
2017 | 300045941 | KHS
Complete Non-carbonated Hot-Fill Line for drinks. Complete Hot-fill line for juices Krones complete line with Tetra Pak process Includes: - Pasteurizer Tetra Therm Aseptic Drink with buffer tank by Tetra Pak - Preform feeder Contifeed - Stretch-blow Moulder CONTIFORM H 08 with moulds - Filler - ...
2012 | 300043840 | KRONES
Complete PET filling line for sparkling water. Used complete filling line for mineral water Products: mineral water and carbonated drinks Bottle type (basic): from 0.5 l to 2.0 l volume PET closing type: 28mm PCO PP screw-cap Labels: paper pre-cut (not from roll) Package format: 3x2, wrapped...
2019 | 300044631 | CORFILL
Complete PET filling line for sparkling water. KHS Innofill ER VF 88 filling line for still and sparkling water, year 1999 Output: 25.000 bph Neck: PCO 1881 Includes: - SBO 18 blower, year 1999 (23.400 bph) - AF CE 68 ASG compressor, year 1999 - Lanfranchi L3 SR 21 unscrambler, year 1999 - Geb...
1999 | 300046331 | KHS
Complete PET filling line for sparkling water. Products: mineral water and carbonated drinks Bottle type (basic): from 0.5 l to 2.5 l volume PET closing type: PP screw-cap format 29/25 short + 29/25 Sport Labels: paper (not from roll) Package format: 3x2, wrapped in heat shrink film Tray: E...
2010 | 300045591 | KOSME
Complete PET filling line for sparkling water. Products: mineral water and carbonated drinks Bottle type (basic): from 0.5 l to 2.0 l volume PET closing type: PP screw-cap Labels: paper (not from roll) Package format: 3x2, wrapped in heat shrink film Tray: Euro-type Line capacity - 7500 bo...
2007 | 300033642 | METALNOVA
Complete PET filling line for sparkling water. Complete pet filling line for sparkling/still water Includes: Triblock RIVIBLOCK 50/60/12 system (rinser, filler and capper), with automatic cap feeder Year: 2001 Hopper capacity 10.000-13.000 caps Neck 1881, low thread and sport cap Rinser 50, ...
2001 | 300044206 | RIVI
Complete PET filling line for sparkling water. Used Complete filling line for sparkling water with capacity 6000bph, from 2007 Includes: 1. Compressor 40 bar /Ateliers Francois CE46XSG - Hankison compressed air dryer - EVAPCO Europe 4.5x6-6R/41T-50/50 compressor cooler 2. Foaming agent P...
2007 | 300046020 | SGE
Complete PET filling line for still water. Complete pet filling line for still water Includes: -1Blow 4 cavity blow molder-2016 with 2 sets of molds -Tech-long air conveyor 2019 -Bevco bottle rinser -Fogg still gravity Filler -2017. 42 valve gravity filler with a 14 head capper -SOCAL Pa...
2017 | 300045814 | 1BLOW, FOGG FILLER, TECH-LONG INC.
Complete PET filling line for still water. Bosch PET Bottling line for water Machine design Line Speed: 16,000 Bottle /Hour (8000bph+8000bph) -2 x Combi machines (Blower, Filler & Sealer) -Machine speed: 8000 BPH each -Preform (For 200ml, 150ml & 100ml): Flat Neck 6.39gm -Sealing Thermosea...
2018 | 300046517 | BOSCH
Complete PET filling line for still water. PET water filling line GYM from 2004 Bottle type (basic): 5 liters bottles PET closing type: HDPE 38 standard screw cap Pallet: Euro-type Line capacity - 6000 bottles/h The capacity is calculated on the basis of a 5lt PET bottle The line includ...
2004 | 300043066 | GYM INTERNATIONAL
Complete PET filling line for still water. Complete filling line for still water for 5L PET bottles Line includes the following: - Blower Sidel SBO 1 from 1998. Moulds included for 5L, 38mm neck - Preform feeder - Filler Kosme Graviblock 10/1200, 10 filling valves. Year 2010 - Capper Arol,...
2010 | 300043207 | KOSME
Complete PET filling line for still water. Products: Still water Bottle type (basic): from 0.5 l to 2.0 l volume PET closing type: HDPE flat screw-cap 30/25 & sports cap Labels: Plastic BOPP RollFed Package format: 3x2 & 4x3, wrapped in heat shrink film Tray: no tray Line capacity - 35.00...
2005 | 300044168 | KRONES
Complete PET filling line for still water. COMPLETE PET STILL FILLING LINE KRONES FILLER VOLUMATIC and CAPPER - 2008 CONTIFORM S24 BLOW MOULDER -2008 CANAMATIC LABELER CHECKMAT CHECKMAT (LABELER) DOUGLAS CASE PACKER LANFRANCHI Bottle Unscrambler Videojet Bottle Coder Ozone Generator PAI...
2007 | 300046676 | KRONES
Complete PET filling line for still water. Complete PET still water filling line KRONES C320 BLOW MOLDER 2013 LINKER FILLER 60-72-20 from 2011 Inludes: -Airveyor 101 -Case Coder -Inspet -Ink Jet New -Krones Canmatic labeler -Ozone -Pai Palletizer -Posimat -Preform Dumper Preform Orientator...
2013 | 300046707 | KRONES, LINKER
Complete PET filling line for still water. Complete filling line for 5L PET bottles Metalnova SCS, year 2004 Includes: Siapi EAM 20 250/2 blower, year 2004 Metalnova Baseless SCS 12/4 gravity filler, year 2004 Arol capper, year 2004 PE Labellers Pratica 9T-825-18-1E labeller, year 2004 I...
2004 | 300046046 | METALNOVA
Complete PET filling line for still water. Product: Still water Output: bph max.; 4800 bph for 0,5L format and 3600 bph for format 1,5L and 2L Bottles / Molds: 0,5L , 1,5L and 2L Closures: PCO 28mm Labels: Packing: None Palletizing: None The line Sidel / Parmatec consist of the followin...
2000 | 300033251 | PARMATEC, SIDEL
Complete PET filling line for still water. Complete Siapi PET filling line from 2005 Products: still water Production capacity of about 700 bph of 5.0 L and 450 bph of 10.0 L Filler working hours 500, produced only 10.000 bottles Blower for 5L bottles, 800bph and 10L bottles, 800bph mou...
2005 | 300045136 | SIAPI
Complete PET filling line for still water. Sidel PET line for still water Year: 2006 Format: 0.5L Includes: SBO14 blow molder Sidel Combi filler Chiller Sidel labeller AF compressor Shrink wrapper Available immediately! ...
2006 | 300046134 | SIDEL
Complete PET filling line for still water. STM Arrow Pet 16/16/6 NC/BIG 6 litre mineral water bottling line, year 2015 Output: 3000 bph Includes: Blueline 3 BIG blower, year 2015 Tribloc washer-filler-capper STM Arrow Pet 16/16/6 NC/BIG, year 2015 UNO ADE labeller, year 2016 ERSEY handl...
2015 | 300045453 | STM
Compression moulding moulds. Kits for CCM48 mould 50 pieces cavity Cap specification: S4 A28 1810, 2.85grm. +-0.15 All parts original Sacmi ...
2006 | 300045446 | SACMI
Compression moulding moulds. SACMI mold set 28 mm CSD 12 Year 2014 HDPE neck 28 mm carbonated soft drinks Mold very rarely used and assessment done by SACMI Immediately available...
2014 | 300046772 | SACMI
Compression moulding moulds. SACMI mold set 30 mm x 25 mm Year 2013 HDPE neck 30 x 25 mm Hardly used Immediately available...
2013 | 300046776 | SACMI
Conveyor. Erimec TRC50A conveyor, year 2018 Speed: 15 meters/minute 3 m length motorized with motor : 3 pieces 3 m length motorized without motor : 3 pieces 3 m free length : 3 pieces 1 m free length : 1 piece 2 m motorized length with motor : 1 piece 2 m fre...
2018 | 300045912 | ERIMEC
Conveyor. Conveyors Krones Synco for cans, glass or PET bottles (50m), year 2015 Never been used Available immediately ...
2015 | 300046357 | KRONES
Conveyor. Bottle take out device for a Nissei ASB 12M The conveyor has only a few thousand of hours Made in Japan Production: 400 bph Driving Method: Vertical Movement, Electrical Slider, Forward Backward Movement:Air Cylinder The machine has been dismantlle...
2021 | 300044015 | NISSEI ASB
Conveyor. 50 meters of Perfect condition AIR conveyor by Sidel / Simonazzi from 2006...
2006 | 300039158 | SIDEL
Depalletizer for glass bottles. KHS Innopal AS1H depalletizer, year 2005 Output: 25.000 to 30.000 bph Available formats Bottle height (mm) Bottle diameter (mm) Layers (#) Total pallet height (mm) DONA 1 Litre 268,5 87,9 ...
2006 | 300046083 | KHS
Edible oil filling lines. Complete Enoberg oil filling line, year 2009 Output: 1850 bph. Includes: 1. SMF Combi 200 automatic blower, 2 cavity molds, year 2009 With Kaeser booster, dryer, filter and 40 bar air tank (and without preform elevator) 2. Tech Max bottle erec...
2009 | 300043795 | ENOBERG
Edible oil filling lines. Used complete filling line for edible oil Bottle type (basic): 1.0 l volume PET closing type: 29/21 snap on Labels: paper pre-cut (not from roll) Package format: 6x2, wrapped in heat shrink film or carton box Tray: Euro-type Line capacity - 6000...
1995 | 300045971 | KOSME
Edible oil filling lines. Used PET oil filling line from 1995 Output: 8000 bph Volume: 1L Includes: 1) Filling machine Masterfil S1000-A 4HD ON 6HD S/V RWF from 1995 2) Labelling machine ANKER, type: Variant 1 from 1995 3) Empty bottle feeder Mantika from 2009 4) Market ...
1995 | 300045293 | MASTERFIL LIMITED
Edible oil filling lines. Complete filling line for edible oil Prospomasz from 2003-2018 Capacity 3000 bph Includes: 1. Filling and capping machine Mono-30 from 2003 Fill and cap bottles from 200 to 1000 ml. Filling valves 8, capping heads 4 Sizes of the bottle: diameter 50...
2003 | 300046307 | PROSPOMASZ
Glass bottles filler for W&SD. FILLING AND CAPPING MACHINE FOR GLASS BOTTLES 330ML BIENKOWSKI FROM 2018 Capacity 2000 bph 1.FILLER MACHINE NBP-12 2.ZAP-1 1-HEAD CAPPER 3.CAP FEEDER It was used for juices. Available immediately!...
2018 | 300046094 | BIENKOWSKI
Glass bottles filler for W&SD. Filler CFT MASTER RS 40/40/10 from 2010 Universal, can fill glass and PET bottles Was filling still and carbonated water Capacity 18000 bph for 0,33 L and 14000 for 0,7 L Available immediately!...
2010 | 300044603 | CFT
Glass bottles filler for W&SD. Used Monobloc for glass bottles Brand: Cimec (Made in Itay) MODEL: AM S 8/1 VA monobloc made up of isobaric filler for glass bottles and single-head capper for 28x15mm aluminum screw cap. This machine can be used to fill carbonated and non-carbon...
2016 | 300046365 | CIMEC
Glass bottles filler for W&SD. Irundin Sincronbloc 20-4 filler for still water in glass bottles, year 2005 Arol Euro VA capper (automatic rotating turret), year 2005 Capacity: 6000 bph Old rinser can be provided with the filler, but it needs some refurbishment to be fully oper...
2005 | 300044706 | IRUNDIN
Glass bottles filler for W&SD. KOSME monoblock rinser/filler for 300ml to 750ml glass from 2008 4500 bottles per hour @ 750ml 40 valves Includes: AROL capper 6 heads (Quick-connect) (year 2010) Filling sparkling water Missing parts: Documentation (electrical, user manual) Dumm...
2008 | 300041702 | KOSME
Glass bottles filler for W&SD. Krones counterpressure filler long pipe Construction year 1980 Products: wine, frizzante and sparkling wine Formats : 0,25lt, 0,375lt, 0,75lt, 1lt, 2lt Formats Capacity : approx. 5,500-6,000 / 0.75lt bottles per hour Wine, Frizzante and sparkling...
1980 | 300042199 | KRONES
Glass bottles filler for W&SD. Used monobloc for glass bottles Brand: Krones Model: Mecafill 40-50-10 Formats: 250ml and 275ml (it can fill PET bottles of 2.5lt) Cap: Metal screw caps electrical, 380-400v, 50/60hz PLC: Siemens Machine in working condition ...
2003 | 300045678 | KRONES
Glass bottles filler for W&SD. Filling line SUNSWEL BXGF-14-12 For water in glass bottles Year: 2014 12 filling valves 6 capping heads Bottle 250 ml (6.000 u/h) Bottle 750 ml (2500 u/h) Capper of 6 heads Cap type: ROPP / 28 mm Disconnected Can be inspected inmediately ...
2014 | 300045386 | SUNSWELL
Glass bottles filler for W&SD. Sympak- Master RS 32/8 -2005 Isobaric valve Was filling 300/m beer but comes with another larger format Includes: sealer,cap loader, capper, crimp cap, rinser, carbonator In excellent conditon and stored in dry conditions...
2005 | 300044118 | SYMPAK
Handle applicator. Twinpack Mete Mec handle applicator from 2004 Twin lane various packs Was running 1.5L 6 pack Capacity 50 packs/minute Dismantled, in good condition and available immediately!...
2004 | 300044650 | TWINPACK
Handle applicator. Handle applicator Twin-Pack UNICLIP for plastic bottles Construction year 2005 Master" handle elevator and "Twin Pack mod. UNICLIP 2000/L" handle applicator with relative handle descent slide and sorter Machine dismantled but in very good condit...
2005 | 300046631 | TWINPACK
Heating and cooling unit for moulds and dies. Accuchiller Water-Cooled Portable Chiller Model - NQW08 Nominal Cooling Capacity - 8 ton at 50°F LWT Voltage - 460/3/60Hz Tank/Pump Options - Tank & Pump Included Pump Size - 1.5 HP Pump Rotary Non-Fused Disconnect Switch - Rotary Non-Fused Disconne...
2019 | 300046576 | THERMAL CARE
Injection moulding machine for covers. 300 Ton Husky Injection Molding Machine Manufacturer: HUSKY Model: G300 GEN RS85/70 Year:1999 Screw stroke: 340mm Screw L/D ratio: 24.7:1 Max Injection Pressure: 29,100 PSI Injection Capacity: 1308 cm3 Tonnage: 300 Tie bar spacing: 720mm X 720mm Cl...
1999 | 300043326 | HUSKY
Injection moulding machine for food and beverages caps. Complete plant for spirits (vodka, brandy, wiskey) closures from year 2012 The plant inlcudes: - Assembly unit GEFIT for closures, 10.000 caps/hour - Printing units: DELSA, MADAG, MOSS - IMM Negri Bossi CANBIO 330 - 2 units and CANBIO 220 – 1 u...
2012 | 300040906 | GEFIT
Injection moulding machine for food and beverages caps. Husky H300 RS80/70 injection moukding machine for caps & closures Includes Piovan RPA800 Dehumidifier Working hours: 67.900 h In good condition and available immediately! ...
2008 | 300039841 | HUSKY
Injection moulding machine for food and beverages caps. Husky H225 RS55/50 injection molding machine from 2002 Running hours: 155.000 It was used for production of caps and closures Machine in working condition ...
2002 | 300045998 | HUSKY
Injection moulding machine for food and beverages caps. Used Netstal SynErgy 3500-3700 E from 2007 Clamping force 3500 kN Screw diameter 80 mm Plate dimensions 1050x1150 Clearance between columns 720x720 Mould hight 600-950 Opening stroke 0-700 Motor power 90 kW Heating power 53,5 kW Dimensions 9,65x2,33...
2007 | 300044202 | NETSTAL
Injection moulding machine for PET preforms. Complete HUSKY injection moulding system for preforms from 2010 Model: HyPET300 P100/110 E100, 72 cavities Working hours : 65.000 hours The line includes the following ancilliaries and equipment: - Robot - Resin hopper Plastic System - Resin dry...
2010 | 300045107 | HUSKY
Injection moulding machine for PET preforms. Injection molding system HUSKY HyPET 300PET P100/120 E140 for PET preforms . Includes: Dry Pack cabinet with integrated climate control of mold area EISBAR, from 2007, Power:147 kW Dry Pack Hopper EISBAR model:H5.5 from 2007 Blower KAESER model:BB...
2004 | 300045466 | HUSKY
Injection moulding machine for PET preforms. Husky GL 300 P100/110 E 100 for PET preforms from 2003 Includes hopper, dryer, mould dehumidifier and mezzanine Running Hours: 95296 Chiller and mold not included Last audit January 2018 by HUSKY Auxiliaries: Handling / Robot Model FSI 200 GL...
2003 | 300041429 | HUSKY
Injection moulding machine for PET preforms. Complete injection molding system for production of PET preforms HUSKY GL300PET P100/110 E120, Constructon year 2003 Injection Unit: P100/110 E120, Clamping Unit: GL300PET, Dryer:Plastic System DR220HT Mold Dehumidifier Plastic System DSH1800 ...
2003 | 300045929 | HUSKY
Injection moulding machine for PET preforms. HUSKY Injection Molding Machine for Preforms MODEL INDQ90PET RS 80/80 16 cavities Auxiliaries included: - Desiccant Hopper - Desiccant Dryer - Mold Dehumidifier Molds Included: - Hot Runner 16 Cavities - Cold Half PCO 1810 - 17 gram Preforms -...
2002 | 300046380 | HUSKY
Injection moulding machine for PET preforms. Husky Hypet 90 RS65/65 for PET preforms from 2010 Includes: Hopper Not currently in production, available immediately and in excellent good condition!...
2010 | 300046640 | HUSKY
Injection moulding machine for PET preforms. Used Injection Machine for PET Preforms HUSKY 500 P155/150 E155, year 2007 Working hours 99492 (March 2024) The system includes the following: Mould: Complete 144 Cavity 52.0g/28mm PCO 1810 Preform Mould (HR + Cold-Half) Cavity Plate Model: 1...
2007 | 300046729 | HUSKY
Injection moulding machine for PET preforms. Complete system for preforms Krauss Maffei 320-3500 CV PET from 2013 Includes: - PET Injection system Krauss Maffei 320-3500 CV PET from 2013 - 96 cavity injection mould Otto Hofstetter AG model PP513 - Neck 29/25 weight 10,5 gr - Dryer Piovan DP...
2013 | 300046552 | KRAUSS MAFFEI
Injection moulding machine for PET preforms. Complete system for preforms Netstal PET-LINE 60N/95 from 2012 Includes: - PET Injection system Netstal PET 2000-3700 R - 60 cavity injection mould Otto Hofstetter AG (27 gr and 30,5 gr) - Dryer Piovan 560 kg/h - Air dehumidifier RPA 1200, 1200 m3...
2012 | 300044958 | NETSTAL
Injection moulding machine for PET preforms. Complete system for preforms Netstal PET-LINE 2000-3700R from 2011 Includes: - PET Injection system Netstal PET 2000-3700 R - 60 cavity injection mould Otto Hofstetter AG (30 gr, 34.5 gr and 39 gr) - Dryer Piovan 560 kg/h - Air dehumidifier RPA 12...
2011 | 300046230 | NETSTAL
Injection moulding machine for PET preforms. Used Injection Machine for PET Preforms NIIGON (made in Canada) APET 150 P85 E85 Construction year 2019 The system include the follow auxiliaries: Resin Dryier Piovan GMP100 Construction year 2019 Dem¡umidifier Piovan RPA1800 Control unit for th...
2019 | 300046677 | NIIGON
Injection moulding machine for PET preforms. Injection Molding Machine Nissei PM170/111M YOM 2012, 32 cavities Included 2 molds - 14,6 g neck38 mm and 35,5 g neck 28mm PCO Auxiliary equipment compressor, chiller, cabinet It was working only 4 years. Disconnected ...
2012 | 300040831 | NISSEI ASB
Injection moulding machine for PET preforms. The system includes: - Sacmi IPS 220 injection moulding machine - One complete mould of 72 cavity 1881 PCO 32,5 gr - Resin Dryer, Genesys - Mould Dryer, Piovan - Hopper, Piovan - HTC and LTC Chiller, Industrial Frigo Cyle time for 15 seconds for 32...
2017 | 300043674 | SACMI
Injection moulding machine for PET preforms. Used injection molding machine for preforms Brand: Sacmi Made by Oima in Italy Model: Stratos SL 3300 180 Year: 2009 Dryer: Plastic Systems D808 HT Hopper: Plastic Systems H2000 Mold Dehumidifier Plastic Systems DL 2400 Mezzanine Molds available...
2009 | 300045728 | SACMI
Injection moulding machine for PET preforms. SIPA PPS-96 complete system Includes: - Injection machine for preforms - Dryer - Dehumidifier Eisbar - Transformer Around 45.000 working hours Moulds available for: 72 cavities, neck 38 2 start, 38mm SP400, 1881 Disconnected. Cannot be seen in ...
2009 | 300044452 | SIPA
Injection moulding machine for PET preforms. SIPA PPS 48/2000 injection molding system for preforms, year 2000 Hours worked: 17.000 Includes: - Sipa 48-cavity PPS48/2000 injection molding machine for preforms, year 2000 - Ceccato Aria CBS 15 G3 compressor, 15/10 bar, year 2013 - Worthing...
2000 | 300046077 | SIPA
Injection stretch blow moulding machines for PET bottles. Aoki SBIII-250LL-50S from 2003 The # cavities depends on the container body dimensions and fluid capacity. The number of cavities range from 10 cavities down to 1 cavity depending on these parameters. Screw diameter- 54mm Injection capacity- 386 cm...
2003 | 300046097 | AOKI
Injection stretch blow moulding machines for PET bottles. Aoki SBIII-250-50 - 2001 The # cavities depends on the container body dimensions and fluid capacity. The number of cavities range from 10 cavities down to 1 cavity depending on these parameters. This information is available via Aoki technical spe...
2001 | 300046107 | AOKI
Injection stretch blow moulding machines for PET bottles. Injectin stretch PET blow molder Automa NSB 20 Year: 2000 Working hours 40.000 approx Cavities 4 Preform 43g with neck 28mm Volume 1lt Pitch 110mm Hopper Moretto DP 304 HC Dehumifier Moretto Mold Chiller: Frigel RC 6...
2000 | 300037880 | AUTOMA
Injection stretch blow moulding machines for PET bottles. Nissei ASB PF4-1B Only 3.900 running hours Auxiliaries included: Piovan DSB 520HE Dehumidifying resin dryer and hopper Moulds included for 5L square and round shape, with container handle, 90 grams In production and available inmediatly...
1999 | 300042603 | NISSEI ASB
Injection stretch blow moulding machines for PET bottles. Nissei ASB 150 DPW injection stretch blow moulding machine The system included: - Nissei ASB 150 DPW - One complete Japan ASB mould of 14 cavity for jar 70 mm neck, 30 gr weight plus 1 extra blow mould for different design - One jar cap mould hot run...
2017 | 300043680 | NISSEI ASB
Injection stretch blow moulding machines for PET bottles. Used injection moulding machine for PET bottles Nissei ASB 70 DPH V3 Year: 2004 Working hours: 24.300 Dust extraction: Dega Chiller: MTA Air Booster: Blitz machine in working condition ...
2004 | 300044870 | NISSEI ASB
Injection stretch blow moulding machines for PET bottles. Nissei ASB 70 DPW injection stretch blow moulding machine The system included: - Nissei ASB 70 DPW - Conveyor - Resin Dryer, - Hopper working hours: 170.000 approx. The machine has been stopped in April 2023 ...
2002 | 300045431 | NISSEI ASB
Injection stretch blow moulding machines for PET bottles. Nissei ASB 70 DPW injection stretch blow moulding machine The system included: - Nissei ASB 70 DPW - Conveyor - Resin Dryer, Fenco - Hopper working hours 87.000 approx The machine has been stopped in April 2023 ...
2008 | 300045426 | NISSEI ASB
Injection stretch blow moulding machines for PET bottles. used Nissei ASB 650 NH it includes hopper and dryer The machine was producing jars The machine has been completely refurbished in 2014 The machine has been disconnected recently...
1985 | 300045723 | NISSEI ASB
Injection stretch blow moulding machines for PET bottles. Nissei ASB 150 DPW injection stretch blow moulding machine The system included: - Nissei ASB 150 DPW - One complete Japan ASB mould of 20 cavity for jar 52 mm neck, 18 gr weight plus 3 extra blow moulds for different design - One jar cap mould of 28 ...
2018 | 300043679 | NISSEI ASB
Injection stretch blow moulding machines for PET bottles. Used Nissei ASB PF8-4B V3 Injection Stretch Blow moulding machine NO Molds available Dryer and plastic dehumidifier included Working hours: 86.500 approx Machine has been stopped in April 2023 ...
2006 | 300045429 | NISSEI ASB
Injection stretch blow moulding machines for PET bottles. Machine in excellent conditions Hours in production: 67.568 It has been maintened by Nissei a few months ago Availabe Palletizer Hergoplas in production at extra price ...
2010 | 300043774 | NISSEI ASB
Injection stretch blow moulding machines for PET bottles. Machine in excellent conditions but requires investment of 15.000€ by NISSEI It has been maintened by Nissei a few months ago Hours in production: 24.096 Included Palletizer Hergoplas in production...
2010 | 300043788 | NISSEI ASB
Injection stretch blow moulding machines for PET bottles. NISSEI ABS 70DPW Year 2006 Working hours 18.000 approx Auxliaries - Dryer Piovan - Dehumidifier Piovan - Pump - Hopper - Metal Mezanine Machine in working conditions till the 19th of January 2024, now in dry cycle ...
2006 | 300040564 | NISSEI ASB
Injection stretch blow moulding machines for PET bottles. Injection stretch blow moulding machine Nissei ASB PF 24-8 from 2016 Capacity 2300 bph 2L Includes: 1) Dryrier New Omap from 2017 Type: Dehumidifier MDSHT + Hopper for raw material 1000 2) Mould for PET bottle 2L Technical documentation for a...
2016 | 300046144 | NISSEI ASB
Labelling machine for glass bottles. Used Self Adhesive labeller for glass bottles Minimum production 800 Maximum production 2000 Machine mostly new, it never been used One machine with 2 heads label the body/retro and another machine with 1 heads labels the neck as Taxometer Machin...
2022 | 300046491 | CIMEC
Labelling machine for glass bottles. Labelling machine for glass bottles COMEN SR/2 from 2003 Capacity 3000 b/h Size of bottles 0,5L For front, back and neck label Hot and cold glue. Machine is in good condition, can be inspected in dry cycle and available immediately! ...
2003 | 300041556 | COMEN
Labelling machine for glass bottles. Automatic rotary self-adhesive labelling machine for glass bottles Brand: Framax (made in Italy) Model: RLA-H06-S2-L2-D480 with 6 heads and 2 labelling stations for application of 2 self adhesive labels Output: 3000/4000 cph on a ciclindrical bott...
2014 | 300043197 | FRAMAX
Labelling machine for glass bottles. Labelling machine GERNEP for self-adhesive labels Type: Labetta 8-480/2 SK Year of manufacture: 2009 Number of stations 1 dispensing units and 8 plates For glass bottles Size of bottle 0,2 to 0, 75 l wrap around for self adhesive labels with a gap...
2009 | 300044636 | GERNEP
Labelling machine for glass bottles. Used labeller for glass bottles Brand: KHS Model: Innoket Production: 3.500 - 22.000 b/h Year: 2005 Dimension of the label: 200ml glass bottles > 54,7x148 mm 1000ml glass bottles > 88x277 mm Machine in wor...
2005 | 300044992 | KHS
Labelling machine for glass bottles. Kosme labelling machine for glass bottles from 1995 5 different equipments for bottles for 3 labels and tax label Machine dismantled ...
1995 | 300034077 | KOSME
Labelling machine for glass bottles. Glue Labeller KOSME Construction year 1990 Formats: 0,25 lt, 0,75lt, 1 lt, 2 lt Capacity : aprox. 5000 bottles per hour Front and back side label ...
1990 | 300042202 | KOSME
Labelling machine for glass bottles. Used labeller for self-adhesive laber for glass bottles Brand: KOSME Year 2006 Clockwise rotary 4 plates 2 Head with auto-adhesive label 7 bottle formats Manuals Machine stored in the warehouse and available immediately! ...
2006 | 300046418 | KOSME
Labelling machine for glass bottles. Labeller for glass beer bottles Krones Robusta 600-10, completely refurbished by the manufacturer in 2016 Three stations labeller Front 75 x 85 Back 65 x 75 Neck 100 x 31 The machine has only 100 working hour after the refurbishment Maximum s...
1995 | 300043442 | KRONES
Labelling machine for glass bottles. Krones - Starmatic labeller from 2018 For glass bottles 14850 bottles per hour 300ml-1l bottles In excellent condition and available immediately! ...
2018 | 300045965 | KRONES
Labelling machine for glass bottles. Used Sacmi labeller Model: RMF/RA 1320 15T Type: S2 E2+S3 E3 ADH+CE+CM Year: 2006 Heads: 15 Electronic camara and optical centering . Speed: 12.000 bph 3 Self Adhesive stations 2 Cold Glue, precut label Glass bottle only Formats: 375 ml to 1500 ...
2006 | 300046417 | SACMI
Mixer. Used mixer for soft drinks - Brand: KHS - Model: Paramix - production: 20.000 l/h - Volume: 8g CO2/l - Presion: 5 bar - Temperature: 20 degrees Machine installed but not in running condition ...
1999 | 300046053 | KHS
Mixer. Saturator brand SARCMI mod. DS 300 year of construction 1989 Technical characteristics: Power supply Volts 380 Hz 50 auxiliary circuits volts 24 Installed power Kw 13.5 H2O pressure at deaerator bar 3 Shaving pressure max bar 6 CO2 supply ...
1989 | 300041703 | SARCMI
Mixer. Mixer - Saturator Sidel Starblend with 25 000 lph from 2006 Capacity: 27 m3. Working ours: 15.800 h Stored in warehouse and available immediately!...
2006 | 300039156 | SIDEL
Mixer. Co2 generation plant Supplier : UNION CONSTRUCTION (Denmark) Model : CBU 0285 Year of Manufacture : 1995 Capacity : 285 Kg/Hr - Effeciency 70% Currently installed and ready for dismantling The current space with the boiler and liquefaction ...
1995 | 300041185 | UNION
Monobloc rinser filler capper. Used Monobloc for still water Brand: SMI Enoberg (made in Italy) Model: EVF 24/24/6 NS - 24 valves of Volumetric filling for still water only (rinser 24 valves) Capper: Arol 6 heads Neck: 29/25 Pitch 150,72 mm Capacity: - format 0.5lt: diameter ...
2018 | 300044906 | ENOBERG
Monobloc rinser filler capper. Melegari Isojet 35-35-7 CSD filling machine for PET bottles, year 2016 PCO 1810 cap Isobaric filler, with CO2 content: 8.4 g/l Filling temperature: less than 10ºC. Hours worked: 3350 (July 2023) Included: - spare parts - conveyor (1m) Available...
2016 | 300041557 | MELEGARI
Monobloc rinser filler capper. PET Triblock Simonazzi Eurostar from 2006 Machine Type: Eurostar 50/70/10K Capacity : 19 000 bph for 1500ml Product: Carbonated water Neck: 1810 PCO Cotrol Panel : Siemens S 7 (CPU); B&R (HMI) Working Hours: 15774 Spare Format ...
2006 | 300039106 | SIMONAZZI
Moulds for Closures. Corvaglia cold half for closures Manufactured 06/2002 Material = lPE Product = Closures 30/25H Product Mass = 2,10g Cycle Time = 4,8 sec Cavities = 48 Working on Husky H225 Available immediately ...
2002 | 300035299 | CORVAGLIA
Moulds for Closures. Complete Corvaglia mold Neck 30/25 Weight 1,8g Cavities: 72 Mold was working in a Husky H300 Mold has 25 milions cycles Stored inside a box with anticorrosive oil Available immediately ...
2008 | 300039302 | CORVAGLIA
Moulds for Closures. Used complete mould for caps and closures Brand: home made by the seller in Europe Weight: 2,5 gr Neck: 38 mm for Milk and Juices (old Tetratop packaging) Cavities: 12 cav. number of shots: 938,328 the mould can be be tested Available immediatel...
2007 | 300045226 | HOME MADE
Moulds for Closures. Husky Hot runner from 2008 Rouxel watercap cold half with the slitting machine Taiwan hwa long with the thermocontroller PMS Mold Master Mold is working condition Neck 30/25 2gr 16 cavities Mold runs at 6,5 sec Dimensions of the mold: 885 x 380 x 5...
2008 | 300039326 | HUSKY
Moulds for Closures. Used cold Half for caps and closures Brand: Husky Weight: 1.75 gr Neck: 30/25 for still water Cavities: 48 cav. number of shots: 239.816 HotRunner not available ...
2016 | 300044651 | HUSKY
Moulds for Closures. Husky mold for closures PCO 1881 from 2007 Cap weight 2,3 g for highly carbonated drinks, water etc. 48 cavities Mold after service and replacement of several molding elements Available immediately...
2007 | 300046736 | HUSKY
Moulds for Closures. OMMP injection mould for fruit-oil closure 29/21, year 2012 16-cavity mould Neck: 29/21 edible oil Approx. weight: 1.7g Material: LDPE 8.1 million shots Includes: - Hot runner system Yudo. - Heating thermostat with connection cables (Multitherm 4...
2012 | 300045927 | OMMP
Moulds for Closures. Plastisud Mold (Made in France) Mold: 72 cavities Format: 30/25 low Weight: 1,82 gr Manufacturer: Plastisud Mould dimensions : Width 640 x Length 1 590 x Thickness 700 mm Press : Netstal Synergy 3500 Guaranteed cycle time with cooling to temperat...
2007 | 300041699 | PLASTISUD
Moulds for Preforms. HUSKY Cold Half System HyPET 120 year 2016 Neck PCO 1881 Weight 22.7 g, for 350-450 CSD Model: 32 50x130 GEN 3.5 Stroke 63 mm Max Capacity: 134t Shot Counter: Around 117,000 Set of new core change for 22.28g can be purchased to an additional...
2016 | 300043001 | HUSKY
Moulds for Preforms. HUSKY Cold Half System HyPET 120 year 2017 Neck 3025 Weight 17g, for 500-600ml water bottle Model: 32 50x130 GEN 3.5 Stroke 60 mm Max Capacity: 88t Rec. Capacity 85t Complete refurbishment done by HUSKY in 2017 Perfect condition and availa...
2012 | 300042893 | HUSKY
Moulds for Preforms. Used Cold half and robot plate for Husky injection molding machine Weight of the preform 30.4gr Neck: 26-22.12 P1 gravity II Lenght of the preform 119,20 mm Take out plate for the robot included the hotrunner is not included Mould stored Number o...
2016 | 300043449 | HUSKY
Moulds for Preforms. Husky cold half and robot plate Weight 9.5gr Neck: 26-22.12 P3 Cycle time: 6,7 sec Take out plate included 7.066.300 shots...
2014 | 300043450 | HUSKY
Moulds for Preforms. Used cold Half for preform Brand: Husky Weight: 12.5 gr Neck: 29/25 for still water Cavities: 96 cav. Pitch = 50 x 140 HPP 4.0 Mould number of shots: 305.185 take out plate ( with 384 pcs of tubes )+ coolpik tubes ( 96 pucks and 288 pcs of tubes):...
2014 | 300044628 | HUSKY
Moulds for Preforms. M PET Mold Masters Hot Runner for HUSKY HyPET 120 Year 2013 Perfect condition and available immediately! ...
2014 | 300042892 | MOLD MASTERS
Other Machines for Drinks. Steam generator Alba Makina from 2018 Model: D04-350 Steam output - 350 kg/h Weight - 600 kg Working pressure - 16 bars Fuel: gas natural The generator is new still on its pallet never been unpacked Complete technical documentaion including CE...
2018 | 300045882 | ALBA MAKINA
Other Machines for Drinks. Alliance- G0276 Can warmer Dimensions 7,6m x 4,2m Heat exchanger, conveyor belts and hardware included Available immediately! ...
| 300045258 | ALLIANCE
Other Machines for Drinks. Including: 1. Water treatment station (biological and chemical), year 2015, which includes: - Capacity: 300 m3 /day, only 750 running hours - 2 complete membrane bio-reactors - 2 recycling inox tanks, capacity 9 m3 each - air compressors for aerat...
2012 | 300039599 | AQUAMATCH
Other Machines for Drinks. Cross-flow filtration process system with bidirectional circulation flow Manufacturer: Bilek filtry sro Model: FCW 80A Year 2014 Output: 5000-8000 L of wine per hour The machine is fully automatic, the function of sending sms in case of completion ...
2014 | 300046766 | BILEK FILTRY
Other Machines for Drinks. Bottle Top Crystallizer for Preforms Capacity: 16,000 pph Crystallization operation on 1810 Neck preforms Includes: ·Hopper ·Orientor ·Crystallizer ·Air chiller ·Thermoregulator Machine available Immediately! ...
2008 | 300044054 | BOTTLE TOP
Other Machines for Drinks. Bottle Top Crystallizer for Preforms Capacity: 28,000 pph Includes: ·Hopper ·Orientor ·Crystallizer ·Air chiller ·Thermoregulator Machine available Immediately! ...
2009 | 300044053 | BOTTLE TOP
Other Machines for Drinks. Bottle Top Crystallizer for Preforms Capacity: 28,000 pph Includes: ·Hopper ·Orientator ·Crystallizer ·Air chiller ·Thermoregulator Machine available Immediately!...
2013 | 300046689 | BOTTLE TOP
Other Machines for Drinks. Oil-fired boiler plant The offer includes: - CERTUSS steam generator type Universal 700 TC with oil burner, including ancillary equipment (hot water filter, pre-pump, steam drier) with a capacity of 700 litres of steam/hour with a reduction stat...
2023 | 300045637 | CERTUSS
Other Machines for Drinks. Automatic EURO EPAL pallet inspection system from 2007 Ability to decide what items are to be verified, monitoring of damaged pallets The device comes with an electrical diagram In good condition and available immediately! ...
2007 | 300044819 | EURO EPAL
Other Machines for Drinks. Europool TF_02 bottle dryer, year 2015 Output: 15.000 bph Linear machine with air blades It has never been used Available immediately ...
2015 | 300046356 | EUROPOOL
Other Machines for Drinks. Beer separator GEA Westfalia from 2003 Capacity 25 t/h The machine is in very good conditions and available immediately! ...
2003 | 300041937 | GEA
Other Machines for Drinks. INTEC MICROFILTER NOW INNOTEC Automatic Microfilter year 1997 CE marked, INNOTEC, on SKID dimensions 3,7m x 1,5m. - Process speed at 10,000 bottles/h controlled with litre-counter - 3 Housings of microfiltration 12 candles 30" and one of 40" Conne...
1997 | 300045716 | INTEC
Other Machines for Drinks. Used Pallet labeller Brand: Logopak (made in Germany) Model: 815 PF Year: 2011 Working hours: 50.000 It was regularly maintained by an authorized supplier Machine was dismantled in 2022 and is available immediately! ...
2011 | 300044924 | LOGOPACK
Other Machines for Drinks. Robotic manipulator with a rotatory system of grippers It was used to unload products from metal and plastic crates from carts to deliver individual portions to the washing machine Consists of four segments: carriage positioning unit (carriage load...
2018 | 300046785 | MITSUBISHI
Other Machines for Drinks. 2000 bottles/hour 3 labeling stations 2 in-line capsule heads Double tray capsule accumulator of approximately 1000 capsules Three augers for Bordeaux, Burgundy and magnum bottles Sensor to detect plug Sensor to detect capsule Bottle filling sensor...
2016 | 300046492 | OMB
Other Machines for Drinks. Parker NitroSource NQ-20PBLY PSA nitrogen gas generator, year 2016 It provides nitrogen gas of 95% to 99,9995% equivalent nitrogen purity Flow rate: 21.6 m³/h @ 7 barg All technical documents are available ...
2016 | 300046104 | PARKER
Other Machines for Drinks. Water treatment by particle filtration Prominent from 2011 Model EL-110602-E1 Useful volume: 8000 L Tank dimensions: 2000 x 2700 mm Max. transfer temperature 30ºC Max. fill rate 2550 mm Max filling speed 10,0 m3/h Transfer pressure: atmospheric Den...
2011 | 300045688 | PROMINENT
Other Machines for Drinks. Reda RE70V centrifuge for wine, year 2002 Capacity: 25 000 L/H Maximum bowl speed : 7000 rpm Self-cleaning Includes: - wine tank at the end of fermentation - feed pump - clarifier - centrifuge (disk centrifuge for liquid/solids separation) - cla...
2002 | 300046100 | REDA
Other Machines for Drinks. Scaligera Ulisse 4000 sleeve machine for cans, year 2016 Output: 4000 cans/hour Sleeves for Sleek and Standard cans Machine orientation: left to right Includes Scaligera TVP2SE steam oven, year 2016 Machine in production until beginning September...
2016 | 300045825 | SCALIGERA
Other Machines for Drinks. Preform inspector with camara Stratec-Bull Model 3000 BMI/P from 2007 Was used with SIG Corpoplast Blomax 10 (with capacity 16.000 bph) Available immediately! ...
2007 | 300044671 | SRATEC
Other Machines for Drinks. Rotary Precoat Vaccum Drum Filter TMCI PADOVAN from 2010 Model TAYLO 15 Vaccum filtration on a diatomaceous earth or perlite precoat Process stages: - precoating - filtration and coating drainage - coating cutting and discharge - filtrate extr...
2010 | 300045506 | TMCI PADOVAN
Other Machines for Drinks. Bottle turning machine TTW Construction year 1999 For glass bottles 1L Invertor 180 degrees with central star and pneumatic vibrator For emptying loose particles in the bottle Approx. 10,000 bottles / hour Machine dismantled in April 2024 In ve...
1999 | 300046779 | TTW
Other Machines for Drinks. Carton sealer Youngsunpack from 2020 Model: MH-FJ-3A Work height: 500-710 mm Capacity: 12-15 cartons/min Box length: 150-600 mm Box width: 115-490 mm Box height: 110-490 mm Tape: PVX or PP; width: max 50 mm; core: 76 mm. It folds and closes the t...
2020 | 300046634 | YOUNGSUNPACK
Other Machines for Drinks. Processing part for brewery ZVU POTEZ a.s. (Czech Republic) Capacity 315 hl, up to 10 brews per day Includes: Hot water tanks Tanks for a solution of hop extract Wort tanks and pumps Tanks of the washing device Vortex turbulent tanks Grain d...
2002 | 300045658 | ZVU POTEZ
Packing machine for cans. Kettner Traypac T 45 from year 2000 Machine Capacity 45 cy/m 24-seater glued tray for shrink packaging Variable feed of packaging Hot bonding by means of an adhesive device Equipment: 3 layers preparation of four-packs 2 layers of preparation of...
2000 | 300040419 | KETTNER
Packing machine for glass bottles. Packer of glass bottles in cardboard boxes BERCHI from 2001 Model INCARTONATRICE WRAP-AROUND UNIWRAP 2A SX Capacity 1500 u/h Packaging options: -0,33L (2х3)х4 -0,5L (4х5) -0,75L (3х4) -1L (2х3) The machine is in good conditions It is possible to...
2001 | 300041412 | BERCHI
Packing machine for glass bottles. KHS Kisters MultiPacker 199/60 DZ shrinkwrapper for PET/glass bottles, year 1997 Nominal output: 50 packs/min (10.000 bph) Pack formats (on 2 lanes): 1x2/1x3/2x2/2x3 Includes: - Infeed belt with guides and KEB for the dosing conveyor - Grouping ...
1997 | 300044731 | KISTERS
Pallet wrapper. Used pallet wrapper Robopac Genesis Output: 30 pallets per hour Format: epal and dussedorf Pallet from 1200 x 800 height from 600 to 1800 Pallet from 600 x 800 height from 600 to 1800 Pallet from (600 x 800) + (600 x 800) together, height from 600...
2002 | 300046416 | ROBOPAC
Palletizer for cans. Sentry case palletizer unit for cans from 2013 Rated at 80cases/m Model 700 Several patterns programmed patterns Dismantlled and available immediately! ...
2013 | 300039503 | SENTRY
Palletizer for cans. SKA Depalletizer (GRX-FHA 3000)-Palletizer (GRX-FHP) - year 2022 DEPALLETIZER -Full-Height Automatic Depalletizer is a heavy-duty machine with a tubular carbon steel frame construction and aluminum side-walls. -It features a user-friendly HMI touc...
2022 | 300045366 | SKA
Palletizer for empty bottles. AND & OR model BM06-A1000 - 2016 Automatic bagging machine, self-made bag from rolls of thermo-shrinkable film Compact model This equipment is recommended for low cadences and steady bottles. It is usually installed after the blower and the leak ...
2016 | 300046428 | AND & OR
Palletizer for empty bottles. Automatic palletiser for empty glass bottles Promalyon, year 1998 Output: up to 6000 bottles / hour It works with 4 different models of empty bottles on 4 palletising tables at the exit of our washing line Includes: - palletiser, with a pallet...
1998 | 300042935 | PROMALYON
Palletizer for empty bottles. 1,000 bottle/minute Max bottle height 400mm Min bottle diameter 30mm Max bottle diameter 125mm Max palletizer height 2600mm...
2002 | 300040065 | ZECCHETTI
Palletizer. 5 bottles per row 4 rows per layer 8 layers in total...
2019 | 300046113 | AND & OR
Palletizer. ROBOT – universal – multipurpose Manufacturer: FANUC LTD – Japan – 2007 Robot R-2000 iB/165F – with control cabinet Worked in water bottling plant palletizing 19 L gallons It can also be repurposed for other transfer and stacking operations. It has...
2007 | 300045720 | FANUC
Palletizer. Kosme palletizer and Thimon stretch hooding machine, year 2009 Used on a line filling 12.000 bph Includes: - Kosme Palpack PS palletizer, year 2009 - Thimon Combi-Pal 2140 stretch hooding machine, year 2009 - Conveyor In production until the en...
2009 | 300046049 | KOSME
Palletizer. Automatic palletization system KUKA Offer includes: 3 x KUKA Robots from 2014 Capacity: 72 000 cph, in packs 6x4 Palletization for cans, was used for beer Machine in perfect working condition always serviced by KUKA with all maintatance reports a...
2014 | 300041903 | KUKA
Palletizer. PAI case palletizer 6251 was built in 1995. It was taken back into the manufacturer at Montgomery and refurnished (6251R) in 2005 It has a PLC 5/11 and that can be upgraded to a 5/20 if needed (this just adds more memory) Machine can run up to 40...
1995 | 300042728 | PAI
Pasteurization Tunnels. Sasib SCD5612 (Dual Deck- Single Pass) from 1999 Pasteurizing tunnel for cans ( 12oz, 16oz, 24oz)which can run 1200 can/min with additional 20% surge on Downline Length 102', Width 21', not currently being used right now but it can be turned on ...
1999 | 300045868 | SASIB
Pasteurizer for liquids. Desaeratoin unit Cavsys DC-65-15 with KZE Includes: - Saturator - Electrical control cabinet (Siemens S7) Available immediately!...
2011 | 300041813 | CAVSYS
Pasteurizer for liquids. CENTEK FPS100 flow-through pasteurizer for beer from 2004 Capacity: 100 g l / hour Pipeline diameter: DN 50 Pasteurization temperature: 65-80 degrees Pasteurization unit: 20-30PU Maximum CO2 content: 6g/l Dismantled and available immediately! ...
2004 | 300041180 | CENTEC
Pasteurizer for liquids. Pasteurizer KHS Innopro KZE 21/T14-98-12 PT100 A Construction year 2018 For soft drinks Includes: 1 Buffer tank 2 Machine frame 3 Hot holder 4 Plate heat exchanger 5 Control cabinet 6 Distributor for setting the hot holding time CIP cleaning Sy...
2018 | 300045899 | KHS
Pasteurizer for liquids. Juice compound processing line Möstl & FBR ELPO, year 2018 Capacity: from 2.000 to 4.000 l/h Manufacturers: Möstl Anlagenbau GmbH (Austria) & FBR Elpo Spa (Italy) PLC Siemens S7 Includes: Powder Dissolving Unit & Concentrate Discharge Station Mös...
2018 | 300042442 | MÖSTL
PET Filler for W&SD. Used monobloc for sparkling water and soft drinks Bottling machine Manufacturer: Cortellazzi Model: Vega 40 Year: 2000 Nominal capacity: 5000 bottles/hour Num of heads: 40 Neck configuration: PCO 28 Type of valve : Isobar Rotary screw capping mac...
2000 | 300041872 | CORTELLAZZI
PET Filler for W&SD. Eurostar filler for CSD & OPP PE labeller & Heuft level controller, 10.000 bph, year 2013 Output: 10.000 bph (0.25l glass), 4500 bph (0.5l, 1l PET), 4200 bph (1.25l, 1.5l PET), 3600 bph (1.75l PET) Bottles: Glass, PET and other polymers Neck: PCO ...
2013 | 300042435 | EURO STAR
PET Filler for W&SD. Nate Rotus PET filler Year 1998 60 filling heads, 12 cap heads with rinser Capacity of 1,5L bottles: 8000 bph Available immedietaly!...
1998 | 300044801 | NATE
PET Filler for W&SD. Used Monobloc for Carbonated water and Soft Drinks Isobaric valve Brand: Sympak made in Italy by BC bottling and canning Model: Master 24/24/6-6 Neck: PCO 1810 Year 2005 Capacity max. 6000 bottles/h at 1,5L machine dismantled and stored in the...
2005 | 300042367 | SBC
PET labelling machine. Labeller Officine AVE from 1997, made in Italy Hot Glue Pre cut labels 12 heads dimensions of the label are: - 309x46 - 315x64 Formats: 0,50 - 0,75 - 1,00 - 1,50 - 2,00 Machine in working condition, available immediately...
1997 | 300037032 | AVE
PET labelling machine. Labeller BRB Mega 12-200 from 2005 - Speed of the machine: 10.000 bph - Format and dimensions of the label: 0,5L 215X45 mm, 1,0L 258X60 mm, 1,5L 285X62 mm - Working hours: 13.000h - Labels are paper or plastic and hot ...
2005 | 300040197 | BRB
PET labelling machine. Cavagnino & Gatti CG84CL2/20/3XPSH labeller, year 2007 Output: 10.000 bph Glass bottle formats: 0.75L & 1L Number of labeller stations: 5 (2 trad + 3 adhesives) Type of label: paper & PP Type of glue: cold & heaters Label location: front, back Ma...
2007 | 300046098 | CAVAGNINO & GATTI
PET labelling machine. Labelling machine Gernep from 2012 Model Rollfed 8-480 1RA Capacity up to 8.000 bph Label dimensions: min. lenght (bottom edge) 180 mm max. lenght (upper edge) 370 mm max. height 120 mm Length of conveyor 1900 mm Can work with bottles 0,7L, 1 l...
2012 | 300045253 | GERNEP
PET labelling machine. KHS Neo 80 labeller from 2019 Never used and in in original boxes Includes: Pre labelling inspector Neo labeller 80-105 2KL 2 labelling stations Bottle diameter: 45-90mm Bottle height: 110-380mm Change parts for 4 formats Label size. 40-120mm w...
2019 | 300045157 | KHS
PET labelling machine. Automatic labeling machine KOSME TOP STAR 960 20T S2 E4 from 2003 General overhaul carried out in 2018 Paper labels (main and counter) cold glue Equipped with two stations including label magazines Each station has five label transfer pads The c...
2003 | 300044820 | KOSME
PET labelling machine. Used PET bottle labeller Brand: Kosme (made in Italy) Model: TOP II HM 16/720 SH1 E1 Year: 2012 Production: 20.000 bph Machine disconnected and available immediately! ...
2012 | 300046419 | KOSME
PET labelling machine. Kosme Sensicol 1200-10-4 rotary labeller, year 2015 For self-adhesive labels, made of paper or plastic Output: 10.000 u/h It has never been used Available immediately ...
2015 | 300046355 | KOSME
PET labelling machine. Krones Canmatic labeller Used for 400ml, 650ml and 1.5L bottles 35.000 hours worked In good condition and available immedietly ...
2005 | 300043537 | KRONES
PET labelling machine. Used Labeller for pre-cut labels Brand: Krones Production: 15 400 bottle per hour, format 0.5 l. Type of Label: pre-cut Operating hours: 28349 Labels are wraparound. Type of bottle: round Dimension of the label: 231x78 Formats 0,5 and 1,0 Suitable...
2010 | 300044051 | KRONES
PET labelling machine. Pallet Labeler Logopak Logomatic 920 II PFRK Capacity 80 packets per hour It prints and applies self-adhesive labels to pallets Posibility to stick the label on 3 sides of the package (front, side and back) Printing head 920 II V2 The labelling ...
2008 | 300046235 | LOGOPAK
PET labelling machine. Labelling Machine P.E. Labellers Modular Plus from 2015 2 cold glue labeling stations plus one double station for self stick label 3 labels; main, back and neck Machine is labeling paper label on PET bottel Orientating bottle by v...
2015 | 300039120 | PE
PET labelling machine. Labeling machine PE FUTURA 6T/540/1S-1E for PET bottles Year 2006 Capacity 10,000 un/h The machine can also apply labels to a square bottle Machine is diismantled and available immediately! ...
2006 | 300043348 | PE
PET labelling machine. Labelling machine for PET bottles from PE LABELLERS from 2001 Capacity 6000 bph Max size of bottles 1,5L Cold glue The machine is installed and can be seen in production Available immediately! ...
2001 | 300041764 | PE LABELLERS
PET labelling machine. Labeling machine PE SPLENDID PET bottle size 0,5L Paper label, cold glue The machine is dismantled, but can be inspected Available immediately!...
2002 | 300042061 | PE LABELLERS
PET labelling machine. Roll Fed labeller P.E. Labellers Year 2008 Production 8000 bph Hot glue Machine installed but not in running condition, available immediately! ...
2008 | 300043527 | PE LABELLERS
PET labelling machine. Used labeller for self-adhesive labels Brand: PE Labellers Model: Modular SL 576-6-SM-4P Year: 2020 Working Hours: 362 Self adhesive labels - one label head Machine used for a short period of time because the project was cancelled machine dismantl...
2020 | 300046710 | PE LABELLERS
PET labelling machine. Sacmi -Opera Modul 400 labeller For glass or PET bottles Includes PSC application stations and cut/stack applicator Rotary 33T stations ·583 bpm for pressure sensitive ·833 bpm for Hot Melt In dry storage, available immediately! ...
2013 | 300042293 | SACMI
PET labelling machine. Used Simonazzi (Alfa) used roll-fed labeller for PET plastic bottles -the labeller speed is 7.500 b/h at the moment , but can run till 12.000 b/h -working hours: 18174 h machine in working condition ...
2002 | 300046471 | SIMONAZZI
PET labelling machine. Trine labeller from 2005 Roll-fed with hot glue For pet or glass Speed - 350 , 500ml - 400 to 450bpm 1.0L ,1.5L - 250 to 300bpm Label size 350ml - 2.25” x 7.625” ...
2005 | 300039538 | TRINE
PET labelling machine. Trine 650 roll-fed from 2002 Disconnected and available immediately! ...
2002 | 300039559 | TRINE
Printing machines for food and beverages caps. Printing machine for caps MOSS MO-3062/3 (Italy) Capacity up to 72000 pieces per hour Printing machines for caps of PCO1881 and 1810 standards Possibility of applying three-color printing...
2012 | 300041621 | MOSS
Printing machines for food and beverages caps. TAMPOPRINT printing machine 3 colors in 1 lane Type of ink: Solvent-based ink 28mm caps 45.000 caps per hour Machine was never used in production, only commissioned Available immediately...
2019 | 300043654 | TAMPOPRINT
Printing machines for food and beverages caps. Tampoprint Rotoprint rotary pad printing on bottle caps 28mm dia x 16mm tall Tamper evident speed 2000 caps per minute 3 colors 22 hours running time only Running Clockwise Still installed and can be seen running...
2020 | 300046838 | TAMPOPRINT
Printing machines for food and beverages caps. Tampoprint Rotoprint rotary pad printing on bottle caps 38mm dia x 16mm tall Tamper evident speed 1500 caps per minute 3 colors Running clockwise Year 2021 with only 19 hours running time CE Certification ...
2021 | 300046837 | TAMPOPRINT
Rotary compression moulding press. Complete compression molding system for two pieces closures Product: PCO 28mm Capacity 3,2 cycle per min System including: 32 stations SACMI CCM 001 press from 1998 - Complete set of tools for the production of AF6 closures, weight of the ...
1998 | 300030174 | SACMI
Rotary compression moulding press. Used Sacmi line for closures Includes the following: Sacmi CCM 003 from 2006 With lining and slitting machine Includes 1810 tooling Sacmi CCM 001 from 2003 Can be seen running and available immediately! ...
2006 | 300045648 | SACMI
Rotary compression moulding press. Complete compression moulding machine SACMI CCM003 from 2009 CCM 2009 @ 32 281 hrs PMD 2009 @ 25 996 hrs FSM 2009 @ 6966 hrs The line includes: Compression Moulding machine CCM 003 Set of tools (AB28-1810) Set of Tools (AB 45mm)Gravimetric mi...
2009 | 300044147 | SACMI
Rotary compression moulding press. Sacmi Compression Molding Machine year 2013 Includes: - Molding Press CCM48SA - Mold 48 cav. 29/25 1.2gr - Scoring Folder machine SCM 12L - Cap hopper and sorter - Automatic Box Filling machine - Auto cap quality inspection system (it i...
2013 | 300046539 | SACMI
Rotary compression moulding press. Sacmi Compression Molding Machine year 2011 Includes: - Molding Press CCM48SA - Mold 48 cav. 29/25 1.2gr - Scoring Folder machine SCM 12L - Cap hopper and sorter - Automatic Box Filling machine - Auto cap quality inspection system (it ...
2011 | 300046538 | SACMI
Rotary compression moulding press. Sacmi Compression Molding Machine year 2015 Includes: - Molding Press CCM24SB - Mold 24 cav. 30/25 1.7gr - Scoring Folder machine SCM 12LB - Camara CVS 052D - Automatic Box Filling machine - Material feeding system and color masterbatch ...
2015 | 300046741 | SACMI
Rotary compression moulding press. Used Sacmi CCM 002A 64 heads Year 2004 working hours: 89.700 Unscramble Pesce Elsak Mold: 37mm neck included in the deal BTV and CVS included Piovan polymer hopper not included The compression molding wheel had been substitued in 2021 Oil and wa...
2004 | 300046742 | SACMI
Rotary compression moulding press. Used Sacmi CCM 003A 32 heads Year 2007 working hours: 74.000 Unscramble Pesce Mold: 28mm diameter included in the price CVS 051B included SCM 12LA included Piovan polymer hopper not included The compression molding wheel had been substitued in 2...
2007 | 300046743 | SACMI
Rotary compression moulding press. Laser Printing machine TAMPOPRINT (2008) Output 100.000 caps/h Laser printing for caps. It was part of SACMI press The printer is in good condition and available immediately! ...
2008 | 300038698 | TAMPOPRINT
Rotary compression moulding press. ROTOPRINT RTI 2000 Automatic 3 colour tampoprinter Capacity 750 units/min Available immediately! ...
2001 | 300046288 | TAMPOPRINT
Shrink wrapper for cans. Shrink wrapper DIMAC STAR 45T from 2006 For glass bottles or cans (0,5 L), conserves, potentionaly PET (up to height 41 cm) - foil and trays (coasters) Working hours ONLY 14.000. Type of packaged goods Bottles, Cans, Cans, Pots, Multipacks, Bricks...
2006 | 300046573 | DIMAC
Shrink wrapper for cans. Krones Variopac shrink-packer with pad, year 2018 Speed: 120 packs/min, up to 3 lanes Infeed: 10 lanes Foil : transparent & printed shrink film Cans : 33cl standard – 33cl sleek possible Minimum rated Line speed by size: 150ml: 120,000 cph 250ml...
2018 | 300042278 | KRONES
Shrink wrapper for cans. Used Shrink wrapper for cans Brand: Ocme Model: Vega HT 150 Machine works only with film Format of the can is 330ml Sleek or 250 Slim The machine has 3 lanes so it can wrap from 150 to 450 packs per minute Dismantled and available immediately...
2016 | 300042997 | OCME
Shrink wrapper for cans. Used Shrink Wrapper for cans Ocme Vega HT 100 2/3 Speed: 300 packs per min and approx 100.000 cph Format of the can 330ml Machine is excellent working condition ...
2019 | 300043031 | OCME
Shrink Wrapper for PET bottles. Wrap-Around Case Packer and Film Wrapper Atlanta COMBI, year 2012 Output: 25 packages/trays per minute Product size: 600ml to 1500ml Packaging: Wrap-around or Tray + film Bottles: PET or glass Pattern: 6x4, 4x3 Available immediately!...
2012 | 300046526 | ATLANTA
Shrink Wrapper for PET bottles. Baumer shrink-wrapper for PET bottles Original year of manufacture by Baumer unknown Completely overhauled by SGE SRL in 2005 Available immediately...
| 300046358 | BAUMER
Shrink Wrapper for PET bottles. Automatic Packer and Shrinkwrapper BBM Мodel: model LSK30/F YEAR: 2019 (renovated) Description: N. 1 Infeed conveyor N. 1 Automatic shrink wrapper N. 1 Shrinking tunnel Renovated equipment - Automatic overlap shrink wrapper with inline inf...
2019 | 300046815 | BBM
Shrink Wrapper for PET bottles. Shrink wrapping machine DIMAC Star F 45, year 2004 Max. speed: 45 packs/minute, 6-bottle packs, 16.200 b/h With 4 lanes, they've produced different packs (3x2, 2x2, 4x2, 4x3..) on 4 different formats It can pack PET, glass, cans and aluminium cans,...
2004 | 300043274 | DIMAC
Shrink Wrapper for PET bottles. Tray with shrink packer, DIMAC, model: Blue Star, from 2008 Capacity: up to 35 packs/ minute Air consumption: 100 NL/MIN Max. pressure: 6 bar Power: 3 x 415V Product patterns: 200 ml - 4X5 300 ml - 4X3 & 4X5 600 ml - 4X3 1500 ml - 2X3 Available...
2008 | 300045639 | DIMAC
Shrink Wrapper for PET bottles. Dimac: Star Film HS Film warpper without traywith shrink tunnel 40+ packs per minute Available immediately! ...
2002 | 300045606 | DIMAC
Shrink Wrapper for PET bottles. Douglas SPS-50 24 packs x 20 onces Format: Tray shrink 32 cases/minute Available be inspected immediately and available in March ...
2012 | 300046434 | DOUGLAS
Shrink Wrapper for PET bottles. Hartness shrink wrapper Model 4520-80 Year 2016 Global Shrink It is a 6 lane machine set up to run 2/ 6pk or 3 /4pk per cycle It is rated at 80 cycles per min. That is 960 bpm 480vac Allen Bradley PLC and servo controls Comes with layer form...
2016 | 300046475 | HARTNESS
Shrink Wrapper for PET bottles. Kosme Vialiner 1B bottle or pack divider, year 2015 It feeds the infeed lines of a packaging machine 1 to 3 lanes for 100cl bottles (up to 110mm diameter) 1 to 4 lanes for 75cl bottles (up to 90mm diameter) 1 to 5 lanes for 33cl bottles (up to 70m...
2015 | 300046360 | KOSME
Shrink Wrapper for PET bottles. Used Shrink Wrapper for bottle packaging Brand: Ocme Model: VEGA HT 40/2 Year: 2013 Formats: 33cl bottle, 4pack & 6pack 50cl bottle, 4pack & 6pack Secondary packaging is made with an Ocme Vega HT 40F Machine installed but not running ...
2013 | 300045710 | OCME
Shrink Wrapper for PET bottles. PMI Tray Shrink Bundler-Wrapper & Heat Tunnel Model Number CSI-20 - Mild Steel Construction with Steel-It Paint Coating - Straight Through Conveyor Design - Single Lane Design -maximum speed up to 25 trays/minute depending on applications - Bul...
| 300046558 | PMI
Shrink Wrapper for PET bottles. Polypack- PH-32HL right angle Shrink bundler Formats: 6 packs, 12 packs, 18 packs and 24 packs It can do just shrink wrap and use trays to package. Equipped with a MGS Pad Inserter set up with 10" wide x 17" long pads 15" tall x 25" wide x 64" de...
| 300042756 | POLYPACK
Shrink Wrapper for PET bottles. Sidel Versafilm F9 packer Used for wrapping 24-packs of 410ml and 500ml Only film 35.000h of use Available immediedtly! ...
2015 | 300043538 | SIDEL
Shrink Wrapper for PET bottles. SMI wrap-around case packer from 2005 Dimensions of boxes: Length: Min - 280mm, Max - 485mm Width: Min - 165 mm, Max - 280 mm Height: Min - 150mm, Max - 420mm Specifications: Electro-pneumatic drive and control system Maximum capacity is 1400 box...
2005 | 300036514 | SMI
Shrink Wrapper for PET bottles. Semi-automatic SMI Shrinking line PB 800 Packer including shrinking tunnel Construction year 2008 for all kind of beverages, cans and bottle packs Capacity : 360 - 600 packs / h depending on size product length min. 110 / max. 630 mm product widh...
2008 | 300041913 | SMI
Shrink Wrapper for PET bottles. Automatic two-row SMI LSK 42 F packaging machine from 2002 Output of 42 packs per minute The packer has an electrical heating tunnel with automatically controlled air blow and exhaust It has adjustable flaps for precise directing of hot air to the...
2002 | 300044821 | SMI
Shrink Wrapper for PET bottles. SMI Shrink Tunnel with capacity of 20 000 cph.(15 t/min ) Model LSK 15 Line was in working condition until end of November 2017 Machine was working with 0,5L cans Installed power 12 kW Presure 6 bar Dimensions: 3.000 x 1.400 x 1.150 mm Can be insp...
2003 | 300045047 | SMI
Shrink Wrapper for PET bottles. SMI Shrink Wrapper machine for PET Bottles 1. Format 4x3 film +pad and 6x4 film+pad 2. Speed 30ppm with format 4x3 and 15ppm with format 6x4 3. Can work with 500 ml, 600ml and 1500 ml PET bottles Running hours: 39.000 Machine Available Immediatel...
2018 | 300046086 | SMI
Shrink Wrapper for PET bottles. Automatic shrinkwrapper SMI from 2020 with 90 infeed Model: BP802ARV 350R-S Never used Up to 25 packs/minute Sealing bar: 760 mm Maximum pack height: 380 mm Infeed lanes: 1-2 (optional 3-4) Multi-trust system Sorter unit ar infeed Pack compositio...
2020 | 300046577 | SMI
Shrink Wrapper for PET bottles. X-Pack shrink wrap bundler: XP-S8060CD Format: 200ml 6pk 200ml 8pk 10oz 6k 333ml 6pk The six packs are two packs/cycle 8pk is one pack per cycle Still in production untill December 2023 ...
2012 | 300045708 | X-PACK
Sleever for PET bottles. Clever sleever for PET bottles Type: rotatory Output: up to 36.000 bph 3 application heads Type of sleeve: Total / partial top and bottom / tamper evident seal Available immediately! ...
2012 | 300045240 | CLEVER MACHINES
Sleever for PET bottles. Used FINPAC SHM 2B sleever from 2006 Speed: 9000 bph Machine hours: 2500 hours Formats: 0.1 - 1.5 L Manuals:Yes Rotation direction: Linear Spare parts included Can be shown in dry cycle ...
2006 | 300042085 | FINPAC
Sleever for PET bottles. GRAHAM A36038 Sleeve machine Year of construction: 2005 Modernization: 2014 - 2018 Parameters of original roll: shaft: 256, max. d: 600 mm. Sleeve parameters: sleeve width: 140 mm, thickness from 0.4 mm. Production speed: from 200 pieces per minut...
2005 | 300043453 | GRAHAM
Sleever for PET bottles. Used Sleever for plastic cups for food and dairies Brand: Scaligera Packaging Model: ULISSE 4000 Year: 2007 The machine is includes the following parts: - ULISSE 4000 Sleeve machine (sleeve thickness 45-70 micron, high shrinkage rate) - Sleeve ...
2007 | 300044986 | SCALIGERA
Sleever for PET bottles. Scaligera Sleeve machine from 2013 Model ULISSE 6000 + HOT AIR TUNNEL from 2013 MODEL TA4L Max. capacity 8000 pc/h Min/Max diameter of container (Neck) – 40/115 mm Outside diameter of foil roll – 400 mm Width of folded foil (layflat) – 45-180 mm C...
2013 | 300045254 | SCALIGERA
Sleever for PET bottles. Used sleever for PET/Cans/glass bottles Production: 2000 cph Includes oven and sleever Machine disconnected but it is possible to be tested in dry cycle ...
2020 | 300046322 | SCALIGERA
Sleever for PET bottles. Complete sleeving line Sleever International 130 SL 2V 90, year 2001 Output: max 4500 b/h (currently running at 3000 b/h) Includes: - Powersleeve Mono 130 SL 2V 90 laying machine - Sleeve blocker - Powerskinner shrink tunnel - Conveyors - Pot ex...
2001 | 300043819 | SLEEVER INTERNATIONAL
Sleever for PET bottles. Sleever Brand Sleever International Type Sleevercombi Steam 100 SL 2 V - 600 / 300 Manufactured in 2015 For 65 ml milk drink bottles Capacity 32'000 bottles / hour Working hours 25.000 In very good conditions and immediately available! ...
2015 | 300043805 | SLEEVER INTERNATIONAL
Stretch blow moulding machines. 1Blow 4 cavity blow molder 2016 This is a 4 cavity linear stretch blow molder. This machine can handle both 28mm and 38mm finish. Machine comes with -Blow molder -Preform dumper -Preform hopper and conveyor -Preform unscrambler -Change parts for...
2016 | 300046115 | 1BLOW
Stretch blow moulding machines. Blower ADS type 62 GD05 construction year 2003 including preform loading hopper 2018 Locking system renewed Bottle sizes - PCO28 - 28/410 - 29/21 - 38mm 2-start / 3-start Available 38mm 2S und 28/410. Working hours 60.000 Can be inspected imm...
2003 | 300046525 | ADS
Stretch blow moulding machines. AMSLER WAE L22 blow molder 2 cavities 1.100-1.200 bph Filling 1 ltrs pet bottles Includes Automatic preform loader but no dumper Available Feb - March 2022...
2001 | 300042208 | AMSLER EQUIPMENT INC
Stretch blow moulding machines. Used ARCOR Multiblow-02 Details Blower Technical Parameters: Made in Germany – 2013 EC conformity certificate Cavity-04 Productivity based on 1L- Max 6000 bh Connection Parameters: Electrical Parameters: · Power supply: 3 phase+ ground + Neut...
2013 | 300045942 | ARCOR
Stretch blow moulding machines. Wide mouth blow molding machine. Cav: 1 Neck: up to 130mm. Current feetings: 120mm Capacity: up to 12L. Output: 400bph Feeding: Conveyor Working hours: Less than 1.000hours (used for tests) For protein pots or similar Blow molds available: 4, 6, 8...
2015 | 300042366 | CHUM POWER
Stretch blow moulding machines. KHS Blomax 6 - 1998 Neck is 1810 120 bpm for 500 ml Included: -Tipper -unscrambler -pform track - mold chiller -molds for 500ml and 1.5l...
1998 | 300044316 | KHS
Stretch blow moulding machines. KHS Blomax 6 PH, year 2003. Was producing glass cleaner (Clin) with it, small Neck capacity 3.500 bottles / hour Working hours 52.000 h Boxkipper and preform alignment included Hopper included Stretch rod included Very good mantained, can be in...
2003 | 300045884 | KHS
Stretch blow moulding machines. KHS InnoPET Blomax 18 S Consrtuction year 2010 Capacity 36.000 Fl/h – 330 ml Counter number of bottles produced : 11.668.802 Including: Preform silo Preform feeding and alignment If required the air transport Krones approx. 120 m with adjustab...
2010 | 300046489 | KHS
Stretch blow moulding machines. Bottle size: 250ml to 2,500ml Max diameter: 110mm Max height: 350mm It's currently set for 30/25 but the interchange parts for 1810 are available and included. It includes: - Preform hopper and elevator - Chiller for cooling machine / mold: Tae Evo...
2003 | 300034161 | KOSME
Stretch blow moulding machines. Kosme KSB 4L linear stretch-blow moulder, year 2005 4 cavities, max output: 6.800 bph Container sizes: from 0.1l to 3l Energy efficient, with a modular oven. Quick semi-automatic mould change. Air recycling: a lower-capacity compressor is sufficient....
2005 | 300035541 | KOSME
Stretch blow moulding machines. KOSME KSB4000 from 2002. Capacity : 4000 bph. Neck 28 mm PCO 1881 For bottles 0.33-1.5L The offer includes bunker and preform orientator. Machine is available and can be inspected immediately....
2002 | 300043489 | KOSME
Stretch blow moulding machines. Used Blow molding machine Kosme Model: KSB 4000 Neck: D 38 mm/PCO 28 mm the machine will be dismantled the 27th of March 2024 ...
2009 | 300046723 | KOSME
Stretch blow moulding machines. Krones Contiform S14 stretch blowing machine Output: 21.000 bph for CSD, 25.200 bph for non-CSD Hours worked: 44.872 It includes: - MDK preform auto loader, from 2006 - Aicool XB 2,5 P - WT chiller, from 2014 - Air conveyor (50m) from 2006 - Belli...
2006 | 300037132 | KRONES
Stretch blow moulding machines. Blow molding machine Krones Contiform S-10 from 2003 Dismantled, in very good condition and available immediately! ...
2003 | 300040034 | KRONES
Stretch blow moulding machines. Blow molding machine Krones Contiform S-12 from 2005 • The oven has 11 lamp stations that in turn each control 9 lamps for distribution depending on the blowing format in which it works. • The opening and closing of the lock is by means of cams, it ...
2005 | 300041064 | KRONES
Stretch blow moulding machines. Used blow moulder Krones Contiform 6 from 2001, first generation Neck: PCO 1881 It includes: - Hopper - Elevator - Uncramble - Feeder - Mould chiller KLB S45 machine in working condition till September 2022...
2001 | 300043958 | KRONES
Stretch blow moulding machines. Lanfranchi LG2 - Blow molder for pet 1 gallon/38mm neck @ 1900 BPH. 1 liter,,2 liter,3 liters or 5liter can be run on this machine. Working hours are 44k. Included: -preform loading system i -preform dumping -conveying system -robotic bottle ...
2018 | 300046348 | LANFRANCHI
Stretch blow moulding machines. Stretch blowing machine SB 8010 model LB 4* 3 YoM 2006 Capacity 7000 b/h PCO 1881 The machine is dismantled, can be inspected in dry cycle and available immediately. Video is also available....
2006 | 300041678 | LONZA
Stretch blow moulding machines. Nissei ASB HSB-10 Hot Fill Stretch Blow Molding Machine Working Hours 20,817 Type of Neck 28 MM Type of Mould available 350 ML Number of cavity of blowing ...
2008 | 300041450 | NISSEI ASB
Stretch blow moulding machines. NISSEI ASB BLOWER NB 40 SC Manufacturing year: 2008 Max Bottles size 4 Cavs 1.5L Type of neck 28 Capacity 3600 BPH Working hours 22,000 Includes technical documentation ...
2008 | 300041526 | NISSEI ASB
Stretch blow moulding machines. Blow molder- Pet Technologies APF 3002- 2018 2 cavities with 4 heaint bank- Linear Includes air-recovery and VPNaccess set up for PCO 28 finish Includes: - 6 different drinkwared product molds 8oz, 12oz, 16oz cups - Can also blow regular bottl...
2018 | 300043340 | PET TECHNOLOGIES
Stretch blow moulding machines. Blow molder Sacmi SBF 408 - 2012 8 cavities production 21,600 b/h running with 500ml Availble in April Includes: hopper, chiller, feeder and molds for 500ml ...
2012 | 300039706 | SACMI
Stretch blow moulding machines. Sacmi SMI SR 6 blow-moulder for PET bottles, year 2008 Output: 8400 bph (1L) / 7000 bph (1.5L) Neck: 21/29 (vinegar PET bottles) Includes: - Hopper - Spare parts (blow head, slides, bearings...) - Technical documentation For sale since they're re...
2008 | 300046827 | SACMI
Stretch blow moulding machines. Serac blow molding machine- SBL SL7/8 - 2020 Neck 38 7 cavities Output 10.500 u/h Still installed and can be seen with material. In excellent condition and used for trials only...
2020 | 300044739 | SERAC
Stretch blow moulding machines. Used Siapi blower EAS 50.115/7 Two neck formats: PCO 1810 and 29/21 Oil Maximum diameter of the bottle: 106mm Maximum height of the bottle: 350 Air flow: 650 Nm3/h machine dismantled and stored in a container. machine has been dismantled in Janua...
2004 | 300042525 | SIAPI
Stretch blow moulding machines. Blow moulding machine Siapi EASP 20/200 Capacity: 2.500 bph x 2 l No tools offered Complete machine - switched off 3 years ago Compressor Tempo Tehnika 350, 2004 (made in Serbia) Speed: 1100 rpm, Power: 75 kW, Pressure: 42 bar Air dryer: Boge du...
2004 | 300043262 | SIAPI
Stretch blow moulding machines. Side TMS 2004e stretch blowing machine Bottle size: 250ml - 2.500ml Max diam: 110mm Max height: 350mm It includes: - Preform hopper - Elevator - Chiller for cooling machine / mold...
2003 | 300034164 | SIDE
Stretch blow moulding machines. BLOWMOULDER SIDE BARCELONA Manufacturer: SIDE, Spain Year of production: 2002 Capacity: 2.000 bph x 6,0 l PET Mould:6 and 8,5 l with 2 cavities Machine with hopper working hours 15.000 The machine is configure to produce 6 and 8.5 lt bottles. nec...
2002 | 300037968 | SIDE
Stretch blow moulding machines. Side TMS 2004e reheat stretch blow molder, year 2014 Output: 5.600 bph Short neck PCO 1881 Includes: - Mould PCO 1881 - Dryer - Dehumidifier - Chiller - Hopper - Dumper - Preform loader - Spare parts - Technical documents It is currently dismant...
2014 | 300045922 | SIDE
Stretch blow moulding machines. Side-TMS 2001-M Year 2010 Cavities: 2 Technical Handbook available Neck 28/400 and Neck 28/410 Volume: from 2lt to 8lt machine is not running but it works properly...
2003 | 300046068 | SIDE
Stretch blow moulding machines. Side-TMS 1002e Year: 2010 Number of cavities: 2 Available from October 2023 Technical handbook available Possibility to add conveyor, bagging machine, preform loader and leak tester...
2010 | 300046065 | SIDE
Stretch blow moulding machines. Side-TMS 1002e - Cavities 2 - Technical Handbook not available - Machine not in production - Some missing parts to make it work to be defined - Neck: 40mm for detergents ...
2006 | 300046069 | SIDE
Stretch blow moulding machines. Side-TMS 2004e Year 2007 - Machine is working - Technical handbook available Neck: 40mm for detergent and cosmetic bottles ...
2007 | 300046476 | SIDE
Stretch blow moulding machines. PET blow molding machine Sidel SBO8-series2 Formats: 0,5, 1l, 1,5l and 2l bottles Neck 38mm Preform feeding system The current condition is that some parts had been removed but can be reinstalled (ex. Preform oven chain, air rotary union etc) Wo...
2000 | 300040746 | SIDEL
Stretch blow moulding machines. Sidel SBO 4 Compact blowing machine, year 2007 (with high-pressure compressor) Output: 6.400 bph (for 0,5l) / 6.200 bph (for 1,5l) It includes: - Bellis &Morcom compressor, VH9H3N (year 2008), 580 m3/h, 985 rpm, 110 kW - TEFA chiller, Platinium 370...
2007 | 300036501 | SIDEL
Stretch blow moulding machines. Blowing machine SIDEL SBO 6 Series 1 from 1996 Capacity 6000 b/h Neck type 1881, 28mm The machine is dismantled and available immediately...
1996 | 300041994 | SIDEL
Stretch blow moulding machines. Blowing machine Sidel SBO 4/4 from 1995 Output 4400 b/h PCO 1881 Bottle size 0,25-2L The offer is included: loading hopper, preform feed conveyor, orientator, mold cooler, chiller The machine is still in production and available immediately....
1995 | 300042545 | SIDEL
Stretch blow moulding machines. - Blow molder Sidel SBO 6 Series 2+ - Year 2005 - Machine stopped in 2021 - Production: 9.600 bph with format 1.5lt - Caterpillar Oven ...
2005 | 300043404 | SIDEL
Stretch blow moulding machines. BLOW MOLDING MACHINE SIDEL SBO 6/10 Brand: SIDEL Model: SBO 6/10 Series 1 Year: 1995 Mechanical Speed: 7200 BPH Change Part: 3025 & 2925 neck finish personalization kits Installed Power: 220KW Auxiliary Equipment: - Preform loader, hopper and Unsc...
1995 | 300043461 | SIDEL
Stretch blow moulding machines. Sidel Synergy PET Strech blow molding machine Including: Blow molding machine 2 cavities 1 Bin 1 unscrambler 1 Electrical Cabinet 1 pair of Mold Available immediatly...
2013 | 300044869 | SIDEL
Stretch blow moulding machines. Used Stretch blow moulding machine Brand: Sidel Model: SBO 8 Series 2 Neck: PCO 1810 Oven: Caterpillar Proform dumper included machine installed but not running available immediately ...
1999 | 300045746 | SIDEL
Stretch blow moulding machines. Used blow molding machine Sidel SBO 10/10 Series 1 Year: 1994 machine in working conditions till december 2023 ...
1994 | 300046244 | SIDEL
Stretch blow moulding machines. Used blow moulding system SIDEL SBO 14 Series S2 Construction year 2000 Current capacity: 19,600 bph in 600 ml CC 14,000 bph in 3.0 L CC Number of moulds: 14 Moulds included : No Moulds quick change? Yes Formats produced: 600 ml to 3 ...
2000 | 300046329 | SIDEL
Stretch blow moulding machines. Used Stretch blow moulding machine Brand: Sidel Model: SBO 8 Series 2 Neck: 29/25 and PCO 1881 Oven: Caterpillar Working Hours: 20.000 Proform dumper included machine running and available in the middle of january available immediately ...
2004 | 300046359 | SIDEL
Stretch blow moulding machines. Used stretch blow molding machine Sidel SBO 8/10 Universal Production: 16000 bph Neck: Milk Ovens: 10 Mandrels: 200 Grippers: 4-4 Direction: Anti-clockwise PLC Siemens Machine Guarantee by the seller working hours: 68.000...
2006 | 300046516 | SIDEL
Stretch blow moulding machines. Blow molder Sidel SBO 14 Series 2 HR Speed: 18,000 bph Year: 2003 Auxiliaries: - Preform Dumper - Complete infeeding system - Vulcaterm Heat resistence Machine available Immediately!...
2003 | 300046712 | SIDEL
Stretch blow moulding machines. SIPA 16 Cavity PET Reheat Stretch Blow Molder, model SFR 16, year 2004 Output: 400 bpm (at 91% efficiency) Format: 500 ml PET water bottles Preforms: 8.5 gram preforms with 26/22 mm neck finish Includes: - chilling unit - preform dumper - feeder &...
2004 | 300038051 | SIPA
Stretch blow moulding machines. Blowing machine SIPA SFR8 from 2005 Capacity 16000 b/h Bottle size 0,25L...3L Molds 0,5L and 1L are included Chiller is included Neck type PCO 1810, 28mm The machine is dismantled and avilable immediately....
2005 | 300042255 | SIPA
Stretch blow moulding machines. Sipa SFL 43/ XL WM linear blow molding machine for jars Year of manufacture: 2015 With preform hopper and unscrambler 3 cavities and can be used for a wide range of jars Hardly used, very few hours In excellent condition and available immediatel...
2015 | 300042342 | SIPA
Stretch blow moulding machines. blower Sipa SF 12/8: - Format of the neck: 30/25 and 29/25 - Format of the bottle: 0,5L, 1,0L and 1,5L. - Working hours: 13.000h machine disconnected it includes a second Sipa machine for spare parts ...
2006 | 300041070 | SIPA
Stretch blow moulding machines. Stretch blow molding machine SMF HS 3000 2 cavities total production december 2021 : around 5 milions of bottles Production: 1,0lt > 2.500 bph - 2,5lt > 1700 bph machine installed and in working condition ...
2011 | 300043669 | SMF
Stretch blow moulding machines. Blow molding machine SMF Combi 400 Neck: 30/23 Formats: 1.5 lt it includes: - bottles uncramble SMF SB 10.000 - chiller HT 6A machine stopped but it is possible to be tested running ...
2009 | 300046164 | SMF
Stretch blow moulding machines. Blower SMF STRATOS 10E from 2016 for 3-10L bottles Includes: 1. SMF STRATOS 10E blower with a set of molds for one format 2. Preform feeder 3. Bottle receiver 4. Power Wizard - automatic temperature control system 5. Air recuperation system 6. Pref...
2016 | 300046349 | SMF
Stretch blow moulding machines. Used Stretch blow moulding machine Brand: SMI Model: SR 10 Year: 2010 Neck: 28mm for still and sparkling water Production: 15.000 bph machine installed but not in working condition since december 2022...
2010 | 300045138 | SMI
Stretch blow moulding machines. Used stretch blow molding machine for big bottles Brand: SMI Model: SR 4 HC Year: 2006 Production rate: 29/21 3.900 bph 48 2.900 bph Mold available after a negotiation formats 1lt and 5lt Neck formats: 48mm and 29/21 (at extra price) Working...
2006 | 300046424 | SMI
Stretch blow moulding machines. Straight Line Blow Molding Machine. 80% New. Machine was built on end of 2018. Fully functional. The rotary blow molding machine is a combination of the latest German technology with our superior design and manufacturing capacity. This machine co...
2018 | 300042177 | STRAIGHT LINE BLOW MOLDER
Stretch blow moulding machines. Terekas Flex Blow 4- 2016 6,000 B/H 28m neck PCO 1810 4 cavaties Blowing 2 liter container at the moment 2 sets of molds for 1l and 2l Includes: Hopper, feeder For an extra cost- complete line with conveyoring and bottle palletizer Can't be seen i...
2016 | 300038310 | TEREKAS
Stretch blow moulding machines. Terekas- FB2-3 PET Reheat - 2020 Cavities- 1-3 Output- 3,400 bottles per hour Preferential heating Includes: -Preform dumper – Preform hopper elevator – Preform feed rails – Change parts for 24 mm 410 and 28 mm 410 neck finishes – Airveyor ta...
2020 | 300044160 | TEREKAS
Syrup Room. Powder Dissolving Unit & Concentrate Discharge Station Möstl - Dissolving tank, 2.000 l complete with agitator 1,1kW, pressure transmitter, CIP sprayball - Hopper for powder; Hopper for oils and aromas - Triblender Rotor-Stator powder dissolver 5,5...
2018 | 300043835 | MÖSTL
Unscrambler. Lanfranchi RMX 12 unscrambler from 2000 With empty bottle conveyor belt inlet Separate switch board In front vertical hopper and bottle flat conveyor PLC: Siemens S7 There are following in the set with unscrambler: air conveyer outlet, 3 bottles f...
2000 | 300030572 | LANFRANCHI
Vinegar filling lines. Used Monobloc for filling Vinegar Brand: Fimer Model: SRT/24-36-6 PKV Year: 2014 Production: 10.000 bph Neck: Vingar Snap On Anticlockwise Pitch: between 55 to 110mm Capper: Arol Kamma PKV Product: the machine can fill only Vinegar or sunflower o...
2014 | 300046557 | FIMER
Washing-rinsing machine. Sentry Racetrack Rinser-2013 Gripper style rinser Water or air rinser 60 bph All stainless steel construction It ran both single serve bottles and gallon jugs Still set up but cannot be seen running Operator Friendly Lateral Adjustment fo...
2013 | 300045351 | SENTRY
Washing machine for glass bottles. Cleaning machine for glass bottles GM Gera Construction year 2010 For 1 L glass bottles (but can be adapted to other sizes) - Operating hours: 32767 (as of 26.03.2024) Bottle dispensing & bottle feeding Label discharge Hot water supply / control ...
2010 | 300046771 | ARCADE GM GERA
Washing machine for glass bottles. Washing machine for Glass bottles . Bardi Bottle washer, Model NILO2S Year 1998 · Production 9000 bph · Formats: 0.25, 0.33, 0.75, 1L , · Bottle diameter: From Ö 55 (H=195) to Ö 90 (H=335) · Working...
1998 | 300044162 | BARDI
Washing machine for glass bottles. Bardi NVA washing machine for glass bottles, year 1995 Output: from 950 to 2800 bph Includes: 8-row Bardi washer and gas boiler with injection pump Compressor Water softener Blowing machine adapted for small formats (33cl) and juice bottles Manu...
1995 | 300045737 | BARDI
Washing machine for glass bottles. Bottle rinser GRONEMEYER from 2012 Glass bottles. Capacity: 20.000 b/h Idle since 2019 Dismantled and stored and available immediately! ...
2012 | 300046006 | GRONEMEYER
Washing machine for glass bottles. Reeve-X-V Glass bottle air cleaner It receives bottles spins around blows air into the bottle and has a vacuum attachment to suck out whatever was blown out of the bottle 3000 bottles per hour Available immediately! ...
| 300043230 | REEVES
Wines and spirits end packing line. Bertolaso still wine bottling line, year 1980 Capacity: 3000 bottles / hour Sizes: 25cl, 50cl, 75cl, 100cl Includes: - Accumulation table at the entrance of the line - Cobert / Bertolaso Olympia 16 spouts filler, year 1980 - Bertolaso Super Glori...
1980 | 300045410 | BERTOLASO
Wines and spirits end packing line. CLIFOM monobloc for glass bottles from 1998 Size: 0,75L Product: wine Capacity: 6000 bph Filler for 28 valves Cork cap for wine The machine is in production, in good condition and available immediately! ...
1998 | 300041206 | CLIFOM
Wines and spirits end packing line. Rinser CLIFOM for glass bottles from 1998 Size: 0.75L Capacity 6000 bph 28 valves The machine is in production and available immediately! ...
1998 | 300041204 | CLIFOM
Wines and spirits end packing line. Filler for still wine Brand: GAI Model: 12.1R Production: 2000 bph Year: 2002 Cap: Cork cap Machine stopped in stored in the warehouse ...
2002 | 300045680 | GAI
Wines and spirits end packing line. Complete filling line KRONES capacity 7.000 bph Bottle formats: 330, 500, 700, 750, 900, 1000 ml The line was working with cider, sparkling wine and champagne Posibility of bottling beer in returnable/non-returnable bottle The line includes: 1. ...
1988 | 300046260 | KRONES
Wines and spirits end packing line. Filler for still wine Brand: MBF Model: Synchrofill 20.20.4R Production: 4000 bph Year: 1999 Cap: Cork cap Machine stopped in stored in the warehouse ...
1999 | 300045681 | MBF
Wines and spirits end packing line. Gravity filler for non carbonated wines Production: 7000 bph Can fill only still wines The machine had been well maintained during all the years in operation and is currently in working condition ...
2001 | 300046518 | MBF
Wines and spirits filling lines. Complete filling line for sparkling wine in glass bottles Caps: Cork and Crown Production: 600-1200 bph Bottles: Borgunder, Bordelese, Champagne Format: from 0,375Lt to 1,00lt The line includes the following machines: Rinser: Steril Water Fille...
2003 | 300043208 | BERTANI
Wrap Around case packers. Apsol TL case packer with DFM lane divider, year 2017 Output: 25.000 bph Cartons acceptance rate: Min: 300x200x150 H mm / Max: 600x400x400 H mm It picks up bottles, cans, jars, bricks from an infeed conveyor and packs them into American cartons o...
2017 | 300043748 | APSOL
Wrap Around case packers. Wrap-around cartoning machine Atlanta Giotto, year 2015 Output: 25 packages/minute In-line feeding: 4 channels Packaging: Wrap-around or Tray Bottles: PET or glass Magazine capacity: 300 It has never been used Available immediately! ...
2015 | 300046353 | ATLANTA
Wrap Around case packers. Used wrap around case packer - Pick and Place Packer Cermex E478 - Case Erector Carmex F387.40 Speed 40 c/min - Automatic Cse Gluer Cermex C6 Machine dismantled and available immediately! ...
2008 | 300046079 | CERMEX
Wrap Around case packers. Listed as “Douglas Sleever”- 1999 Used Davis cartoner- wrap around cartoner Model: 4-6 ct In excellent condition and very versatille, immediately available! ...
2000 | 300043533 | DAVIS ENGINEERING LLC
Wrap Around case packers. Used Wrap Around Case Packer for secondary packaging Brand: Ocme Model: VEGA HT 40F Year: 2013 Formats: 33cl bottles the secondary packaging is 4 x (6x33cl) with a bottom carton pad dimensioned 393mm x 261mm 50cl bottles the secondary packaging is...
2013 | 300045709 | OCME
Air Compressors (High Pressure). Used compressor ABC (made in Spain) Model: 3HA-4-TER-LT Power: 270 Kw Dryer and Air Tank included Chiller not included This machine has only been used for testing blow molding machines. The manufacturer has maintained the machine. The machine has be...
2012 | 300046556 | ABC
Air Compressors (High Pressure). Used compressor ABC (made in Spain) Model: 3HA-4-TER-LT Power: 270 Kw Dryer and Air Tank included Chiller not included This machine has only been used for testing blow molding machines. The machine has been dismantled and it is not possible to be in...
2012 | 300046614 | ABC
Air Compressors (High Pressure). Atelier François CE46B compressor, year 2012 Hours worked: 60.000 Includes dryer. In production...
2012 | 300045564 | ATELIER FRANÇOIS
Air Compressors (High Pressure). Atelier François CE46B compressor, year 2006 Hours worked: 90.000 Includes dryer. In production...
2006 | 300045565 | ATELIER FRANÇOIS
Air Compressors (High Pressure). CompAir High Pressure Air Compressor 5280 D Air and Gas Compressor Hrs run : 19,534 Hrs They are offering with it an idetical one that has been canabalized for spare parts. ...
1996 | 300040594 | COMPAIR
Air Compressors (High Pressure). Siad Tempo 2350 compressor ...
2005 | 300039215 | SIAD
Air Compressors (High Pressure). Siad Tempo 1850 compressor (2 units available)...
2005 | 300039214 | SIAD
Air Compressors (High Pressure). Used Siad Tempo 1500 No inverter included Machine dismantled and stored in the warehouse ...
2012 | 300045930 | SIAD
Air Compressors (High Pressure). Used Siad Tempo 1500 No inverter included Motor short circuited and the machine generally in bad conditions Machine dismantled and stored in the warehouse ...
2007 | 300045932 | SIAD
Air Compressors (High Pressure). Used Siad Tempo 1500 No inverter included Working hours: 27.000 Latest maitenance at 25.000 working hours Machine dismantled in 2021 Machine dismantled and stored in the warehouse ...
2004 | 300045973 | SIAD
Beer filling. Bottle filler and cork capper DELTA SVF 120/24 KK For filling glass bottles Filling of beer, CSD drinks and also soft drinks Bottles 0.33L long neck and 0,5 L No own electrical cabinets available Construction year 1991 ...
1991 | 300046241 | KHS
Bottle inspector. KRONES Linatronic glass bottle inspector from 2004 Capacity: 40.000 bottles / h Machine only worked in single shift operation Furnished with 3 pneumatic pusher Can check 23 diverse bottle sizes HF and IR base monitoring, Thread, bottom, neck fin...
2004 | 300039077 | KRONES
Cans filler and capper. Sympack - Mastercan can filling line 9 valves Filler and sealer Fills beer and carbonated drinks Formats: 0,5l - 3.000 c/h 0,33 - 3.500 c/h Seamer is a B 60 l Bonicomm currently running Crown Cork and Seal 12 &16 oz/355 mm & 473...
2005 | 300043785 | SYMPAK
Complete Can filling lines. Complete canning line Products: Carbonated Soft Drinks Production: 35.000 cph or 12.000 liters per hour Formats: 330/222 sleek Lid 202 Packaging: 4x6 Working Hours: 28800 working hours The line includes the following machines: 1. CAN dep...
2002 | 300045805 | SIDEL
Complete Can filling lines. Sidel Starcans can filling line Machines included: Filler: • Brand: Simonazzi • Model: Star Cans 80/60R (80 filling nozzles) • Capacity: 68,000 cans/hour • Formats: 0.33L standard and 0.25L Slim • Year: 1992 Seamer: • Brand: Angelus • Model: 12...
1992 | 300046221 | SIMONAZZI
Complete filling line for fountain water (19 L). Complete Bardi filling line for still water from 2007 Bottle type (basic): from 10L to 19L volume PET closing type: PP Non screw cap Pallet: Euro-type Line capacity - 450 bottles/h The capacity is calculated on the basis of a 19L PET bottle The...
2007 | 300041365 | BARDI
Complete filling lines for carbonated drinks. Fogg carbonated drinks filling line Includes: Fogg FC-16/24/37 filler for carbonated products,24v filler, 16 head rinser, 3 head capper -Set up for 28mm bottle finish running an 1810 cap finish AXON sleave labeler and AXON tamper sleeve applicat...
2017 | 300046141 | FOGG FILLER
Complete filling lines for carbonated drinks. Filling line for still and carbonated water, soft drinks and beer PET bottles from 2008 Capacity 6000 bph Bottle formats: 0,33L 0,5L (two bottle designs) 1L 1,5L 2L (two bottle designs) Cap formats: PCO 1881 (Original and Sport) Includes: 1. Pa...
2008 | 300045883 | LINKER
Complete filling lines for carbonated drinks. Products: mineral water and carbonated drinks Bottle type (basic): from 0.5 l to 2.0 l volume PET closing type: PP screw-cap PCO 1810 Labels: plastic - RollFed Package format: 3x2, wrapped in heat shrink film Tray: Euro-type Line capacity – 12...
2004 | 300045355 | NATE
Complete filling lines for carbonated drinks. Products: mineral water and carbonated drinks Bottle type (basic): from 0.5 l to 2.0 l volume PET closing type: PP screw-cap PCO 1810 Labels: plastic - Roll Fed Package format: 3x2, wrapped in heat shrink film Tray: Euro-type Line capacity – 12...
2005 | 300045352 | SIMONAZZI
Complete glass filling lines. CFT Mater Tronic 50/60/10- year 2009 Rinser 50 heads, 60 head filler, 10 head capper Filled beer 12 oz glass bottle, built for metal caps. Can fill 7 oz, 12 oz and 25 oz The capper will use standard 26mm size caps. Pitch 113 Runs counterclo...
2009 | 300044356 | CFT
Complete glass filling lines. Complete KHS glass filling line Construcion year 1991 Filling of beer, CSD drinks and also soft drinks Bottles 0.33L long neck and 0,5 L The line includes: De-palletising and palletising line Decorker Rink KG (year 1991) KM-670/3K Bottle unpack...
1991 | 300042269 | KHS
Complete glass filling lines. Complete filling line for glass and PET Formats: PET 0.33l, 0.50l, 1.00l, 1.20l, 1.50l GLASS 0.33l, 0.50l, 1.00l 0.33l crown cork approx. 150P. at 40 module crates at 24 bottles 0,50l Euro screw cap approx. 150P. at 40 module crates at 20 bott...
1996 | 300046121 | KOSME, KRONES
Complete Non-carbonated Aseptic Filling Line for drinks. Complete non-carbonated products PET filling line from 2001 Product: flavoured water Output: 12.000 bph 1,5lt Bottles: 0,5L , 1,5L PET Bottle Closures: 28 PCO 1810 Labels: Plastic roll fed wrap around Packing: 3 x 4 and 3x2 Palletizing: Europ...
2000 | 300043064 | KHS
Complete Non-carbonated Aseptic Filling Line for drinks. Products: non carbonated drinks Bottle type (basic): from 0.5 l to 2.0 l volume PET closing type: PP screw-cap 38mm Labels: Plastic Sleeve Package format: 3x2, wrapped in heat shrink film Tray: Euro-type Line capacity – 12.000 bottles/h The capa...
2004 | 300045353 | NATE
Conveyor. AmbaFlex Spiralveyor SV accumulating conveyor, year 2013 Output : 50 packs/min It ran on a 1L brick line, but it can also be used for bottle packs Entry height : 750 mm Exit height : 4000 mm Available immediately! ...
2013 | 300045670 | AMBAFLEX
Conveyor. AmbaFlex SV-400-1300 spiral conveyor, year 2004 Output: 60 packs/min It ran on a 1L HDPE bottle line, and it can also be used for brick packs Infeed height : 730 mm Outfeed height : 3300 mm Available immediatley! ...
2004 | 300045671 | AMBAFLEX
Glass bottles filler for W&SD. Monobloc for glass filling of beer or sparkling products Brand: OH (KHS) Model: B84/12 KK-96 Year: 1995 Production rate: 32.000 bph Cap: crown Formats (ml): 250 - 330 - 500 Machine available in March 2024 ...
1995 | 300045978 | KHS
Glass bottles filler for W&SD. Krones glass bottle filler for beer from 1995 Outout: 13.200 bph Volume: 355ml and 650ml Including: Kronos 50 head rotary bottle washer Krones 40 head rotary filler VCF 401 OKK40, 10 head rotary Capper Crowner Krones12 head rotary Supermatic Fro...
1995 | 300041162 | KRONES
Injection moulding machine for food and beverages caps. Injection Molding Machine for closures Husky H160 RS 55/50 from 2010 Offer includes Hopper and Dosing Unit by Movacolor Working Hours less than 1000 Machine like new Dismantled and available immediately! ...
2010 | 300039085 | HUSKY
Injection moulding machine for food and beverages caps. Injection Molding Machine for closures Husky H160 RS 55/50 from 2010 Offer includes Hopper and Dosing Unit by Movacolor from 2010 Working Hours approximately 400 Machine rarely used. Perfect Condition. Like New Not possible to see...
2010 | 300039088 | HUSKY
Injection moulding machine for food and beverages caps. HUSKY Injection moulding system for closures H800 RS115/100 from 2011 For caps 2,90g. PCO1810 with a contract cycle of 6.5 seconds The line is included: - Hot channel controller for mold - CapCooler, storage bin, orientator - Intravis video ins...
2011 | 300042076 | HUSKY
Injection moulding machine for food and beverages caps. Injection Molding Machine Husky H160 RS 55/50 from 2010 Offer includes Hopper and Dosing Unit by Movacolor Working Hours about 400 Machine hardly used and in excellent condition Machines not possible to be shown working as no power at plant ...
2010 | 300039089 | HUSKY
Injection moulding machine for food and beverages caps. Complete line Husky G400 GEN-RS85/70 from 2001 The machine currently works with moulds 64 and 72 cavities 2,35/2,6/2,9 gr, PCO1881/1810 Moulds are NOT included The line is in production and available immediately! ...
2001 | 300044207 | HUSKY
Injection moulding machine for food and beverages caps. Husky injection molding machine for closures Model: Hycap 225 from year 2015 Includes Husky 48 cavity mold 29/25, weight 1.25g Output: 1.5 million closures/day Working hours: 31.000 Available immediately! ...
2015 | 300045736 | HUSKY
Injection moulding machine for food and beverages caps. Complete system Husky HPET HPETL AE 230E RS 95D/95 Construction year 2016 Includes: - Dryer system - Dry air curtain unit - Hot runner 32-cavities - T-conveyor belt - 2 x vibration table - Mezzanine In very good condition and wellmantaine...
2015 | 300045764 | HUSKY
Injection moulding machine for food and beverages caps. Used injection molding machine for caps and closures Brand: Netstal Model: Elion 1750-840 PM Year: 2013 Working Hours: 20.000 (20.11.2023) Used it with a mold 24 cavities Dryer: Piovan RPA2400 2013 Chiller: Piovan CA1173HT 2013 Cap Quality control...
2013 | 300046423 | NETSTAL
Injection moulding machine for PET preforms. Demark injection moulding machine for preforms Included 12 cavity TPS mould of 42 gr Working hours 80.000 Clamping force: 280 T Clamping stroke: 545 mm Max/Min thickness of mould: 280-700 mm Screw diameter: 82 mm Max Shot weight in(PS): 2040 gr M...
2011 | 300046414 | DEMARK
Injection moulding machine for PET preforms. GREENBOX chillers - 2 units Both used for HUSKY GLINE300 Chiller №1. GreenBox Multi 40/HP Cooling capacity - 140.000 Kcal/h Compressor power - 4 x 8.9 kW Rated power - 85.5 kW Tank capacity - 850 liters Dimensions - LxWxH - 4,3x1,65x2.20 meters C...
| 300044205 | GREEN BOX
Injection moulding machine for PET preforms. Husky injection molding machine for preforms from 2003 GL 300 PET - P100/120 E140 Offer includes: Cooling Robot by Cool Jet Model FSI200GL300 MB Conveyor Dehumidifier for PET granulate type DR224HT with a 7000-litre tank and a dedicated pump ...
2003 | 300042987 | HUSKY
Injection moulding machine for PET preforms. Complete system of Husky GL300 PET P100/110 E120 injection moulding machine for preforms - Resin Dryer, Plastic systems DR222HT - Hopper : Plastic System H4500 - Mould Dehumidifier Munters ML1100E - Chiller, NOT Included - Conveyors : MB Conveyors...
2000 | 300044185 | HUSKY
Injection moulding machine for PET preforms. Injection molding system for production of PET preforms HUSKY GL300PET P100/120 E100, year 2002 - Injection Unit: P100/120 E120 - Clamping Unit: GL300PET - Dryer - Moulds for 40, 46, 48 gramms - Chiller The machine is immediately available In ...
1998 | 300045833 | HUSKY
Injection moulding machine for PET preforms. Complete system Husky HPET HPETL 230E RSE80D-80 Construction year 2014 Includes the following: - Dryer system 3000 Kg Plastic Systems - Dry air curtain unit - Hot runner 32-cavities - T-conveyor belt - 2x vibration table Working hours : 50...
2014 | 300046178 | HUSKY
Injection moulding machine for PET preforms. Complete system Husky HyPET 120 P 85/95E85 Construction year 2008 Working hours : 80.000 Includes the following: PIOVAN Chiller PIOVAN dryer RPA 1800 PIOVAN Hopper Including cold half and hot runner HUSKY Molds - HUSKY PCO 1810 - 34 gr 30/25 - ...
2008 | 300046194 | HUSKY
Injection moulding machine for PET preforms. Complete system Husky HyPET 300 P100/110E120 Construction year 2009 Working hours: 93.000 Includes the following : PIOVAN Chiller PIOVAN dryer RPA 1800 PIOVAN Hopper Including cold half and hot runner HUSKY Molds - HUSKY PCO 1881 - 26,76 and 24,...
2009 | 300046206 | HUSKY
Injection moulding machine for PET preforms. Krauss Maffei 450-4500 CS PET for Preforms Year 2010 Includes: - Mold: 27g x 48 cavities, 38mm neck, Height 70 mm - Robot Available immediately!...
2010 | 300043434 | KRAUSS MAFFEI
Injection moulding machine for PET preforms. Injection moulding machine MIR 280-2-520, year 2003 Two extruder type For preforms type OIL, 29 NECK, 28-30 grams Included: Robot GEFIT Eurochiller EF C180 PET, three input water, inner circulation Dryer PET Plastic Systems DR 106 HT/H 1500 PET H...
2003 | 300044766 | MIR
Injection moulding machine for PET preforms. Used Netstal injection molding machine PET 3500-3550-R Year: 2004 Resin Dryer: Piovan DP 627 Hopper: Piovan 4.6 tons Mold Dehumidifier: Blow Air MSP 50 C/4 (centralized for 3 machines) Mold: complete mold 48 cavities 18 gr neck PCO 1810 H...
2004 | 300042798 | NETSTAL
Injection moulding machine for PET preforms. Used Netstal injection molding machine PET 3500-3550-R Year: 2004 Resin Dryer: Piovan DP 627 Hopper: Piovan 4.6 tons Mold Dehumidifier: Blow Air MSP 50 C/4 (centralized for 3 machines) Mold: complete mold 72 cavities Hot Runner made by MH...
2004 | 300042800 | NETSTAL
Injection moulding machine for PET preforms. Used Netstal injection molding machine SynErgy 2400-2550 Year: 2005 Resin Dryer: Piovan GP35 - Year 2005 Hopper: Piovan DSN523HE - Year 2005 Mold Dehumidifier: Eisbar Soft Drop: NOT Included Dosing Unit: NOT Included Color Mixer: NOT Included Mo...
2005 | 300044240 | NETSTAL
Injection moulding machine for PET preforms. Complete system for preforms Netstal PET-LINE 2000-3700 from 2011 Includes: - PET Injection system Netstal PET 2000-3700 R - 60 cavity injection mould Otto Hofstetter AG (26.5 gr and 28 gr) - Dryer Piovan 560 kg/h - Air dehumidifier RPA 1200, 1200...
2011 | 300046199 | NETSTAL
Injection moulding machine for PET preforms. Complete system of NIssei ASB PM 70/65 NII injection moulding machine for preforms Includes the following: 1. PM 75 / 65 NII - ASB Machine 2. Dehumidifier Air Dryer With 1 ton Capacity Hopper ( Conair ) W - 400 3. Mould Sweat Protector ( Conair )...
2014 | 300045910 | NISSEI ASB
Injection stretch blow moulding machines for PET bottles. Injection Stretch blow moulding machine Aoki AL-250-50S The machine is almost brand new. It was produced in 2021 February and installed in 2021 July The machine includes : - AL-250-50S ISBM machine - Wittmann Dry MAX E60 PET dryer (2013) The m...
2021 | 300044686 | AOKI
Injection stretch blow moulding machines for PET bottles. Used Nissei ASB PF3-1BH V2 NO Molds available Dryer and plastic dehumidifier - Plastic System included Working hours 116.000 Machine in working condition Maximum volume of the bottle is 6liters ...
2001 | 300038712 | NISSEI ASB
Injection stretch blow moulding machines for PET bottles. Nissei ASB PF4-1B Auxiliaries included: Piovan Dehumidifying resin dryer and hopper Mould for 2 liter Snap-on 36mm bottle 70g In production and available inmediatly...
1997 | 300043728 | NISSEI ASB
Injection stretch blow moulding machines for PET bottles. Injection Blow Moulding Machine NISSEI ASB 50MB V3 from 2003 Offer not include any auxiliries Offer does not include mould Working hours: 20085. Documentation available in English. Machine in perfect working condition and available immediately...
2003 | 300044219 | NISSEI ASB
Injection stretch blow moulding machines for PET bottles. Injection Blow Moulding Machine NISSEI ASB 50MB V3 from 2005 Working hours: 63863 Documentation avaiable in English. Offer not include any auxiliries Offer does not include mould Machine in perfect working condition and available immediately...
2005 | 300044220 | NISSEI ASB
Injection stretch blow moulding machines for PET bottles. Nissei ASB PF8-4B V3 Working hours: 20.000 aprox since refurbishment in 2016 Refurbishment: updated to version 3 in software, preforms transfer Auxiliaries included: Piovan Dehumidifying resin dryer and support structure Machine in production ...
2002 | 300044376 | NISSEI ASB
Injection stretch blow moulding machines for PET bottles. Nissei ASB 70 DPH v2 complete system from 2005 With Piovan dryer Molds available for 63mm and ROPP Machine in production...
2005 | 300044574 | NISSEI ASB
Injection stretch blow moulding machines for PET bottles. Used Nissei ASB 70 DPH V3 Year of manufacture 2006 Mold 44g, neck 80mm Can be seen running and available immediately! ...
2006 | 300045411 | NISSEI ASB
Injection stretch blow moulding machines for PET bottles. Used injection molding machine Nissei ASB 50 H Dryer: included Fenco Hopper: Included Piovan No mold available Working hours 144.000 machine has been stopped in April 2023 ...
1998 | 300045428 | NISSEI ASB
Injection stretch blow moulding machines for PET bottles. Used Nissei PF6 from year 2014 Offer includes: Machine with vibration pads Chiller 10TR with high pressure Grundfos pump Motan dehumidifier dryer, with 450L aluminium alloy bin Color doser, make Conair with Housing One complete mold set: 46mm A...
2014 | 300045662 | NISSEI ASB
Injection stretch blow moulding machines for PET bottles. Nissei PF6 2B from year 2009 Includes dehumidifier and dryer hopper Chiller 10TR capacity Includes 2 Agro chemical molds Worked hours approx 100.000 In good condition, available immediately and can be seen in production! ...
2009 | 300045827 | NISSEI ASB
Injection stretch blow moulding machines for PET bottles. Injection Blow Moulding Machine NISSEI ASB 50MB V3 from 2007 Offer include Dryer and loader L&T Offer does not include mould Working Hours : 54500 (August 2021) Machine in perfect working condition and available immediately...
2006 | 300043257 | NISSEI ASB
Injection stretch blow moulding machines for PET bottles. Nissei ASB 70DPH 63mm neck size by 6 cavities. It is producing 4 oz jar, 6 per cycle, 17.42 seconds It is basically brand new because we refurbished the entire machine. It has new valves, new reduction gears, new motors, a new computer system, ...
2006 | 300046175 | NISSEI ASB
Injection stretch blow moulding machines for PET bottles. Nissei ASB 70 DPH V4 stretch injection blow moulding machine With zero cooling Included: Resin dryer and chiller Almost brand new machine, only with test run! ...
2021 | 300046214 | NISSEI ASB
Injection stretch blow moulding machines for PET bottles. SIPA Blow moulder type ECS 10000 construction year 1997 Molds - 2 (10 cavity blowing mold for 250ml CSD) ; 2 (10 cavity blowing mold to 290ml water) Neck 28 mm type 1810 The machine includes Injection Blow molding machine Resin Dryer Resin Hopper...
1997 | 300038882 | SIPA
Labelling machine for glass bottles. Labeller Krones Prontomatic from 2000 Capacity : 30,000 bph Paper Label Machine dismantled but in good condition! ...
2000 | 300041052 | KRONES
Labelling machine for glass bottles. Labelling machine for glass bottles KRONIMPLANTI from 1992 Type of bottles: 0,75L (champagne, vine) Capacity 3000 b/h For front, back and neck label Machine is in good condition, can be inspected in dry cycle and available immediately! ...
1992 | 300041561 | KRONIMPLANTI
Labelling machine for glass bottles. Makro MAK-02 8P UA4 L4 CE 4-station adhesive labeller, year 2017 Output: 6,000 b/h Anticlockwise Carousel diameter: 780 mm Machine pitch: 306.15 mm Includes: - 4 module slots - 4 fixed MAK-AS adhesive carriages (65 m/min) Bottle diameter (min/m...
2017 | 300046057 | MAKRO
Liquid detergents filling lines. GzBenpack automatic filler for liquid or semi-liquid soap, year 2016 Capacity: 800 bottles/hour Sizes: from 150ml to 2L 4 heads, gear pump Includes: - Stainless steel tanks from 120 to 150L - 4 adjustable nozzles - Pumps - Rotation table - El...
2016 | 300046105 | GZBENPACK
Monobloc rinser filler capper. Rinsing, filling and capping monoblock SACMI from 2010 Model ALL-MAS 40/40/10 (Pitch 113 mm) Capacity: 20.000 bph on 50 ml PET Cylindrical bottle format Machine is suitable for filling non carbonated drinks, no contact filling execution. 40 grips ...
2010 | 300045980 | SACMI
Monobloc rinser filler capper. Monobloc SBC Master RS 32/32/8 from 2007 for PET Capacity 6000 bph for bottles 1,5L and 9000 bph for bottles 0,5L PCO 1810 and 1881 The machine works with CDS drinks (sparkling water, energy drinks, soda) and still water. Rinser heads 32, fille...
2007 | 300042470 | SBC
Mould and die cleaning equipment. Pisko PC96 PET preform neck crystallizer machine, year 2014 Output: 12 000 preforms/hour Working hours: 27000 hours Configuration: PCO 1810 neck finish Includes following auxiliaries: - Preform Feeding System - Unscrambler - Temperature Control...
2014 | 300040281 | PISKO
Moulds for Closures. Used mold KTW for closures Number of cavities: 16 Format: 29/21 Oil cap Number of shots: 721.147 cyclce time: 9,4 sec materila LDPE Available immediately! ...
2011 | 300041040 | KTW
Moulds for Closures. Complete mould for caps and closures Cavities: 72 Type of closure PCO 1810 Hot runner PSG is dismantled, it was cleaned by Messburgger PSG. Cold Half KTW Number of shots: 1.169.221 it is not possible to be tested because the seller doesn't has ...
2006 | 300041039 | KTW
Other Machines for Drinks. Cylindrical tanks with agitator Construction year 1997 To mix the lemonade and fruit syrup adding sugar Dimensions: H = 3.250mm W = 1.155mm L = 1.405mm (diameter) Height with frame: 3.250mm Height tank alone: 2.000 without motor / 2.470mm with mo...
1997 | 300045623 |
Other Machines for Drinks. Cylindrical tank with agitator Construction year 1997 To mix the lemonade and fruit syrup adding sugar Dimensions: H = 3.525mm W = 1.355mm L = 1.420mm with drain pipe milk thread DN40 Height With rack: 3.525mm Height tank alone: 2....
1997 | 300045624 |
Other Machines for Drinks. Cylinder conic tank Apparatebau Nordhausen Manufacturing year: 1998/2000 Tank type: Vertical CCT, outside type Tank volume: 1 000 HL Number of cooling zones: 3 zones...
2000 | 300045831 | APPARATEBAU NORDHAUSEN
Other Machines for Drinks. Bucher Vaslin Flavy FX3 ICS cross-flow filter for still and sparkling wines, year 2017 3 modules Filtration surface: 36 m2. Flow rate: up to 10 hl/h Features: . respect of the wine organoleptic quality . minimal wine losses thanks to the "push...
2017 | 300046128 | BUCHER
Other Machines for Drinks. Used Erca PET cup form seal machine from 2007 Model EF320L Hours worked approx. 30.000 Includes AF Packer Was filling still water Formats 100, 125, 200, 250 ml Output 18.000 cups/hour at 100 and 125 ml 14.400 cups / hour at 200 and 250 ml 24, 3...
2007 | 300043810 | ERCA
Other Machines for Drinks. Filter system for wine/cider from VELA Dismanled and stored in heated warehouse. ...
2002 | 300040985 | VELA S.P.A.
Packing machine for cans. Graphic Packaging International: Multi Pack Cartoner: QuikFlex 2100 (refurb) Iincluded: QuikFlex Turner Divider Year Built: 2016 “Fully-Enclosed”, pre-glued paperboard sleeve-style carriers with overlapping end-flaps, hot-melt closed Reason fo...
2016 | 300045404 | GRAPHIC PACKAGING INTERNATIONAL
Pallet wrapper. France Feuillard FF66 strapping machine Year of manufacture: 2009 Formats: 0.5, 1L Available immediately! ...
2009 | 300045673 | FRANCE FEUILLARD
Pallet wrapper. France Feuillard FF66 strapping machine Year 2004 Machine is already disconnected and available immediately! ...
2004 | 300045672 | FRANCE FEUILLARD
Pallet wrapper. Complete packing line for pallets incl. wrapper HALOILA Octopus 1825B Construction year 2017 Including loading of pallets, conveyos Format : Euro pallets 1200x800 and industrial pallets 1200x1200 1 pallet / minute Wrapping time : aprox. 65 seco...
2017 | 300046478 | HALOILA
Pallet wrapper. MSK 280I stretch hooding machine, year 2004 Products: Briks and milk bottles PE film: 80 to 140 µm Existing customer PE sleeve: 1360 X ( 450 x 2 ) 90 µm 950 X ( 370 x 2 ) 80 µm 1360 X ( 560 x 2 ) 120 µm Heat source : Natural gas with a pressure ...
2004 | 300045675 | MSK
Pallet wrapper. MSK 280I stretch hooding machine, year 1999 Products: Briks and milk bottles PE film: 80 to 140 µm Existing customer PE sleeve : 1360 X ( 450 x 2 ) 90 µm 950 X ( 370 x 2 ) 80 µm 1360 X ( 560 x 2 ) 120 µm Heat source : Natural gas with a pressure...
1999 | 300045674 | MSK
Pallet wrapper. VARIABLE PRE-STRETCH UP TO 400% MAXIMUM PRODUCT DIMENSION UP TO 1400X1400MM ...
2013 | 300043600 | ROBOPAC
Palletizer. Palletizer Acmi Model: RASAR P 135 2I Product : EuroPallet Capacity : 37 000 bph, 26 cases per minute. Lately machine was packing beverages in 250, 500ml cans in 24pc packs and 500ml bottled beers both in a tray of 20 and in a carton of 15. Mac...
2003 | 300042346 | ACMI
Pasteurizer for liquids. APV Gaulin Pasteurizer Products: Multivitamins, ICE Tea Brix 8/10 Capacity m3/h: 20.000 lt/h Inlet Temp: ca. 15 ÷23 oC Pasteurizer Temp : 85 - 110 oC; max. 120 oC Type of Pasteurizer: plate Holding time: 30 or 60 s Outlet Temp: depending on the...
2002 | 300045786 | APV GAULIN
Pasteurizer for liquids. Pasteurizer KHS KZE INNOPRO from 1998 Product pasteurized : soft drinks for aseptic filling as flavoured waters, iced teas, multivitamin drinks; it was used up to brix 10 the seller was using a mixed product (Syru...
1998 | 300045773 | KHS
PET Filler for W&SD. Procomac isobaric filler for water Model: Fillstar Pet 2 With capper AROL 140 filling valves 20 capping heads With 29/25 neck configuration With cap feeder From 2007 Running hours: 20.000h (October 2021) Available in February 2023 ...
2007 | 300043352 | PROCOMAC
PET Filler for W&SD. Sacmi volumetric filler with 70 valves from 2013 Can fill Hot fill and CSD products Can fill glass and PET bottles Fills from 250ml to 750ml Includes: ROPP 20 and Crowner 15 heads In dry storage and available immediately! ...
2013 | 300042308 | SACMI
PET labelling machine. Used Roll-Fed Labeller Krones Contiroll HS machine is clockwise the machine has been working with empty bottles but it can work with fill bottles too it is included the exit of the empty bottles The diameters according to the product are: 92.75 /...
2011 | 300042998 | KRONES
PET labelling machine. Used Labeller Krones Solomodul - 30 platterns - Pitch of the machine: 125,6 mm - Rotation: Clockwise - Dimensions of the roll: 225 +/- 1,2 mm - Ø 66,8 +/- 0,6mm - PLC: Siemens S7 300 - Formats: 1,5 - 0,50 -0,25 Machine dismantled in November ...
2008 | 300043405 | KRONES
PET labelling machine. Used labeller for pre-cut labels in paper Brand: Krones Model: Canmatic 720-18 Year: 2017 The machine was dismantled September 2022 ...
2017 | 300044556 | KRONES
PET labelling machine. Labelling machine PE FUTURA S 8T-540-1S 1E for PET bottles Year 2003 Capacity 10,000 un/h The machine can also apply labels to a square bottle Machine is diismantled and available immediately! ...
2003 | 300043349 | PE
Rotary compression moulding press. Rotary compression molding machine Sacmi CCM32MB from 2015 Complete Line with 32 cavity presse and SFM and PMV Capacity: 700 caps/minute Working hours: 10,000 hours The line is in production and can be inspected immediately! ...
2015 | 300039134 | SACMI
Rotary compression moulding press. Complete SACMI line for closures from 2009 For CSD PCO1881 Closures along with Molds & Tools for PCO1810 Offer includes: 2 x CCM 32 M working hours: 65,000 and 35,000 1 x FSM 12L working hours: 28,000 1 x PMV 224D working hours 57,000 CVS053B O...
2009 | 300042643 | SACMI
Rotary compression moulding press. Complete compression molding line for one piece closures Sacmi Product: PCO-1881, neck 28mm, 2.55 gr. Capacity 500 pcs/min. Working hours: 82000 h The line includes: · Sacmi Rotary press CCM003C (of year 2006) with slitting machine · Sacmi Fold...
2006 | 300042662 | SACMI
Rotary compression moulding press. Complete compression molding line for closures SACMI ССМ003А Product: PCO1881, neck 28mm, 2.5 gr and PCO1810, 28mm 2,8 gr. Capacity 500 pcs/min. Working hours: 74,500 The line includes: · Sacmi Rotary press CCM003C (of year 2007) · Sacmi Fol...
2007 | 300045690 | SACMI
Rotary compression moulding press. Sacmi Compression Molding Machine year 2012 Includes: - Molding Press CCM48SB - Mold 48 cav.1881(28 mm.) AB1881CSD4 2gr - Scoring Folder machine SFM12LB - Cap hopper Total Running Hours 15.000 Can be seen in production! ...
2012 | 300045782 | SACMI
Shrink Wrapper for PET bottles. Gramegna Shrink Tunnel from 2007 Model R700 Max. capacity 1200 packs/hour Width of welding jaw – 700 mm Max width of foil – 680 mm Max diameter of foil roll – 350 mm Max height of packaged product – 380 mm Dimensions of the tunnel entrance – W600 ...
2007 | 300045252 | GRAMEGNA
Shrink Wrapper for PET bottles. Prasmatic HSW 600 shrink wrapper, year 2006 Output : 55 packs/minute (19.200 bph) It worked with film and printed film Configuration: packs 2x3 & 2x4 Bottles: HDPE 0.5L & 1L In good condition and available immediately! ...
2006 | 300045669 | PRASMATIC
Shrink Wrapper for PET bottles. Two layers SMI SK 802 T from 1999 Can be inspected in dry cycle and availabe immediately! ...
1999 | 300039399 | SMI
Sleever for PET bottles. Shrink film SLEEVER - COMAG srl (Italy) TYPE ROTARY WITHOUT OVEN - it is working with steam 2 bars. MODEL ISLA 24 YEAR OF CONSTRUCTION 2007. WORKING HOURS 4.600 h. FORMATS a.PET 1500 ml/diameter 88 mm - speed 10.000 bph b.PET 500 ml/diameter 63...
2007 | 300039251 | COMAG
Stretch blow moulding machines. 2 cavities stretch blow molding machine Brand: 1Blow (old ADS) from France Model: 2XL SG Capacity: Max diameter 225mm Max height 405mm Max neck 53mm Preforms neck 20 to 53mm and includes 38mm kit Bottles 500ml 4000bhp Bottles 1.5 3000bph Bottles 5...
2021 | 300045163 | 1BLOW
Stretch blow moulding machines. Complete system for blowing bottles Kosme KSB 4000 Machine is dismantled since some time. Needs some refurbishment....
1996 | 300026176 | KOSME
Stretch blow moulding machines. Blow moulder Siapi EA2S/5 from year 2011 5 Cavities Volume of the bottle from 2lt to 20lt Mould included: 3 and 5lt Mold Pitch: 400mm Maximum bottle diameter: 320mm Maximum bottle height: 565mm Maximum neck diameter: 75mm Maximum Nominal output...
2011 | 300043232 | SIAPI
Stretch blow moulding machines. Side-TMS 1002e 2 Year 2009 - Machine is working - Technical handbook available Neck: 48mm for detergent and cosmetic bottles ...
2009 | 300046070 | SIDE
Stretch blow moulding machines. Used blow moulding machine Sidel Model: SBO 6/10 series 1 Year 1998 Neck: 28 BPF the PLC had been substitued recently Machine is stopped but it is possible to test it ...
1998 | 300044104 | SIDEL
Stretch blow moulding machines. Used blow moulding system SIDEL SBO 18 Series S2+ Construction year 2002 Includes Dehumidifier Hopper Feederer Control Panel Tipper Working Hours 119,466 Type of Neck 29/25 and PCO 1881 moulds not available All machine documentation av...
2002 | 300044565 | SIDEL
Stretch blow moulding machines. SIDEL BLOWING MACHINE SBO 10 Universal HR Year 2010 Mechanicall Speed 18000bph Preform Hot Fill 28mm (22.5 gr, 27.6 gr, 28gr) Auxiliary Equipment: - Dumper DP-2 2010 3.5 kW,P150 bar, CU500 - IPC 201 SIDEL Chiller 2010 Max Pressure 27 bar, Max...
2010 | 300043857 | SIDEL
Stretch blow moulding machines. Sidel SBO4 Compact from 2008 45,000 hours Not production and can't be seen running Very well maintained and can be inspected immediately! Compressor Belliss & Mocrom and chiller included...
2008 | 300045477 | SIDEL
Stretch blow moulding machines. Sidel SBO 8 Universal HR stretch blow moulding machine Suitable for hot fill products and CSD Included empty bottle packer and AF high pressure compressor and air conveyors Capacity: 11.500 bph for 300 ml CSD bottle 16 gr Working hours: 44.000 I...
2011 | 300046066 | SIDEL
Stretch blow moulding machines. Stretch Blow Moulding machine Sidel SBO 18 Series 2 Worked with edible oil but can work with CSD and still water too Hopper and preform loading system included Capacity 21.000 bph for 1 lt Can be shown in dry cycle working condition...
2005 | 300046155 | SIDEL