Used CHARPY, SPECTRO, LLOYD Charpy 300J - PIC-300; SPECTROTEST TXC25; LR150K PLUS of 2011 for sale

Tensometer CHARPY, SPECTRO, LLOYD, You can contact our team and analyze your needs so we can offer you the best possible solution depending on your budget.


Data Sheet of Used CHARPY, SPECTRO, LLOYD Charpy 300J - PIC-300; SPECTROTEST TXC25; LR150K PLUS

Ref. : 300043104

Year: 2011

Brand: CHARPY, SPECTRO, LLOYD

Status: For sale

Delivery time: Immediate



Technical Specifications:

Other Specifications:

LABORATORY EQUIPMENT (may be purchased separately)

A) Lloyd's LR150K PLUS Tensile Testing Machine 2011
B) SPECTROTEST TXC25 Mobile Spectrometer for Metal Analysis from SPECTRO 2011
C) Charpy 300J - PIC-300 impact pendulum purchased from Metrotec in 2011.

CHARACTERISTICS

A) Tensile machine:
Maximum force (tension and compression): 150 kN (33,721 lbf)
General force range using
Interchangeable load cells: 0.1 N - 150 kN (0.02 - 33,721 lbf)
Force measurement system: exceeds the requirements of BS EN ISO 7500-1: 1999 - Class 0.5 ASTM E4, DIN 1221
Force measurement accuracy: better than 0.5%.

Crosshead speed range at full load: 0.001 - 254 mm / min (0.0004 - 10 in / min)
Crosshead speed accuracy: ± 0.2% at steady state at 100 mm/min and above. Reduced at lower speed, but better than 1% at 0.5 mm / min.

Maximum working width between columns: 620 mm (24.4 in)
Crosshead vertical travel: 1050 mm (41.34 in.)
Crosshead position accuracy: <0.1 mm (<0.1 mm)

Internal extension resolution: <0.5 microns (<0.5 mm)

External extensometer connection.
(Using Lloyd Instruments interface connector): Analogue (± 10 V) or spot meter. Digital encoders (single or double differential).

Data output for computer / serial printer: RS 232

Supply voltage: 230 V a.c. ± 10% 50-60 Hz (fuse T5AH250 V)
115 V a.c. ± 10% ± 10% 50-60 Hz (fuse T10AH250V)
Power consumption: <1000 VA

Main frame dimensions
Height 2508 mm (98.74 inches)
Depth 733 mm (28.86 in.)
Width 1204 mm (47.4 inches)

Mass (without handles and load cell installed): 150 kg (330 lb)

Temperature
Operating: 40ºF to 95ºF (5 to 35ºC)
Storage: -4ºF to 130ºF (-20 to 55ºC)
Ventilation Requirements: Unrestricted air flow to side vents
Humidity: 5 to 85% RH (non-condensing)


B) Spectrometer:
Electrical connection: 100 - 240V, ±10%, 50/60Hz (acc. to DIN EN 61010-1)
Power during test process: 400 W
Power in stand-by mode: 100 W
Fuse protection - power supply line: 16 A (slow blow)

Storage conditions: -20 - 50ºC; -5 -120ºF
Temperature range: 5 - 40ºC; 40 -105ºF (according to DIN EN 61010-1)
Air humidity: max. 80% (acc. to DIN EN 61010-1)

Argon connection
Inlet pressure: 5 bar ±10%; 72 psi
Quality: ≥ 4.8 (99.998%)

Consumption - standard probe:
Constant flow: 15 l/h
Analytical flow: 120 l/h
Flushing (Flush): 120 l/h

Consumption - UV probe:
Constant flow: 15 l/h plus 10 l/h UV optical system
Analytical flow: 120 l/h
Flushing: 185 l/h

Protection class: IP 23 (DIN 40050)

Height: 640 mm (25,2")
Width: 425 mm (16.7")
Depth: 250 mm (9.8")
Weight: 29 kg (63.9 lbs)


C) Charpy Pendulum:
Capacity or Impact Energy: 300 J
Impact Velocity: 5.42 m/s (5.42 m/s)
Readout Type: Digital (PT-DUR Processor)
Scales: 300-303 J ± 151-153
Reading resolution: 0.3 J /0.2°.
Standards used: EN 10045, ASTM E23

Drive
-Lift: Motorised
-Brake: Drum, foot pedal operated

Accessories included:
-Impact blade (fitted)
-Blade and support centring tester.
Tongs for placing specimen between supports.
-Integral transparent polycarbonate protection.

Dimensions
-Base: 860 × 660 mm
-Height:
1250 mm (with hammer at rest).
2000 mm (with the hub in the upright position).
2150 mm (with guard).

Weight of the hammer: 20.4 kg approx. (200 N)
Weight (machine): 400 kg

Other Details:

Guarantee: Without guarantee

Current condition: Not running. Can be shown in dry cycle

Availability: Immediate

Similar Products:

*Name:
*Contact Number:
*Company:
*Email:
*City:
*Country:
*Comments:

Contact Us

Head Office - Europe
Parque Tecnológico de Boecillo
Calle Andrés Laguna 9-11
E - 47151 Valladolid
Spain
+34 983 549 900
info@machinepoint.com
See our other Offices »

MachinePoint all around the world