Rotary compression moulding press. Sacmi Compression Molding Machine year 2012 Includes: - Molding Press CCM48SB - Mold 48 cav.1881(28 mm.) AB1881CSD4 2gr - Scoring Folder machine SFM12LB - Cap hopper Total Running Hours 15.000 Can be seen in production! ...
2012 | 300045782 | SACMI
More information
Mould and die cleaning equipment. Pisko PC96 PET preform neck crystallizer machine, year 2014 Output: 12 000 preforms/hour Working hours: 27000 hours Configuration: PCO 1810 neck finish Includes following auxiliaries: - Preform Feeding System - Unscrambler - Temperature Control...
2014 | 300040281 | PISKO
More information
Moulds for Preforms. HUSKY Cold Half System HyPET 120 year 2016 Neck PCO 1881 Weight 22.7 g, for 350-450 CSD Model: 32 50x130 GEN 3.5 Stroke 63 mm Max Capacity: 134t Shot Counter: Around 117,000 Set of new core change for 22.28g can be purchased to an additional...
2016 | 300043001 | HUSKY
More information
Injection molding machine up to 250 T . Injection machine for RUBBER -Top-Bottom hydraulic lift stroke 0-250mm -Heating plate daylight 550mm -Injection piston diameter 65mm -Rubber feeding inlet dimensions 45x15mm -Heating Plate 410x320 (WxD), T slot distance 200mm ...
2021 | 300044653 | YIZUMI
More information
Injection molding machine from 500 T up to 1000 T. ...
2013 | 300043038 | KRAUSS MAFFEI
More information
Injection molding machine up to 250 T . ...
2018 | 300046120 | ENGEL
More information
Injection molding machine up to 250 T . ...
2018 | 300046127 | ENGEL
More information
Bi-Injection moulding machine. Engel 3k (Triple injection moulding machine) NEW MACHINE, NEVER USED (less than 20 working hours) The 3rd injection unit has the following characteristics: Screw diameter: 18mm L/D 24 Shot weight: 23g Injection volume: 25cm^3 Plasticising capacit...
2018 | 300046156 | ENGEL
More information
Injection moulding machine for PET preforms. Complete system Husky HPET HPETL 230E RSE80D-80 Construction year 2014 Includes the following: - Dryer system 3000 Kg Plastic Systems - Dry air curtain unit - Hot runner 32-cavities - T-conveyor belt - 2x vibration table Working hours : 50...
2014 | 300046178 | HUSKY
More information
Moulds for Preforms. HUSKY Cold Half System HyPET 120 year 2017 Neck 3025 Weight 17g, for 500-600ml water bottle Model: 32 50x130 GEN 3.5 Stroke 60 mm Max Capacity: 88t Rec. Capacity 85t Complete refurbishment done by HUSKY in 2017 Perfect condition and availa...
2012 | 300042893 | HUSKY
More information
Printing machines for food and beverages caps. TAMPOPRINT printing machine 3 colors in 1 lane Type of ink: Solvent-based ink 28mm caps 45.000 caps per hour Machine was never used in production, only commissioned Available immediately...
2019 | 300043654 | TAMPOPRINT
More information
Bi-Injection moulding machine. Working hours 14.000 Injection unit 1 Screw diam. 70 LD 22 Heating zones 6 Heating power 45 kW Screw stroke 390 mm Max. Injection capacity 1501 cm3 Screw speed 205 min-1 Screw torque 3600 Nm Injection rate 435 cm3/s Injection pressure max 2300 bar...
2018 | 300044094 | ENGEL
More information
Injection molding machine from 1000 T. The machine is a prototype made to use a mixture of PO+PE; works with recycled materials. Machine has worked for R&D and prototypal development. The machine can produce pallets with dimensions up to 1300x1100 *The machine can produce with recycled m...
2017 | 300044245 | INTEC-OTTOGALLI
More information
Injection moulding machine for food and beverages caps. Husky H300 RS80/70 injection moukding machine for caps & closures Includes Piovan RPA800 Dehumidifier Working hours: 67.900 h In good condition and available immediately! ...
2008 | 300039841 | HUSKY
More information
Injection molding machine up to 250 T . Working hours = +/- 24.000 (10.02.23) Robot WITTMANN W818 full eletric 2000mm Z, 1200 Y, 620 X (price on request)...
2017 | 300045120 | ZHAFIR
More information
Injection molding machine from 250 T up to 500 T . Working hours: 29,532 (march 2023)...
2018 | 300045358 | HUSKY
More information
Injection molding machine up to 250 T . Shuttle table stroke 650mm Weight on shuttle table (Max): 240Kg Vertical, never used only 5 working hours....
2020 | 300045837 | ARBURG
More information
Injection moulding machine for PET preforms. Complete system Husky HyPET 120 P 85/95E85 Construction year 2008 Working hours : 80.000 Includes the following: PIOVAN Chiller PIOVAN dryer RPA 1800 PIOVAN Hopper Including cold half and hot runner HUSKY Molds - HUSKY PCO 1810 - 34 gr 30/25 - ...
2008 | 300046194 | HUSKY
More information
Injection molding machine up to 250 T . Almost no working hours. Dryer and Robot included, info below. INTERFACE: Euromap 63 -2x Pneumatic core pull for clamping platen incl. Pneumatic regulator -Additional pressure controller 0 to 10 bar -Pneumatic maintenance unit incl. pressure regul...
2019 | 300043743 | WITTMANN BATTENFELD
More information
Injection moulding machine for PET preforms. Used Netstal injection molding machine SynErgy 2400-2550 Year: 2005 Resin Dryer: Piovan GP35 - Year 2005 Hopper: Piovan DSN523HE - Year 2005 Mold Dehumidifier: Eisbar Soft Drop: NOT Included Dosing Unit: NOT Included Color Mixer: NOT Included Mo...
2005 | 300044240 | NETSTAL
More information
Injection moulding machine for PET preforms. Sacmi IPS 200D injection moulding system for PET preforms The system includes: - Sacmi IPS 220 injection moulding machine - One complete mould of 72 cavity with cold half 1881 PCO 32,5 gr - Resin Dryer, Genesys - Mould Dryer, Piovan - Hopper, Piov...
2016 | 300043674 | SACMI
More information
Injection molding machine up to 250 T . Working hours 10.02.23 = +/- 28.000hours Robot not included...
2016 | 300045119 | ZHAFIR
More information
Rotary compression moulding press. Complete compression moulding machine SACMI CCM003 from 2009 CCM 2009 @ 32 281 hrs PMD 2009 @ 25 996 hrs FSM 2009 @ 6966 hrs The line includes: Compression Moulding machine CCM 003 Set of tools (AB28-1810) Set of Tools (AB 45mm)Gravimetric mi...
2009 | 300044147 | SACMI
More information
Bi-Injection moulding machine. Accessories: Robot : Wittmann HRTC : 1 Unit ( 8 zone) MTC: 1 unit Dehumidifier : 2 Unit...
2012 | 300046103 | ARBURG
More information
Bi-Injection moulding machine. Another machine available, price per unit. Accessories: Robot :Kuka (KRC) HRTC : 1 Unit (6 Zones) MTC: 1 Unit (Local) Dehumidifier : 1 Unit...
2011 | 300046101 | ARBURG
More information
Robot. For pallet preparation...
2018 | 300046114 | AND & OR
More information
Injection molding machine up to 250 T . Worked hours 26673 hours (May 2023) Hours under power 32725 hours (May 2023) Injection and Clamp Drives renewed in 2015 The machine is in good condition....
2010 | 300042600 | SUMITOMO, DEMAG
More information
Rotary compression moulding press. Rotary compression molding machine Sacmi CCM32MB from 2015 Complete Line with 32 cavity presse and SFM and PMV Capacity: 700 caps/minute Working hours: 10,000 hours The line is in production and can be inspected immediately! ...
2015 | 300039134 | SACMI
More information
Moulds for Preforms. M PET Mold Masters Hot Runner for HUSKY HyPET 120 Year 2013 Perfect condition and available immediately! ...
2014 | 300042892 |
More information
Moulds for Preforms. Husky cold half and robot plate Weight 9.5gr Neck: 26-22.12 P3 Cycle time: 6,7 sec Take out plate included 7.066.300 shots...
2014 | 300043450 | HUSKY
More information
Injection moulding machine for food and beverages caps. Complete line Husky G400 GEN-RS85/70 from 2001 The machine currently works with moulds 64 and 72 cavities 2,35/2,6/2,9 gr, PCO1881/1810 Moulds are NOT included The line is in production and available immediately! ...
2001 | 300044207 | HUSKY
More information
Injection molding machine from 1000 T. ...
2015 | 300045200 | KRAUSS MAFFEI
More information
Injection molding machine from 500 T up to 1000 T. Hybrid machine...
2014 | 300045279 | ARBURG
More information
Injection moulding machine for caps & closures. Engel e-cap 160 ton year 2018 with mould KTW 24 cavities, neck diam. 28 mm, 1881 Includes: Dosing and colouring unit KEM-TOUCH Working hours: 2000...
2018 | 300045329 | ENGEL
More information
Injection moulding machine for PET preforms. Complete HUSKY injection moulding system for preforms from 2010 Model: HyPET300 P100/110 E100, 72 cavities Working hours : 65.000 hours The line includes the following ancilliaries and equipment: - Robot - Resin hopper Plastic System - Resin dry...
2010 | 300045107 | HUSKY
More information
Injection moulding machine for PET preforms. Injection molding system HUSKY HyPET 300PET P100/120 E140 for PET preforms . Includes: Dry Pack cabinet with integrated climate control of mold area EISBAR, from 2007, Power:147 kW Dry Pack Hopper EISBAR model:H5.5 from 2007 Blower KAESER model:BB...
2004 | 300045466 | HUSKY
More information
Injection molding machine up to 250 T . Available for sale - Prices upon request 1x 2007 machine 30 ton 30 mm screw - 85 g shot weight 1x 2008 machine 30 ton 30 mm screw - 90 g shot weight 9x 2020 machines 30 ton 40 mm screw - 227 g shot weight 6x 2020 machines 30 ton 40 mm screw - 227 g ...
2021 | 300045510 | PYRAMID PLASTICS
More information
Bi-Injection moulding machine. The machine is brand new. It has been installed, but has zero worling hours. Polaform turntable type PF800 Turning plate diameter: 800mm Total height: 148mm Ejector position: 8x on X = 203,2/Y = 50,8 and X =50,8/Y=203,2 R25mm 4x on X = 0/Y = 91,2 m...
2021 | 300044037 | SUMITOMO
More information
Injection molding machine from 250 T up to 500 T . Only 3600 working hours. Wittmann W832-0757, year 2014. Machine with separated hydraulic unit for Core Pulls. Original screw-barrel group INCLUDED in the price. New, still packed, diameter 64mm. ...
2008 | 300045958 | TOYO
More information
Injection Moulding Machine for elastomers/LSR. for LSR and Rubber...
2017 | 300045974 | ARBURG
More information
Injection molding machine up to 250 T . Robot : Harmo (HL11-150G) HRTC : 1 Unit (12 Zones) MTC: 1 Unit (Local) Dehumidifier : 1 Unit...
2011 | 300046087 | ARBURG
More information
Injection molding machine from 250 T up to 500 T . Working hours: 15006...
2011 | 300046110 | ITALTECH
More information
Injection moulding machine for TPR. Automatic rotary machine for thermoplastic boot injection including special screw geometries for BIODEGRADABLE and regenerated materials as well as the possibility of injecting technical articles of pharmaceutical industry consisting of: -1 4-COLUMN...
2021 | 300046112 | BRSERVICE SRL VERA
More information
Injection molding machine from 250 T up to 500 T . ...
2021 | 300046139 | HAITIAN
More information
Injection moulding machine for PET preforms. Complete system Husky HyPET 300 P100/110E120 Construction year 2009 Working hours: 93.000 Includes the following : PIOVAN Chiller PIOVAN dryer RPA 1800 PIOVAN Hopper Including cold half and hot runner HUSKY Molds - HUSKY PCO 1881 - 26,76 and 24,...
2009 | 300046206 | HUSKY
More information
Printing machines for food and beverages caps. Printing machine for caps MOSS MO-3062/3 (Italy) Capacity up to 72000 pieces per hour Printing machines for caps of PCO1881 and 1810 standards Possibility of applying three-color printing...
2012 | 300041621 | MOSS
More information
Injection molding machine up to 250 T . Working hours: 39.220 **NEW, PACKED, NEVER USED SPARE PARTS AVAILABLE(NOT INCLUDED, PRICE ON REQUEST)**...
2005 | 300043799 | ENGEL
More information
Injection molding machine from 250 T up to 500 T . ...
2002 | 300043851 | ENGEL
More information
Robot. ...
2015 | 300043947 | FANUC
More information
Injection moulding machine for PET preforms. Complete system of Husky GL300 PET P100/110 E120 injection moulding machine for preforms - Resin Dryer, Plastic systems DR222HT - Hopper : Plastic System H4500 - Mould Dehumidifier Munters ML1100E - Chiller, NOT Included - Conveyors : MB Conveyors...
2000 | 300044185 | HUSKY
More information
Injection molding machine up to 250 T . ...
2001 | 300044536 | KRAUSS MAFFEI
More information
Injection moulding machine for PET preforms. Complete system for preforms Netstal PET-LINE 60N/95 from 2012 Includes: - PET Injection system Netstal PET 2000-3700 R - 60 cavity injection mould Otto Hofstetter AG (27 gr and 30,5 gr) - Dryer Piovan 560 kg/h - Air dehumidifier RPA 1200, 1200 m3...
2012 | 300044958 | NETSTAL
More information
Injection molding machine from 1000 T. Energy saving Servo motor machine. ...
2012 | 300045103 | HAITIAN
More information
Injection molding machine from 500 T up to 1000 T. ...
2011 | 300045656 | MIR
More information
Injection molding machine from 500 T up to 1000 T. ...
2015 | 300045654 | HAITIAN
More information
Injection moulding machine for food and beverages caps. Husky injection molding machine for closures Model: Hycap 225 from year 2015 Includes Husky 48 cavity mold 29/25, weight 1.25g Output: 1.5 million closures/day Working hours: 31.000 Available immediately! ...
2015 | 300045736 | HUSKY
More information
Injection molding machine up to 250 T . ...
2008 | 300045898 | ENGEL
More information
Injection moulding machine for PET preforms. Husky GL 300 P100/110 E 100 for PET preforms from 2003 Includes hopper, dryer, mould dehumidifier and mezzanine Running Hours: 95296 Chiller and mold not included Last audit January 2018 by HUSKY Auxiliaries: Handling / Robot Model FSI 200 GL...
2003 | 300041429 | HUSKY
More information
Injection molding machine up to 250 T . First owner Connector for robot connection: YES (EUROMAP 12 standard) Does not include robot...
2010 | 300045919 | JON WAI
More information
Injection moulding machine for PET preforms. Complete injection molding system for production of PET preforms HUSKY GL300PET P100/110 E120, Constructon year 2003 Injection Unit: P100/110 E120, Clamping Unit: GL300PET, Dryer:Plastic System DR220HT Mold Dehumidifier Plastic System DSH1800 ...
2003 | 300045929 | HUSKY
More information
Robot. Cartesian robot, TMA midiLine, 2018. Four axes: X, Y, Z, C - X axis travel: 700 mm - Y axis travel: 1200 mm - Z axis travel: 2000 mm - C rotation: 90 degrees Working hours: 30.669...
2018 | 300045985 | TMA AUTOMATION
More information
Injection moulding machine for food and beverages caps. Husky H225 RS55/50 injection molding machine from 2002 Running hours: 155.000 It was used for production of caps and closures Machine in working condition ...
2002 | 300045998 | HUSKY
More information
Injection molding machine up to 250 T . Accessories: Robot : Harmo (HL11-150G) HRTC : 1 Unit (10 Zones) MTC: 1 Unit (Local) Dehumidifier : 1 Unit...
1999 | 300046096 | ARBURG
More information
Injection molding machine up to 250 T . Accessories: Robot :Harmo ( HL11-150G) HRTC : 1 Unit ( 10 Zones) MTC: 1 Unit (Local) Dehumidifier : 1 Unit...
2001 | 300046095 | ARBURG
More information
Injection molding machine up to 250 T . Robot :Harmo ( HL11-150G) HRTC : 1 Unit (6 Zones) MTC: 1 Unit (Local) Dehumidifier : 1 Unit...
2000 | 300046088 | ARBURG
More information
Bi-Injection moulding machine. Robot : Wittmann HRTC : 2 Units (8 Zones) MTC: 1 Unit (Local) Dehumidifier : 2 Units...
2006 | 300046058 | ARBURG
More information
Injection moulding moulds. Glass 260ml (Compact) 6 cavities Weight of the product: 13 g. Capacity: 4000 pieces/h Currently working on KRAUSS MAFFEI - KM280-1400 C3 800.000 injection cycles made...
2015 | 300038154 | HOME MADE
More information
Injection molding machine up to 250 T . Working hours – 102 000 Motor – 18,5 kW Total – 29 kW...
2004 | 300039249 | ENGEL
More information
Moulds for Closures. Husky Hot runner from 2008 Rouxel watercap cold half with the slitting machine Taiwan hwa long with the thermocontroller PMS Mold Master Mold is working condition Neck 30/25 2gr 16 cavities Mold runs at 6,5 sec Dimensions of the mold: 885 x 380 x 5...
2008 | 300039326 | HUSKY
More information
Injection molding machine from 500 T up to 1000 T. PLC and electrical components overhauled in 2017...
2000 | 300040806 | HUSKY
More information
Complete Plant for EPS packaging. Fully equipped EPS tableware production line. Brand Inovas. Purchase date 2016-2018 4x EPS CUP THERMOFORM MACHINE Model: InTerm C06 3x EPS CUP THERMOFORM MACHINE Model: InTerm C04 1xpre Expander Model: InPre 50 Plus: Pump ELEKTROR Model: 1...
2017 | 300041652 | INOVAS
More information
Injection molding machine up to 250 T . 1st injection unit Ø 25 mm Screw stroke 160 mm Max injection capacity 79 cm3 Injection rate 99 cm3/s Injection pressure 2200 bar 2nd injection unit Ø 18 mm Screw stroke 100 mm Max injection capacity 25 cm3 Injection rate 66 cm3/s Injection pressu...
2013 | 300041739 | ENGEL
More information
Rotary compression moulding press. Complete SACMI line for closures from 2009 For CSD PCO1881 Closures along with Molds & Tools for PCO1810 Offer includes: 2 x CCM 32 M working hours: 65,000 and 35,000 1 x FSM 12L working hours: 28,000 1 x PMV 224D working hours 57,000 CVS053B O...
2009 | 300042643 | SACMI
More information
Rotary compression moulding press. Complete compression molding line for one piece closures Sacmi Product: PCO-1881, neck 28mm, 2.55 gr. Capacity 500 pcs/min. Working hours: 82000 h The line includes: · Sacmi Rotary press CCM003C (of year 2006) with slitting machine · Sacmi Fold...
2006 | 300042662 | SACMI
More information
Injection molding machine from 1000 T. Working hours of the machine: 7163 Reinforced screw. No moulds for sale Robot Husky TMA is included Year of production: 2008....
2008 | 300033372 | HUSKY
More information
Moulds for Preforms. Used Cold half and robot plate for Husky injection molding machine Weight of the preform 30.4gr Neck: 26-22.12 P1 gravity II Lenght of the preform 119,20 mm Take out plate for the robot included the hotrunner is not included Mould stored Number o...
2016 | 300043449 | HUSKY
More information
Bi-Injection moulding machine. Engel DUO bi injection molding machine Opening stroke(with pressure pad): 1230 kN Opening force: 437 kN Tie-Bar diameter: 265mm Dry-Cycle (Euromap 6): 5.2sec Dry-operation stroke: 1300mm -Middle Platen Opening stroke: 1475mm Min distance Fixed plate...
2008 | 300043474 | ENGEL
More information
Injection molding machine from 1000 T. Includes: Robot Working hours 18916 (27.04.23)...
2017 | 300043841 | PROTECNOS
More information
Injection molding machine up to 250 T . With Robot...
1998 | 300043850 | ENGEL
More information
Injection molding machine from 1000 T. Euromap 2700H/22500 ROBOT INCLUDED. -Injection capacity HDPE: 9543g -Plasticising capacity HDPE: 180g/s -Opening force: 1100 Kn -Max mold weight: 60ton....
2011 | 300043910 | NEGRI BOSSI
More information
Injection molding machine from 1000 T. Robot (price on request)...
1998 | 300043909 | ENGEL
More information
Injection molding machine from 1000 T. Accumulators Koch dosing unit...
2004 | 300043936 | HUSKY
More information
Injection molding machine from 500 T up to 1000 T. Full electric Engel E-Duo 1340/700 PICO...
2014 | 300044319 | ENGEL
More information
EPS Shape Moulding Machines. EPS forming machine with mould for the production of EPS formwork blocks In one cycle the machine produces 2 blocks open on both sides and 1 block closed on one side (see photos) Block size: 1000 mm x 250 mm x 250 mm Block wall thickness: 50 mm T...
2008 | 300044377 | IZOTERM
More information
Injection molding machine from 1000 T. ...
2014 | 300044518 | SACMI
More information
EPS Shape Moulding Machines. EPS Shape moulder machine Max dimensions: 1395/870 1x Fish crate mould included in the price Mold dimensions L x W x H: 462mm x 278mm x 80 Still in production 2 Units available (PRICE per Unit) ...
2006 | 300044858 | ERLENBACH
More information
EPS Shape Moulding Machines. EPS Shape moulder machine Max dimensions: 1270/870 Still in production...
2006 | 300044861 | ERLENBACH
More information
Injection molding machine up to 250 T . full electric, 180ton...
2013 | 300044883 | JSW
More information
Injection molding machine from 1000 T. 1600ton...
2008 | 300044885 | TOSHIBA
More information
Robot. Max. load 15 kg Transversal 2200 mm Vertical 1300 mm...
2014 | 300045041 | YUSHIN
More information
Robot. Pneumatic manipulator FEATURES Max. capacity 550 Kg Maximum working radius: 4000 mm Maximum vertical lifting speed: 0,5 meters / second Vertical stroke: 2450 mm Control system: pneumatic only Power supply: filtered compressed air (40 µm), not lubri...
2017 | 300045277 | DALMEC
More information
Injection molding machine from 500 T up to 1000 T. Robot not included...
2007 | 300045655 | NEGRI BOSSI
More information
Rotary compression moulding press. Complete compression molding line for closures SACMI ССМ003А Product: PCO1881, neck 28mm, 2.5 gr and PCO1810, 28mm 2,8 gr. Capacity 500 pcs/min. Working hours: 74,500 The line includes: · Sacmi Rotary press CCM003C (of year 2007) · Sacmi Fol...
2007 | 300045690 | SACMI
More information
Injection molding machine from 500 T up to 1000 T. Polysterene injection capacity: 2750 g Polypropylene injection capacity: 2171 g Control System: Microset Zeus 800 Equipped with hydroaccumulators. Producing product: PP pail The dosing and feeding system is not included in the price No robot Euromap ...
2007 | 300035923 | BMB
More information
Injection molding machine from 500 T up to 1000 T. Machine fully operational: Platen parallelism checked in 2020. Pumping group and system pressure is in good condition. Controller and software replaced in 2017 with a modern i7 based core processor Replacement of all hydraulic hoses. Vertical robot ...
2003 | 300040023 | HUSKY
More information
Injection molding machine up to 250 T . Working hours: 75.000 Three-phase material feeder, masterbatch dosing unit and robot are not included....
2004 | 300045727 | ENGEL
More information
Injection molding machine from 250 T up to 500 T . ...
2012 | 300045895 | ENGEL
More information
Injection molding machine up to 250 T . ...
2008 | 300045894 | ENGEL
More information
Injection molding machine up to 250 T . ...
2016 | 300045850 | BMB
More information
Moulds for Closures. OMMP injection mould for fruit-oil closure 29/21, year 2012 16-cavity mould Neck: 29/21 edible oil Approx. weight: 1.7g Material: LDPE 8.1 million shots Includes: - Hot runner system Yudo. - Heating thermostat with connection cables (Multitherm 4...
2012 | 300045927 | OMMP
More information
Injection molding machine up to 250 T . ...
2006 | 300046022 | HAITIAN
More information
Injection molding machine from 250 T up to 500 T . Robot Tecnomatic included in the price. ...
1998 | 300046024 | REALPRESS
More information
Injection molding machine up to 250 T . Euromap 12 Robot Sepro included...
2002 | 300046140 | NETSTAL
More information
Rotomolding machine. COMPLETE ROTOMOLDING WWTP (WASTEWATER TREATMENT PLANT) PLANT FORMED BY: TWO Polivinil Rotomolding machines, model PRM5000 4C, years 2014. Each machine has: Cooking chamber Central part Burner Cooling station Operator platform Feeding zone MOLDS INC...
2014 | 300046254 | POLIVINIL
More information
Injection molding machine from 1000 T. Injection unit code: i215 Injection capacity PS: g 10880 - oz 383 Injection capacity PE: g 8630 - oz 304 Max. screw speed: rpm 90/90/75 (90/85/65) Mold opening force: ton 165 Clamping stroke: mm 2700 Mold close speed (High): m/min 43 (35.8) Mold clos...
2003 | 300035544 | LG
More information
Injection molding machine up to 250 T . Working hours – 102 000 h Motor 18,5 kW...
2001 | 300039248 | BATTENFELD
More information
Injection molding machine up to 250 T . Working hours – 82 000 Motor – 18,5 kW...
2005 | 300039247 | KRAUSS MAFFEI
More information
Moulds for Closures. Plastisud Mold (Made in France) Mold: 72 cavities Format: 30/25 low Weight: 1,82 gr Manufacturer: Plastisud Mould dimensions : Width 640 x Length 1 590 x Thickness 700 mm Press : Netstal Synergy 3500 Guaranteed cycle time with cooling to temperat...
2007 | 300041699 | PLASTISUD
More information
Injection moulding machine for PET preforms. Husky injection molding machine for preforms from 2003 GL 300 PET - P100/120 E140 Offer includes: Cooling Robot by Cool Jet Model FSI200GL300 MB Conveyor Dehumidifier for PET granulate type DR224HT with a 7000-litre tank and a dedicated pump ...
2003 | 300042987 | HUSKY
More information
Robot. Motoman robot 160Kg With Nx100 control unit Available from March 2022...
2007 | 300043278 | MOTOMAN
More information
Rotomoulding mold. 1 mould for separate collection of glass 1700 lt 1 double-bottomed mould for 1700-litre waste bin 1 mould for glass/paper/plastic recycling bin 2200 / 2500 lt 1 conical mould for 2200 lt bin 1 double mould for 2500 lt waste bin 1 mould for 3500 lt ...
| 300043739 | HOME MADE
More information
Injection molding machine up to 250 T . Type of control: Selogica Closure System: Knee hours worked 37 785 (February 2022)...
2000 | 300043824 | ARBURG
More information
Injection molding machine from 500 T up to 1000 T. Machine in production 6 x air valve free programing Nozzle open/close valve Hot Runner 12 zones 1x core puller. Euromap for robot...
2011 | 300043959 | STORK
More information
Injection molding machine up to 250 T . Control MC4 ...
1999 | 300044247 | KRAUSS MAFFEI
More information
Injection moulding machine for food and beverages caps. Used Netstal SynErgy 3500-3700 E from 2007 Clamping force 3500 kN Screw diameter 80 mm Plate dimensions 1050x1150 Clearance between columns 720x720 Mould hight 600-950 Opening stroke 0-700 Motor power 90 kW Heating power 53,5 kW Dimensions 9,65x2,33...
2007 | 300044202 | NETSTAL
More information
EPS Shape Moulding Machines. The machine is designed for the production of moulded polystyrene foam products. The moulding process is carried out using water steam and a vacuuming process in full automatic mode. Approximate water steam consumption: 450 kg/h (0.15 MPa) Approxima...
2018 | 300044375 | IZOTERM
More information
Injection molding machine from 500 T up to 1000 T. Included Robot SEPRO 4040 S3 Visual (2004)...
2001 | 300044394 | KRAUSS MAFFEI
More information
Injection molding machine up to 250 T . Hybrid machine Working hours: 74500 (16.11.2022)...
2001 | 300044535 | DEMAG
More information
Injection molding machine up to 250 T . 25.000 working hours 4 units available (Price per Unit). Control CC200...
2010 | 300044614 | ENGEL
More information
Moulds for Preforms. Used cold Half for preform Brand: Husky Weight: 12.5 gr Neck: 29/25 for still water Cavities: 96 cav. Pitch = 50 x 140 HPP 4.0 Mould number of shots: 305.185 take out plate ( with 384 pcs of tubes )+ coolpik tubes ( 96 pucks and 288 pcs of tubes):...
2014 | 300044628 | HUSKY
More information
Injection molding machine from 500 T up to 1000 T. Hybrid machine. 700ton 60mm screw....
2013 | 300044747 | ENGEL
More information
Injection molding machine from 500 T up to 1000 T. Still running and not only in dry condition 6-axis-Fanuc robot M16i (2001) included conveyor belt and safety fence included Robot interface Control NC10 Without hopper 6-fold cascade pneumatic Shot weight: 2.550gr./hp...
2001 | 300044759 | DEMAG
More information
Injection molding machine up to 250 T . ...
1998 | 300044928 | KRAUSS MAFFEI
More information
Injection molding machine from 250 T up to 500 T . Servo motor machines, great energy efficency Two machines available; PRICE IS FOR THE TWO MACHINES....
2018 | 300045020 | TONGJIA
More information
Injection molding machine up to 250 T . Servo-moto pump (Great energy eficiency) Two platen machine. Only 135 working hours Included in the price: -Spare barrell -Winch for mold change -Material dryer -Hopper loader -Mould temperature control -HOT RUNNER -Take out conveyor...
2015 | 300045092 | BOY
More information
Rotomolding machine. Rotomoulding equipment Brand: ACABE Model: RB-201 Equipment for the manufacture of PUR parts of different sizes. Moulding system without heat input - Impeccable condition. - With safety fairing and automatic closing. - Automatic stop system in case...
2005 | 300045099 | ACABE
More information
Bi-Injection moulding machine. Bi-material thermoplastic injection moulding machine 500 ton, 763+422 cm3, with hydraulic rotary table 1000 mm, with incorporated robot. CC200 control Working hours: 37000 Injection unit 1, 60 mm, 763 cm3. With injection accumulator Injection unit ...
2014 | 300045124 | ENGEL
More information
Injection molding machine from 1000 T. ...
2013 | 300045128 | TOSHIBA
More information
Injection molding machine from 250 T up to 500 T . ...
1997 | 300045153 | NEGRI BOSSI
More information
Injection molding machine from 500 T up to 1000 T. ...
2002 | 300045498 | NEGRI BOSSI
More information
Injection molding machine from 500 T up to 1000 T. ...
2002 | 300045497 | NEGRI BOSSI
More information
Injection molding machine up to 250 T . 69.000 working hours. Machine with rotary table. ...
2006 | 300045570 | ENGEL
More information
Injection molding machine up to 250 T . spare parts: screw and barrel ...
2003 | 300045664 | BMB
More information
Injection molding machine up to 250 T . 2 units 2013 available, price per unit 1 unit 2010 available, ask for price. ...
2013 | 300045707 | ENGEL
More information
Bi-Injection moulding machine. Robot Campetella Speedy Plus included in the price. ...
2003 | 300045771 | MIR
More information
Injection molding machine up to 250 T . Includes Robot Sepro...
2003 | 300045996 | KRAUSS MAFFEI
More information
Robot. X: stroke 2500mm Y: stroke 2700mm Z: stroke 5000mm MAX weight: 60kg Used with 3200ton machine. ...
2010 | 300046073 | ASITECH
More information
Injection moulding moulds. Body of the shower Product size:116/67/25 Product weight:0,0558 kg. Mold steel: 1,1730 (45), 40X Mold age: 18 months Mold cavities: 2 Runner: Cold Machine clamping force: 80T / 120 T Mold size: 300/350/350 Mold weight: 360 kg Button of the sho...
2016 | 300038499 | HOME MADE
More information
Moulds for Closures. Complete Corvaglia mold Neck 30/25 Weight 1,8g Cavities: 72 Mold was working in a Husky H300 Mold has 25 milions cycles Stored inside a box with anticorrosive oil Available immediately ...
2008 | 300039302 | CORVAGLIA
More information
Injection molding machine from 250 T up to 500 T . N° 1 renew injection moulding machine for thermoplastic materials, almost new, only used for mould trials, our model: impetus bt 270 / 1100 ES (screw Ø 60 mm) § High-tech toggle clamping unit machine § Distance between tie-bars: 570...
2017 | 300040792 | ITALTECH
More information
Robot. 3 axes Cross section: 3,000 mm Demoulding: 1,500 mm Vertical: 1,800 mm...
1997 | 300042158 | PIOVAN START AUTOMATION
More information
EPS Shape Moulding Machines. EPS (Expanded polystyrene) injection forming machine for the production of EPS insulating boards (mold shape) with ship laps in 2,5m x 0,6m x 2cm to 12cm thickness. The machine dimensions are: 4m height x 5,70m length x 4,50m width....
2004 | 300043033 | KURTZ
More information
Injection molding machine up to 250 T . includes: robot Dal Maschio (year 2006)...
2005 | 300043277 | NEGRI BOSSI
More information
Injection moulding machine for covers. 300 Ton Husky Injection Molding Machine Manufacturer: HUSKY Model: G300 GEN RS85/70 Year:1999 Screw stroke: 340mm Screw L/D ratio: 24.7:1 Max Injection Pressure: 29,100 PSI Injection Capacity: 1308 cm3 Tonnage: 300 Tie bar spacing: 720mm X 720mm Cl...
1999 | 300043326 | HUSKY
More information
Bi-Injection moulding machine. Two injection units. -Opening force (with pressure pad): 1000kN; without pressure pad 437 -Tie bar diameter: 200mm -Mold weight max: 30000kg -Dry cyle time: 4.5 sec -Dry cycle stroke: 1100mm Middle platen characteristics: Opening stroke: 1475 Mini...
2008 | 300043621 | ENGEL
More information
Injection moulding moulds. Moulds for the production of small home electric appliancesduction. Most Molds are made/designed in Italy, steel impax -Molds corresponds to Juicers models (V2001/3001/4001) must be sold together since have some parts in common like axle dented wh...
| 300043703 | HOME MADE
More information
Injection molding machine from 250 T up to 500 T . ...
2016 | 300043737 | HUARONG
More information
Injection moulding moulds. Different moulds for many models of shower. With connectors, grid, drains. PRICE FOR COMPLETE PACKAGE PRICE PER MOLD ON REQUEST. POSSIBILITY TO BE SOLD SEPARATLEY ...
| 300043853 |
More information
Injection molding machine from 1000 T. -With robot & hydraulic auto mold clamping system...
2001 | 300043916 | KRAUSS MAFFEI
More information
Injection moulding machine for PET preforms. Krauss Maffei 450-4500 CS PET for Preforms Year 2010 Includes: - Mold: 27g x 48 cavities, 38mm neck, Height 70 mm - Robot Available immediately!...
2010 | 300043434 | KRAUSS MAFFEI
More information
Injection moulding moulds. - Pallet 80x120 (no. 2 moulds, one prints the shelf, the second two sets of 3 blocks + crossbars) - Pallet 110x130 (no. 2 moulds, one prints the shelf, the second the blocks and lower crossbars) - Reel holder wedges (1 mould, used for 3 pieces per mo...
| 300044246 | HOME MADE
More information
Injection moulding machine for PET preforms. SIPA PPS-96 complete system Includes: - Injection machine for preforms - Dryer - Dehumidifier Eisbar - Transformer Around 45.000 working hours Moulds available for: 72 cavities, neck 38 2 start, 38mm SP400, 1881 Disconnected. Cannot be seen in ...
2009 | 300044452 | SIPA
More information
Injection molding machine from 250 T up to 500 T . Hybrid machine Good working condition Robot no included Without additional accessories Working hours: 59 102 (12.08.22)....
2012 | 300044624 | ARBURG
More information
Moulds for Closures. Used cold Half for caps and closures Brand: Husky Weight: 1.75 gr Neck: 30/25 for still water Cavities: 48 cav. number of shots: 239.816 HotRunner not available ...
2016 | 300044651 | HUSKY
More information
Injection molding machine from 500 T up to 1000 T. Hours in Production 25.327...
1999 | 300044632 | SANDRETTO
More information
Injection molding machine up to 250 T . 2 units available, price for unit. ...
2010 | 300044727 | ENGEL
More information
Injection molding machine up to 250 T . ...
2003 | 300044751 | FERROMATIK MILACRON
More information
Injection molding machine up to 250 T . ...
2004 | 300044817 | NEGRI BOSSI
More information
Injection molding machine from 250 T up to 500 T . Robot Wittmann W631-0386 (2003)...
2000 | 300044857 | KRAUSS MAFFEI
More information
Bi-Injection moulding machine. Machine completely refurbished in 2012; refurbishment report available. New inverters and motors; new pumps, Hydraulic motors and reductors changed, New MOOG PLC. Electrical cabinets and cables have been changed with new ones. -Robot Dal Maschio I...
1990 | 300044863 | ITALTECH
More information
Injection moulding machine for PET preforms. Injection moulding machine MIR 280-2-520, year 2003 Two extruder type For preforms type OIL, 29 NECK, 28-30 grams Included: Robot GEFIT Eurochiller EF C180 PET, three input water, inner circulation Dryer PET Plastic Systems DR 106 HT/H 1500 PET H...
2003 | 300044766 | MIR
More information
Injection molding machine up to 250 T . Only used for tests No robot included...
2018 | 300045176 | ENGEL
More information
Moulds for Closures. Used complete mould for caps and closures Brand: home made by the seller in Europe Weight: 2,5 gr Neck: 38 mm for Milk and Juices (old Tetratop packaging) Cavities: 12 cav. number of shots: 938,328 the mould can be be tested Available immediatel...
2007 | 300045226 | HOME MADE
More information
Injection molding machine up to 250 T . working hours: 87838 control system: MC4 Machine manuals available CE certified A test can be carried out. Overhauled machine, fully checked and with warranty (ask for more information). Further additional options can be installed on request (ask fo...
2003 | 300045395 | KRAUSS MAFFEI
More information
Injection molding machine up to 250 T . ...
2008 | 300045560 | SUMITOMO
More information
Injection molding machine up to 250 T . ...
2004 | 300045551 | SUMITOMO
More information
Injection moulding machine for PET preforms. Used injection molding machine for preforms Brand: Sacmi Made by Oima in Italy Model: Stratos SL 3300 180 Year: 2009 Dryer: Plastic Systems D808 HT Hopper: Plastic Systems H2000 Mold Dehumidifier Plastic Systems DL 2400 Mezzanine Molds available...
2009 | 300045728 | SACMI
More information
Injection molding machine up to 250 T . ...
2001 | 300045740 | NETSTAL
More information
Injection molding machine up to 250 T . -Rotary Table machine...
2006 | 300045755 | TURRA
More information
Injection moulding machine for PET preforms. Complete system of NIssei ASB PM 70/65 NII injection moulding machine for preforms Includes the following: 1. PM 75 / 65 NII - ASB Machine 2. Dehumidifier Air Dryer With 1 ton Capacity Hopper ( Conair ) W - 400 3. Mould Sweat Protector ( Conair )...
2014 | 300045910 | NISSEI ASB
More information
Injection molding machine from 1000 T. Robot ABB included...
2007 | 300045921 | HAITIAN
More information
Injection molding machine up to 250 T . ...
2019 | 300045909 | WOOJIN
More information
Injection molding machine from 250 T up to 500 T . Wittmann/Demag handling included To be sold in January 2024...
2004 | 300045943 | DEMAG
More information
Injection molding machine from 250 T up to 500 T . new machine, never used. ...
2019 | 300045952 | PROTECNOS
More information
Injection molding machine up to 250 T . 3 machines available, price per machine...
2010 | 300046018 | SUMITOMO
More information
Injection molding machine up to 250 T . ...
1998 | 300046023 | NEGRI BOSSI
More information
Injection moulding machine for food and beverages caps. Injection Molding Machine for closures Husky H160 RS 55/50 from 2010 Offer includes Hopper and Dosing Unit by Movacolor Working Hours less than 1000 Machine like new Dismantled and available immediately! ...
2010 | 300039085 | HUSKY
More information
Injection moulding machine for food and beverages caps. Injection Molding Machine for closures Husky H160 RS 55/50 from 2010 Offer includes Hopper and Dosing Unit by Movacolor from 2010 Working Hours approximately 400 Machine rarely used. Perfect Condition. Like New Not possible to see...
2010 | 300039088 | HUSKY
More information
Moulds for Closures. Corvaglia cold half for closures Manufactured 06/2002 Material = lPE Product = Closures 30/25H Product Mass = 2,10g Cycle Time = 4,8 sec Cavities = 48 Working on Husky H225 Available immediately ...
2002 | 300035299 | CORVAGLIA
More information
Moulds for Closures. Used mold KTW for closures Number of cavities: 16 Format: 29/21 Oil cap Number of shots: 721.147 cyclce time: 9,4 sec materila LDPE Available immediately! ...
2011 | 300041040 | KTW
More information
Injection molding machine up to 250 T . Working hours: 65.000 h...
2006 | 300042645 | ARBURG
More information
Robot. X-900, Y-1800, Z-2500...
2000 | 300043088 | WITTMANN
More information
Injection molding machine up to 250 T . Machine bought in 2010 completely overhauled...
1990 | 300043569 | SANDRETTO
More information
Injection moulding machine for food and beverages caps. Injection Molding Machine Husky H160 RS 55/50 from 2010 Offer includes Hopper and Dosing Unit by Movacolor Working Hours about 400 Machine hardly used and in excellent condition Machines not possible to be shown working as no power at plant ...
2010 | 300039089 | HUSKY
More information
Injection moulding moulds. -Mould for bowl lid Weight: 88g -Mould for bowl Weight: 181g -Mould for drawer Weight: 43g -Mould for grater Weight: 55g -Mould for cutlery tray Weight: 189g -Mould for dustpan Weight: 66,5g PRICE FOR ALL MOULDS POSSIBILITY TO BE SOLD SEPARATEL...
| 300043860 | HOME MADE
More information
Rotomoulding mold. -Mold for square recycling container, capacity 3.000 l -Mold for garbage bin, capacity: 1.700 l + flat lid -Mold for square recycling container, capacity 2.500 l -Mold for round recycling container, capacity 3.000 l -Mold for round recycling contain...
2006 | 300044080 | BOCA
More information
Injection molding machine up to 250 T . The PLC driver must be replaced...
2008 | 300043752 | ENGEL
More information
EPS block moulding. Foam block mould is used for pressing single foam grains into blocks by applying a temperature factor (water steam). Block dimensions including allowance: 3060 mm x 1250 mm x 1050 mm (see photos) Output capacity: 80 m3/h Steam requirements: p = 0,...
2006 | 300044374 | IZOTERM
More information
EPS Shape Moulding Machines. EPS forming machine with mould for the production of U-shaped corners for door packaging With installed mould, it is possible to produce U-shaped corner with the following dimensions: 1000 mm x 60 mm x 60 mm (see photos) Corner wall thickness: 9 mm ...
2010 | 300044379 | IZOTERM
More information
Rotomoulding mold. For compost bin...
| 300044605 | HOME MADE
More information
Injection molding machine from 250 T up to 500 T . 59896h worked (November 2022)...
2000 | 300044750 | FERROMATIK MILACRON
More information
Injection molding machine from 250 T up to 500 T . Machine completely overhauled; for packaging, with accumulators. Possibility for electric or hydraulic screw motor. Machine with warranty. 2 years warranty for PLC. ...
2022 | 300044898 | ITALTECH
More information
Injection molding machine from 1000 T. Machine completely overhauled. Price for hydraulic motor. Possibility of electric motor (price on request). Machine with accumulators. With warranty. ...
2022 | 300044900 | ITALTECH
More information
Injection moulding moulds. Four-cavity mold for producing tube holder for underfloor heating...
2008 | 300045144 | ATTEMA
More information
Injection moulding moulds. Single cavity mold for manufacturing the distributor for the radiant floor...
2008 | 300045142 | MATREX
More information
EPS Shape Moulding Machines. 7624 hours worked Maximum moulded part size: 2300/1100 mm Maximum moulded part depth: 180 mm Flange - fixed side: 2375 x 1175 mm Flange - movable side: 2375 x 1175 mm Control voltage: 24 V = Energy consumption: ~ 17 kW Operating pressure (pressur...
2007 | 300045154 | ERLENBACH
More information
EPS boiler. Capacity: 3000 kg/h Total volume: 4830 L Maximum allowable pressure: 10 bar Maximum allowable temperature: 184 °C Never used....
2005 | 300045197 | LOOS INTERNATIONAL
More information
Injection molding machine from 250 T up to 500 T . Screw condition: to be overhauled. It is necessary to install a proportional valve for the closing group. Possibility to regenerate screw and cylinder (price upon request)....
2004 | 300045326 | NEGRI BOSSI
More information
EPS pre-expanding. Expansion Chamber: diameter: 1100 mm , volume: 1.4m³, useable volume: 0.9 m³ · Production Capacity: 12g/l: 240kg/h, 15g/l: 320kg/h, 20g/l:430kg/h · Density: 12 - 30g/l · Density Difference: around 3% · Room Height requirement: 5m ...
2018 | 300045225 | FANG-YUAN
More information
Injection molding machine from 250 T up to 500 T . Machine manuals available CE certified To be sold without robot A test can be carried out Overhauled machine, fully checked and with warranty (ask for more information) Further additional options can be installed on request (ask for more information...
2002 | 300045398 | KRAUSS MAFFEI
More information
Injection molding machine from 250 T up to 500 T . Neureder robot included (year 2000) Hours worked 95 369...
2003 | 300045430 | KRAUSS MAFFEI
More information
EPS Shape Moulding Machines. Operating voltage: 220/380V 50 Hz Control voltage: 24V Machine stroke: 800 mm Max moulding size: 1510x870 mm Max depth of moulding: 180 mm...
1997 | 300045422 | ERLENBACH
More information
Injection molding machine up to 250 T . 2 machines available, PRICE per UNIT ...
2003 | 300045550 | SUMITOMO
More information
Injection molding machine up to 250 T . ...
2000 | 300045542 | SUMITOMO
More information
Injection molding machine up to 250 T . ...
2010 | 300045561 | SUMITOMO
More information
Rotary compression moulding press. Used Sacmi line for closures Includes the following: Sacmi CCM 003 from 2006 With lining and slitting machine Includes 1810 tooling Sacmi CCM 001 from 2003 Can be seen running and available immediately! ...
2006 | 300045648 | SACMI
More information
Injection molding machine from 250 T up to 500 T . Working hours: 120.000 CE certified The machine can be visited working until the beginning of August 2023...
2004 | 300045784 | BMB
More information
Robot. Robot Star T 600 III Stroke 800mm...
2007 | 300045790 | STAR AUTOMATION
More information
Injection molding machine up to 250 T . ...
2006 | 300045802 | BOY
More information
Injection molding machine up to 250 T . ...
1999 | 300045800 | BOY
More information
Injection moulding moulds. Shopping Basket, composed by 5 moulds. 1) Bottom Plate (380ton, PP) 2) Front Plate (380ton PP) 3) Lateral Plate (380ton PP) 4) Rear Plate (380ton PP) 5) Lockings (110ton PP) ...
2013 | 300045841 | HOME MADE
More information
Injection moulding moulds. Shopping cart, composed by 7 molds. 1) Tray: 450ton needed, 1 cavity, hot runner YUDO. 2) Basket: 800-900ton needed, 1 cavity, hot runner YUDO 3) Structure: 900Tn (due to mould dimensions). 1 cavity, hot runner YUDO. Weight: 2.8kg 4) Wheel protector...
2016 | 300045844 | HOME MADE
More information
Injection moulding moulds. Set of 12 moulds for the production of kitchen utensils Description (parameters are given for each product in the following order: Number of cavities, Steel type, Mould size (mm), Product weight (kg), Production cycle (sec) 1. Small container (lid)...
2022 | 300045893 | AC MOLD
More information
Injection molding machine up to 250 T . FERROMATIK MILACRON FM 175/200: Materials: PP working hours: 99.028,5 number of core pulls: 2, 1 hydr. + 1 pneum. Euromap: Yes CE certified: NO machine manuals available Robot: NO The machine was disconnected from the power supply at the beginning...
1986 | 300045938 | FERROMATIK MILACRON
More information
Injection moulding machine for PET preforms. SIPA PPS 48/2000 injection molding system for preforms, year 2000 Hours worked: 17.000 Includes: - Sipa 48-cavity PPS48/2000 injection molding machine for preforms, year 2000 - Ceccato Aria CBS 15 G3 compressor, 15/10 bar, year 2013 - Worthing...
2000 | 300046077 | SIPA
More information
Rotary compression moulding press. Complete compression molding system for two pieces closures Product: PCO 28mm Capacity 3,2 cycle per min System including: 32 stations SACMI CCM 001 press from 1998 - Complete set of tools for the production of AF6 closures, weight of the ...
1998 | 300030174 | SACMI
More information
Injection moulding moulds. Injection moulds for welding sockets (corrugated pipes) diameters 200-250 -315-355-400-468-500 mm (Outer Diameter) Manufacturer: TECUS...
| 300036121 | TECUS
More information
Robot. Axis: 4m, 2m and 2,5m Max. load 35 kg...
1994 | 300038529 | DAL MASCHIO
More information
Injection Moulding Machine for elastomers/LSR. MAIN GROUP MACHINE -MODEL : PEGASUS RUBBER , injection/pouring with open mold (spaghetti system ) -16 STATION INCOM PROCESS system PRODUCTION: - one-colour rubber soles or technical articles . THE BASIC MACHINE IS COMPOSED OF: - 1 piston-scre...
2005 | 300041489 | MAIN GROUP
More information
Robot. ...
2002 | 300041633 | ABB
More information
Injection moulding machine for food and beverages caps. HUSKY Injection moulding system for closures H800 RS115/100 from 2011 For caps 2,90g. PCO1810 with a contract cycle of 6.5 seconds The line is included: - Hot channel controller for mold - CapCooler, storage bin, orientator - Intravis video ins...
2011 | 300042076 | HUSKY
More information
Injection molding machine up to 250 T . working hours: 23.000h Euromap: 1200H-400...
2014 | 300042428 | NEGRI BOSSI
More information
Injection molding machine up to 250 T . Akkumulator:Yes Working hours: 72.000h New pump....
2005 | 300042615 | KRAUSS MAFFEI
More information
Injection molding machine up to 250 T . Engine: Fimet-Siemens Interface: Yes U.S.C: 1 Sensor PET: Yes. Working hours: 0 With drying and cooling system...
2006 | 300042706 | BMB
More information
Injection moulding machine for PET preforms. Used Netstal injection molding machine PET 3500-3550-R Year: 2004 Resin Dryer: Piovan DP 627 Hopper: Piovan 4.6 tons Mold Dehumidifier: Blow Air MSP 50 C/4 (centralized for 3 machines) Mold: complete mold 48 cavities 18 gr neck PCO 1810 H...
2004 | 300042798 | NETSTAL
More information
Bi-Injection moulding machine. -Working hours: 36359 Machine complete with second and third injection unit, thermoregulators and protection Hot chambers: 16 Pneumatic radial: 8 Control: DSP4 Dry cycle: 1sec Min/Max mould thickness: 450-750 Robot connection Euromap-12: Yes Core pu...
2010 | 300043190 | NETSTAL
More information
Robot. Robot Brand: Dal Maschio Model: 3P 1200 Year: 2000 With electric panel and hydronic movements For IMM 200-300ton. ...
2000 | 300043242 | DAL MASCHIO
More information
Injection molding machine from 250 T up to 500 T . TWO MACHINES AVAILABLE (PRICE per machine) High speed Thin-wall Injection Molding Machine Brand : Yizumi Model : PAC-350K Italian "Gefran" controller(10.4 touch screen) with English language High Performance Servo pump system Water manifold 13 in 13 ...
2020 | 300043668 | YIZUMI
More information
Injection moulding machine for PET preforms. Injection Molding Machine Nissei PM170/111M YOM 2012, 32 cavities Included 2 molds - 14,6 g neck38 mm and 35,5 g neck 28mm PCO Auxiliary equipment compressor, chiller, cabinet It was working only 4 years. Disconnected ...
2012 | 300040831 | NISSEI ASB
More information
Bi-Injection moulding machine. Machine : BILLION 200T Bi-injection Type : Hercule 260/470-200 Year : 2001 Controls : DIXIT500 Core pulls : 2 Interface for robot : YES Air circuit : 1 Screw diameter mm : H260-38 mm – H470-45 mm Shot volume cm3 : H260- 163cm3 – H470- 278 CM3 Injecti...
2001 | 300043830 | BILLION
More information
Rotomoulding mold. Playground rocker, models: -Jetski -Rocket Possibility to be sold one by one. ...
2006 | 300044083 |
More information
Injection molding machine up to 250 T . Includes ROBOT AlfaRobot T1300WS-S3 year 2015 It can be sold without Robot D250/M1100 Dream Series HYBRID Power supply: 380V, 50HZ included Controller: KEBA i2000 touchscreen included Spindle Diameter: 60mm high-mix included CE Certificates inclu...
2015 | 300044526 | TEDERIC
More information
EPS Shape Moulding Machines. EPS Shape moulder machine Max dimensions: 1510/1200 Seedling tray mold included in the price. Dimensions L x W x H: 524mm x 334mm x 57mm Cavity dimensions in mm: Superior: 22x22; Cavity height 50mm; Dripping hole: 8mm Still in production...
2002 | 300044862 | ERLENBACH
More information
Injection molding machine from 250 T up to 500 T . Working hours: 40 000 Optional: robot Krauss Maffei LRX 150 (price on request)...
2010 | 300044853 | KRAUSS MAFFEI
More information
Injection moulding moulds. 3 backrest designs available. Dimensions and weights are as follows: 55 x 55 x h80 mm 2.100 gr e 2.800 gr Needs 900ton injection machine. Cycle time: 40''-45''...
| 300044882 | HOME MADE
More information
Injection molding machine from 250 T up to 500 T . Working hour 50.200 (april 2023)...
2006 | 300045378 | PROTECNOS
More information
Injection molding machine up to 250 T . 2 machines available, price per unit....
2007 | 300045556 | SUMITOMO
More information
Injection molding machine from 250 T up to 500 T . Working hours: 66 916 (May 2023)....
2004 | 300045601 | DONGSHIN
More information
Injection moulding moulds. Shopping basket mould. Is composed by two molds: 1) Basket mould (Needs 750-800tn injection machine) 2) Cover mould. (600ton machine) It is posible to produce three different models by changing some inserts. Full instructions on how to change ins...
2012 | 300045840 | HOME MADE
More information
Rotomolding machine. Max rpm main shaft 8 rpm Max rpm scondaryshaft 3,5 rpm Mould platen max. dimensions 1630 x 1520 mm Opening-closing stroke 1100 mm Mould max. weight 900 kg Temp. max. heating 300º Stroke and speed shaft X pick-up 3900 mm - 15 m/1' Stroke and speed sh...
2007 | 300037599 | PERSICO
More information
Moulds for Closures. Complete mould for caps and closures Cavities: 72 Type of closure PCO 1810 Hot runner PSG is dismantled, it was cleaned by Messburgger PSG. Cold Half KTW Number of shots: 1.169.221 it is not possible to be tested because the seller doesn't has ...
2006 | 300041039 | KTW
More information
Robot. ...
2002 | 300041218 | ABB
More information
Injection moulding moulds. Manufacturer: SES Srl The mold has been used only for samples Maximum overall dimension:2.924mm x 2.503mm x 1.899 mm Weight of movable mould part: 30.500kg Weight of fixed mould part: 48.500 kg Total weight of the mould: 79.000kg Weight of the bin: 3...
2011 | 300042909 |
More information
Injection molding machine up to 250 T . Brand: Engel Model: Insert 200V/80 Clamping force: 80Ton/ 800kN Opening stroke: 357mm Screw Diameter: 25mm Shot Volume: 69 Mould thickness(min/max): 450min Injection rate: 104cm^3/s Distance between tie-bars:1130 x 625 mould plate Euromap: 200/80 Con...
2012 | 300043048 | ENGEL
More information
Bi-Injection moulding machine. -Working hours: 26.782 Set up for a third injection -Min/Max Mold thickness: 450-750 Hot Chambers: 16 Radial air: 8 Control: DSP4 Robot connection Euromap 12: Yes...
2011 | 300043189 | NETSTAL
More information
EPS boiler. Steam Boiler (through Pellet) Steam production: 1500 kg/h Nominal heat output: 1100 kW Steam Class: Dry saturated Max. service pressure: 8 kgs/cm2 Design pressure: 9 kgs/cm2 Test pressure: 15,75 kgs/cm2 Feed water temperature: 80ºC Heating surface: ...
2014 | 300043279 | SINCAL
More information
Robot. Axes X,Y,Z 686 x 1.164 x 2.005 max. weight 6 kg...
2006 | 300043294 | APEX
More information
Injection molding machine up to 250 T . 2 identical machines available Price per unit. Machines fully overhauled in 2010...
1990 | 300043551 | SANDRETTO
More information
Injection moulding machine for PET preforms. GREENBOX chillers - 2 units Both used for HUSKY GLINE300 Chiller №1. GreenBox Multi 40/HP Cooling capacity - 140.000 Kcal/h Compressor power - 4 x 8.9 kW Rated power - 85.5 kW Tank capacity - 850 liters Dimensions - LxWxH - 4,3x1,65x2.20 meters C...
| 300044205 | GREEN BOX
More information
Injection moulding moulds. Manufactured by Adana Kalipcilik, Turkey List of moulds available in the package (27 in total) Mould 1 20/90 elbow Mould 2 25/90 elbow Mould 3 32/90 elbow Mould 4 20 Tee fitting Mould 5 25 Tee fitting Mould 6 32 Tee fitting Mould 7 20 coupling Mou...
2010 | 300044449 |
More information
Injection molding machine up to 250 T . Working hours: 38 000...
2005 | 300044852 | KRAUSS MAFFEI
More information
Injection molding machine up to 250 T . Optional: robot Krauss Maffei LRX S 100-1731 (price on request)...
2005 | 300044851 | KRAUSS MAFFEI
More information
Injection moulding moulds. Dimensions: D645 x H760 mm e D555 x H370 mm Weights: 590 gr and 155 g ...
2000 | 300044881 | HOME MADE
More information
Injection moulding moulds. Dimensions as follows: Bucket D 305 X H 315 mm Weight: 575g Lid D 312 X H 20 mm Weight 170g...
2000 | 300044879 | HOME MADE
More information
Injection molding machine from 250 T up to 500 T . Robot SEPRO S900-II 3040 BZ (2001)...
1992 | 300045412 | DEMAG
More information
Injection molding machine from 500 T up to 1000 T. ...
2000 | 300045781 | VICTOR
More information
Injection moulding machine for PET preforms. Used Netstal injection molding machine PET 3500-3550-R Year: 2004 Resin Dryer: Piovan DP 627 Hopper: Piovan 4.6 tons Mold Dehumidifier: Blow Air MSP 50 C/4 (centralized for 3 machines) Mold: complete mold 72 cavities Hot Runner made by MH...
2004 | 300042800 | NETSTAL
More information
Injection molding machine up to 250 T . Working hours: 27.000 For Rubber...
2006 | 300044805 | ENGEL
More information
Injection molding machine from 250 T up to 500 T . Robot SEPRO AXES S22/S3 (2011)...
1993 | 300045413 | SANDRETTO
More information
Compression moulding moulds. Kits for CCM48 mould 50 pieces cavity Cap specification: S4 A28 1810, 2.85grm. +-0.15 All parts original Sacmi ...
2006 | 300045446 | SACMI
More information
Injection molding machine from 250 T up to 500 T . ...
1992 | 300045806 | NEGRI BOSSI
More information
Rotary compression moulding press. Sacmi Compression Molding Machine Year 2017 Includes: - Molding Press CCM32MB - Mold 32 cav.1881(28 mm.) - Green Box Cap cooler /R- T/R - PESCE Conveyor&Hopper - Scoring Folder machine SFM12LC - WATER CHILLER INDUSTRIAL FRIGO Model. G...
2017 | 300044328 | SACMI
More information
Injection molding machine up to 250 T . Working h. 13.09.22 - 55.629 hours...
2010 | 300044590 | ARBURG
More information
Injection molding machine from 500 T up to 1000 T. Full electric machine; Almost no working hours, like new. WIth optional festures like: -Bigger mould thickness (900mm) -16 heating zones integrated -4 Core pulls -Valve-gate. -Euromap67 Campetella robot and conveyor belt included. ...
2019 | 300045748 | TOYO
More information
Injection moulding machine for food and beverages caps. Used injection molding machine for caps and closures Brand: Krauss Maffei Model: KM 280/1900 C3 Sprinter Cap Included: - Central cooling system for the mould - Hot runner control for 64 cavities mould - Metal detector: Colortronic OMS - P50P - Ho...
2007 | 300044613 | KRAUSS MAFFEI
More information
Complete Plant for EPS packaging. 2x EPS Thermoform machine Brand: Inovas Model: C06 Year: 11/2017 Max. Number od molds: 6 Weight: 200kg Dimensions LxDxH: 2000mm x 1100mm x 1800mm AIR Connection: 12mm Pressure: min 6bar Consumption: 0.3/0.4 m^3/min COOLING WATER: Connection: 1/2 " ...
2017 | 300043699 | INOVAS
More information
Injection molding machine up to 250 T . Working hours 30.11.22 ... 77,227 h Robot Engel ERC included...
2010 | 300044935 | ENGEL
More information
Printing machines for food and beverages caps. WUTUNG UV Printing Machine Model. OS-WT-3025-3C Capacity 1000 pcs/m Includes: 1. P&S Inspection Machine for Closure Printing Model PS-21EC HYPER 1000 Year 2017 Serial Nr. PS17-SA016 2. Box Shifter ...
2017 | 300045126 | WUTUNG
More information
Injection Moulding Machine for elastomers/LSR. Machine for TPU, TR, TPR soles. 4 injectors. ...
2003 | 300045502 | MAIN GROUP
More information
Injection moulding machine for PET preforms. Complete system of Husky Hypet 225 injection moulding machine for preforms Included Husky cold half 72 cavity, PCO 1881 Preform weight 43,7 gr with core changeover can be reduced to 41,5 gr Husky core changeover Machine working hours: 46.500 h Cyc...
2015 | 300039755 | HUSKY
More information
Injection moulding machine for PET preforms. Complete system of Husky HyPET 400 HPP P100/120 E140 injection moulding machine for preforms Auxiliaries: - Resin Dryer, Plastic systems DP830P HT TCHC - Mould Dehumidifier, DSH 2400 year 2010 - Conveyors Plastic System - Soft Drop: Plastic Sys...
2011 | 300044987 | HUSKY
More information
Injection moulding machine for food and beverages caps. Complete system Husky HPET HPETL AE 230E RS 95D/95 Construction year 2016 Includes: - Dryer system - Dry air curtain unit - Hot runner 32-cavities - T-conveyor belt - 2 x vibration table - Mezzanine In very good condition and wellmantaine...
2015 | 300045764 | HUSKY
More information
Injection moulding machine for PET preforms. Injection Moulding Machine for PET Preforms Sacmi IPS 400 Year 2015 Working hours: 34.000 Included: - MHT Hot Runner 96 cavities NOT Included (they will be re-used inside the company): - Dehimidifyer - Hopper - Chiller - Cold Half - Soft Drop ...
2015 | 300044823 | SACMI
More information
Injection moulding machine for food and beverages caps. Husky H300 RS80/70 injection moukding machine for caps & closures Includes Piovan RPA800 Dehumidifier Working hours: 55.400 h The machine is in perfect working conditiona dn available immediately! ...
2009 | 300039839 | HUSKY
More information
Injection moulding machine for food and beverages caps. HyCap 300 RS80/70 Husky injection moulding machine for caps & closures Includes Piovan RPA800 Dehumidifier Working hours: 47.300 h The machine is in perfect running condition and available immediately! ...
2011 | 300039838 | HUSKY
More information
Injection molding machine from 500 T up to 1000 T. Robot not included...
2017 | 300045649 | HAITIAN
More information
Injection moulding machine for PET preforms. Used Netstal injection molding machine HP 3500/3550 R Year: 1996 Resin Dryer: Piovan GP35 - Year 2013 Hopper: Piovan TN2000 - Year 2013 Mold Dehumidifier: NOT Included Soft Drop: NOT Included Dosing Unit: NOT Included Color Mixer: NOT Include...
1996 | 300044239 | NETSTAL
More information
Rotary compression moulding press. Sacmi PMV224 closure lining machine from 2012 24 head-machine Max height of cap: 24mm Max cap diameter: 33mm Included: Bucket Elevator ELPA001 Centrifugal Feeder Jet Stream Tools for the lining machine Collecting Conveyor Refrigeration ...
2012 | 300039603 | SACMI
More information
Injection molding machine from 1000 T. Model and year of manufacture of the robot; BRAND BORUNTE ROBOT-BRTN22WSS5 .YEAR OF MANUFACTURE : 2017 (ASK FOR PRICE) Working hours 3685 hours...
2017 | 300041775 | SUMITOMO, DEMAG
More information
Injection molding machine from 250 T up to 500 T . Includes dryer & Robot...
2002 | 300043393 | DEU
More information
Injection molding machine up to 250 T . Tie-bar less 90537 hours worked Robot Engel ERC 23/1-EH...
2004 | 300043651 | ENGEL
More information
Injection moulding machine for PET preforms. Complete Husky IMM for PET preforms HyPET 300HPP RF P100/110 TSE55 Running with recycled (rPET) or virgin pellets Flake option (RF) is disabled, filter was removed 600 kg/h Including: Plastic Systems Hopper, Dryer (DR820HD) Working hours: 46...
2012 | 300036508 | HUSKY
More information
Injection molding machine from 500 T up to 1000 T. Full electric machine; from DEC 2022. Never used. ...
2022 | 300045139 | JSW
More information
Injection molding machine up to 250 T . Krauss Maffei 110-380 CX working hours 65.200h / 53.400h mould height: > 300 mm control system: MC5 power: 30kw last preventive maintenance check: April 2023 operational readiness: Yes special equipment: Krauss Maffei LR100 6x hot runner control s...
2007 | 300045620 | KRAUSS MAFFEI
More information
Rotary compression moulding press. Sacmi CCM24 closure line from 2009 Includes slitting unit Mold 1881 hotfill In good condition and available immediately! ...
2009 | 300045721 | SACMI
More information
Injection molding machine from 250 T up to 500 T . Electric motor...
2016 | 300045854 | BMB
More information
Rotomoulding mold. Set of moulds for the production of run-off water evacuation systems Straight and bottom sections, according to provided pictures Weight of product, straight section: 41 kg Weight of product, bottom section: 27 kg MOLD DIMENSIONS, STRAIGHT: Low...
2013 | 300041733 |
More information
Rotary compression moulding press. Complete Sacmi CCM24SA from 2011 with Alaska 3 start neck Offer includes: - CCM 24SA - Folding and Slitting FSM 12 LB - Mold for 3 start neck Alaska closure - Piovan Doser - UPS for Power Back up from EATON 80Kva Working Hours : 51,000 Ca...
2011 | 300041745 | SACMI
More information
Injection molding machine up to 250 T . Used materials PP; ABS; PS; PC+ABS Hours worked 28085,5 h 2533027cycles (October 2022) ...
2002 | 300044659 | DEMAG
More information
Injection molding machine from 500 T up to 1000 T. Used on PP/PCABS material Changed HLP-46 oil Right pillar box replaced Full documentation available ...
1999 | 300044668 | KRAUSS MAFFEI
More information
Injection molding machine from 500 T up to 1000 T. Two moveable injection units (2k), front and rear. Second injection unit screw is 85mm. ...
1999 | 300044746 | MAICO
More information
Injection molding machine from 500 T up to 1000 T. 2 machines available immediately!...
2018 | 300044815 | BORCHE
More information
Injection molding machine up to 250 T . Vertical Machine with Rotary Table 1200mm Only 9959 working hours...
2013 | 300044982 | ENGEL
More information
Injection moulding machine for food and beverages caps. HUSKY HYLECTRIC H225 from 2004 Injection molding machine for caps, 48 cavities Clampling force: 2250 kN Mold CORVAGLIA included, for 28mm PCO 1881 neck finish Dryier Green Box Conveyor Available immediately! ...
2004 | 300045035 | HUSKY
More information
EPS Cutting Line. Type: Packaging machine Max. packaging dimensions: 1000 x 500 x 500 mm....
2020 | 300045078 | GOETTEX
More information
Injection moulding machine for food and beverages caps. - Number of shots: 22.710.000 shots (about 25.500 hours) - State of the art, almost new Netstal Elion 3200-900 - 8 airvalves with gauges.4 on the moving platen, 4 on the fixed platen - top cover for dehumidification of the mold - 10 inlet-outlet ...
2014 | 300033288 | NETSTAL
More information
Injection molding machine up to 250 T . Electric machine Included: vacuum pump, cyclone filter, frame+ hopper, material container, material dryer, storage hopper, storage hopper grid, industrial chiller No robot The main computer was replaced under warranty. Machine was in production an...
2020 | 300043796 | BMB
More information
Injection molding machine up to 250 T . ...
2009 | 300045751 | ENGEL
More information
EPS Cutting Line. 2D multi-wire machine for horizontal cutting of EPS and foam rubber produced by Megaplot (Poland). Number of wires for simultaneous cutting (pcs): 10 Maximum cutting block size (mm): 2 500 x 2 500 x 2 000 Minimum width of the sheet to be cut (mm): 1...
2006 | 300045892 | MEGAPLOT
More information
Injection molding machine from 500 T up to 1000 T. ...
2004 | 300045849 | ENGEL
More information
Injection molding machine up to 250 T . ...
2004 | 300045848 | ENGEL
More information
Injection molding machine up to 250 T . VERTICAL • Double pump for parallel ejector or core puller movement • 2x hydraulic core puller • Injection unit in horizontal position • 1x air valve • 4 cooling water circuits • Euromap 67 • Kisler modul • 2x connector for dosing unit • 5x hot r...
2011 | 300037765 | BATTENFELD
More information
Injection moulding machine for food and beverages caps. Complete plant for spirits (vodka, brandy, wiskey) closures from year 2012 The plant inlcudes: - Assembly unit GEFIT for closures, 10.000 caps/hour - Printing units: DELSA, MADAG, MOSS - IMM Negri Bossi CANBIO 330 - 2 units and CANBIO 220 – 1 u...
2012 | 300040906 | GEFIT
More information
Injection moulding machine for PET preforms. Injection molding system for production of PET preforms HUSKY GL300PET P100/120 E100, year 2002 max. Shotweight 3 344g max. throughput 710 kg/h Working hours 110.000 - Injection Unit: P100/120 E120 - Clamping Unit: GL300PET - Dryer Mann & Humme...
2002 | 300043276 | HUSKY
More information
Robot. Anthropomorphic robot with six degrees of freedom suitable for painting lines with air or floor transportation Payload: 3kg 6 Axis -Range of motion 1st axis: +/- 120° 2nd axis: +/- 70° 3rd axis: +60°/-50° 4th axis: +/- 360° 5th axis: +-360° 6th a...
2016 | 300044002 | CMA ROBOTICS
More information
Injection molding machine up to 250 T . Used Materials PP; ABS; PC; PA6+GF25 No robot included 3872674 cycles (september 2022)...
1996 | 300044652 | BATTENFELD
More information
Injection molding machine up to 250 T . ...
2002 | 300045152 | BATTENFELD
More information
Injection molding machine up to 250 T . Peripherals shown in the pictures NOT for sale with the machine: -Wittmann handling -Wanner mill -Color-Exact colour dosing unit -Fiege electronic heating channel control unit The machine has received a new cylinder and a new screw with non-ret...
2006 | 300045829 | DEMAG ERGOTECH
More information
Robot. 1 Robot KUKA Typ KR 6/2 with electrical cabinet KR C1 with milling spindle and protective cell. Robot is fully functional and was operational until this equipment was shut down. Size of protective cell: Width: approx. 2,25 m Height: approx. 2,80 m De...
1998 | 300045614 | KUKA ROBOTER GMBH
More information
Injection molding machine from 250 T up to 500 T . ...
2006 | 300045924 | ENGEL
More information
Air dryer. Maguire PET Dryer Series: Ultra Low Energy Dryer Performance: 300 kg/h Only used for tests Available immediatly...
2019 | 300043940 | MAGUIRE
More information
Injection molding machine up to 250 T . Used Materials PP; ABS Hours worked: 94588h 7662390 cycles (October 2022) Robot NO...
2000 | 300044658 | BATTENFELD
More information
Injection moulding machine for PET preforms. Used Netstal injection molding machine PET 3500-3550 for preforms Year: 2007 Includes: Resin Dryer Piovan DP626, construcion year 2006 Hopper Mold Dehumidifier not available Mold: complete mold 48 cavities Tie-bar diameter 125mm Mould height...
2007 | 300045148 | NETSTAL
More information
Air dryer. The CD series of drawer dryers is used for the simultaneous drying of several or more plastics, substances or products in small quantities. CD dryers, which are designed for, among other things, pre-drying and heating of products, are also used in e...
2015 | 300045207 | SHINI
More information
Robot. X = 2000; Y = 770; Z = 1000 Used in a 125 ton IMM...
2010 | 300045286 | STAR AUTOMATION
More information
Bi-Injection moulding machine. equiped with REMAK linear robot system availability: Mai / Juni 2023 ...
2001 | 300045341 | KRAUSS MAFFEI
More information
Injection molding machine from 1000 T. core pull coupling system: EAS EIRM 12 1x coveyor belt equiped with REMAK linear robot system availability: Mai / Juni 2023 ...
1997 | 300045342 | KRAUSS MAFFEI
More information
Rotary compression moulding press. Laser Printing machine TAMPOPRINT (2008) Output 100.000 caps/h Laser printing for caps. It was part of SACMI press The printer is in good condition and available immediately! ...
2008 | 300038698 | TAMPOPRINT
More information
Injection molding machine from 500 T up to 1000 T. ...
2000 | 300045616 | MIR
More information
Injection moulding machine for PET preforms. Complete injection molding system for production of PET preforms HUSKY GL300PET P100/110 E100 -Injection Unit: P100/110 E100, year 2000 -Clamping Unit: GL300PET, year 2000 without mold, only 48 drops Husky Hot Runner The line includes: Dryer : ...
2000 | 300034757 | HUSKY
More information
Injection molding machine from 250 T up to 500 T . Robot Wittmann W822 (2013)...
2003 | 300045750 | ENGEL
More information
Injection moulding machine for PET preforms. Injection molding system for production of PET preforms HUSKY GL300PET P100/120 E100, year 2002 - Injection Unit: P100/120 E120 - Clamping Unit: GL300PET - Dryer - Moulds for 40, 46, 48 gramms - Chiller The machine is immediately available In ...
1998 | 300045833 | HUSKY
More information
Robot. 1x Cartesian robot Axis Z Brushless Maximum stroke 1900mm Axis Y Brushless Maximum stroke 900mm Axis X Brushless Maximum stroke 3000mm Wrist overturning 0-90: Included Self-learning control B&R: Included Euromap dashboard Axis X Speed: 2.5m/s Axis Y...
2012 | 300042890 | ASM
More information
Injection moulding moulds. - number of inputs - 2 - material - PS - Forming elements made of hardened steel 1.2312 and 1.2738 Hardness 30-32 HRC. Other steel plates 1.1730. - cold channel system - automatic cycle operation Various models avaiable Price includes one mould mo...
| 300041549 | HOME MADE
More information
Injection molding machine up to 250 T . Used Materials PP; ABS; PC; PA;TPE Hours worked: 73 612 h (October 2022) No robot included...
1999 | 300044657 | BATTENFELD-CINCINNATI
More information
Injection molding machine up to 250 T . 2 units available, price for unit. ...
2009 | 300044728 | ENGEL
More information
Injection moulding machine for food and beverages caps. Husky closure machine Hylectric 300 RS 80/70 from 2004 Clamp force: 3000kN Tiebar spacing (HxV): 780 x 780 mm Max height of mould 775 mm Min. height of mould 400 mm Max pressure 180 bar Space for mould 780 x 780 mm Diameter of the screw 70mm Speed ...
2004 | 300045132 | HUSKY
More information
Injection molding machine from 1000 T. Machine manuals available CE certified To be sold without robot A test can be carried out working hours: 107.000 Overhauled machine, fully checked and with warranty (ask for more information) Further additional options can be installed on request (a...
2003 | 300045399 | KRAUSS MAFFEI
More information
Injection moulding machine for PET preforms. Husky GL300 PET P100/110 E120 injection molding machine for preforms, year 2001 Includes: - Piovan T5000 IX hopper, year 2002 - Piovan DS528 resin dryer, year 2002 - Soft Drop MB Conveyors, year 2005 - CPT SD MB Conveyors, year 2005 - Cool Jet It ...
2001 | 300045650 | HUSKY
More information
Injection moulding machine for PET preforms. Complete injection molding system for production of PET preforms HUSKY GL300PET P100/120 E100, year 1998 -Injection Unit: P100/120 E100 -Clamping Unit: GL300PET The line includes: Dryer : AEC WHITLOCK Chiller : ...
1998 | 300033782 | HUSKY
More information
Injection molding machine from 250 T up to 500 T . Robot Srar CSE-1400 Euromap: IMM-67, Handling - 67 Year: 2011....
2004 | 300045602 | SANDRETTO
More information
Injection molding machine from 250 T up to 500 T . Max. injection distance: 225 mm Injection pressure (at 400 ºC): 1946 bar Net weight (without oil): 8.000 kg working hours: 90.000 - 100.000 EUROMAP 6 CE certified The machine is currently disconnected. It has been out of service for about 2 years. ...
2004 | 300045783 | ERGOTECH SYSTEM DEMAG ERGOTECH
More information
Injection molding machine from 250 T up to 500 T . BI-INJECTION MOLDING MACHINE Battenfeld HM 400/2250/750S Year of production: 2011 Control system: Unilog B6S injection unit: .../2250/750 Screw diameter: 65/45 mm Specific injection pressure: 2070/2116 bar Injection volume: 1078/358 ccm Injection ...
2011 | 300045947 | BATTENFELD-CINCINNATI
More information
Injection Moulding Machine for elastomers/LSR. Main Group used (as new ) automatic rotary machine for the injection/casting of tpu soles . mod. Pegasus 8 station ( 4 pairs ) single colour. Machine as new, only 60 items produced for trial. Can be shown working. ...
2003 | 300043655 | MAIN GROUP
More information
Injection molding machine up to 250 T . 165628022 cykli (September 2022) Used Materials PP; ABS; PC; SEBS; TPE No robot included...
1998 | 300044802 | BATTENFELD
More information
Injection moulding machine for PET preforms. Netstal Synergy 1500 460/60 injection molding machine for preforms, year 1999 Working hours: 33.000 No auxiliaries or mold included Netstal PLC and control systems Dismantled and available immediately! ...
1999 | 300044989 | NETSTAL
More information
Heating and cooling unit for moulds and dies. Oven for PEX-A production Upgraded in 2014 and just used for tests. 3x400V 50Hz without Neutral 140kW Heating power 128kW Speed 2-20m/min Height 4100mm Width 2300mm Depth 1350mm 8 Heating channels 1 Heating channel is composed of 4 IR lights,4 kW...
2000 | 300045114 | IPT
More information
Injection molding machine up to 250 T . Robot WITTMANN - WP80...
1998 | 300045441 | ARBURG
More information
Injection molding machine from 250 T up to 500 T . Robot Wittmann W828S-0274 (2012)...
1995 | 300045442 | DEMAG
More information
Injection molding machine from 250 T up to 500 T . Robot: Star CSE-1700 Euromap: IMM-12, Handling - 67 Year: 2009....
2004 | 300045603 | SANDRETTO
More information
Injection molding machine up to 250 T . Working hours: 80 726 (May 2023)....
2004 | 300045600 | DONGSHIN
More information
Injection molding machine up to 250 T . Working hours: 104 366 (May 2023)....
2004 | 300045599 | DONGSHIN
More information
Injection molding machine from 1000 T. Almost no working hours...
2007 | 300043074 | CHEN HSONG
More information
Robot. Payload: 90kg Supplementary load: 120kg Total distributed load: 210kg Number of axes: 6 Controller: KRC2 Drive system electromechanical, with brushless AC servomotors....
2001 | 300045013 | KUKA ROBOTER GMBH
More information