Extrusion Blow Moulding machines from 10 L. Complete line with Coex Blow Molding machine for 5 liter jerrycans with view stripe EBM Uniloy UMS 500D Coex-3 Extruder 1: 100-24D Extruder 2: 70-24D Extruder 3: 70-24D Extruder 4: 30-25D for view stripe Die-head 3 parison : Müller S3/160-270 P-P...
2011 | 300048220 | UNILOY
More information
Single screw repelletizing line. Working hours: 5188 (in June 2025) Fimic Laser Filter – RAS 500 included Material to be processed : Film of LDPE, LLDPE and HDPE including agricultural film, MFI (190/2,16)=0,8 - 2g/10min washed post-consumer waste, clean (without PVC and paper, abr...
2023 | 300048196 | STARLINGER
More information
Complete Non-carbonated Aseptic Filling Line for drinks. Krones VODM aseptic filling line, year 2010 Output: 20.000 bph (18.000 bph with CSD) Products: Carbonated and flat soft drinks, isotonic and sports drinks. Neck: PCO 1881 Includes: Krones AquaDos water treatment system Krones Aquaasept aseptic pr...
2010 | 300048766 | KRONES
More information
Injection stretch blow moulding machines for PET bottles. Used injection stretch blow molding machine Model: Nissei 70 DPH V4 Hours: 34.000 Machine only, no dryer, hopper Very good condition and available immediately! ...
2018 | 300048049 | NISSEI ASB
More information
Air Compressors (High Pressure). Used oil free compressor Atelier François Model: L5B Air Flow: 1630 m3/h Working hours: 30.037 24/06/2025 Power: 280Kw Speed: 490 rpm Pressure: 40 bar Dryer: Hankison Chiller: not available Air Tank: 500lt machine installed ...
2018 | 300048767 | ATELIER FRANÇOIS
More information
Pouch making machine. Pouch machine for Bottom Film Folded type of Stand-Up (2-Up) and (1-Up) Unwind & Gusset Punch Section 1- W1600 mm Main Unwind Unit 2- 3" Pneumatic Shaft (for W1600 unwinder) 4- 6" Air Chuck for 3" Pneumatic Shaft and Inflator Tool 1- Dancer Unit 1-...
2022 | 300049054 | TOTANI
More information
Thermoformer. Automatic thermoforming machine with additional punching press Max external tool size 780x570mm Max tool size with pneumatic clamp frame 750x570 mm Platens clamping force of the forming unit 300 kN Platens clamping force of the hole punching unit 6...
2019 | 300049066 | W.M. WRAPPING MACHINERY SA
More information
Coextrusion lines. Line installed in 2021 Kind of production Stretch and shrink hood, collation shrink and courier bags Film thickness min. and max 15 - 180 micron - without gussets 50-120 micron with gusset (stretch hood film) Max bubble circumference 5400 MM Gravi...
2019 | 300049112 | MACCHI
More information
Coextrusion lines. 9-layer coextrusion line VAREX II for the production of barrier film & stretch hoods with Filmatic S II double winder, in combination with ISP module Installed melting capacity approx. 2050 kg/h Min working width. 1.560 mm Line speed max. 120 m/min ...
2020 | 300048355 | WINDMÖLLER & HÖLSCHER
More information
Single screw repelletizing line. Output: Up to 650 kg/h, depending on the type of material and feeding rate Conveyor belt FB 7000 1100 SH Double layer Metal Detector Intarema Process Combination: I 1310 TVEplus Control package Intarema -automatic load detector -load control cutter/c...
2015 | 300046400 | EREMA
More information
Core cutting machine. Core Saving and cutting machine – Full automatic Included : -Core saving and cutting machine model TCSG300/400: equipped with cutting station, double vacuum system, “Siemens” plc and controls by touch screen. PP Cutting system included. Automatic di...
2017 | 300048337 | GAVO MECCANICA
More information
Sheet coextrusion lines. Complete co-extrusion line A+B+A for the production of R-PET sheet, Useful width max. 800 ÷ 1100 mm, Finished material: rigid co-extruded sheet in PET rewound in rolls Feed material: virgin + flakes + thermoforming skeleton/regrind + trims Extrude...
2022 | 300048865 | UNION
More information
Co-kneader extruder. Production data: The line BUSS COMPEO BCC 88-25 MT-0 is designed for producing the following types of masterbatch compounds, with a typical output of: Black Masterbatch based on HDPE with up to 40% of CB: 750 – 850 kg/h Black Masterbatch based on LDP...
2022 | 300048847 | BUSS
More information
Double-shaft film slitter-rewinders. Duplex Turret Slitter Rewinder Materials: plastics, papers, laminates Material thickness: 12 - 300 μm Finished roll weights: max. 680 kg (distributed to both axles) Web guide system: FIFE with edge/line sensor SE-46C Set of unwinding chuck: 76/152 mm...
2017 | 300049108 | BIMEC
More information
Air Compressors (High Pressure). Atelier François AF M2A high-pressure compressor, year 2020 Air delivery: 225 m3/h Speed: 660 rpm Hours worked: 3722 (Sep 2025) Includes: - Chiller - Reception tank (150 litres) Available immediately! It can be run in dry cycle. ...
2020 | 300049185 | ATELIER FRANÇOIS
More information
Stretch blow moulding machines. Sipa SFL 4/3 XL WM linear blow molding machine for jars Year of manufacture: 2015 With preform hopper and unscrambler 3 cavities and can be used for a wide range of jars Hardly used, very few hours In excellent condition and available immediatel...
2015 | 300042342 | SIPA
More information
Printing machines for food and beverages caps. TAMPOPRINT printing machine 3 colors in 1 lane Type of ink: Solvent-based ink 28mm caps 45.000 caps per hour Machine was never used in production, only commissioned Available immediately...
2019 | 300043654 | TAMPOPRINT
More information
8 Colours CI Flexo Printing Machines. Materials : LDPE : 20-150 microns LLDPE : 12-100 microns HDPE : 20-150 microns BOPP : 12-60 microns PET : 12-50 microns Paper : 40-120 gr Printing possibilities : 7 Offset units and 1 flexo unit Inks : Electro Beam Printing speed : up to 300 m/min ...
2014 | 300045724 | COMEXI
More information
Complete PET filling line for still water. Bosch PET Bottling line for water Machine design Line Speed: 16,000 Bottle /Hour (8000bph+8000bph) -2 x Combi machines (Blower, Filler & Sealer) -Machine speed: 8000 BPH each -Preform (For 200ml, 150ml & 100ml): Flat Neck 6.39gm -Sealing Thermosea...
2018 | 300046517 | BOSCH
More information
Single-shaft film slitter-rewinders. Min-max width of mother reel: 600-1420mm Max. mother reel diameter: 1500mm Max mother reel weight: 2500Kg Max unwinder tension: 600N Min. cutting width: 100mm Max. winding width: 1400mm Max. winding diameter: 1050mm Max winding weight : Shaft diamete...
2022 | 300046811 | DCM
More information
Label Screen Printing machines. Material 340 mm Dimensions max 330 x 350 mm Unwinder 4 Screen colours 1 Flat hot foil 1 Semi-rotary Hot Foil 1 semi-rotary die cut 1 Rewinder + slitting ...
2013 | 300046833 | BERRA
More information
Independent Rewind Stations Film Slitter-Rewinder. Installed 2016 Materials Films (BOPP,PET,PE,BOPA): 12-100 my Laminated: 40-400 my APET/ APET+PE 150-600 my 6 '' shaftless unwinder Assisted knife and counter-knife positioning Min. parent reel width 600 mm 4 winding stations 3 and 6'' winder cores...
2015 | 300046883 | LAEM
More information
Shrink extrusion line. Mono oriented PET-G / PVC Shrink Film Production Line This line dones not have an extrusion unti, it is a roll to roll unit Thickness of incoming film: 50 – 440 μm Cast film width (depending of raw material): 811 – 2.160 mm Film thickness: 20 – 80 ...
2021 | 300044579 | BRÜCKNER
More information
Complete plant (Woven sack making machines). Tape Stretching Line starEX 1600 PF for the processing of PET tapes for big bags with PET granulates or rPET in granulate or flake form Extruder Working hours 4000 SSP Working Hours 6678 Die width 1710mm Line consisting of the next elements (can ...
2019 | 300047419 | STARLINGER
More information
Homogenizer. Process Scale Homogenizer Panther 1500 (CE) Brand: GEA Year: 2022 Running hours: around 300 Capacity: 50 l/h Pressure: 1500 bar Includes: - Spare Parts Set - Heat Exchanger - IKA T-50 high shear mixer Dimensions: 1255 x 885 x 1180 mm Weight...
2022 | 300047522 | GEA
More information
Single screw repelletizing line. The machine is running 24/5 and is well maintained. Working hours : 16170 (15/10/24) Complete line consisting of: Conveyor Belt Double Layer All Metal Detector Reel Feeder Device Erema Air flush Technology + on/off for dosing of CaCo3 Processing Com...
2013 | 300047753 | EREMA
More information
Extrusion lines for multifilaments. Multifilament polypropylene HT yarn production line Yarn range: 165-4400 dtex Number of winders: 4 Extruder output (max.): 160 kg/h (depending on yarn specification) Screw diameter: 75 mm L/D: 28 Production workshop: 300-500 m2 Operators required:...
2021 | 300047761 | SML
More information
Pallet wrapper. Pallet Wrapper Brand: Technowrapp Model: P60+TP Year: 2018 Machine in running condition and available immediately! ...
2018 | 300047711 | TECHNOWRAPP
More information
Shredder. Material : PE Lumps, Pipes & Cuttings Material size: Has to be in accordance to cutting chamber dimensions (450 x 500 mm) of the shredder Material characteristics: Free of foreign objects Material feed: Manual Screen size: 50mm Infeed hopper op...
2024 | 300048127 | WEIMA
More information
Air Compressors (High Pressure). Used compressor (high pressure) for PET Bottles Brand: Siad Model: Tempo 2 950 Year 2010 Cooling Tower: Not included Air dryer: MTA DE 235 HP Air Tank: Not included Working hours: 21.706 h Machine in working conditions...
2010 | 300048218 | SIAD
More information
Stretch blow moulding machines. SIDEL Blow Molding Machine SBO 18/16 Universal Manufacturing Year 2013 Capacity: 36,000 Bph and speed upgrade to 39,600 Bphfor size 600 ml. 22,000 Bphfor size 1,500 ml PET bottle min 600 ml, max 1500 ml - Neck finish 29/25 for water bottle ...
2013 | 300048223 | SIDEL
More information
8 Colours CI Flexo Printing Machines. Mechanical speed: 450m/min Inks: solvent and water based Material width min/max: 500 - 1050 mm Printable materials and thickness: LDPE: 30-100 mic BOPP/PET/PE/BOPA: 12-100 mic PP CAST: 25-100 mic Automatic turret unwinder/rewinder: Max. unwinding/...
2010 | 300048490 | UTECO
More information
Single screw repelletizing line. Material : LLDPE, LDPE, HDPE, PP LDPE screw refurbished Another screw for PP and die plate for PP are included Belt conveyor Double layer all metal detector Intarema process combination Extruder motor : 132 kW Process utility supervision Erema air f...
2019 | 300048594 | EREMA
More information
Stretch blow moulding machines. Kosme KSB 4RG Synchro from 2020 4 cavity kosme blow molding Includes:1 set of 1 gallon molds Like brand new and well maintained. Can be seen running 6700 hours...
2020 | 300048691 | KOSME
More information
Complete Can filling lines. Complete can filling line from EKTAM Line was originally designed for 10’000 of 0,5l can per hour Later it was upgrade till 12’000 of 0,5l can per hour There is format part for 0,5l cans as well as for 0,45l cans The line includes: AUTOMATIC CAN D...
2018 | 300048804 | EKTAM
More information
Tapes printing machines. Max. roll diameter in the unwinder: 400 mm Max. roll diameter in the rewinder: 350 mm Printing repeat: up to 369 mm Unwinder shaft diameter: 76,5 mm (3”) Rewinder shaft diameter: 76,5 mm (3”) Drying system: hot air Ink types: Solvent, Alcohol, Water ...
2017 | 300048899 | SIAT
More information
Injection stretch blow moulding machines for PET bottles. Nissei ASB 150 DP Injection stretch blow moulding machine Includes Dryer 16 cavity mold Working hours: 7.000 Machine is in perfect working condition and available immediately! ...
2017 | 300048887 | NISSEI ASB
More information
Injection moulding machine for PET preforms. Used Husky IMM for PET preforms from 2015 Model:Hypet 400 HPP 4.0 P120/130 EE140 56.000 hours Includes: Dryer Dehumidifier Conveyor No hot runner included In very good condition, in production and available immediately! ...
2015 | 300048967 | HUSKY
More information
Monobloc rinser filler capper. TRIBLOC isobaric filling line (Rinser - filler - capper) KOSME for PET bottles, year 2012 Model: Isoblock NH 20/960 1T UP + 20/960 5/240 FC Only 4000 hours of use Bottle sizes: Volume: 250 ml a 1.5 L Capacity: 5.500 bph Rinser stations: 20 Filling ...
2012 | 300049003 | KOSME
More information
Tapes printing machines. Max. O.D. unwinder: 400 mm Max. O.D. rewinder: 300 mm Repeat 150,7 - 502,6 mm Max. speed: 160 m/min Tape core diameter: 3" = 75 mm Primer Station: (for tape printing preparing) - Ventilation & Suction system - Pressure roller Release Station: (for...
2022 | 300049072 | SIAT
More information
8 Colours CI Flexo Printing Machines. Mechanical speed: max. 500 m/min Solvent based inks Materials to be printed: PP; BOPP; LDPE; CPP; HDPE; PET; OPA Tension range: 2-36 kg Automatic Turret unwinder: max. diameter 1000 mm Automatic Turret winder: max. diameter 1000 mm Edge guide Kambero...
2019 | 300049110 | UTECO
More information
8 Colours CI Flexo Printing Machines. Maximum speed: approx. 300 m/min Printable substrates and thickness ranges: LDPE, PP, PA: 20–150 my HDPE, OPP: 12–100 my Laminates: approx. 120–150 my Paper: 30–120 g/m² ALU (soft, hard): from 10 my Unwind/rewind: non-stop (automatic reel change) s...
2002 | 300049177 | WINDMÖLLER & HÖLSCHER
More information
Stretch blow moulding machines. SIDEL SBO6 Universal Eco2 blow moulding machine. Year 2014. In production. 58.000 hours of operation. Neck 28 mm. PCO 1881 Includes: -Blower -Preform turner and orienter -Hopper and preforms elevator -Uninterruptible power supply (UPS) -460 V to 40...
2014 | 300049173 | SIDEL
More information
Accumulation Head Extrusion blow moulding machine. Closing force: 200 kN Head capacity: 2,2 kg Cycle time: 45 s MOOG parison thickness control 400 points Deflashing unit Leak tester Convoyer belts for bottles and for flashes Included: mould for PC botlles with handle; 15/19/20 lt...
2020 | 300044777 | AUTOMA
More information
Cup Form-Fill & Seal machines. Cup form, fill and seal machine Illig FS37, year 2019 for cream cheese APET container with ALU lid materials Output: 12,000 packs per hour. Volume: 35 g Cup size: 135 x 51 x 23 mm Cups with two compartiments: breadstick & cream cheese Maximum f...
2019 | 300044762 | ILLIG
More information
Bottom weld bags on the roll. Automatic line for producing bottom weld bags in continuous, packed in rolls with paperboard core Max. roll width: mm. 250 Processable film: Polyethylene/BIO Max. film thickness: HDPE 8/25 micron LDPE 15/40 micron BIO 12/50 micron Motorized reel ...
2020 | 300045255 | MOBERT
More information
Injection molding machine up to 250 T . Shuttle table stroke 650mm Weight on shuttle table (Max): 240Kg Vertical, never used only 5 working hours....
2019 | 300045837 | ARBURG
More information
Injection Moulding Machine for elastomers/LSR. Formerly: ELECTROMODUL BASE MODEL SPECIFICATIONS • 250 T. hydraulic presses with adjustable stroke; • Extrusion injection machines, activated by electric motors • Screw-piston units; • Rotating head 0÷90°; • Tender carriages; • Built-in hydraul...
2019 | 300046468 | CDG
More information
Tubes printing machines. ISIMAT Hybrid machine 1.Five flexo stations. 2.Three screen printing stations. 3.One tooling diameter 50 mm included in the price (optional additional tooling for diameters 19, 25, 30, 35, 40, price on request). Output: 100 tubes/min...
2015 | 300046697 | ISIMAT
More information
Extrusion Blow Moulding machines from 10 L. Clamping force 35 ton Max mould dimensions: 1290 /2x180 /480 mm Carriage stroke: 1300 mm Opening stroke 380 mm Motor drive 145 kW Heating power (6 zones): 50,3 kW Average consumption 102 kW...
2018 | 300046900 | MAGIC
More information
Bag filling machine. Used vertical flow packaging machine for food pieces - Brand: Mondialpack (made in Italy) - model: MV 100 large - Year of manufacture: 2019 - Main technical specifications:1800 pack per hour - Condition: used only few hours for tests Machine immedi...
2019 | 300047198 | MONDIALPACK
More information
Injection moulding machine for PET preforms. SIPA PPS-300 complete system Includes: - Injection machine for preforms SIPA PPS-300 - Hopper & Dryer PIOVAN 2012 - Dehumidifier PIOVAN 2012 - Transformer - Dry Air Generator & Vacuum Loader Piovan 2012 - Soft Drop MB Conveyors SOFT COMP06 2012 - C...
2012 | 300044325 | SIPA
More information
8 Colours CI Flexo Printing Machines. PROCESSED MATERIAL: LD PE : 0.020 – 0.160 mm HD PE / OPP : 0.010 – 0.150 mm CPP : 0.020 – 0.070 mm BOPP : 0.010 – 0.060 mm PET : 0.012 – 0.050 mm OPA : 0.015 – 0.050 mm Laminates : 0.020 – 0.150 mm Paper : 25 – 180 gsm Max. mechanical speed ...
2015 | 300044549 | SOMA
More information
Stretch film extrusion line. 5 layers stretch extrusion line with 4 extruders IR heating system for the melt pipes Diameter extruders 1x120 mm 1x 80 mm 2x 55 mm Doteco Adroid Grado gravimetric system 2 components Automatic thickness control system High speed pack for achievi...
2018 | 300047787 | COLINES
More information
Sheet coextrusion lines. Produces APET, RPET film Layer configuration: ABA Gravimetric dosing system, 2 components per each extruder Main extruder Extruder EA100/52D with Gear pump and screen changer Auxiliary extruder EA 48 Extrusion die width 1390 mm, Total melt outlet ...
2019 | 300046385 | AMUT
More information
Complete Non-carbonated Hot-Fill Line for drinks. KHS Innofill PET DRV hot fill line from 2017 Line includes the following: 1.Blower, KHS - InnoPET BloFill, neck size: 1881, Cavities: 6, Included: moulds, preform feed unit, preform box tipper, chiller 2.AF compressor, model:CE 24 B, pressure:40...
2017 | 300045941 | KHS
More information
Screen changer for extruders. Automatic Band Melt-Filter Screen area capacity: 260 x 220 mm Accumulator: 7 Litre Electric power input: 57 KW Max. Pressure: 200 bar Operating temperature: max. 270°C Cooling water: Pressure: 3 — 4 bar Temperature: max. 15°C Cooling water qu...
2018 | 300046238 | BRITAS
More information
Single screw repelletizing line. Intarema 1007 TVEplus eco save with Laser Filter. (installed on 10/2017) Bought from UMAC (EREMA) – completely refurbished in 2020. Screw and barrel regularly measured. Output: up to 350 kg/h, depending on the type of material and feeding rate. In...
2016 | 300047988 | EREMA
More information
Rotary compression moulding press. Sacmi complete system for closures CCM80SA 80 cavities, 1500 caps/min. Includes: SACMI Inspection System Camera CVS052B Cooling System Pesce- Sorter SACMI- Closing Cooling Control System Jet-Stream SACMI- Security conveyor cutting and folding syste...
2013 | 300047809 | SACMI
More information
Packaging machine. Used carton packaging machine Bondani FI-100 Year 2019 Installed after TBA8 1000 Square filling machine Configuration: 2x3 In working condition till April 2025...
2019 | 300048132 | BONDANI
More information
Paper bag making machines. Servo controlled bag making machine with flat handle unit, designed to manufacture block bottom, self-opening square bag with photocell device for pre printed master paper Bag width min-max: 180-460 mm Bag width min-max: 150-460 mm (without handles)...
2016 | 300048157 | NEWLONG
More information
Complete Non-carbonated Aseptic Filling Line for drinks. Krones PET aseptic filling line from 2010 Volumes 300ml, 500ml, 1L Neck 28mm For low and high acidic products Krones blowing machine Contiform S20 Krones Aseptic Filling/Capping machine Stork sterilizer / homogenizer Steam generator Air compres...
2010 | 300048243 | KRONES
More information
Cup Fill & Seal machines. Used filler for yogurt, creams, soups, marmalade, paté Brand: Tecnomec (made in Italy) Model: Monoblocco SB81/CS-A Year: 2016 Formats: 125 ml or 250 ml Diamater of the cup/jar: 72 mm Induction Capper: Mr.Ro MR/GST 2K Production: 800 cups per hour ...
2016 | 300048319 | TECNOMEC
More information
Injection molding machine up to 250 T . Working hours = +/- 24.000 (10.02.23) Robot WITTMANN W818 full eletric 2000mm Z, 1200 Y, 620 X (price on request)...
2017 | 300044456 | ZHAFIR
More information
Film coating plant. Coater H300 with 3-color printing station Roller height : 340mm Maximum coating height : 300mm Useful oven drying height : 300mm Maximum mechanical speed : 250mt/min Min working speed : 5m/min Maximum working speed : 220m/min Material pull : 5 to 25K...
2019 | 300048430 | BIESSSE
More information
Stretch blow moulding machines. Sidel SBO 8 Universal HR stretch blow moulding machine Suitable for hot fill products and CSD Included empty bottle packer and AF high pressure compressor and air conveyors Capacity: 11.500 bph for 300 ml CSD bottle 16 gr Working hours: 44.000 I...
2011 | 300046066 | SIDEL
More information
Complete Non-carbonated Aseptic Filling Line for drinks. Aseptic filling line KHS AF 40-10 123 from 2007 Product: Juices, Tea and NON carbonated soft drinks Capacity/ Output: 15000BPH @500ml. Current capacity 10,000BPH Format bottles: 330ml to 1.5L PET Bottles. Closures: 28 mm PCO 1810 Labeling machine...
2007 | 300048522 | KHS
More information
Bottom weld bags on the roll. Bag type: Bottom sealed garbage bag/ star seal Mother roll width: 1400 mm Mother roll diameter: 800 mm Bag width: min. 300 mm; max. 850 mm Thickness from 6 to 40 my Side gusseting: 350 mm Photoelectric cell control Taping unit PLC: Allen-Bradley Ava...
2016 | 300048639 | ROLLOMATIC
More information
Air Compressors (High Pressure). Used oil free compressor Siad Tempo 2 Air Flow: 450m2/h working hours: 25.223 (11.347h on charge) included airtank, MTA dryer and chiller machine installed and in working conditions till october 2025 ...
2015 | 300048735 | SIAD
More information
Pouch making machine. Ideal for short-run, high-quality production. Quick changeovers – Tool-less design and recipe memory for fast setup. Low waste – Integrated ramp speed control reduces scrap during startup. User-friendly touchscreen (HMI) – Simple interface with recip...
2019 | 300048776 | KARVILLE
More information
Injection moulding machine for PET preforms. Used Krauss Maffei injection molding machine for preforms Year: 2006 Hours: 74.000 Includes: Piovan dryer and silo Dehumidifier Robot Hot runner 24 cav Cold Half: 2 sets of cold half plates Spare parts available Available immediately! ...
2006 | 300048868 | KRAUSS MAFFEI
More information
Injection stretch blow moulding machines for PET bottles. Injection molding machine Nissei ASB 50MB, year 2009 Included: - Dryer - Auto loader Injection Clamping force: 60 kN. Screw diameter: 44 mm. Cavity Number: 1-6 . Capacity max.: 0,03 l- 2,5 . Thread Diameter max.: 17 - 63 mm. Neck Diameter max.: 15...
2009 | 300048838 | NISSEI ASB
More information
Bag filling machine. Rotary forming, filling, and sealing machine LAUDENBERG FBM 22 Contruction year 2009 Filling and sealing flat or stand-up pouches from the roll—also with resealable systems. Product packed: grated mozzarella cheese 200 gr but can be used also for...
2009 | 300048906 | LAUDENBERG
More information
Bi-Injection moulding machine. Working hours 14.000 Includes: Robot ENGEL VIPER 40 - RC300 integrated ENGEL conveyor FB100 Injection unit 1 Screw diam. 70 LD 22 Heating zones 6 Heating power 45 kW Screw stroke 390 mm Max. Injection capacity 1501 cm3 Screw speed 205 min-1 Scre...
2018 | 300044094 | ENGEL
More information
Metallizer. Material film thickness: - BOPP: 12-50 μm - CPP: 20-60 μm - HDPE: 25-60 μm - LDPE: 25-60 μm - PA (Nylon): 12-25 μm - PET: 8-25 μm - PVC, unplasticized: 20-60 μm Vacuum: - Working pressure: approx. 4x10-4 mbar - Pumping time: <6 minutes (dry, clean,...
2010 | 300048989 | TOP MET
More information
Complete filling lines for carbonated drinks. Products: Carbonates Soft Drinks Bottle type (basic): from 0.5 l to 2.0 l volume PET closing type: PP screw-cap 28 PCO Labels: Plastic Roll fed Package format: 500ml / 24pack shrink film, 1500ml/ 6pack shrink film Tray: Euro-type Line capacity...
2010 | 300049002 | KOSME
More information
Thermoformer. Thermoforming machine type FC 1000 E with electric drive (forming by vacuum-pressure, in-mould punching system, cut-in-place, counting and stacking), consisting of: Automatic sheet unwinder. Toothed chain conveyors for sheet transport up to the sta...
2007 | 300049004 | W.M. WRAPPING MACHINERY SA
More information
Coextrusion lines. 3-Layer Co-Extrusion System Extruder screws 60/90/60 LD 30 Dosing units for each extruder Main Comp. / 3 Side Comp. EVOLUTION 120/500-3 Die Head with 450 mm die insert, inner gap heating, die gap: 1.7–2.5 mm (decompressive), with IBC High Capacity A...
2013 | 300048943 | REIFENHAUSER
More information
8 Colours CI Flexo Printing Machines. Printing machine with GPS smart mounter system Solvent-based inks Automatic double unwinder and rewinder, max. reel diameter 1020 mm. 8 anilox rollers. 10 sets of sleeves (to be defined). Adapters Ø117 and Ø159 for plate mounter. BST 100% camera and ...
2011 | 300049009 | FISCHER & KRECKE
More information
Stretch blow moulding machines. PET stretch blowing machine TEREKAS FlexBlow1 construction year 2016 1 Cavity Operating capacity: 20.2 million bottles Product-specific parts for the following threads: 24/ 410 25 mm snap-on 28/ 410 28 mm ROPP 38SP400 38 mm 2-start 38 mm 3-start 53...
2016 | 300049010 | TEREKAS
More information
Injection moulding machine for food and beverages caps. Netstal Elion 4200-2900 for closures Year 2017 Hot runner 96 cavities included No auxiliaries, machine only In excellent condition and available immediately!...
2017 | 300048858 | NETSTAL
More information
Extrusion Blow Moulding machines up to 10L. ...
2003 | 300049163 | MAGIC
More information
Capping machine for glass bottles. NORTAN capsule applicator, UNICAP 35 from 2000 Suitable for tinfoil, aluminium and thermocapsules for wine bottles Bottle sizes from 0.2 cl to 1 litre The maximum dimension for processing the bottle cap is 35x 90 mm. output t is variably adjusta...
2000 | 300039446 | NORTAN
More information
Air Compressors (High Pressure). ATLAS COPCO Air Compressor 2008 Type: Oil Free Reciprocating Booster Min/Max Inlet Pressure: 5.5*/ 9.7 bar Maximum Working Pressure: Up to 42 bar Performance NI/s: NI/s 401, Nm3/h 1444 Running Power KW: 90 KW at 415 V, 50 Hz, 3ph Made in Eur...
2008 | 300042089 | ATLAS COPCO
More information
Digital printing machines. Digital label printer 7 colors CMYK OV + 333mm double white Unwinding and rewinding module Automatic cleaning and sealing unit Automatic head adjustment (micromotors) CMYK OV+ double white inkjet module (600 dpi, 50 m/min (7 colors) or 70m/min (6 col...
2019 | 300046510 | DOMINO
More information
Pouch making machine. Bag making machine for: 3 side seal bags Standup zipper bags 4 side seal bags Processing Width 210- 610 mm Reel Diameter 1000 mm or Up to 700 Kg. Top and bottom gusset can be welded with register...
2021 | 300046637 | MAMATA
More information
Digital printing machines. Digital label printer 6 colors YMCK + double white Unwinding and rewinding module Web cleaning Teknek type C2 FMS web guide Led pinning phoseon head 1 Led pinning phoseon head 2 Vetaphone corona plus type VE1A-A(C4)410 Chiller SMC Water heater reg...
2018 | 300046657 | DOMINO
More information
Carton erecting machine. Carton erecting machine Ixapack, year 2019 Speed: 8.000 cups/h 0,5 Kg 95mm diameter Included: Feeding Conveyors X-Ray inspector double lane weight control Feedeng conveyors for cases Overwrapper doble Top Load 4 deltas (4 robots delta type) Long Na...
2019 | 300046644 | IXAPACK
More information
T-Shirt flat bag making machine. High performance making line for the production of disposable gloves/ T-shirt bags (bio ready) T-shirt bags production Possible bag widths 170-410 mm Mechanical speed without material 285 cpm Glove production Mechanical speed without material 175 ...
2021 | 300046674 | LEMO
More information
Extrusion line for PE/PP pipes. SECOND EXTRUDER FOR PROTECTIVE LAYER (PP): Manufacturer: Krauss Maffei Model: KME 45-30 Year: 2015 Screw diameter (mm): 45 Screw L/D ratio: 30 Output capacity (kg/h): 300 Main drive power (kW): 56 Screen changer: Yes Running hours: 0 SECOND DIE HEA...
2015 | 300046673 | KRAUSS MAFFEI
More information
Shredder. Cutter form 65x65x28 1x 160kW motor Frequency converter ABB ACS800 Screen perforation diam. 60 mm Climatic conditions 0-35ºC Bosch Rexroth hydraulic unit Inward pressure: 190 bar Outward pressure: 130 bar ...
2019 | 300047201 | LINDNER
More information
Thermoformer. Thermoforming machine Vacuum/air pressure forming and incorporate cutting in place by steel rule, with additional cutting press for separate cutting Max. external tool size mm 780*x570 Max. tool size with pneumatic clamp frame mm 750x570 Platens cla...
2020 | 300047287 | W.M. WRAPPING MACHINERY SA
More information
Air Compressors (High Pressure). Used Compressor Bellis & Morcom Gardner Denver VH 21 H3N FULL LOAD RUNNING HOURS : 11.889 NO LOAD RUNNING HOURS: 6.190 TOTAL RUNNING HOURS: 18.079 YEAR OF MANIFACTURE :2012 Maximum COMPRESSOR SPEED 750 RPM POWER RATING : 260KW COMPRESSOR WEIGHT ...
2012 | 300047365 | BELLIS & MORCOM
More information
Rotary compression moulding press. Sacmi Compression Molding machine from 2016 Includes: Molding press CCM24SB Volumetric compound mixer MDP2 Compound feeder S50 + S55 Jest stream upper air Scoring & Folding SFM 12B Cooling conveyor Nara Alaska mold A27W A27W scoring and folding t...
2016 | 300047689 | SACMI
More information
Thermoformer. For PP cups of 90mm & 95mm diameter (2 moulds negotiable) Forming area max.: 825 x 675 mm Forming area min.: 375 x 350 mm Tool dimensions max.: 850 x 700 mm Tool dimensions max. (block change) :850 x 700 mm Height of formed part above / below film le...
2022 | 300047847 | KIEFEL
More information
Chiller. ...
2013 | 300043733 | MCQUAY
More information
Conveyor. Bottle take out device for a Nissei ASB 12M The conveyor has only a few thousand of hours Made in Japan Production: 400 bph Driving Method: Vertical Movement, Electrical Slider, Forward Backward Movement:Air Cylinder The machine has been dismantlle...
2021 | 300044015 | NISSEI ASB
More information
Stretch blow moulding machines. Blow Molding Machine CHUM POWER CPSB-LSS8-50 Capacity: 7,500bph/130~150ml, and 6,500bph/900~1000ml bottles Molds can be purchased at an additional price. Manuals Included Machine available immediately!...
2019 | 300047921 | CHUM POWER
More information
Extrusion Blow Moulding machines from 10 L. Clamping force 35 ton Max mould dimensions: 1290 /2x180 /480 mm Carriage stroke: 1300 mm Opening stroke 380 mm Motor drive 145 kW Heating power (6 zones): 50,3 kW Average consumption 102 kW...
2018 | 300047975 | MAGIC
More information
Laminators. Max. web width: 1060mm Max. coating width: 1050mm Non stop rewinder Unwinder/rewinder shaft diameter: 76/152mm Reel weight at unwinder/rewinder : 1500kg Web tension (unwinder): 30N to 400N Web tension (rewinder): 40N to 400N Coating grammage: 0.7 to ...
2008 | 300047989 | DCM
More information
Injection moulding machine for PET preforms. Injection moulding machine H-PET230 AE RS95 Year of construction 2015 For 30.3 g and 17.8 g preforms Working cycles 11,583,052 Max. Throughput 390 kg/h PET, max. shot weight 2424 g PET Fully electric clamping unit Movable mould mounting platen ...
2015 | 300047876 | HUSKY
More information
Tetra Pak filling machine. Filling machine Tetra Pak TBA8 Model: TBA8 1000 Year: 1992 Format: 1L Base without cap Machine refurbished by TetraPak in 2021 Machine in working condition till April 2025 Available immediately!...
1992 | 300048128 | TETRA PAK
More information
Injection moulding machine for PET preforms. Injection moulding machine Husky H-PET230 AE RS95 Year of construction 2015 For 29 and 18 gr preforms Working cycles 14,000,000 Max. Throughput 390 kg/h PET, max. shot weight 2424 gr PET Fully electric clamping unit Movable mould mounting pla...
2015 | 300048121 | HUSKY
More information
Single screw repelletizing line. Air cooled Configured trim basket only (feeder for trims) Also Alpha 70 AC available for sale (ref. 300048201), package price can be offered....
2019 | 300048200 | PLASMAC
More information
8 Colours CI Flexo Printing Machines. Max mechanical speed 400 mt/min Solvent base inks Non-stop turret shafted unwinder and rewinder, max diam 1000 mm Reprint system for both sides Register camera Graficontrol 100% RFID system for zero waste Automatic washing system Automatic viscomete...
2023 | 300048205 | TCE CONVERTING
More information
Pouch making machine. High Speed Three Side Seal, Inserted Bottom Gusset Stand-up Pouch, Folded Bottom Gusset with Optional Zipper Pouch Making Machine. Materials: Laminated Films, LDPE, CPP, MCPP, AL, NYLON, PP etc. Pouch width (max.): 250 mm (for pouches with K-seal b...
2019 | 300048245 | ZHOU TAI
More information
Laminators. The machine includes a primary unwinder, a secondary unwinder, an applicator body for solventless adhesives, a bridge with bearings for the passage of the material, a laminator body, a winder & a chiller Compared to a standard machine, the machine h...
2019 | 300043071 | COMEXI
More information
Other Dairy Machine Type. Used Universal Processing System, year 2023 Brand: RoboQBo (Made in Italy) Model: QBO70-4 Bowl capacity: 70 litres Three-phase voltage: 400-220-200V 50/60Hz Max temperature: 120° Max vacuum: -990 mbar Variable speed: 30/2000 rpm Dimensions: L1654 ...
2023 | 300048321 | ROBOQBO
More information
T-Shirt flat bag making machine. Automatic line type SA90HS (high speed) for the production of HDPE/LDPE T-shirt bags with 3 lanes. Max. quantity of bags per pack : 100 (according to the thickness and quality of the film) Stacker on needles positioned at 120mm from the edge of the b...
1999 | 300048328 | ELBA
More information
Injection stretch blow moulding machines for PET bottles. Used Nissei ASB 70 DPH v2 Year: 2005 Dryer: Moretto D 502 Year 2002 Hopper: Moretto TC 100 HP Year 2002 (250 lt) Vacuum Pump: Moretto C 51 HT 53 Year 2002 Working Hours: 71.409 (March 2025) machine running ...
2005 | 300048368 | NISSEI ASB
More information
Rotogravure printing machines. Gravure printing press Dynastar for ultra quick changeovers as right-hand machine configuration. Gravure cylinder face width with W&H standard specification : 900mm Roll diameter max : 800mm Roll weight max : 550kg Core id max : 150/152mm Web tension...
2016 | 300048420 | WINDMÖLLER & HÖLSCHER
More information
Filler for pouches. Aseptic pouch filling line Ecolean EL-6 , year 2021 Filling volume/package sizes: 110ml, 200ml and 250ml Capacity of up to 18,000 packages/hour Working hours: <1,000 hours Includes: Filling machine Cleaning machine Conveyor Straw sealing machin...
2021 | 300048441 | ECOLEAN
More information
Filler for pouches. Aseptic pouch filling line Ecolean EL-6, year 2022 Filling volume/package sizes: 110ml, 200ml and 250ml Capacity of up to 18,000 packages/hour Working hours: <500 hours (Just finish commissioning) Includes: Filling machine Cleaning machine Conv...
2022 | 300048443 | ECOLEAN
More information
Injection molding machine from 250 T up to 500 T . bimetalic screw...
2021 | 300043482 | JSW
More information
Packing machine for glass bottles. Fully automatic packaging system for jars with upstream carton erecting unit (wrap-around trays) Buhmann pac solutions System GmbH Construction year 2016 In addition to the packaging of unmixed cartons, the automatic mixing of offline products (fee...
2016 | 300048584 | BUHMANN
More information
Digital printing machines. Print Method - Dry Toner Electrophotography CMYK [Full Color] Printing Resolution - 1200dpi(3600dpi equivalent) x 1200dpi/8bit Material Width - 330mm Printing Length - 480mm & 1195mm at banner mode Material Thickness - 60 to 250micron Printing Spe...
2020 | 300048622 | KONICA MINOLTA
More information
Coextrusion lines. Gravimetric Batch Blending system Plastcontrol, Main+3 components for each extruder 5-layer Coextruder with 70/70/80/70/70 mm extruders 5-layer die head 5-Z - Q with axial spiral mandrel distributor for die diameters from 300 mm - 650 mm with IBC , d...
2022 | 300048612 | REIFENHAUSER
More information
Injection stretch blow moulding machines for PET bottles. Nissei ASB 50MB V2 Dryer: Shibura Color Dosin Unit: RM Loader Air Conditioner Conveyors: Extra Price: Chiller, Air Compressor, Moulds...
2005 | 300048633 | NISSEI ASB
More information
Stretch blow moulding machines. SIDEL SBO 8/10 Universal Brand: SIDEL Model : SBO 8/10 Universal Year : 2008 Installed Power 254 KW In includes: 1. Hopper 2. Conveyor x2 sets of blow moulds: 300ml and 500ml PCO1881 the machine is installed but not running since a long time...
2008 | 300048634 | SIDEL
More information
Single screw repelletizing line. Nominal output: up to 240 kg/h; current output 130 kg/h Belt conveyor: FB _6000_900_SH Metal detector INTAREMA process combination: I_1006 TVEplus EREMA Backflush filter Hot die face pelletiser: HG_82D Pellet dewatering screen: GS_1510 Water pump sta...
2014 | 300048646 | EREMA
More information
Label flexo printing machines. 6 UV colors 3 die-cutting units Corona treatment Speed: 150 meters/min Web guide Servomotor Cold foil Delam Relam Cross for reverse printing DS SYSTEM register chamber Double register screen Laminator/stamping Magnetic lift crane Pressure blades Magn...
2004 | 300048786 | MARK ANDY
More information
Label flexo printing machines. X-FLEX X6 430 Flexo printing machine for narrow web Materials: - unsupported film (OPP,BOPP) - shrink film (PET, PVC, OPS) - paper (C1S,C2S, etc) - Pressure Sensitive Paper - PS Film - Annealed and Raw Aluminium - Foil - SBS carton - PE coated and L-...
2013 | 300048808 | OMET
More information
T-Shirt flat bag making machine. Automatic welding machine for die-cut and folded shopper bags Dies in stock: 140mm wide and 200mm wide Maximum reel weight: 600 kg Gusset unit Automatic unwinder Autopack device Thicknesses and materials : High and low density polyethylene. Low den...
2005 | 300048820 | ELBA
More information
Paper bag making machines. AM8115DP Tuber Year: 2022 Maximum speed: 500 pieces/minute (maximum cutting length 75 cm (single-page type)); 350 pieces/minute (cutting length starting from 76 cm (double-page type)) Number of bag layers: 3 layers Maximum diameter of material roll: ...
2022 | 300048870 | WINDMÖLLER & HÖLSCHER
More information
Complete plant (Woven sack making machines). The TIRATEX 1600 is an extrusion and stretching line for fabricating polyolefin tapes made of PP. The machine was designed for high output and best tape-quality at high production rates. Production speed: max. 530 m/min Working width: up to 1.600 m...
2016 | 300048883 | WINDMÖLLER & HÖLSCHER
More information
Air Compressors (High Pressure). High-pressure compressor BellissMorcon from 2021 Model: VH7H3N Capacity of 430 m3/h Pressure: 42 bar 90 kW motor Air Flow: 430 m3/h Working hours: approx.. 3564 (July 2025) Includes 3 m3 air buffer tank, dryer, and chiller Available immediately!...
2021 | 300048876 | BELLIS & MORCOM
More information
Other Machines for Drinks. Bottle Top Crystallizer for Preforms Capacity: 16,000 pph Crystallization operation on 1810 Neck preforms Includes: ·Hopper ·Orientor ·Crystallizer ·Air chiller ·Thermoregulator Machine available Immediately! ...
2008 | 300044054 | BOTTLE TOP
More information
Label flexo printing machines. 9 color flexo printing machine Thickness range of printed materials: 25 - 400 microns Each form cylinder is driven by a separate servomotor in each printing station Longitudinal register at 360 degrees Printing speed is variable from 15,24 m/min to ...
2017 | 300048932 | MARK ANDY
More information
Injection molding machine up to 250 T . The machine is permanently located in a clean room. Working hours: 300 – only used for testing purposes. ALLROUNDER 275 V 250 - 70 with rotary table Table diameter: 750 mm Rotary running time 1,7 s Clamping force: max. 250 kN Injection unit: acc. ...
2018 | 300048957 | ARBURG
More information
Other Machines. The automatic fresh pasta production line comprises 5 independent modules: Pasta Sheeter (Sfogliatrice) – Agnelli A-500 (220V) The Agnelli A-500 Sfogliatrice is an industrial pasta roller designed to produce sheets of pasta with a uniform thickness...
2014 | 300048938 | AGNELLI
More information
Digital printing machines. 4-color CMYK printing 24 m/min reel-to-reel – single pass XAAR printheads Corona treatment Web cleaner Cooling plate in the UV oven with its cooling unit. Web width: 250 mm Image width: 210 mm Print resolution: 300 dpi EFI UV inks Windows operating ...
2012 | 300048991 | EFI
More information
Anilox - cylinders and plates washer. The machine that removes the ink from printed film and enables to reuse your start-up film over and over again Able to clean different types of film Cleans all types of water based andsolvent based inks Recycling without any ink The roll of printed ...
2021 | 300049007 | POLYMOUNT
More information
Coextrusion lines. 3-Layer Co-Extrusion line Extruders EVOLUTION 60-30 EVOLUTION 90-30 EVOLUTION 60-30 Dosing units Extruder A: Main Comp. / 3 Side Comp. Extruder B: Main Comp. / 2 Side Comp. Extruder C: Main Comp. / 3 Side Comp. EVOLUTION 120/500-3 Die Head with ...
2016 | 300048947 | REIFENHAUSER
More information
Other Machines. STEFANI AUTOMATIC DOUBLE-SIDED FORMATING & EDGEBENDING LINE consist of: 1. SCM STEFANI EVOLUTION SSB 1 automatic double-sided formating and edgebending machine − clean pack L − anti adhesive unit AAR − crushing unit − automatic milling unit − EVA glu...
2017 | 300049031 | STEFANI
More information
Stretch blow moulding machines. Used Sidel Blower Model: SBO 20/24 Universal Year: 2007 Neck: 38mm for milk and juices Production: 36.000 bph machine in working conditions till October 2025...
2008 | 300049035 | SIDEL
More information
Twin-screw extruder for PVC compounds. Unused, Factory-New Condition – Never Installed PVC Resin Vertical Compounder FEEDING SYSTEM Number of hoppers 3 Mixers Yes Gravimetric Dosing Yes Processed materials: PVC Resin 70 ± 2 Shore A PVC Resin 76 ± 2 Shore A PVC Resin 80 ± 3 Shore A...
2023 | 300049073 | COPERION
More information
Washing plant drier. Mechanical dryer used for processing of dirty or wet plastics, as well as for the separation of impurities, including mixed fraction of pre'crushed plastic packaging. Max size of th material fed: 50x50mm for film fractions 25x25mm for hard plastics. ...
2021 | 300049021 | WIPA
More information
Injection moulding machine for food and beverages caps. HUSKY injection moulding system for closures HL 500 RS 80/65 Construction year 2016 Including hopper PLC Siemens Not including: Moulds, roboter, dryier, cooling system Working hours 45.425 Well maintained by sellers maintenance program Immedia...
2016 | 300049082 | HUSKY
More information
Label sheeter - cross cutting. DIGICON SERIES 3 - Machine to be configured in right to left format. Basic Equipment Comprising Of: Cantilevered Ø800mm unwind module. Pneumatically braked unwind module complete with programmable end of roll slow or stop, automatic tension control, ...
2015 | 300049088 | ABG
More information
Coextrusion lines. Gravimetric dosing system PIOVAN 4 components per extruder Extruders: 65 mm + 80 mm + 65 mm 3 plate screen changer 3 Layer blown film Die head TE5303-IBC-350/500, Die plates available 350 and 500 mm, gap 1,8 mm CR-MAX 3 double-flow cooling ring IBC c...
2012 | 300049131 | MACCHI
More information
Digital printing machines. Web width : 80-240mm Maximum printable width: 222 mm Media thickness: 4 pt/mil to 12 pt/mil (0,1 - 0,3 mm) Digital label printing at 1600 dpi, no print plates High speed printing 6 or 12 ips (8 or 18 metres per minute) Print onto die-cut labels or pl...
2018 | 300049142 | NEW SOLUTION
More information
Coextrusion lines. Three-layer extrusion line for flexible packaging film and agricultural film. Products, Heat-shrinkable film for bottles and cans,,Flexible packaging film,Agricultural mulch film Thicknesses 20 ÷ 200 my Grado Adroit Doteco 4+4+4 gravimetric batch raw...
2020 | 300049130 | BANDERA
More information
T-Shirt flat bag making machine. Machine dimensions : 8350 x 1900 x 2835 Material : HDPE / LDPE / LLDPE Welding width : 800mm Bag length min-max : 300-700mm Bag width max : 2x370mm Film thickness min-max : 15-60 microns No bottom gusseting Side gusseting : depth min-max : 50-100mm O...
2005 | 300044378 | COEMTER
More information
Label flexo printing machines. 2 double-sided cutting stations 1 web turning cross 8 UV printing stations (GEW) 1 trim station 1 film laminating station Printing options: Laminating Roller cooling Servo motorized Delamination Web turning Variable inkjet printing Included: 4 magn...
2004 | 300049176 | MPS
More information
Printing machines for food and beverages caps. Used Tampoprint printer Rotoprint 2-Lanes 3-Colours customized Printing Machine • Material: PP & HDPE • Diameter of caps for printing: 28 mm and 38 mm • Production quantity: 50.000 closure each lane • 3 rotary printing units. • 2 cold air drying...
2017 | 300049178 | TAMPOPRINT
More information
Printing machines for food and beverages caps. Used Tampoprint printer Rotoprint 2-Lanes 3-Colours customized Printing Machine • Material: PP & HDPE • Diameter of caps for printing: 28 mm and 38 mm • Production quantity: 50.000 closure each lane • 3 rotary printing units. • 2 cold air drying...
2019 | 300049179 | TAMPOPRINT
More information
Cast coextrusion lines. Max. speed: 350 m/min No. of layers: 2 x 1 x 2 layers Layer distribution: - D / B / A / C / E : 10 / 15 / 53 / 11 / 11 % or - D / B / A / C / E : 12 / 18 / 50 / 10 / 10 % Control unit: SML - Operating system Dosing units: - Extruder A (core layer)...
2019 | 300049161 | SML
More information
Digital printing machines. Print method: dry-toner electrophotography Full color (CMYK) Materials: Paper; PP; PET Paper width: 330 mm Paper thickness range: 81 to 256 gsm Max. printing image size 1195 x 320 mm Printed image width Max. 320 mm Print speed: max. 24 m/min; Feedin...
2019 | 300049191 | KONICA MINOLTA
More information
Label sheeter - cross cutting. Control de tensión de banda servoaccionado - Corte de precisión para reducir los residuos - Unidad de laminación con un diámetro máximo de 300 mm - Unidad de troquelado semirrotativo y totalmente rotativo - Desarrollo de 2 a 22 pulgadas - Velocidad:...
2019 | 300049190 | GM
More information
Thermoformer. 3 stations : Forming - Cutting - Stacking Min. forming area: 400x250mm Material width min/max: 440-750mm Height above/below film level: 120/40mm Film reel diameter: 1200mm Transport accuracy: +-0.2mm Suction power of the vacuum pump: 200m3/hour Conn...
1999 | 300043300 | ILLIG
More information
Sheet coextrusion lines. 3 and 5 layers sheet extrusion line for laboratory Layer distribution 3 layers CAAAB : C 10%, A 80%, B 10% 5 layers CBABC : C 5%, B 5%, A 80%, B 5%, C 5% Extruders 2x 30/28 and 1x 45/30 Melt pump for layer A Feedblock 3 and 5 layers T-die 450 mm,...
2020 | 300049209 |
More information
Bottom weld bags on the roll. Automatic bag making machine for bottom weld bags on roll with core, with or without gussets 4 lanes with gussets, 5 without Bag width min 100; Max on 4 lanes 280 mm, in 5 lanes 200 mm Diam max roll 180 mm Film thickness: HDPE 10-25 my, LDPE 15-50 m...
2019 | 300040954 | MOBERT
More information
Header/Capper for cosmetic tubes. Header & capper for cosmetic tubes 16 positions The machine heads tubes and puts the caps. 80 tubes/min max (depending on tube size) Tooling for 50 mm diameter included...
2015 | 300041437 | COMBITOOL
More information
Air Compressors (High Pressure). ATLAS COPCO Air Compressor 2009 Type: Oil Free Reciprocating Booster Min/Max Inlet Pressure: 5.5*/ 9.7 Maximum Working Pressure: Up to 42 bar Performance NI/s: NI/s 627, Nm3/h 2257 Running Power KW: 132 KW at 415 V, 50 Hz, 3ph Made in Europe ...
2009 | 300042090 | ATLAS COPCO
More information
Pasteurizer. Plate pasteurizer for wine Tetra Pak Type CS-SR Three stages Production: from 20 to 80 hl x hour Pasteurization from 0 to 80 Cº - 30 seconds PLC: Siemens S7 connected with VPN to remote control Automatic Sterlization The machine in working condi...
2005 | 300042641 | TETRA PAK
More information
Moulds for Preforms. M PET Mold Masters Hot Runner for HUSKY HyPET 120 Year 2013 Perfect condition and available immediately! ...
2014 | 300042892 | MOLD MASTERS
More information
Moulds for Preforms. Husky cold half and robot plate Weight 9.5gr Neck: 26-22.12 P3 Cycle time: 6,7 sec Take out plate included 7.066.300 shots...
2014 | 300043450 | HUSKY
More information
Stretch blow moulding machines. BLOW MOLDING MACHINE SIDEL SBO 6/10 Brand: SIDEL Model: SBO 6/10 Series 1 Year: 1995 Mechanical Speed: 7200 BPH Change Part: 3025 & 2925 neck finish personalization kits Installed Power: 220KW Auxiliary Equipment: - Preform loader, hopper and Unsc...
1995 | 300043461 | SIDEL
More information
Bottle printing machines. An RG3 is a servo-based screen printing machine for decorating plastic hollowware. Actual production speed depends on item shape and image length. Effective output (for 1-color): 3 300 pieces/hour Colour to colour registration Accurate to within ±0....
2018 | 300043801 | ISIMAT
More information
Air Compressors (High Pressure). ATLAS COPCO Air Compressor 2DX2-37-10 from 2015 Type: Oil Free Reciprocating Booster Rated power 27 kW Motor shaft speed 1485 rpm Available immediately! ...
2015 | 300045186 | ATLAS COPCO
More information
CNC machining centers. 5 axes Working area : 920x1400x580 Machine equipped with a spindle capacity 2 tools. Displacements (mm) : X = 920 Y = 1400 Z = 580 A = endless B = endless Maximum 3D working range per table approx. 1000x780x400 Linear motion paths approx. X,Y,Z,...
2002 | 300045343 | HUBER & GRIMME
More information
Haul off for pipes and tubes. ...
2016 | 300045439 | SICA
More information
Other Machines. Two identical machines. Price per machine. 1604-60 spout sealing and vertical insertion machine. The machine is used to weld a spout to a flexible bag. The machine can finish the whole process automatically. The process includes nozzle feeding, nozzl...
2014 | 300045703 | SUN CENTRE MACHINERY CO
More information
Single screw repelletizing line. Installation year 2018 Processed material PET 800-1000 kg/hr Material: Fibres. Origin of material: Industrial waste (recycler) Belt Conveyor FB_10000_1200_SH with Double Layer All Metal Detector INTAREMA® Process Combination 1714_TE Including shock...
2017 | 300045903 | EREMA
More information
8 Colours CI Flexo Printing Machines. Carbon fiber mandrels Maximum mechanical speed: 400m/min Turret type unwinder with automatic changeover Maximum reel diameter on unwinder: 1000 mm Reel-holding shafts: 2 x 3" and 2 x 6" SVECOM shafts Turret type rewinder with atomatic changeover Ree...
2012 | 300046148 | UTECO
More information
CNC machining centers. Axis path / Speed / Acceleration X axis : 2350mm / 180 000mm/min / 15 000 mm/s2 Y axis : 2650mm / 180 000mm/min / 7500 mm/s2 Z axis : 130mm / 70000mm/min / 7000 mm/s2 C axis : 365º / 20880 º/min / 5400 º/s2 Total power requirement: 60,72 kW Maximum...
2016 | 300046197 | GEISS
More information
T-Shirt flat bag making machine. Three lines hot-slitting T-shirt bag making machine, super high speed with fully automatic production. Special design servo-driven bag feeding, easy to operate. Equipped with multi auto alarms with automatic stop design for safety. Independent three ...
2015 | 300046253 | HEMINGSTONE
More information
Label Screen Printing machines. Printing length min 96 mm Printing length max. 192 mm...
2012 | 300042374 | STORK
More information
Pallet wrapper. Used pallet wrapper Robopac Genesis Output: 30 pallets per hour Format: epal and dussedorf Pallet from 1200 x 800 height from 600 to 1800 Pallet from 600 x 800 height from 600 to 1800 Pallet from (600 x 800) + (600 x 800) together, height from 600...
2002 | 300046416 | ROBOPAC
More information
Anilox - cylinders and plates washer. Max. diameter : 230mm Max. washing length : 1700mm Max weight : 200 Kg Number of anilox per washing : 1...
2008 | 300046426 | FLEXO WASH
More information
Label flexo printing machines. Mark Andy Digital One hybrid press using CMYK toner plus basic converting Servo driven unwind with 3 inch core capacity - 30 inch max diameter Web guide Web cleaner 2 servo driven pacing and tension control station 2 advanced dancer systems with re...
2017 | 300046509 | MARK ANDY
More information
Extrusion line for corrugated pipes. Master extruder Manufacturer: Cincinnati Extrusion GMBH Type: PROTON 75/30G Year: 2001 Note: complete with gravimetric output control and N° 1 dosing feeder Plasticolor 2200. Slave extruder Manufacturer: Cincinnati Extrusion GMBH Type: PROTON 60/30G...
2001 | 300046535 | UNICOR
More information
Label sheeter - cross cutting. Unwinder with web guiding system & corona treatment Vetaphone 2 UV flexo stations (If it works with one, the machine works in semi-rotary, but if both are needed, it works in rotary). Semi-rotary die Trim, slitter and rewinder Max web width : 330mm ...
2014 | 300046534 | SMAG
More information
Digital printing machines. Print method: dry-toner electrophotography Full color (CMYK) Materiales: Paper; PP; PET Resolution 1,200 x 1,200 dpi x 8 bit 1,200 x 3,600 dpi equivalent Paper width: 250 to 330 mm Paper thickness range: 81 to 256 gsm Max. printing image size 1195 x ...
2022 | 300046524 | KONICA MINOLTA
More information
Stretch film extrusion line. 5 layers coextrusion cast film line for the production of stretch film for hand, machine and jumbo rolls 3x Doteco Android mudular gravimetric dosing batch system for 2 components for extruder A-C-D 1X Doteco Android mudular gravimetric dosing batch ...
2017 | 300046605 | COLINES
More information
Cap Applicators. Cap applicator Cap25, year 2014 Version: 200 Light Cap Working hours: 17.500 (Marcho 2024) The machine is in production till June 2024, very good condition...
2014 | 300046647 | TETRA PAK
More information
Sheet coextrusion lines. Line for the production of HIPS-ABS-PP sheet Main extruder (layer B) EA100/52D Secondary extruder (layer A) EA48/40D Linear speed 4-35 mt/min Carraro head Calender 1000 mm, 3 cylinders diam 500 mm, chill roll diam 298 mm, embosser roll diameter 250...
2017 | 300046661 | AMUT
More information
Coextrusion lines. 5-layer coextrusion line OVERFIVE PLUS for the production of agricultural stretch LDPE film Film thickness: 23-25 microns Type 75/75/75/100/75/Z/3600 DW - LSW " LD" 4x LHE 75/30 extruder with Magnetic 84Kw motor with Zambello 1x LHE 100/32 extrud...
2015 | 300046725 | CMG
More information
Rotary compression moulding press. Sacmi Compression Molding Machine year 2015 Includes: - Molding Press CCM24SB - Mold 24 cav. 30/25 1.7gr - Scoring Folder machine SCM 12LB - Camara CVS 052D - Automatic Box Filling machine - Material feeding system and color masterbatch ...
2015 | 300046741 | SACMI
More information
Injection moulding machine for PET preforms. Used Injection Machine for PET Preforms HUSKY Hypet 500 P155/150 E155, year 2007 Working hours 103,228 hours The system includes the following: Mould: Complete 144 Cavity 52.0g/28mm PCO 1810 Preform Mould (HR + Cold-Half) Cavity Plate Model: ...
2007 | 300046729 | HUSKY
More information
Other Machines. Moby Infrared + Vacuum Systems This reactor is able to decontaminate the recycled polyester (R-PET) to make it suitable for contact with food. The “Cleaning efficiency” demonstrated is > than 99% on both R-PET in flakes and R-PET in granulates Capac...
2019 | 300046386 | SB PLASTICS
More information
Carton erecting machine. Case packer for bottles 1L-1,5L IXAPACk from 2019 Capacity 6000 bph Possible configurations: 6 pack - for 1L bottle 9 pack - for 1L bottle 6 pack - for 1,5 L bottle Still in production, will be working till end of may 2025...
2019 | 300046899 | IXAPACK
More information
Extrusion lines for coating. High Speed Co-extrusion coating laminating machine MODEL : WCL-H-1300 With very few working hours Extrusion resin LDPE (MI=6-8), PP (MI=15-20), EVA(MI=20)(VA<=6%)(mix with PE) EAA, Surlyn Extrusion thickness:: 12ì~40 microns Extruder output: Ø100: ...
2017 | 300047154 | WORLDLY
More information
Grinder - Granulator. Preliminary production: 400-600 kg/h 2x screens: 4mm and 10mm 3+2 blades 5+2 counter blades Blower TRIA HT 40 Noise isolation Transportation pipes fi 150mm included Cyclone on a steel construction included Ready to plug-in and work...
2020 | 300047136 | TRIA
More information
Single screw repelletizing line. Materials: PE, PP Double degassing Degassing water circulating system Hydraulic screen changer Erema back flush Continuous filter Reel feeder Conveyor belt with metal detector Master batch dosing Extruder hopper Shredder-extruder combination Ho...
2017 | 300047169 | EREMA
More information
Air Compressors (Low Pressure). ...
2020 | 300047188 | KAESER
More information
Thermoformer. Max. reel diameter: 1200 mm Max. pos/neg depth: 130/130 mm Max. sheet width: 810 mm...
2004 | 300047234 | TFT
More information
Sleever for PET bottles. Used Sleever machine for PET Bottles Brand: Krones Model: Sleevematic M1/Shrinkmat 4000 Year 2010 Up to 27,000 containers per hour Machine working until January 2025 ...
2010 | 300047246 | KRONES
More information
Bottom weld bags on the roll. Max reel width 1800 mm Film thickness from 10 to 60 my Materials HDPE/LDPE/BIO...
2015 | 300047283 | MOBERT
More information
Pouch making machine. For the production of Heavy Duty Slider Large Pouch Making Machine. 1.5kg - 20kg. Pouches. Gusseted and Non Gusseted with or without reclose Slider. Production options: Side gusset bag with shorter (stopped) or normal length side gusset Top Zipper ...
2004 | 300047408 | B&B
More information
Laminators. Laminating machine with improved unwinders/rewinder and material tension to process both plastic and paper and cardboard with high efficiency: Material width 1330 mm Diam. primary unwinder reels: 1000 mm Diam. secondary unwinder reels: 1200 mm Core ...
2014 | 300047421 | NORDMECCANICA
More information
Sorting and separating plant. Metal separation sorter for PET Flakes with Air Pressure and Metal Sensor (ferrous and non-ferrous) Purchased in 2023 and with only a few hours Working width : 1536mm Number of blowers : 192 Resolution metal: 2 mm Sensor sensitivity metal : for al...
2023 | 300047428 | SESOTEC
More information
Stretch blow moulding machines. Side Maxiblow blower, year 2011 Output: 1100 bph Formats: 0.25L - 10L Neck: PCO 1810 / 38 mm It is possible to customise the neck by changing the spindles It has preferential heating 7,243,274 bottles produced Includes: - 3 molds: 50 cl & 1L PC...
2011 | 300047448 | SIDE
More information
Extrusion Blow Moulding machines up to 10L. Average consumption 100 kW Deflashing unit Yes Leak tester Yes All machine has straight blowing and angular blowing system Available 3 extra similar machines with following heads - 1x 1 head - 1x double head 150 mm CD - 2x triple head 125 mm CD -...
2019 | 300047503 | UNILOY
More information
Flexo Printing machines off line. Printing Possibilities:6+0, 5+1,4+2,3+3 Speed with bio 80-100mt/min with plastic 150-180mt/min Closed doctor blades Cylinders n.6-45 n.6-50 n.6-55 n.6-60 No video Double manual winder and unwinder Max reel diam 750mm...
1997 | 300047604 | UTECO
More information
Moulds for Preforms. HUSKY Cold Half System year 2017 Neck 38 mm Weight 76 g Model: 16 63.5 x 160 Gen 3.5 Stroke 114 mm Max Capacity: 104 t Used in a HyPET 120 In perfect condition and available immediately...
2017 | 300047425 | HUSKY
More information
Other Machines for Drinks. DLSB-300/80 Recirculating Chiller Storage Volume: 100L Coolant temperature: -80 ºC - RT Refrigerating capacity: 40015-2678W Coolant: R404A, F23 Rated power: 21KW Max. input current: 40 amps Rated Voltage/ Frequency: 380V/50Hz 3 phase Circul...
2022 | 300047600 | TOUCH SCIENCE CHILLER
More information
T-Shirt flat bag making machine. Mother reel diameter max : 1300mm Mother reel weight max : 2500Kg Photocell Gusseting unit...
2007 | 300047722 | SALDOFLEX
More information
Thermoformer. Flash Heaters Automatic motorised window frame adjustment in both axes Plug assist no sheet loader...
2001 | 300047774 | GEISS
More information
Complete Non-carbonated Aseptic Filling Line for drinks. Complete wet aseptic filling line KRONES Contiform Bloc Construction year 2016 For CSD and soft drinks 25.000 bottles hour Bottle sizes : 0.33, 0.5, 0.75, 1, 1.25 and 1.5 L Closure 1810 Flat and sport cap 28 mm 2 labellers 1 for sleeves and 1 for...
2016 | 300047795 | KRONES
More information
Thermoformer. Complete production line : Chiller Unwinder Machine Tools/Molds Endless stacker KTR4 (Basic device for stacking out articles from the thermoformer into endless chutes. The cup and lid stacks have to be taken out manually) Dimensions (lxwxh): 1500 x 1...
2012 | 300047825 | KIEFEL
More information
Moulds for Closures. Used 72 cavities molds for caps and closures Brand: Corvaglia Year: 2017 Neck: 29/25 Weight: 1,45gr Cycle Time: 3,9 sec Mold available immediately! ...
2017 | 300047934 | CORVAGLIA
More information
Moulds for Closures. Used 72 cavities molds for caps and closures Brand: Corvaglia Year: 2018 Neck: 29/25 Weight: 1,45gr Cycle Time: 3,9 sec Mold available immediately! ...
2018 | 300047937 | CORVAGLIA
More information
Label sheeter - cross cutting. 1 flexo and varnishing unit with UV Hot foil unit with GEW integrated 1 x Stork Rotary Screen with UV 1 x Flat beds or Embossing Unit 1 x standard semi rotary die unit 19” max. repeat with fully rotary option Lamination Maximum roll diameter unwind...
2011 | 300047969 | ABG
More information
Double screw repelletizing line. Extruder MARIS 92/40D year 1997 with double degassing + pumps + loading hopper + electrical panel Filter changer Prealpina vertical underwater cutting Working hours Dec. 2024: 61695...
1997 | 300048009 | MARIS
More information
Coextrusion lines. - Laminating Film: Up to 1800 mm (net) - Barrier Film: Up to 1650 mm (net) Max Linear Speed: 80 m/min Production Capacity: - Barrier film: 250-300 Kg/h (± 10%) - Laminating film: 300 Kg/h (± 10%) Thickness: - Barrier film: 40-200 mic - Laminating ...
2006 | 300048024 | BANDERA
More information
T-Shirt flat bag making machine. Complete automatic line for the production of bottom weld bags and shoppers in PE and Bio, consisting of: Motorized self-centering reel holder Mobert Victory 110 Delta 8 welding machine Automatic bundle stacker with die cutter Tape conveyor and scrap...
2012 | 300048072 | MOBERT
More information
Injection moulding machine for PET preforms. Used Injection Machine for PET Preforms HUSKY HyPET400 P100/110 E120 year 2007 The system include the follow auxiliaries: Resin Dryer Piovan DP 627 Dehumidifier Plastic System DL3000 Booster Pump Green Box LOWARA MV Unit ...
2007 | 300048092 | HUSKY
More information
Injection moulding machine for PET preforms. Used Injection Machine for PET Preforms HUSKY HyPET400 P100/110 E120 year 2009 The system include the following auxiliaries: Resin Dryer Plastic System DP-824PHT Dehumidifier Plastic System Booster Pump TBC MV ...
2009 | 300048093 | HUSKY
More information
Injection moulding machine for food and beverages caps. Used Injection Machine for Caps and Closures HUSKY HyCAP H400 RS95/80 year 2009 The system include the following auxiliaries: Dehumidifier Plastic System Masterbatch Plastic System VL170-09 Hopper Plastic System LDM10 ...
2009 | 300048095 | HUSKY
More information
Twin-screw extruder for PE/PP compounds. COMAC PLAST Italian Make machine Processed materials = PA, PP & other material suitable Output (kg/h) = 320-480 kg/h dependes on the recipe FEEDING SYSTEM Number of hoppers = 5 Feeders Mixers = No Gravimetric Dosing = 5 LIW Feeders EXT...
2015 | 300048108 | COMAC PLAST
More information
Cup Form-Fill & Seal machines. Cup Form Fill and Seal Machine CIMIPACK PACKFORM ECO YEAR OF CONSTRUCTION: FEBRUARY 2024 MACHINE LIKE NEW USED ONLY FOR PRODUCTION TEST DESCRIPTION: MATERIAL OF CONSTRUCTION: STAINLESS STEEL VERSION: PNEUMATIC DOSING UNIT: 10 / 74 CC VOLUMETRIC...
2024 | 300048181 | CIMIPACK
More information
Air Compressors (High Pressure). Used compressor (high pressure) for PET Bottles Brand: Siad Model: Tempo 1850 Year 2012 Cooling Tower Evapco Year 2012 Air tank and air dryer not included Working hours: 59.273 h Machine in working conditions and available in May 2025...
2012 | 300048189 | SIAD
More information
Air Compressors (High Pressure). Used compressor for high pressure SIAD Tempo 2 1850 Air Flow: 1850 Dryer included machine installed ...
2007 | 300048299 | SIAD
More information
Pasteurizer. Pasteurizer for food and liquid products Brand: Tecnomec (Made in Italy) Model: SB 188/PR/CV Year 2016 PLC: Siemens S7-300 Steam Indirect pasteurization at 90 Cº Machine stopped ...
2016 | 300048320 | TECNOMEC
More information
Label flexo printing machines. TECHNICAL SPECIFICATIONS Mechanical press speed: 0 - 175 m/min. Waste rewind diameter: 1016 mm - max. 40 kg Unwind/rewind tower diameter: 600 mm - max. 40 kg WEB SPECIFICATIONS Web width max.: 420 mm Min. width for papers materials: 50% of max. widt...
2016 | 300048414 | NILPETER
More information
Injection molding machine up to 250 T . bimetalic screw...
2021 | 300043480 | JSW
More information
Injection molding machine up to 250 T . Demag El- Exis SP 200-920 Included: Roboplas IML Take In-Out Side Entry Robot vision system Chiller Treadmill Belt Color Mixer Vacuum for Materials Hours in production: 73.000 h...
2016 | 300048562 | DEMAG
More information
Injection molding machine from 250 T up to 500 T . Demag El- Exis SP 350-920 Included: Brink IML Take In-Out Side Entry Robot vision system Chiller Treadmill Belt Color Mixer Vacuum for Materials Hours worked: 68.500 h...
2016 | 300048563 | DEMAG
More information
Complete PET filling line for still water. Sidel Combi for PET from 2014 For still water Includes: Combi Sidel Matrix SBO 24/22 for 54.000 bph @ 500ml Carton packer Ocme (54.000 bph) Sidel Rollquattro labeller (36.000 bph) Very few hours Available immediately and can be seen in dry cycle...
2014 | 300048586 | SIDEL
More information
Silos. Capacity : 28m3...
2019 | 300048617 | FÖRDERANLAGEN-MASCHINENBAU KANERT GMBH
More information
Stretch blow moulding machines. Used Stretch blow molding machine Krones H24 Contiform 2005 Includes preform feed Heat resistance set No molds are included In production til the end of August 2025...
2005 | 300048631 | KRONES
More information
8 Colours CI Flexo Printing Machines. LDPE - 20μ - 150 μ LLDPE - 20μ - 150 μ HDPE - 10μ - 150 μ BOPP - 12μ - 60 μ PET - 12μ - 50 μ OPA - 15μ - 50 μ CAST PP - 20μ - 70 μ PAPER 40 - 80 gsm LAMINATED Film/Film 150 μ Mechanical speed: up to 300 m/min, depending on substrate, inks, ...
2014 | 300048659 | COMEXI
More information
Laminators. Compact laminator Materials :BOPP, PE, PET, PA, CPP, PAPER, AL Color touch screen, user interface with automatic settings, meter counter, speedometer Sleeve system replaceable from the side, built-in air cylinder and servomotor rotation Electric g...
2021 | 300048670 | VARGA FLEXO
More information
Bi-Injection moulding machine. Full electric bi-injection molding machine Hours worked: 10.164 h 1st injection unit: Screw 35 mm Volume: 25 cm3 2nd injection unit Screw 35 mm Volume: 22 cm3 Injection pressure 1&2 : 1540 bar Screw speed : 300 rpm ROBOT NOT INCLUDED Ancillary e...
2018 | 300048712 | BILLION
More information
Stretch blow moulding machines. Used stretch blow molding machine for PET Watercoolers bottles and PET Plastic Kegs Brand: Lanfranchi Model: Master P-1000 Formats: from 5lt to 40lt Neck: 84mm Maximum Diameter of the bottle: 318mm Maximum Diamater of the preform: 80mm Maximum Diam...
2013 | 300048734 | LANFRANCHI
More information
Stretch blow moulding machines. Used Stretch Blow Molding Sidel Sidel SBO 10/14 Series 1 Year: 1998 Production: 12.000 bph Neck: PCO 1810 PLC: Siemens S5 with thermoregulator and air conveyor (approx. 90 m) machine in working condition till the end of september 2025 ...
1998 | 300048775 | SIDEL
More information
Drawtape bag making machine. Heavy duty automatic draw tape garbage bag and bottom sealing bag making machine with overlap and perforation on roll Thickness of film: LD/LLDPE: 0.02-0.05mm (one layer) HDPE: 0.015-0.05mm (one layer) Bag width. 450 -1000 mm Line speed: from 100 up...
2020 | 300048818 | HEMINGSTONE
More information
Injection stretch blow moulding machines for PET bottles. Injection molding machine Nissei ASB 50MB, year 2006 Included: - Dryer - Auto loader Injection Clamping force: 60 kN. Screw diameter: 44 mm. Cavity Number: 1-6 . Capacity max.: 0,03 l- 2,5 . Thread Diameter max.: 17 - 63 mm. Neck Diameter max.: 15...
2006 | 300048839 | NISSEI ASB
More information
Injection molding machine up to 250 T . Used materials: PP, PE, PA, PA+30%GF Working hours: 52,131 as of 21/07/2025 ...
2012 | 300048846 | ENGEL
More information
Injection stretch blow moulding machines for PET bottles. Used injection molding machine Nissei ASB 12N/10 year 2005 Exclude: Molds ( can Buying with other Price) Include: - Dehumidifier - Dryer Neck 18-24 Bottle 100ml Can 4 or 5 cavity Bottle 250ml 3 cav Bottle 500ml 2 cav...
2005 | 300048888 | NISSEI ASB
More information
Thermoformer. Possibility to form and cut in the same station or in two different ones Material width 900 mm Dry Cycles/min: max 60 Leaf inlet preheating on laterals for chains Robot at end of line with possibility to rotate for a/b trays Long stacking table ...
2010 | 300047961 | AMUT COMI
More information
Fruits processing line. TAMBLEX coconut water extractor machine Includes: Inlet silo: used to select coconuts arriving from the field. Two or three people will select the coconuts, and when the raw material enters, it will fall directly onto the initial conveyor Conveyor...
2018 | 300048912 | TAMBFLEX
More information
Injection stretch blow moulding machines for PET bottles. Nissei PF6 2B V4 injection stretch blow molding machine from year 2009 Includes: Dehumidifier Dryer + Drying Hopper Chiller 10TR Capacity Hours: 115.000 Includes one mold Machine is in production, well maintained and immediately available! ...
2009 | 300048968 | NISSEI ASB
More information
Twin-screw extruder for PVC compounds. Twin screw PVC compounding extruder complete with: feeding hopper, extruder, die head and pellet cooler Available: 1st quarter of 2026 Also for sale two other similar machines (ask for details)...
2003 | 300048993 | BANDERA
More information
Mounter proofer. Max Mounting Width : 51 Inches (1295mm) Robotic positioning of plates using image recognition Single plate fully automatic mounting Quality Check after mounting using image recognition Extremely accurate and fast positioning (S·m) Operator independe...
2022 | 300049017 | AV FLEXOLOGIC
More information
Thermoformer. Simultaneous forming and cutting Heaters Automatic sheet loading Cycles/min: max dry cycle 60 Maximum sheet width: 920 mm Maximum reel diameter: 120 cm Sheet inlet heating chains Extra-long conveyor belt for greater evacuation of pieces to the ...
2016 | 300049048 | AMUT
More information
Other Machines. Production Capacity: • Up to 25 MW or approximately 80,000 solar panels annually with one shift. • Can reach up to 50 MW or approximately 160,000 panels annually with double shifts. · Condition: The line has only produced around 7,000 panels since 20...
2021 | 300049049 | ECOPROGETTI SRL
More information
Double-shaft film slitter-rewinders. Mechanical Features: Shaftless unwind carriage with pneumatic expanding chucks Electro-pneumatic disk brake system with automatic tension control Scissors cut slitting unit with swing-out bottom knife shaft Center winding system with friction or air-...
2001 | 300049061 | KAMPF
More information
Stretch blow moulding machines. Used Sidel rotary blow molding machine Model: SBO 20/24 Universal Year: 2010 neck: 29/25 Sameto Preform Dumper machine installed but not in working conditons....
2010 | 300049079 | SIDEL
More information
Pouch making machine. Double lanes box pouch with zipper bag making machine 2 lanes 3 sides sealing with or without zipper bag. 2 lanes flat pouch with or without zipper bag. 2 lanes box pouch with or without zipper bag. 3sides-seling with zipper: L1=100-700mm, L2=80-400...
2020 | 300049095 | KUNRUN
More information
8 Colours CI Flexo Printing Machines. AVAILABLE IN JANUARY 2026 100% automatic movement of groups and opening of bearings. 3' and 6' shaft unwinder and rewinder + 3' swivel bearing for reels < 60 kg without shaft handling. Suitable for printing on: 25 to 100 micron polyethylene, 15 to 4...
1999 | 300049097 | COMEXI
More information
Shredder. Cleaned and overhauled in 2025. Type: One shaft with pusher Cutter house: 75 cutter knives 4 stator knives Dimension of cutters: 60x60 mm Nominal speed rotor: 200 rpm Rotor speed range: 100-300 UPM Motor: 132 kW Screen size: 65 mm HEX Diameter of s...
2019 | 300049020 | VECOPLAN
More information
Offset printing machines. Max. Width of the Material 330mm Thickness of the Printed Material 0.1-0.3mm Machine Speed 50-180rpm (50m/min) Max. Diameter of Unwinding 700mm Max. Diameter of Winding 700mm AV Drying Die cutting Scrap Rewinder Video BST Chiller...
2013 | 300049106 | ZONTEN
More information
Injection stretch blow moulding machines for PET bottles. Used Nissei ASB PF 3-1 BHLL Dryer and Hopper: Matsui Molds no available but it was blowing 5lt bottles machines dismantled ...
2013 | 300049115 | NISSEI ASB
More information
Thermoformer. Maximum speed: 40 cycles/min Minimum-maximum internal frame dimensions: 300x200 - 720x430mm Minimum-maximum material width: 320-740mm Maximum cutting surface on upper/lower table: 700x430mm Cutting power: 500kN...
2000 | 300049136 | W.M. WRAPPING MACHINERY SA
More information
Side weld bag making machine. Bag width 80-600 mm Thickness : 0,020-0,100 mm...
2020 | 300049144 | GUR-IS MAKINA
More information
Double-shaft film slitter-rewinders. Materials: Hard and soft films made of PE, PP, PA, PET, PVC, papers and laminates Mechanical features: Shaftless unwind carriage with mechanically and pneumatically expanding chucks for 70–76 mm cores. Automatically controlled generator brake. Autom...
2010 | 300049147 | KAMPF
More information
Stretch blow moulding machines. Max speed 16.000 bph Approx. 45.000 hours worked Neck 29/25 Includes: Preform feeding system Air recycling system for preblow Hopper Preform dumper Chiller Recently dismantled Available immediately! ...
2013 | 300049170 | SIDEL
More information
Shredder. Filling length: 1250 mm Inlet length 1255 mm Inlet width 1255 mm Dimensions of cutting crowns 40x40mm Screen hole diameter 40 mm Drive side right (standard) Type: electric motor with V-belt drive Nominal motor current: 169 A Motor speed: 750 rpm Scr...
2022 | 300049168 | VECOPLAN
More information
Coextrusion lines. TRIPLE BUBBLE TECHNOLOGY: 13-layer blown film line for the production of biaxial-oriented high barrier films EVOH based version (not PVDC) Dec 2021 Retrofit with complete exchange of hot part Film width: 900mm-1400mm Thickness range: min. 20 micron...
2012 | 300049160 | KUHNE
More information
6 Colours CI Flexo Printing Machines. Max reel diam unwinder: 760 mm Max reel diam of rewinder 600 mm Materials: paper/film Thickness Range: 20 micron - 110 gr/m² paper Print Speed: 120 m/min Belt Guide System: BST No Video System Closed Chamber Doctor Blades 7 Ink Trays 7 Kalve Ink Pump...
1993 | 300049212 | WINDMÖLLER & HÖLSCHER
More information
Other Machines. The manipulator is a pneumatically operated lifting device that allows the level of the load being handled to be changed. All horizontal and vertical movements of the load in space (within the manipulator's working range) are free and achieved by the...
2012 | 300049216 | DALMEC
More information
Thermoformer. Forming Area Max - 600 x 560 mm Forming Area min - 400 x 300 mm Speed - 1500 cycle/h Automatic quickly change mould Preheater for PP Heated die with diathermic oil thermoregulator PLC Siemens...
1999 | 300039242 | RIGO
More information
Label flexo printing machines. Max. film width 260 mm Printing speed 225 m/min Video control UV drying; GEW VCP cassette UV-drying (200 W/cm) with "cold" filter - 10 pieces. UV inks Materials: paper, film,(thickness 50 – 360 micron) One trim winder, two trim cutting unit Wiri...
2012 | 300039707 | MARK ANDY
More information
Packing machine for cans. Kettner Traypac T 45 from year 2000 Machine Capacity 45 cy/m 24-seater glued tray for shrink packaging Variable feed of packaging Hot bonding by means of an adhesive device Equipment: 3 layers preparation of four-packs 2 layers of preparation of...
2000 | 300040419 | KETTNER
More information
Wicket bag making machine. Servo driven side sealing wicket bag making machine Type of production: Wicket bags: bread, toilet paper bags hygiene and other types of wicket bags. Material that can be processed: PE, CPP, OPP Sealing width (bag length):From 200 to 650 mm Draw leng...
2004 | 300040500 | MAMATA
More information
Palletizer for empty bottles. 1,000 bottle/minute Max bottle height 400mm Min bottle diameter 30mm Max bottle diameter 125mm Max palletizer height 2600mm...
2002 | 300040065 | ZECCHETTI
More information
Washing plant. Washing and drying: manufacturer Apro Grinder, conveyor, other parts: manufacturer Amis PET bottles in pressed form, up to 2 litre bottles The producer of the line it’s AMIS Recycling Technology for Conveyor and Grinder, together with APRO APPARA...
2017 | 300040812 | AMIS
More information
Stretch blow moulding machines. Sidel SBO 4 Compact blowing machine, year 2007 Output: 6.400 bph (for 0,5l) / 6.200 bph (for 1,5l) It includes: - TEFA chiller, Platinium 370 (year 2007) - Mold for 500ml CSD bottle. - Preform elevator and hopper. ...
2007 | 300036501 | SIDEL
More information
Patch handle bag making machine. Material LDPE, HDPE, MDPE Film thickness 0,02 – 0,10 mm Glue for reinforcement DURO TAK J8510 Min. and max bag width 200 – 600 mm Min. and max bag lengths 250 – 750 mm Edge guide FIFE GP25 Photocell Datalogic TL10-011 Max reel width 1350 mm...
1985 | 300037537 | WINDMÖLLER & HÖLSCHER
More information
Stretch blow moulding machines. Straight Line Blow Molding Machine. 80% New. Machine was built on end of 2018. Fully functional. The rotary blow molding machine is a combination of the latest German technology with our superior design and manufacturing capacity. This machine co...
2018 | 300042177 | STRAIGHT LINE BLOW MOLDER
More information
Bottom weld bags on the roll. Unwinder D 1000-1200-2Q Web Guide Welding unit 9270 Maximum number of bags per minute 4 welders 2x300 2 welders 2x170 1 welder 2x75 Bag length: 4 welders 285-470 mm 2 welders 470 - 930 mm 1 welder 930 - 1790 mm Welding width 320x2 mm Materials HDP...
2012 | 300042064 | COEMTER
More information
Bottom weld bags on the roll. Welding machine working from reel to reel for the production of welded and pre-cut bags starting from a large format tubular reel, divided into various lanes to be then rewinded on cardboard or plastic cores. Hydraulic lifting and peripheral unwindin...
2016 | 300042755 | AMUTEC
More information
Other Machines. Machine with PLC, touch screen control, main conveyor, welding equipment for mask ear band Production speed : up to 90-120 pcs/min Compressed air 0.5 ~ 0.8MPa, after primary drying, filtering Use flow: about 400L /min...
2020 | 300043468 | SENFENG
More information
Stretch blow moulding machines. Stretch blow molding machine SMF HS 3000 2 cavities total production december 2021 : around 5 milions of bottles Production: 1,0lt > 2.500 bph - 2,5lt > 1700 bph machine installed and in working condition ...
2011 | 300043669 | SMF
More information
Slitter-rewinders for Adhesive Tapes. Web Width: 1700mm Slitting Width: 1620mm Unwind Diameter: 800mm Rewind Diameter: Turret type 2 shafts interchangeable 3" core : 150mm diam. Razor slitting Hydraulic lifter (for 1200kgs) at unwinder PLC programmable unit with touch panel 7"...
2018 | 300043772 | WEBTEC
More information
Pasteurizer for liquids. Juice compound processing line Möstl & FBR ELPO, year 2018 Capacity: from 2.000 to 4.000 l/h Manufacturers: Möstl Anlagenbau GmbH (Austria) & FBR Elpo Spa (Italy) PLC Siemens S7 Includes: Powder Dissolving Unit & Concentrate Discharge Station Mös...
2018 | 300043835 | MÖSTL
More information
T-Shirt bags on the roll. In the actual configuration the machine can produce: two fixed bag lengths: 450 mm or 490 mm one fixed bag width: 220 mm Printer: 1 colour....
2010 | 300043470 | LUNG MENG
More information
Extrusion Blow Moulding machines from 10 L. Continuous Blow Molding machine for cannisters/jerrycans Automatic deflashing Clamping force 190 kN Included in the scope of delivery: - 2 molds of 19lts for purified water - 1 mold of 20lts for purified water - Grinder Pagani with conveyor belt a...
2002 | 300044231 | AUTOMA
More information
Other carton filling machine. Complete gable top filling machine Nimco, Model: 480HLBCP Year of manufacture : 2007 Pack type : Gable top Elopak Closure type : Screw cap 35mm Output : Approximately 35-40 Cartons/Minute Products packed: Basmati Rice, Brown and White Sugar, Mue...
2007 | 300044670 | NIMCO
More information
Packing machine for glass bottles. KHS Kisters MultiPacker 199/60 DZ shrinkwrapper for PET/glass bottles, year 1997 Nominal output: 50 packs/min (10.000 bph) Pack formats (on 2 lanes): 1x2/1x3/2x2/2x3 Includes: - Infeed belt with guides and KEB for the dosing conveyor - Grouping ...
1997 | 300044731 | KISTERS
More information
Filler for pouches. Aseptic Ecolean EL-3 pouch filling line, year 2015 Filling volume/package sizes: 500ml, 750ml and 1000ml Capacity of up to 6,000 packages/hour Working hours: 850 hours Included: Integrated packer Conveyer systems The machine is connected and can...
2015 | 300044595 | ECOLEAN
More information
Injection molding machine up to 250 T . Full electric machine....
2013 | 300044883 | JSW
More information
Coextrusion lines. Extruders configuration: 50/70/50.30D Die Model: B 225/315-3 225mm for HDPE and 315mm for Shrink and Stretch film speed: 120m/min max Optifil Plus control unit Thickness control OPTIFIL K is defect and needs to be revised Filmatic K Double winder (re...
2002 | 300042763 | WINDMÖLLER & HÖLSCHER
More information
Sorting and separating plant. The machine can sort one color from a stream of mixed colors of plastic and metal particles. This color can be any color from the entire spectrum. At the moment, the machine is used to sort transparent PET flakes from a stream of multi-colored plas...
2014 | 300045061 | SESOTEC
More information
Lids printing machines. Automatic offset machine with 5-colour printing head type TSO 2000 and 1 base-color (Pre-Print) unit, for decoration on plastic egg-trays. The machine is capable of printing both the top of the cavities and the central strip, or lower hinge, at the ...
2014 | 300045179 | MOSS
More information
Special welding machines. Sack width min: 350 mm Sack width max: 600 Valve sack bottom width: 80-160 mm Bottom width of open-mouth sack: 80-180 mm Open bottom width: 180-380 mm Bottom center distance: 350-750 mm Tube cut-off length: 530-1090 mm Valve patch cute-off length: 80...
2011 | 300045487 | WINDMÖLLER & HÖLSCHER
More information
Special welding machines. Sack width min: 350 mm Sack width max: 600 Valve sack bottom width: 80-160 mm Bottom width of open-mouth sack: 80-180 mm Open bottom width: 180-380 mm Bottom center distance: 350-750 mm Tube cut-off length: 530-1090 mm Valve patch cute-off length: 80...
2010 | 300045481 | WINDMÖLLER & HÖLSCHER
More information
Special welding machines. Sack width min: 350 mm Sack width max: 600 Valve sack bottom width: 80-160 mm Bottom width of open-mouth sack: 80-180 mm Open bottom width: 180-380 mm Bottom center distance: 350-750 mm Tube cut-off length: 530-1090 mm Valve patch cute-off length: 80...
2011 | 300045482 | WINDMÖLLER & HÖLSCHER
More information
Dairy bottling Line. Ultra Clean milk bottling line Krones Modulfill VFJ 1.800-50-113 line, year 2021 Capacity: 12.000bph Formats: 0.5 and 1 l Bottle type : HDPE and PET, neck size: 38mm Working hours: 3.496 h (April 2023) Milk product shelf life: 15 days Including...
2021 | 300045504 | KRONES
More information
Compounding extrusion lines. CO-ROTATING TWIN SCREW EXTRUSION LINE Working capacity: 400 kg/h (depending on material and working condition) Screw diameter & L/D: 62.4 mm, L/D 48 Max screw rpm: 600 rpm Main drive: AC150HP (110kW) Screw type: segment type, flexible combin...
2015 | 300045645 | MATILA
More information
Thermoformer. Forming - cutting - stacking Forming machine: Min-max forming area : 400x250-700x500 Min-max film width: 440-750mm Height of parts above / below the film level: 120 / 40mm Diameter of Film Reel: 1200mm Connected electric power from upper-lower heate...
1999 | 300045659 | ILLIG
More information
Thermoformer. FC 600 E electrically driven thermoforming machine (vacuum-pressure forming, cutting, counting and stacking) Max. external forming mold dimension: 640x450mm Max. mould size with pneumatic side clamping frames: 600x450mm Automatic unwinder Sheet tran...
2010 | 300045660 | W.M. WRAPPING MACHINERY SA
More information
Digital printing machines. Maximum material width 760mm Printing speed: 31 m/min in 4-color mode; 42 m/min in EPM; 25 m/min in 5-color mode. Addressing capacity of 812 dpi at 8 bits; 2438x2438 dpi HDI Linearity: 175,180,180m, HMF-200 Maximum image size 740 x 1100mm Substrate t...
2019 | 300045667 | HP INDIGO
More information
Extrusion lines for coating. PVC coating line (3200) for textile with twin screw extruder The line coats perfectly with soft PVC (PU as well) and it is able to work with open fabrics(mesh), closed fabrics and non-woven textile. The machine has the possibility to work without car...
2008 | 300045700 | BG PLAST
More information
Dosing Units. Tetra Pak Aseptic Dosing unit E - 2020 Includes full cip, steam sterilization and has an aseptic filtration system One process step is removed when going from batch to inline dosing, thereby reducing equipment and running costs. Ingredients saving...
2021 | 300045875 | TETRA PAK
More information
Injection moulding machine for TPR. Automatic rotary machine for thermoplastic boot injection including special screw geometries for BIODEGRADABLE and regenerated materials as well as the possibility of injecting technical articles of pharmaceutical industry consisting of: -1 4-COLUMN...
2021 | 300046112 | BRSERVICE SRL VERA
More information
Thermoformer. Drawing depth (negative): 120 mm Drawing depth (positive): 25 mm Sheet width: 380 mm Material roll diameter: 1000 mm Drying cycles per minute: maximum 45 2400 working hours The machine is after overhaul of the main shaft and engine Can process PP ...
2004 | 300046280 | GN
More information
Header/Capper for cosmetic tubes. Polytype CM 130 capper Tooling included for 19, 25, 30, 35 and 40 mm (only screw on)...
2015 | 300046315 | POLYTYPE
More information
Independent Rewind Stations Film Slitter-Rewinder. Unwinding Working width cores 4200 mm/film 3700m Rewinding min. diameter 200 mm min. width of parent roll - 600 mm max. width of parent roll (film) - 3700 mm min. thickness 50 µm, max. thickness 350 µm Cores 3 inch / 6 inch - paper and plastic...
2010 | 300046320 | EUROMAC
More information
Mono extrusion lines. Extruder HS 90; 30 L/D Fixed die head mod: BF 14-35K Die diam. 180 mm IBC Thickness 25-250 my Thickness control system Kundig Gravimetric dosing unit Contrex DE 3000-SN 3 components Motorized calibration basket Rotation haul off Decatex Gusseting de...
2005 | 300046383 | ALPINE
More information
Other Machines. Robotized cylinder engraving line for rotogravure printing 1 LASERSTEAM FX UNIT 1. LaserStream unit size W2650×H1250×D850 mm 2 COATING UNIT Coating unit coats photo resist, TSER, on to the cylinder. 3 DOUBLE DRYING UNIT Chuck the cylinder and rota...
2017 | 300046406 | THINK LABORATORY
More information
PET labelling machine. Used Simonazzi (Alfa) used roll-fed labeller for PET plastic bottles -the labeller speed is 7.500 b/h at the moment , but can run till 12.000 b/h -working hours: 18174 h machine in working condition ...
2002 | 300046471 | SIMONAZZI
More information
Stretch blow moulding machines. Side-TMS 2004e Year 2007 - Machine is working - Technical handbook available Neck: 40mm for detergent and cosmetic bottles ...
2007 | 300046476 | SIDE
More information
Labelling machine for glass bottles. Used Self Adhesive labeller for glass bottles Minimum production 800 Maximum production 2000 Machine mostly new, it never been used One machine with 2 heads label the body/retro and another machine with 1 heads labels the neck as Taxometer Machin...
2022 | 300046491 | CIMEC
More information
Labelling machine for glass bottles. Labeller for glass bottles OMB from 2013 Model ET 2000 2T 2000 bottles/hour 3 labeling stations 2 in-line capsule heads Double tray capsule accumulator of approximately 1000 capsules Three augers for Bordeaux, Burgundy and magnum bottles Sensor to d...
2016 | 300046492 | OMB
More information
EPS Shape Moulding Machines. The machine is currently producing: ceiling skirting board (1300 mm х 33 mm х 45 mm) Max. mould sizes (mm): 1612 х 800 х 45 Opening stroke (mm): 1000 Average consumption (kW): 7,5 Moulds are not included Working hours: 39 432 (on 12.02.2024)....
2004 | 300046548 | HEITZ
More information
Single screw repelletizing line. Gamma Meccanica single screw extruder D60 L/D 35 with : Degassing Quick Changing Filter Cooling Tank Circulation pump Dryer Pelletizer Vibrating sieve Blower Big-bag support filler (New chamber and refurbished screw. 30 KW main motor with Inverter) ...
1996 | 300046531 | GAMMA MECCANICA
More information
Bottom weld bags on the roll. Mother roll max diameter 800 mm Machine speed 20-100 m/min C-folding 220-660 mm Web width winding, 100-500 mm Roll changes/min 8 max Max roll diameter, 200 mm...
2017 | 300046585 | FAS
More information
Injection moulding machine for PET preforms. HUSKY Injection Molding Machine for Preforms MODEL INDQ90PET RS 80/80 16 cavities Auxiliaries included: - Desiccant Hopper - Desiccant Dryer - Mold Dehumidifier Molds Included: - Hot Runner 16 Cavities - Cold Half PCO 1810 - 17 gram Preforms -...
2002 | 300046380 | HUSKY
More information
Other Machines. 1/ Laser die cutter Packmaster OEM/CW - Giotto CO2 4 axis Compact v500 Hi50, with provision for a 2nd laser head Laser working area : 900x900mm Max material width : 1300mm Mechanics of support and protection of the OEM laser die cutter Laser engravi...
2019 | 300046627 | SEILASER
More information
Grinder - Granulator. Inlet cross-section: 400x590 mm Materials: PE, soft and hard, PP, all kinds of plastic and soft plastic ROTOR DIMENSION Diameter 300 Cutting width 590 ROTOR EXECUTION Blade rotor rows 3 blade rotors units 3x2 drive motor performance in kW: 11-18...
2013 | 300037511 | ZERMA
More information
Injection molding machine from 250 T up to 500 T . -Closures package, consisting of: nickel-based bi-metallic barrel M9, additional tungsten carbide (WC) reinforcement for highest abrasion- and/or corrosion resistance, working range up to 350 degrees C -standard-Barrier-screw S26 diameter 80 mm, wi...
2012 | 300046769 | ENGEL
More information
Cheese equipment. Drying line for cheese (can be used for other food products too) Brand: Davari Engineering (made in Italy) Model: Fluidy dry A 200 PM Year: May 2010 Product: grated cheese as Parmisan Dimensions of the product: 3mm Temperature: 20 ºC Humidity: 42...
2010 | 300044101 | DAVARI
More information
Labelling machine for glass bottles. Used labeller for Glass bottles Brand: Cimec Linear Labelling 1LS 1 head Production: 1.000 bph Cold glue Precutted label Possible to inspect in dry cycle ...
2020 | 300046907 | CIMEC
More information
Injection moulding machine for PET preforms. Used Injection Machine for PET Preforms HUSKY 500 PET 155/150 E155, year 2005 Working hours 121.924 The system includes the following: Mould Complete 144 Cavity 45.8g/28mm PCO 1881 Ecobase 1 Preform Mould (HR + Cold-Half) Cold-Half and hot ru...
2005 | 300047016 | HUSKY
More information
Thermoformer. Machine with 90º tilting stacking unit Maximum material width 670 mm Closing force 40,000 daN...
2010 | 300047070 | AMUT COMI
More information
Winder for extruded film. 180 winders for tapes Automatic changeover at winder Single and Double Tape Winding Bobbin Changeover: At preset length Winding Ratio: Electronically programmable Tape Width Range: 1 end 1.8 - 6.0 mm*#**, 2 ends 0.9 - 2.0 mm*#** Denier Range: 500 - 3...
2010 | 300047099 | LOHIA CORP
More information
Wrap Around case packers. Robopac Prasmatic TC400 Combi Compact Year- 2022 Almost new: 1 300 hours 42 cases per minute Current containers volume: 500ml -20oz -Hicone 24x tray + film is its main format. It also has a double infeed: one for loose bottles and one for Hi-...
2022 | 300047079 | ROBOPAC
More information
Shrink Wrapper for PET bottles. Polypack tray shrink wrapping machine Year 2023 For Energy drinks, Tea, Juice Current containers volume: 12oz to 28oz -3x5, 3x4, 4x6, 3x8 Max. actual pack length: 440mm Loose bottles or multi-pack 2 to 6 lanes infeed 1.200 hours ...
2023 | 300047080 | POLYPACK
More information
Shrink Wrapper for PET bottles. KHS tray shrink packer Model TSP A-M TPFO - year 2010 Current containers volume: 400ml to 20oz - Loose or multi-pack -Min. package length: 110 mm -Max. package length: 330 or 410mm -Min. package width: 165mm -Max. package width: 790mm -Heightmi...
2010 | 300047106 | KHS
More information
Extrusion line for PVC profiles. Extrusion line for Tubular PVC profile for medical use Working h. 10.000 - Single-screw extruder Teknomast RSG90-30 year 2010 - capacity 150/200 kg - Granule aspirator - 2x Heads + tooling - Dryers - Haul-off CSF 600 year 2010 - AVTK 600 winder yea...
2010 | 300047161 | TEKNOMAST
More information
Single screw repelletizing line. New vacuum pump Water Ring cutting with double die for PE and PP Centrifuge and Pellet Launch included New loading belt with Mesutronic metal detector Single-shaft shredder with hydraulic presser RollFeed for machine loading of coils from unwinder (n...
2022 | 300047163 | PLASMAC
More information
Other carton filling machine. ELOPAK Aseptic gable top filler including packer Filler type S-PS80HA, year 2008 Gable top package Diamond Curve for 0.5 l, 0.75 l and 1 l Including OYSTAR A+F Traypacker construction year 2011 3 cap applicators PLA 30 Worked hours (June 2024)...
2008 | 300047076 | ELOPAK
More information
Injection moulding machine for PET preforms. Husky LX225 P85/100 injection molding machine, year 1996 Includes: - Husky P85/100 E85 Injection Unit - Husky LX225PET Clamping Unit - Husky S/E Extraction Robot B - Sipa mold, with 12-cavity Sipa hot runner & 85g (40/48 neck) Sipa cold half (w...
1996 | 300047055 | HUSKY
More information
Thermoformer. Max. Reel Diameter:1200 mm Max. Positive Depth:15 mm Max. Negative Depth :160 mm Max. Sheet Width: 750 mm Clamping Force: 500 kN Dry Cycle (cycles/1’): 35 Processing Air Pressure: 8 Bar Compressor Power (m³) : 3 Required Chiller Capacity (kcal / hr):...
2023 | 300047235 | CAG
More information
Packaging machine. Cups carton erecting machine Schubert Year of construction: 2012 Via individual modules Suitable for 4, 8 and 12 trays depending on size Cups packed in sleeves and on tray or rise Working hours aprox. 34.000 Dimensions and packagin information a...
2012 | 300047069 | SCHUBERT
More information
T-Shirt flat bag making machine. Automatic line SA 90 EV for t-shirt bags HD-LD Simple automatic unwinder, reels width 1600 mm, diam max 1.200 mm Gusseting device...
2008 | 300047413 | ELBA
More information
Injection molding machine up to 250 T . Working hours on 13/08/2024 : 62108h Included: - Handling robot: Brand - Wittmann ; Year 2005; - Safety fence, - conveyor belt...
2005 | 300047423 | DEMAG
More information
Injection molding machine from 250 T up to 500 T . Working hours on 13/08/2024 : 56073h Included: - Handling robot: Brand - Wittmann ; Year 2003; - Safety fence, - conveyor belt...
2003 | 300047424 | DEMAG
More information
Stretch blow moulding machines. Urola USP-2 blower for PET bottles, year 2007 Output: 3200 bph Neck: 38; 28/410; 30/25; 26/22 In production until April 2025. It can be shown running. ...
2007 | 300047446 | UROLA
More information
Injection molding machine up to 250 T . Includes 3 air valves, 1x fix platen and 2 x mobile. Temperature control 8 zones Hydraulic trolley advance and eject 2 core pulls Color dosing unit and material feeder Robot WITMANN W-833-0988...
2016 | 300047514 | BATTENFELD
More information
Bottle printing machines. Silk-screen printing machine 3 colors Diameter of containers can range from one inch up to four inches. Maximum length of containers up to eight inches They are being used to print onto plastic jars but can print onto glass containers also. Tooling...
2012 | 300047570 | OMSO
More information
Rubber recycling equipment. Rubber recycling plant Manufacturer: Pallmann Model: PS 4-5 Year: 2009 The set includes: - completely refurbished electrical panel, - conveyor belts, - modified loading mouth (the one shown in the photos) original loading mouth, - half separato...
2009 | 300047608 | PALLMANN
More information
Mono extrusion lines. Plasco gravimetric dosing unit 3 stations Die diameter 220mm Min max thicknesses 15-100 my Martignoni Corona treatment Eurochiller Web guide Silos 5000kg...
2020 | 300047630 | DIING KUEN
More information
Accumulation Head Extrusion blow moulding machine. Mould platen dimensions (LxW): 1200x900 mm mould dimensions Width max. 900 mm Thickness min. 625 mm Height max 1,700 mm Weight max 4.000 kg...
2004 | 300047745 | SIG BLOWTEC
More information
Bottom weld bags on the roll. HDPE, LDPE Electricity consumption 39 kW Type of bag: straight Bag arrangement: roll Bag width: 600 mm Film thickness (max/min): 100 - 20 my Winder type: single Width of mother roll: 2000 mm Diameter of mother roll: 1400 mm Unwinding roller: pneumati...
2004 | 300047744 | LEMO
More information
Chiller. ...
2021 | 300047776 | EUROCHILLER
More information
Laminators. Min-max film width : 650-1315mm Diameter cores : unwinding : 3"/6" - rewinding : 6" Max film tension : unwinding : 20 Kg - rewinding with taper tension : 25 Kg In rewinding, taper tension can be regulated from 10% to max 50% of the set value. Max ree...
2003 | 300047807 | VEA
More information
Butter equipment. Margarine Processing Line RONO Year 2020 Includes: 1. High Pressure Plunger Pump RHP 20-120/3 (N2) with filter 2. Nitrogen Dosing equipment 3. Ronothor RT120-2L-A120 4. Pin Worker Unit 35L x2 (Oil Mixing Tank and Buffer Tank) 5. Control Panels (RON...
2020 | 300047749 | RONO
More information
Stretch blow moulding machines. Used stretch blow moulding machine QUINKO. Year 2018 Formats from 500 ml up to 2 litres Output: 5.000 bph (2,0 l format) Neck: 28 mm 2 available moulds included: 900 ml and 1 litre 300 working hours. For sale due to non use Immediate availability...
2018 | 300047727 | QUINKO
More information
Accumulation Head Extrusion blow moulding machine. Clamping force: 30 T Clamping plate width: 530 mm Length of the clamping plate: 700 mm The gap between the plates max.: 1000 mm Mould width max: 710 mm Mould thickness min: 2 x 250 mm Mould height max: 700 mm Mould weight max: 2 x 700 kg Dimensions o...
2012 | 300047893 | KAUTEX
More information
Screen changer for extruders. AMBF: Automatic belt melt filter with buffer store for the melt Technical data: Flow rate: -450 kg/h Filter surface: 340 x 220 mm, 750 cm2 Storage tank volume: 9 litres Nominal connected load: 50 KW Max. Pre-fuse: 100 A Maximum pressure: 200 bar Ope...
2021 | 300046919 | BRITAS
More information
Extrusion line for PVC profiles. ...
2007 | 300047917 | BATTENFELD
More information
Complete PET filling line for still water. Products: still water without gas Bottle type (basic): from 0.5 l to 2.0 l volume PET closing type: PP screw-cap 26/22 Labels: Plastic Roll Fed Package format: 3x2, wrapped in heat shrink film Tray: Euro-type Line capacity - 25.000 bottles/h Th...
2006 | 300047912 | KRONES
More information
6 Colours CI Flexo Printing Machines. Camera: RE Doctor blade Corona 6 Pneumatic pumps Automatic rewinder Web guide: BST Doctor blades quantity: 6 Ink pumps: 6 Length register: Manual Speed: 180m/min Motor consumption: 70 kW Plate-cylinder gear-pitch module: 10 mm = 10 mm Plate-thickn...
1997 | 300037917 | MANZONI
More information
Other Machines. Stratasys F770 3D Printer - Technical Specifications General Overview • Technology: FDM (Fused Deposition Modeling) • Build Size: o X-axis: 1,000 mm (1 meter) o Y-axis: 610 mm o Z-axis: 610...
2021 | 300047939 | STRATASYS
More information
Circular looms. 24 units of used SL-6 Circular Looms. Price for one unit Year: 2002 (x10) / 2003 (x8) / 2004 (x4) / 2005 (x2) Looms can run 900 picks/min speed. Working Width : 25 – 85 cm...
2002 | 300047966 | STARLINGER
More information
Metallizer. Materials to processed with microns: BOPP 10 to 50 my PET 8 to 50 my CPP 15 to 50 my LDPE 25 to 50 my Nylon 12 to 50 my UPVC 20 to100 my Min. width: 1050 mm Max. roll dia.: 1000mm Core dia.(internal): 152 mm Maximum line speed: 840 m/min Maximum wi...
2017 | 300047960 | BOBST
More information
Tetra Pak Filling Line. Complete line Tetra Pak A1 line for Tetra Classic aseptic 65 ml Capacity - 13,000 packages/hour Working hours: 235 hours Development step - 1000 Includes: Filler: A1 for Tetra Classic Aseptic, Year of production - 2018 Straw applicator TSA30, 201...
2018 | 300044913 | TETRA PAK
More information
Shrink wrapper for cans. Automatic Sleeve sealing & shrinking machine The machine was never used. Brand: Hualian Machinery Model: BSF-6540XLT-III Year of manufacture: 2023 Max. Packing size: Length / Width / Height (mm): Unlimited / 450 / 300 Voltage: 380/50 220/60 3P Po...
2023 | 300047940 | HAULIAN MACHINERY
More information
Pouch making machine. Bag length min/max : Minimum Bag size Possible: 150mm (W) x 610mm (L) and Maximum Bag size as 1020 mm (W) x 610 mm (L) Welding width : Sealing tools are of 16 mm ( So, on Pouch each side can be of 8 mm width ) Bag Types: Three Side seal Vacuum Pouch...
2016 | 300048047 | MAMATA
More information
Complete PET filling line for still water. Complete Sipa-Melegari still water filling line, year 2000-2015 Capacity: 5,000 bph Includes: - Blower SIPA SFL 4/4, year 2015 (6,500 bph) - SIG Simonazzi 1R 9.24.126.107 rinser, year 2004 (5,000 bph) - Filler Melegari Isojet 35-7-AOR, year 2000 (...
2000 | 300046999 | MELEGARI
More information
Label flexo printing machines. 8 colors printing machine mainly producing shrink sleeves. Fully servo driven and temperature control system Automatic pre-register and auto register Driven chill drums Motorised roll lifting unwinder Servo infeed group 2 Die cutting station ( one wi...
2015 | 300048061 | GIDUE
More information
Bottle inspector. Empty bottle inspector KRONES Linatronic 735 Year of manufacture: 2004 The machine could check: - colour - shape - bottom - wall - bottle top/neck - foreign bodies - leach residue - scuffing Formats: - 100 cl - 92 cl (green bottle with crown ...
2004 | 300048074 | KRONES
More information
Winder for flexibles tubes and profiles. Mazzoni Machinery Turbo 800F 6BR 2009 Automatic winder for flexible pipes, spiral hoses, corrugated hoses, and hoses with an outside diameter of 8 mm to 40 mm. After winding, the roll bundle is wrapped in stretch film and, if necessary, automaticall...
2009 | 300048076 | MAZZONI
More information
Coextrusion lines. COEX FLEX coextrusion unit specifically for FFS application Minimum and maximum film thickness 20 - 200 microns Extruders 2x 65/30D 1x 90/30D Fixed head COEX flex TE502 IBC (FFS), die plate 180 mm Internal cooling control (IBC) type JET 6 Non-marki...
2014 | 300048119 | MACCHI
More information
Paper bag making machines. V-bottom paper bag making machine for blank or printed paper. Servomotor control Photocell color registration system Sensors for paper web adjustment Reel installation on pneumatic shaft Reel width: 160-780mm Max. reel diameter: 1000mm Core diameter...
2019 | 300048136 | WENZHOU
More information
Cup Form-Fill & Seal machines. Cup Form Fill and Seal Machine CIMIPACK "MINI PACKFORM ECO" YEAR OF MANUFACTURE: JANUARY 2024 MACHINE LIKE NEW, USED ONLY FOR PRODUCTION TESTS WITH EMPTY MATERIAL CONSTRUCTION MATERIAL: STAINLESS STEEL VERSION: PNEUMATIC DOSER: VOLUMETRIC PUMPS ...
2024 | 300048149 | CIMIPACK
More information
Drawtape bag making machine. Materials and thicknesses: HDPE 2 x 17-40 my/ 4x17-20 my LDPE 2x25-80 my /4x20-40 my Max diameter reel: 1100 mm Photo cell for printed bags Bag width range: 380 - 850 mm Final rolls width: max. 280 mm Final rolls diameter: max. 150 mm Cycle speed (m...
2008 | 300048148 | LEMO
More information
Dairy bottling machinery. Volumetric Servo Filling Machine Alfatec (6 Heads), year 2020 Rinser/ 6 nozzles filler / cap sorter machine for liquid or viscous material such as yogurt, Greek yogurt or smoothie in jar glass container (200 ml - 2 liter) type of products to be...
2020 | 300048182 | ALFATEC
More information
Equipment for In-Mould Decoration (IMD). IML decoration robot for 6-cavity mould Capacity of the container to be decorated: 120 ml Extraction function from the mould. (Can be used without decorating.) These robots are designed specifically for a product or group of products. This robot ...
2011 | 300048186 | OTTO HOFSTETTER
More information
Mono extrusion lines. Rotating die head with two die plates (200 and 280 mm) Gravimetric dosing unit with two stations Minimum thicknesses: 30 my Maximum thicknesses: 180 my Corona treatment Fixed haul-off Tower 4 expansion shafts for 50 inner diameter cores....
2011 | 300048187 | DIING KUEN
More information
Pouch making machine. Production of vacuum bags with 3 seals. Maximum reel diameter: 1000mm Maximum reel width: 900 mm Minimum bag dimension (width x length): 80 x120 mm Maximum bag dimension (width x length): 400 x 900 mm 4 longitudinal sealing bars 3 transverse sealing ...
2014 | 300048213 | ELBA
More information
PET labelling machine. Sidel Roll Quatro label F35 from 2010 24 pressurized head system It runs 20 oz at 500 bpm They have an upgraded glue roller on it for reduced glue consumption They also have several formats (change parts ) that they can sell for extra with the l...
2010 | 300048227 | SIDEL
More information
Injection molding machine from 250 T up to 500 T . Working hours (feb. 2025) ca. 3.000 Includes: Krauss maffei linear robot LRX 150 Year 2022...
2022 | 300048242 | KRAUSS MAFFEI
More information
Shredder. Vecoplan VAZ2000 M NF-T One shaft with pusher Working hours: 12437 Rotor: 2000 mm x 640mm Cutter house: 42 rotor knives & 5 stator knives Motor : 134 kW Screen size:100 mm hole installed - 30mm in stock brand new Output: 4000 kg/h paper and cardbo...
2008 | 300048276 | VECOPLAN
More information
Laminators. Working width: 700mm Material width: 720mm Primary and secondary unwinder diameter: 800mm Rewinder diameter: 800mm Mechanical speed: 250 m/min Unwinder core diameter : 152mm Rewinding core diameter : 152mm Corona treatment not included but available...
2012 | 300048325 | GENERAL CONVERTING
More information
Cooling tank. Qu. 3 Spray Bath SB-400/5,9-E length 5900mm usable for pipe diameter 90 - 400mm design with curtains at the side left hand operating side incl. 4x roller supports, usable for pipe 90 - 400mm (in steps acc. DIN) (special design with additional posi...
2016 | 300048335 | TECNOMATIC
More information
Washing plant drier. Application A Crystallization of PET flakes Application B Crystallization/drying/decontamination according to FDA Food Grade Material PET post-consumer bottle flakes Material properties Free flowing Grain size 2 – 10 mm Bulk density Average 0.3 ...
2022 | 300048363 | KREYENBORG
More information
Label sheeter - cross cutting. Label finishing machine with two flexo units with semi-rotary die, hot stamping, dry punching, screen unit + dies The MIDA MA 350 is a pre-printed label finishing machine that combines flatbed and rotary modules on an advanced semi-rotary platform. ...
2015 | 300048393 | MIDA
More information
Twin-screw extruder for PE/PP compounds. Working hours (April 2025) 24,821 Main motor 108 kW With side feeder + die face cutting head...
2017 | 300048454 | MARIS
More information
Coextrusion lines. 7 layers extrusion line Screws Diameter mm 50 x 5,40 x 2 , L D 32 Gravimetric dosing unit Plastcontrol (1+3/1+2/1+2/1+2/1+2/1+2/1+3) Die Diameter mm 400- 2.4 gap with IBC Thickness control system Oscillating take off, max working width 1500 mm Anti c...
2019 | 300048478 | RAJOO
More information
Anilox - cylinders and plates washer. Max. diameter: 300 mm Max. washing length: 2500 mm Max weight: 600 Kg Number of anilox per washing: 1 Control system: PLC...
2011 | 300048486 | FLEXO WASH
More information
Pouch making machine. 1020 Wide Servo Driven Dual Unwinder with Dual Pivot Dancer.. - Two Independent Servo Drive - Air Shaft and Safety Chucks - Film reel exhaust sensor - Independent dancer for running two separate film Trim Winder 2 Side slitters on Single bar Long S...
2020 | 300048411 | MAMATA
More information
Stretch blow moulding machines. Stretch Blow Molding Machine KRONES Contiform S14 Year 2014 Working Hours 32.886 approx Type of Neck: PCO1881 Auxiliaries Included: - Chiller - Hopper - Preform Loader, Elevator & Unscrambler - Leak & Vision Inspector. Brand P&S Tech / M...
2014 | 300044213 | KRONES
More information
Stretch blow moulding machines. Stretch Blow Molding Machine KRONES Contiform C312 PRO Working Hours 25.046 approx Type of Neck: PCO1881 Auxiliaries Included: - Chiller - Hopper - Preform Loader, Elevator & Unscrambler - Leak & Vision Inspector. Brand P&S Tech / Model: PS21- ...
2016 | 300048510 | KRONES
More information
Circular looms. Price per unit There are 54 looms year 2011, 54 year 2012 and 54 year 2013 available Specially designed to weave endless tubular or flat cloth out of PP or HDPE tapes Two creels to be fitted with warp bobbins Warp infeed system Warp breack detecting...
2011 | 300048540 | STARLINGER
More information
Stretch film extrusion line. 9-LAYER COEXTRUSION CAST-FILM ALLrollEX® 3000 mm LINE FOR THE PRODUCTION OF STRETCH-FILM, NET WIDTH 3000 mm IN HAND, MACHINE AND JUMBO REELS Type of structure in coextrusion: ABCEDECFG Reel width formats : 6 x 500 mm Thickness min.-max of film : 8µ...
2020 | 300048591 | COLINES
More information
Bag filling machine. Bag in box filling machine Technibag 750 B-Booster from 2015 For filling juice, liquids, beverages, water Worked only 300 000 bags x 3 liters with apple juice Can fill bags - 3 , 5 , 10 and 20 liters Capacity - 3L bags - 720 pcs / h Touch Control...
2015 | 300048598 | TECHNIBAG
More information
Injection molding machine up to 250 T . Multilift/robot included...
2012 | 300048604 | ARBURG
More information
Corrugator for pipes and tubes. Itib FV 700 Corrugator- shuttle system for producing double wall corrugated pipes (HDPE/PP) DN/OD 400; 500; 630 mm DN/ID 300; 400; 500; 600 mm Speed: from 0.6 m/min to 1.65 m/min Capacity: from 410 kg/h to 550 kg/h Molds: each dimension includes 9 pa...
2015 | 300048605 | ITIB
More information
Washing plant. Ekolinia WE 200 PE and PP washing line Line components: 1. Washing/separating tank for flakes 2. Mechanical dryer – for preliminary drying 3. Mechanical dryer – for final drying 4. Discharging suction system Water consumption: 1-2 m³/h Final surfac...
2019 | 300048618 | EKOLINIA SP.
More information
Complete PET filling line for sparkling water. Products: still and sparkling water Bottle type (basic): from 0.5 l to 2.0 l volume PET closing type: 28mm Labels: Plastic Roll Fed Line capacity - 22.000 bottles/h The capacity is calculated on the basis of a 0.5 l PET bottle Formats available:...
2006 | 300048628 | KRONES
More information
Extrusion lines for nonwovens. Line for the production of meltblown nonwovens, with 1 meltblown beam, 1600 mm nom. width with winding system Fabric weight: 10-80 gsm Resin for MB: PP, MFI 230/2.16 > 400 g/10 min Throughput: MB: PP max. 65 kg/h/m Installed line speed: 5 - 80 m/...
2021 | 300048655 | REICOFIL
More information
Filler for pouches. Used milk pouch filler BUANLIR BU 604. Year 2004 (refurbished in 2023) Working hours: Aprox, 45.000 Package formats:150 ml / 200 ml / 250 ml / 500 ml / 1 litre Type of filling: Ultra clean Shelf life: 45 days CIP included in price Cleaning: Water...
2004 | 300048515 | BUANLIR
More information
Pouch making machine. Bag length min/max : Minimum Bag size Possible: 150mm (W) x 610mm (L) and Maximum Bag size as 1020 mm (W) x 610 mm (L) Welding width : Sealing tools are of 16 mm ( So, on Pouch each side can be of 8 mm width ) Bag Types: Three Side seal Vacuum Pouch...
2017 | 300041012 | MAMATA
More information
Complete filling lines for carbonated drinks. Complete filling line for carbonated and non-carbonated waters and beverages for PET The line is versatile, capacities from 250 ml to 2,000 ml with FLAT and SPORT cap applications. Capacity: 10.000 bph (1,5L) Includes: - Blower Sidel SBO 8 from ...
1999 | 300048620 | SIDEL
More information
Other Machines. Press designed for high-precision off-line proofing of gravure cylinders. MACHINE CAPACITY Proof length : 2600 mm Min. circumference : 300 mm Max. circumference : 1000 mm Face width : 1300 mm Cylinder Cylinder weight : 300 Kg max. Locate on solid ...
2017 | 300048685 | JM HEAFORD
More information
Thermoformer. Max sheet size: 920 x 1110 mm Min sheet size: 350 x 420 mm Max mold height: H500 mm Hours worked: approximately about 30.000h Halogen lamps...
2008 | 300048708 | GEISS
More information
Complete PET filling line for still water. Products: still water without gas Bottle type (basic): from 0.5 l to 2.0 l volume PET closing type: PP screw-cap 30/25 Labels: Pre cutted Package format: 500ml / 24pack shrink film, 1500ml/ 6pack shrink film Tray: Euro-type Line capacity - 6.000...
2005 | 300048709 | MELEGARI
More information
Other Machines. Fully automatic rewinder for Parchment paper and Preparation paper. Fully automatic machine with pneumatic control and PLC system for the production of small diameter rolls. Winding material: Parchment paper and Preparation paper. Paper thickness: 1...
2006 | 300048711 | LUDWIG BRÜCHER
More information
Single screw repelletizing line. Max. Output (Capacity): PP : 500 kg/h PE : 400 kg/h Other specs: Material : LLDPE, LDPE, HDPE, PP 2 die plates available: one for PE and one for PP Belt conveyor Double layer all metal detector Intarema process combination Erema air flush technol...
2017 | 300048725 | EREMA
More information
Laminators. Used only 6 month since installed in 2022 Coated width: 1315mm Max web width: 1300mm Max core width with expanding chucks: 1300mm Max core width with Standalone cones: 1340mm Min web width: 650mm Core size: 76 and 152mm unwinder and rewinder Max web...
2021 | 300048745 | NORDMECCANICA
More information
Digital printing machines. CMYK four-color printing press for plastic film or paper, on rolls. The machine prints a wide range of substrates (laminated film, PE, PET, cardboard, paper, etc.), with a maximum material thickness of 400 microns. Digital rotary press Digital four-...
2015 | 300048750 | MARKEM IMAJE
More information
Injection molding machine from 500 T up to 1000 T. Injection molding machine JIT(Tederic) Toggle type. 700 TON Injection Rate into air - 546/625 grm/sec Injection Speed - 91/108 mms Screw Speed - 125/149 RPM Max Pump Pressure - 17.5 MPa Pump Motor Power - 67/80 KW Heater Power - 44/55 KW...
2016 | 300048761 | JIT PLASTIC MACHINERY
More information
Sheet coextrusion lines. Production line for the 3-layer PET rigid film The line was in continuous production until end of 2024. Line with two single-screw extruders for ABA film production, Large extruder: 120 mm, L/D: 38:1 Dosing unit 5 components :2 main; 1 for trims,...
2005 | 300048730 | UNION
More information
Mixer. Used Mixer for beverages Krones K 536-247 Year: 1997 capacity 12,000 bph (2.0 L PET) machine in working condition until end of October 2025 ...
1997 | 300048774 | KRONES
More information
Extrusion Blow Moulding machines up to 2 L . includes: exit conveyor, low conveyor and grinder...
2001 | 300048794 | MAGIC
More information
Extrusion line for PE/PP pipes. Die head tools: 32, 40, 50, 63, 75, 90, 110 mm. Calibration tools: 32, 40, 50, 63, 75, 90, 110 mm. Tilting table CINCINNATI EXTRUSION Year of production: 2002 Lenght: 12 m....
2002 | 300048710 | CINCINNATI EXTRUSION
More information
Laminators. Max. web width: 1330 mm Min. web width: 650 mm Max. web tension: - Unwinder: 40 kg (440 N) - Rewinder: 55 kg (550 N) Min. web tension: - Unwinder: 2 kg (20 N) - Rewinder: 4 kg (40 N) Coated web thickness: - BOPP: 12-80 μm - PETP: 10-30 μm - LDPE, ...
2012 | 300048825 | NORDMECCANICA
More information
Agglomerator. Capacity: depends on the input material from 350–600 kg/h The device is complete, fully functional. Working hours on 10/07/2025: 573 hrs The machinery is complete including: · Input conveyor · Screening equipment for fine fraction · Cooler · Wear pa...
2014 | 300048828 | PALLMANN
More information
Ice Cream Machinery. Complete Ice Cream making line Technogel, year 2018 Including: - 2 x 600 kg Technogel coocking machines - Pasteurizer+homogenizer - 2 x 600kg aging vats - CIP - Continuous freezer Technogel 750 LP (20 kW, 37 Amp, cooling agen Freon R404) - Maturati...
2018 | 300048832 | TECHNOGEL
More information
SIG Combibloc line. Complete SIG Combibloc CFA1224 Aseptic carton filling line Speed: 26,500 packs per hour Model: CFA1224 Volumes 65ML, 125ML and 200ML Includes: - Filling Machine SIG Combibloc CFA1224 - Conversion Kit for filler speed up (from 24.000 pph to 26.5...
2023 | 300048857 | SIG COMBIBLOC
More information
Single-screw extruder for PVC. ...
2011 | 300048859 | TECNOVA
More information
Injection stretch blow moulding machines for PET bottles. Used Nissei 70DPW injection stretch blow molding machine Year 2015 Includes: Dehumidifier PET loader and dryer Chiller Motan masterbatch auto loader 20 cavity preform injection molds 12g and 10.5g 20 cavity blow molds 120ml and 60ml Available i...
2015 | 300048867 | NISSEI ASB
More information
Stretch blow moulding machines. Blower for PET bottles FlexBlow FB4 from 2010 Capacity hasta 6.000 bph (250ml) Round and square PET bottles (125, 250, 750 ml), HDPE cap 4 cavities. Mold for 250 ml bottle included. There are other molds for extra price. Includes: - dumper - prefo...
2020 | 300048877 | TEREKAS
More information
Bi-Injection moulding machine. control system, Demag, type NC4, accessories: - turntable 460 mm, currently dismantled, - linear handling system, Demag, type W731-0330, year 2008, travel X/Y/Z 800 x 1,400 x 2,500 mm, out of operation, machine enclosure Minimum daylight: 250 m...
2008 | 300048902 | DEMAG
More information
Injection molding machine up to 250 T . Working hours: 1200 h (July 2025)...
2018 | 300048944 | ZHAFIR
More information
Bi-Injection moulding machine. Handling model: KUKA KR60 – Lifting capacity: 60 kg Locating ring diameter: 200 mm Extruder 2 mounted in L-position Hot runner control points: 36 Hydraulic cores: 4...
2010 | 300048950 | DEMAG
More information
Sorting and separating plant. -Type : Electrostatic separator EBS-2-27/250-16.162 -Use : separation of polymers based on electrostatics -Capacity : max throughput 1800kg/h -The device is functional -The machinery is complete including : ·input conveyor ·control cabinet with ...
2016 | 300048958 | PRODECOLOGIA UA
More information
Complete PET filling line for still water. Products: still water Bottle type (basic): from 0.5L to 2.0L volume PET closure type: 29/25 Labels: Plastic Roll Fed Line capacity - 16.500 bottles/h The capacity is calculated on the basis of a 1.5L PET bottle Formats available: 1.5L Working H...
2007 | 300048959 | KRONES
More information
Complete Non-carbonated Aseptic Filling Line for drinks. Products: Fruit Drinks, Juices, Nectars, Smoothies, Fresh Milk, Powdered Milk, Flavored Milk, Aseptic Water, Flavored water Bottle type (basic): from 0.25 l to 1.00 l volume PET closing type: 38mm Labels: Sleever only Package format: 3x2, packed i...
2011 | 300048970 | SIDEL
More information
Grinder - Granulator. Working hours : ± 500 hours Power : Main motor = 37kW – 66.5A Blower = 5,5kW – 18.5A Opening mouth by hydraulic cylinder Big-bag station 1500x1500 for big bag 1200x1200x2200mm Electrical cabinet : PLC Siemens S7-1200 Others component SCHNEIDER ...
2023 | 300048975 | SEVENSTARS MACHINERY
More information
Label sheeter - cross cutting. CONVERPRESS die cutting machine equipped with flexo unit. Ideal for die-cutting jobs or labels requiring one ink. Maximum paper width 265mm, maximum printing width 250mm. Maximum speed: 115m/m Machine equipment -Unwinding shaft -Splicing table -We...
2004 | 300048986 | CONVERPRESS
More information
Injection molding machine up to 250 T . Vertical injection press Rotating table 3 stations Diameter table 1150 mm 4,244 working hours Available for sale 2x TURRA FTV 80 Vertical 2 or 3 stations year 2000 and 2001 (price and info upon request)...
2019 | 300048994 | TURRA
More information
Complete filling line for fountain water (19 L). Used Bardi filler for 5 gallons watercoolers filling Output: 1500bph Formats: 3-5 gallons Decapper Washer Monobloc Bardi 5 heads Capping unit: Press-On 55mm neck NOT included labeller, depalletizer and palletizer The machine will be disma...
2009 | 300048997 | BARDI
More information
Slitter-rewinders for Adhesive Tapes. Auto cutting machine (single blade for single shaft) suitable for various tape such as PVC, Masking, Double side, OPP packaging and foam tapes, etc. Roller width : 1700mm Cutting width : 1mm-1600mm Paper core ID : min 26mm diameter - max 77mm diamete...
1998 | 300049000 | WEBTEC
More information
Single screw repelletizing line. Machine was at Erema Customer Centre till 2022 Run washed LDPE flakes and occasionally clean dry LDPE materials. Operating hours: only 21 973 hours Cutter-compactor motor: 90 kW Equipment : Water pump Heat exchanger Centrifuge Extraction blower ...
2013 | 300049011 | EREMA
More information
Special welding machines. Forming and welding heat shrinkable sleeves machine Unwinder equipped with 3" shaft Rewinder equipped with 6" shaft BST system for lay-flat control Max lay-flat. 270 mm Totally overhauled mechanically and electronically in 2025...
2004 | 300049013 | DCM
More information
Injection stretch blow moulding machines for PET bottles. Aoki ISBM SBIII - 250LL - 50S Includes: Mitsubishi inverter Colour mixer Hopper and loader Compressor 57.000 hours In production and available immediately! ...
2016 | 300049016 | AOKI
More information
Digital printing machines. Printing speed: 68 four-color 8,5 x 11 in pages per minutes (two-up) 90 color 8,5 x 11 in pages per minute in EPM (two-up) 136 two-color 8,5 x 11 in pages per minute (two-up) 272 full monochrome 8,5x11 in pages per minute (two-up) Image resolution:...
2016 | 300049042 | HP INDIGO
More information
Coextrusion lines. 7-layers extrusion line Vacuum-Suction Blower Type 600-45.9/ 50 Hz Dosing Unit: Extruder A: Main Comp. / 3 Side Comp. Extruder B: Main Comp. / 1 Side Comp. Extruder C: Main Comp. / 1 Side Comp. Extruder D: Main Comp. / 3 Side Comp. Extruder E: M...
2015 | 300049046 | REIFENHAUSER
More information
Stretch blow moulding machines. used Siapi stretch blow molding machines Siapi (made in Italy) Model: EA 4/5 Year: 2011 neck: 30/25 machine stopped ...
2011 | 300049055 | SIAPI
More information
Injection moulding machine for PET preforms. Niigon NPET 300 E120/ P120 IMM for PET preforms from year 2019 Only machine, does not include auxiliaries and mold In very good condition and available immediately!...
2019 | 300049050 | NIIGON
More information
Coextrusion lines. Thickness range: 20 – 250um Gravimetric Inoex Dosing System, 4 components per extruder Screws Diam and L/D 60/90/60.30D Fixed die Head 630mm with IBC , Gap 1.25, 2.25 mm Air Ring type Multicool Profile control with OPTIFIL P2K CRP Rollers for th...
2008 | 300049067 | WINDMÖLLER & HÖLSCHER
More information
Beer filling. Used complete filling for glass bottles Product: Beer Formats: 0,33lt Production: 1.500 bph with at 0° to +4° C with max 5 of CO2 Includes the following machines: · AUTOMATIC LINEAR SELF-ADHESIVE LABELLER · ISOBARIC TRIBLOC FOR BOTTLES ONLY, Cime...
2024 | 300049071 | CIMEC
More information
Wrap Around case packers. Used Wrap Around case Packer Brand: Meypack Model: VP 531 Production: 60 cycle/min Machine installed but not running...
2010 | 300049081 | MEYPACK
More information
PET labelling machine. Used labeller Krones Contiroll Year 2010 Format: 0,33l Production: up to 40.000 bph Machine stopped and available immediately! ...
2010 | 300049084 | KRONES
More information
Shredder. Cleaned and overhauled in 2025. Type: One shaft with pusher Cutter house: 75 cutter knives 4 stator knives Dimension of cutters: 60x60 mm Nominal speed rotor: 200 rpm Rotor speed range: 100-300 UPM Motor: 132 kW Screen size: 65 mm HEX Diameter of s...
2022 | 300049019 | VECOPLAN
More information
Double-shaft film slitter-rewinders. Materials: Film, printed/coated or metallized/laminated paper Thicknesses: 10-500 my Shaftless unwinder with servo motor Banana roller Circular and standard blades Core positioning system: manual laser Web guide Trim removal system...
2016 | 300049137 | TEMAC
More information
Label flexo printing machines. The machine Gallus EM 510 S can be used to produce self-adhesive and monofoil labels as well as a wide range of other products. Unwinder with pneumatical lift Reel weight (max.): 500 kg Splicing table with web clamping Electro-pneumatic dancer sys...
2010 | 300048961 | GALLUS
More information
Grinder - Granulator. Model G400-60 KU · Cutting chamber (CH) 5th · Cutting chamber width 620 x 450 mm (G400-60 CH 5th) · Fixed blades 2 pcs (2nd & 5th) · 3-blade rotor · Rotating blades 3 pcs / 1x3 (3-bl) · Grid Ø8mm · Voltage 400V / 50Hz, 3-phase. · Motor 30kW · Flywh...
2012 | 300049158 | RAPID
More information
Extrusion Blow Moulding machines up to 2 L . ...
2000 | 300049164 | MAGIC
More information
Other Machines for Drinks. KHS Plasmax 12D 2021 coating machine Deposits glass on the inside of a PET bottle to achieve barrier properties Enables the filled product to have the long shelf life customers demand without making any compromises whatsoever with regard to qualit...
2021 | 300049175 | KHS
More information
Accumulation Head Extrusion blow moulding machine. Extrusion Blow Molding Line Hours in Production (as of 25/06/2025): 52,000 h Clamping Unit Clamping Force: 1200 kN Clamping System: Synchronous, with 2 tie-bars fixed diagonally Tie-Bar Diameter: 115 mm Clamping Speed: 400 mm/s Maximum Operating Pr...
2007 | 300049133 | KAUTEX
More information
Injection moulding machine for multicolour parts. ...
2001 | 300049189 | MAIN GROUP
More information
Injection molding machine up to 250 T . ...
2017 | 300049192 | ENGEL
More information
Injection molding machine from 500 T up to 1000 T. WINTEC / ENGEL t-win 6500-7000 AM Brand/Model: Wintec/Engel t-win 6500-7000 AM Year: 2022 Origin: Made in China (Engel Machinery, Changzhou) Type: Servo-hydraulic, dual platen Included: Core-pulls, valve gate interface, 16-zone mold heating, air-blow...
2022 | 300049193 | WINTEC
More information
Double-shaft film slitter-rewinders. Slitter rewinder with double auto automatic shafts on rewinder Materials Pe from 20 my Paper Max 120 gr/m2 Alu from 20 my Paper+PE from 20 my Min width 500 mm Razor and Circular blades Shafts: Unwinder 76 and 152 mm, rewinder 75 mm Availability F...
2002 | 300049198 | USIMECA
More information
Robot. Brand new and still packed...
2021 | 300049200 | SEPRO
More information
Complete downstream lines for profiles. Few working hours Scope of delivery 1x Calibration table: Red.Cal 11, 2 - 3P/12 GW Technical data: Clamping frame length 11185 mm Clamping frame width 380 mm Clamping frame height min. 940 mm Clamping frame height max. 1,040 mm Clamping frame rai...
2018 | 300049208 | GREINER
More information
Extrusion Blow Moulding machines up to 2 L . Includes material loader Plastics Systems model VLM5 year 2018 and exit conveyors...
2020 | 300049214 | PLASTIBLOW
More information
Extrusion line for corrugated pipes. Complete used Corrugator extrusion line Tip: UNICOR UC 1000/9 iV Year of building: 2000, for corrugated PP / PE double wall pipes up to max. 1000 mm OD, 230/400 V, 50 Hz. The production line is capable of producing corrugated pipes DN/ID 300, 40...
2000 | 300033840 | UNICOR
More information
10 Colours CI Flexo Printing Machines. Mechanical speed 500 mt/min Solvent and water based inks Double automatic rewinder and unwinder, reels max 800 mm Automatic washing system speedy clean Viscosimeters Video system AVT Jupiter Dual Mode with register and defects control Web guide befor...
2009 | 300035399 | FLEXOTECNICA
More information
Air Compressors (High Pressure). High pressure AF CE 2B compressor, year 2004 Speed: 650 rpm Capacity: 230 cfm It includes: dryer, airtank and chiller....
2004 | 300034165 | ATELIER FRANÇOIS
More information
Thermoformer. Maximum knife length: 5000 mm Maximum sheet width: 533 mm Maximum material roll diameter: 1000 mm Thermoplastic materials processed on the machine: PP, BOPS, OPS, GPPS, PS, HIPS, PVC, PET Maximum dry cycles (without material) per minute: 50 Main...
2016 | 300038070 | GN
More information
Rotogravure printing machines. left to right handled web width 480 mm - 1020 mm printing repeat min-max : 350-820 mm inner core diameter unwinder 70,76 inner core diameter rewinder 70,76 mm adaptors for inner core diameter 150 mm on unwinder Automatic splicing unwinder and rewi...
1988 | 300038098 | ROTOMEC
More information
T-Shirt flat bag making machine. Machine for t-shirt bags HDPE; LDPE and BIO Bag width max 320 mm Web guide...
2005 | 300038208 | SGS
More information
Moulds. Year of production: 2003-2005...
| 300038708 | ROSSI STAMP
More information
Cup printing machines. Production: 16 000 cups/h Taper of container: from 3 to 10 degrees Max print area cliche holder roller: 325 mm Max Clichè holder roller diameter: 335 mm Total clichè lenght: 375 mm Central roller diameter: 335 mm No. of panels of central roller: 3 U...
2003 | 300039522 | MOSS
More information
Cup printing machines. Production: 16 000 cups/h Taper of container: from 3 to 10 degrees Max print area cliche holder roller: 325 mm Max Clichè holder roller diameter: 335 mm Total clichè lenght: 375 mm Central roller diameter: 335 mm No. of panels of central roller: 3 M...
1997 | 300039524 | MOSS
More information
Cup printing machines. Production: 16 000 cups/h Taper of container: from 3 to 10 degrees Max print area cliche holder roller: 325 mm Max Clichè holder roller diameter: 335 mm Total clichè lenght: 375 mm Central roller diameter: 600 mm No. of panels of central roller: 4 E...
2003 | 300039521 | MOSS
More information
Stretch blow moulding machines. Blow molder Sacmi SBF 408 - 2012 8 cavities production 21,600 b/h running with 500ml Availble in April Includes: hopper, chiller, feeder and molds for 500ml ...
2012 | 300039706 | SACMI
More information
Accumulation Head Extrusion blow moulding machine. Available 2 machines (originally built in 1981 and 1989 and fully overhauled - mechanical/electronic NEW in 2014) Max. mould width 600 mm Max. mould length 950 mm Daylight opening 300 / 800 mm Max. mould depth 2 x 160 mm Clamping force 250kN · A...
2014 | 300040528 | KAUTEX
More information
Other Machines. SOMA machinery for die cutting aluminium lids with 2 knurling rollers (worm and needle type) and 2 cutting matrix brand Rold (75,5 mm and 95,5 mm) + ELKON machinery to make tests and welding trial of aluminium lids. Machinery and equipment are produc...
2009 | 300040703 | SOMA
More information
Stretch blow moulding machines. Nissei ASB HSB-10 Hot Fill Stretch Blow Molding Machine Working Hours 20,817 Type of Neck 28 MM Type of Mould available 350 ML Number of cavity of blowing ...
2008 | 300041450 | NISSEI ASB
More information
Printing machines for food and beverages caps. Printing machine for caps MOSS MO-3062/3 (Italy) Capacity up to 72000 pieces per hour Printing machines for caps of PCO1881 and 1810 standards Possibility of applying three-color printing...
2012 | 300041621 | MOSS
More information
Other Machines. Indexing tables for gluing thin panels, HPL or other rigid or semi-rigid sheets on MDF or PB panels...
2007 | 300041647 | BARBERAN
More information
T-Shirt flat bag making machine. Length of bags : Min : 320 mm Max :700 mm (1200mm open mouth) Max mechanical speed : 200 strokes / minute Film speed max : 160 m/min Material : LDPE, HDPE, BIO , LLDPE and recycled Photocell Antistatic bar Gusset device Pick-up table It can produce ...
1998 | 300042489 | SALDOFLEX
More information
Cheese equipment. CMT mozzarella cheese making line Vapour stretching machine CMT Discovery R200, YoM 2015 Cheese Making Vats CMT P50, YoM 2015 Moulding machine CMT H4JM R/L, YoM 2015 Production rate: 600-1000 kg/h on different type of cheese production The mach...
2015 | 300042526 | CMT
More information
Stretch film extrusion line. 3-layer extruder suitable for the production of Manual and automatic Stretch Film. PP Cast film PE film for printing, lamination and sealing. Material thickness: 18 to 100 my Production LDPE: up to 500 kg/h PP: up to 450 kg/h Working hours ap...
2002 | 300040678 | SML
More information
Thermoformer. Maximum knife length: 5000 mm Maximum sheet width: 533 mm Maximum material roll diameter: 1000 mm Thermoplastic materials processed on the machine: PP, BOPS, OPS, GPPS, PS, HIPS, PVC, PET Maximum dry cycles (without material) per minute: 50 Main...
2017 | 300038069 | GN
More information
Saw for profiles. Cutting unit under vertical and transverse base and with pneumatic carriage movement max. profile dimensions: Width = 532,2 mm Height = 10,5 mm...
2015 | 300042679 | BARUFFALDI
More information
Letterpresses. 6 colors (2 colors needs maintenance) + 1 UV Flexo varnishing Max. material width : 217mm Drying system : UV drying Mechanical speed max : 100 m/min (normal working speed 30-40 meters per minute) 3 rotary die cutter 1 flat die cutter Web cleaner R...
1991 | 300042874 | NILPETER
More information
Winder for flexibles tubes and profiles. Pipe material: HDPE Pipe type: smooth Pipe diameter: Ø50 - Ø110 Winder type: double The coil is secured MANUALLY by a strap machine using plastic tape Speed min/max (m/min): 15 (can be adjusted) Number of arms: 6 A: 350/1000 mm B: 600 mm D: In...
2019 | 300043258 | HF HAYTEK
More information
Label sheeter - cross cutting. Web Width: 330 mm Flexo Varnishing Unit: 1 unit Rotary Die-Cutting Unit: Equipped with a K&B GapMaster system Maximum Unwind Roll Diameter: 700 mm Running Speed: Up to 36 meters per minute at a 300 mm repeat length Plate Cylinder Flexo Sizes: Minimum...
2010 | 300035130 | ABG
More information
Coextrusion lines. 3x 45 mm extruders The min-max width would be 300-1200mm, and the min-max thickness 30-500 microns. AFS corona treater Vollmann gravimetric system Rotating die head 195 mm with IBC Gap 1mm Air Ring manual; Octagon Smart lip Thickness control system n...
1997 | 300043507 | KUHNE
More information
Homogenizer. Homogenizer for milk FBF 7075 Capacity: 8,000 l/h Double stage Maximum working temperature: 90ºC Maximum pressure: 250 bar Working hours: 7216 Can be converted to aseptic by the manufacturer at surcharge Machine is dismantled and stored...
2014 | 300043731 | FBF
More information
Other Machines. The minimum size of the box produced is 55x45x10mm, the maximum size is 400x300x80mm. Condition as new - the machine has undergone a test run, but the production line was decommissioned prior to commissioning. Parameters: * power: 5kW; * air inta...
2019 | 300043753 | HONGMING
More information
Digital printing machines. HP Indigo Press 5000 - Three section paper feed - 5 colors - 55,060,043 Impressions - Autoduplex - HP Control PC with prepress software vers. 7.x - Print speed: 4,000 A4 pages 4/0 per hour - Max. Resolution: 812 x 1,624 dpi in HDI mode - Max. paper ...
2007 | 300043838 | HP INDIGO
More information
Other Machines. Labeling machine Thermoware THW LB100 complete with: Automatic system for feeding the cups into the machine Head for mandrels and a head for labeling equipment Label wrapping system with upper label clamp, lower label clamp with small left and right ...
2020 | 300043887 | THERMOWARE
More information
Thermoformer. Includes a 95 mm diameter HIPS cup mould and 14 sets of interchangeable insert parts with capacities from 0.2 to 0.5 litres Maximum material width: 525 mm Clamping force: 15 000 daN Number of cycles: 40/min....
1987 | 300043886 | ILLIG
More information
Injection molding machine from 1000 T. Accumulators Koch dosing unit...
2004 | 300043936 | HUSKY
More information
Mono extrusion lines. Thickness range: 0,012 - 0,150 Rotating Die Head Gusseting device: Yes Fixed Haul Off Web guide: straight edge Corona treatment: Yes Max. reel diameter: 550 мм....
2001 | 300043932 | KWEEN B
More information
Mono extrusion lines. Film thickness range min.-max.: 0,006-0,020 Fixed Die Head Gusseting device: Yes Fixed Haul Off Corona treatment: Yes Max. reel diameter: 500 мм PLC interface language: English Screws were replaced Second identical line is available at the same pric...
2000 | 300043931 | KWEEN B
More information
Blister and Skin. Max working area : 350x250mm Max blister depth / height of sealing receiver : 130mm Number of sealing receivers : 4 Electrical consumption of sealing heater : 1.75 kW Total electrical consumption : 2.15 kW Sealing force : 13 kN It is in excellent wor...
1989 | 300044091 | ILLIG
More information
Loop handle bag making machine. Max roll diameter 1300mm Max roll width 1400mm Roll weight max 17200N Core inner diamater 76mm Handle film: Max roll diameter 750mm Core inner diameter 76mm Roll width 350mm Product specifications Bag widht 250-750mm Output data: Max cycle rate 15...
2000 | 300044111 | WINDMÖLLER & HÖLSCHER
More information
Pouch making machine. Electrical Power 220/240/380/415/480 VAC +/- 6% 50/60HZ Total connected load 35KVA Air consumption : 1200L/min Water requirements : 20LPM Bag length min/max : Minimum Bag size Possible: 50mm (W) x 50mm (L) and Maximum Bag size as 1000 mm (W) x 820 m...
2015 | 300044252 | MAMATA
More information
Blister and Skin. Automatic intermittent motion blister packaging machine with a capacity of up to 15 cycles per minute. Fast format changeover, high packaging capacity and flexibility in processing different formats and materials. Sealing pallets can be changed very...
1997 | 300044275 | KOCH
More information
Injection molding machine from 500 T up to 1000 T. Full electric Engel E-Duo 1340/700 PICO...
2014 | 300044319 | ENGEL
More information
Injection moulding machine for food and beverages caps. Used Netstal SynErgy 3500-3700 E from 2007 Clamping force 3500 kN Screw diameter 80 mm Plate dimensions 1050x1150 Clearance between columns 720x720 Mould hight 600-950 Opening stroke 0-700 Motor power 90 kW Heating power 53,5 kW Dimensions 9,65x2,33...
2007 | 300044202 | NETSTAL
More information
Other Dairy Machine Type. Pentair Codeline pressure vessels for Reverse Osmosis - 80A series year 2019 Operating Parameters: -pressure 120-300 Psig -water recovery: 75-85% -total salt rejection: 98-99% -operating temps: 45-85º F -design temperature: 80 F -minimum inlet pres...
2019 | 300044517 | PENTAIR WATER, CODELINE
More information
Injection molding machine up to 250 T . ...
2001 | 300044536 | KRAUSS MAFFEI
More information
Thermoformer. Max Tool dimensions: 516 x 366 mm Forming height above - below Material: 120/40 mm Maximum sheet width: 545 mm Stacker A/B Max. cycles/min: 35...
2002 | 300044572 | KIEFEL
More information
Monoaxial Oriented Line MDO. Line for the production of Oriented PP-/PE-/foamed-/breathable film Max. reel diam. at unwinder: 1200 mm at a material density of 0,9 kg/dm3. Max. reel weight: 2800 kg Max. stretching ratio is 1 : 10 Max. mechanical speed at the outlet of the stret...
2008 | 300044581 | SML
More information
Bag making machine for baby diapers bags. High Performance Bag making line for the production of Paramount bags, cross handle bags, and wicket bags For Paramount & Cross Handle bags Bag Width: 280mm – 600mm Bag Length: 300mm – 600mm For Wicket Bag Bag Width: 130mm – 420mm Bag Leng...
2013 | 300044587 | HEMINGSTONE
More information
Stretch blow moulding machines. AMSLER WAE L22 blow molder 2 cavities 1.100-1.200 bph Filling 1 ltrs pet bottles Includes Automatic preform loader but no dumper Available Feb - March 2022...
2001 | 300042208 | AMSLER EQUIPMENT INC
More information
Stretch blow moulding machines. Serac blow molding machine- SBL SL7/8 - 2020 Neck 38 7 cavities Output 10.500 u/h Still installed but not hooked up to power so cannot be shown running. In excellent condition and used for trials only...
2020 | 300044739 | SERAC
More information
Other Machines. DRUM CHIPPER for wood Manufacturer: PALMMANN Model: PHT 850x1250 Year of manufacture: 1998 Output: 80-96 Tn/h (atro) Electrical panel NEW - S7 400 Siemens Inlet cross-section 850x1250 mm Rotor drive 1000 kW Rotor Ø 2000 mm Number of rotor knives ...
1998 | 300044771 | PALLMANN
More information
Ice Cream Machinery. Sawvel Model 81- Quart ice-cream filler 4800 quarts/hour Hygenic standard- 3A Dual lane filling provides volumetric dosing Tooled for double H quart container with plasstic deep skirted lid Paper cups with plastic lids Includes tamper evident m...
2014 | 300044782 | SAWVEL
More information
Mounter proofer. Flexo Plate Mounter designed for sleeves , The air mandrel is located in the center of the machine with direct drive servomotor and gearbox. A pneumatic system provides the lifting of the air mandrel for a fast sleeves change . Working Width: 1300 m...
2021 | 300044888 | TCE
More information
Other Machines. Manufacturer Frimo technology GmbH Modelo/Model High speed Year 2016 Product Infrared-welding machine Emitters no. 24 Operating modes Manual and Auto Tool Holders Left & Right Heating Panel yes Electric system 3 x 440 V AC / N / PE 50/60 Hz Comma...
2016 | 300044964 | FRIMO
More information
Other carton filling machine. Filler Elopak Shikoku 90 UCS Ultra clean filling Capper included Post/Spout Formats: Gable 1lt - 0,75lt Cross section: 70x70 mm Production: 9.000 cph Machine was refurbished in 2024. Is installed and in working condition. Filling juices with 60 d...
2000 | 300044970 | ELOPAK
More information
Bottom weld bags on the roll. 2 Identical bag making machines with auto-rewinder for sale (price per machine) Coreless type Production : apron bag on roll Cutting length : 500-1500mm (max) Cutting width : 100-660mm x 1 (flat bag); max 450mm x 1 (apron bag) Cutting thickness: 0.01...
2020 | 300045003 | PAL PLAS
More information
Cup Fill & Seal machines. Semi-automatic cup fill and seal machine ABL C5 Capacity: 1000 c/h Simple to operate. Can fill up to 250 ml with the same diameter 95 mm. Closing by thermosealed alufoil For filling liquid and semi-liquid products such as milk, yogurt, jam, mayon...
2020 | 300045106 | ABL
More information
Single screw repelletizing line. Conveyor belt including metal detector Length: 4700 mm Max. load: 100 kg Roll feeder dual driven Max. feeding width: 285 mm S-DUG 100 Dosing unit for additives One component dosing unit for additives (eg. masterbatch in form of granules), mounted ...
2017 | 300045137 | NGR
More information
Anilox - cylinders and plates washer. ATEX PNEUMATIC WASHING TANK The machine cleans inkwells and all its solvent ink tools. Internal measurements : 2400mm long x 650mm wide x 500mm high. Service tank capacity : 200liters Washing solvent level min : 120 Liters Washing pump : 1"1/2 Air c...
2018 | 300045172 | IST
More information
Pellet drier. Rotary crystallizer Material unloading system: star valve controlled by inverter to increase or decrease production speed Material loading system managed by 3.5kw pump serving two receivers , one for feeding the machine and one for transporting the ...
2010 | 300045182 | PLASTIC SYSTEMS
More information
Digital printing machines. GENERAL INFORMATION Premium print speed: 9 m/min Premium resolution: 1600 x 1600 dpi Normal print speed: 18 m/min Normal resolution: 1600 x 800 dpi Max print width: 222 mm Color: CMYKK Ink supply: Five 250 mL ink cartridges Ink chemistry: Memjet® aqu...
2015 | 300041735 | COLORDYNE
More information
Stretch film extrusion line. 3 layers stretch extrusion line Extruders 1x 160 mm LD 32, AC motor 315 kw, dosing unit Doteco 4 components (year 2011) 2x 90 mm LD 30 AC motor 110 kw, each one dosing unit Doteco 2 components (year 2011) Trim recycling extruder 105 mm LD 6,...
2000 | 300045280 | PRIMPLAST
More information
Sorting and separating plant. Optical Sorter by PELLENC ST, model: Mistral+ Film DVI 1200 Bought in 2020 but installed in January 2021 Working hours : 120 This machine incorporates software for the detection of PE and PP films. A further software this machine integrates, pro...
2020 | 300045318 | PELLENC
More information
Cup Fill & Seal machines. Waldner cup fill & seal machine, year 1998 For desserts 125g cups Dosomat 7.3 Includes 2 dosers Available immediately...
1998 | 300044814 | WALDNER
More information
Sheeter. Machine completely overhauled in 2019 Bending head mm. 440x440 In-line embosser Possibility to sell optional packaging line (extra price)...
1990 | 300045379 | OMET
More information
Other Machines. RTO The regenerative thermal oxidation plant is used to treat a polluted air stream from printing presses The thermal regenerative oxidiser is capable of oxidising the volatile organic substances contained in the polluted stream from indicated values...
2013 | 300045390 | DONAU CARBON TECHNOLOGIES
More information
4 Colours CI Flexo Printing Machines. Materials: 30 to 80 g/m2 paper Water-based inks Unwinder and single winders. 1000 mm diameter reels Working speed: Max 130 4 slitting blades Closed doctor blades Cylinders available 4x280 mm and 4x400 mm...
2005 | 300045391 | MANZONI
More information
Special welding machines. Conversion machine for woven cement bags Speed : 60 bags/min Sacks Sack width 350-600 mm Sack length 450-910 mm Bottom width of valve sack 80-160 mm Bottom width of open sack 80-180 mm Width of open bottom 180-380 mm Bottom center distance 350-7...
2008 | 300045457 | WINDMÖLLER & HÖLSCHER
More information
Screen changer for extruders. Nordson Standalone continuous melt-filter (for recycling extruder, similar to Laser Filter): can be put additionally to extruder filter at the end as second filter Working hours: < 9600 hours Currently in operation as a 2nd Filter on an ARTEC extrude...
2021 | 300045578 | NORDSON
More information
T-Shirt bags on the roll. Bag making machine for t-shirt and bottom weld bags in rolls coreless (with core possible but never used, it is necessary to re-install the tools) Thickness from 8 to 90 my...
2001 | 300045640 | ROLLOMATIC
More information
Shrink Wrapper for PET bottles. Tray with shrink packer, DIMAC, model: Blue Star, from 2008 Capacity: up to 35 packs/ minute Air consumption: 100 NL/MIN Max. pressure: 6 bar Power: 3 x 415V Product patterns: 200 ml - 4X5 300 ml - 4X3 & 4X5 600 ml - 4X3 1500 ml - 2X3 Available...
2008 | 300045639 | DIMAC
More information
Thermoformer. Quick clamping system for tools Motorised stepless clamping frame adjustment in both axes Motorised stepless window panel adjustment in both axes Forming Area: min: 333 x 400 mm Heaters are equipped with "SPEEDlUM" type radiators. Automatic heating...
2012 | 300045739 | GEISS
More information
Other carton filling machine. Gable top filling machine NIMCO TR370 Construction year 2017 Product: fresh milk, water or juice Cross section: 70x70 mm Machiine is nearly new and mainly used to fill water with trace elements in a test phase Working hours 1050 h Including co...
2017 | 300045754 | NIMCO
More information
Shredder. Output:depending on the material,for foamed materialsapprox 500kg/h Screw crusher with control cabinet Rotor width 1600 Feed opening: approx. 1600mm width X 1600mm length...
2006 | 300045811 | HERBOLD
More information
Bottle inspector. Empty bottle inspector KRONES Linatronic 735 M2 Year of manufacture: 2007 Output: 39,600 bottles per hour Bottle size 0,25l, Longneck 0,33l, 0,5l, Euro 0,5l, 0,75l Gastro Worked hours 17.000 Glideliner, accutable and partly conveyor belts are a...
2007 | 300045866 | KRONES
More information
Cap Applicators. Cap applicator Cap30 Flex, year 2010 Version: 200 Cap: Helicap 23 (1000Slim) Working hours: 22.541h (April 2023) The machine is installed, but out of use. Last production was on 25.10.2022...
2010 | 300045535 | TETRA PAK
More information
Robot. Cartesian robot, TMA midiLine, 2018. Four axes: X, Y, Z, C - X axis travel: 700 mm - Y axis travel: 1200 mm - Z axis travel: 2000 mm - C rotation: 90 degrees Working hours: 30.669...
2018 | 300045985 | TMA AUTOMATION
More information
Coextrusion lines. Coextrusion line ABC for the production of lamination and stretch film Fixed die head, 2 die plates available 400 mm and 440 mm (new) Thickness 20-500 my Screws Diameter.: ø 65 mm x 2, Screw Diameter.: ø100 mm x 1 Gravimetric unit 4 components for ...
2018 | 300045990 | KUNG HSING
More information
Stretch blow moulding machines. Side-TMS 2001-M Year 2003 Cavities: 2 Technical Handbook available Neck 28/400 and Neck 28/410 Volume: from 2lt to 8lt machine is not running but it works properly...
2003 | 300046068 | SIDE
More information
Injection stretch blow moulding machines for PET bottles. Aoki SBIII-250LL-50S from 2003 The # cavities depends on the container body dimensions and fluid capacity. The number of cavities range from 10 cavities down to 1 cavity depending on these parameters. Screw diameter- 54mm Injection capacity- 386 cm...
2003 | 300046097 | AOKI
More information
Robot. For pallet preparation...
2018 | 300046114 | AND & OR
More information
Label flexo printing machines. 10 full UV colors. Dual printing method, each can have flexo or screen printing, not at the same time. Gew UV lamps Chiller for material Rotary Stamping Delam Relam 4 die cutting stations (middle, and 3 at end of machine) Cylinders 3x 122 5x 12...
2004 | 300046151 | MPS
More information
Extrusion Blow Moulding machines up to 10L. Coex-3 Techne for bottles between 750 ml and 2000 ml Twin station, 5-exit head View stripe 3 extruders diameter 80/100/70 mm L/D: 25 Mould platen sizes 900x520 mm Opening stroke 250mm Clamping force 260 kN Deflashing Wall thickness control Ave...
2003 | 300046240 | TECHNE
More information
Extrusion line for drip irrigation. Flat drip extrusion line Material: PE Main extruder: KRAUSS MAFFEI KME 60-36 (working hours: 6 590, August 2023) Second extruder: WINDSOR LX-25 (2014) Control system: T.H.E. MACHINES (2013) Gravimetric system: WERNER KOCH MCma - 4T (2013) Feeder: ...
2011 | 300046252 | THE MACHINES
More information
Other Machines. Horizontal wrapping machine with extended sealing time and 4-axis electronic control including Videojet printer The machine can work with paper, PE, PBAT or starch based film reels. Speed Up to 60 pck/min Product Width From 20 mm to 380 mm Produ...
2019 | 300046326 | IMANPACK
More information
Other Machines. 1/ CDI Spark 2530 with Optics 10. (Grapholas motor control, LEN or TIFF input format), year 2020 External drum design Plate format: 25 "x32" (635mm x 762mm) High power fiber laser Class 1 laser device Raster lineatures : up to 200 lpi, depending on e...
2020 | 300046336 | ESKO
More information
Labelling machine for glass bottles. Used labeller for self-adhesive laber for glass bottles Brand: KOSME Year 2006 Clockwise rotary 4 plates 2 Head with auto-adhesive label 7 bottle formats Manuals Machine stored in the warehouse and available immediately! ...
2006 | 300046418 | KOSME
More information
PET labelling machine. Used PET bottle labeller Brand: Kosme (made in Italy) Model: TOP II HM 16/720 SH1 E1 Year: 2012 Production: 20.000 bph Machine disconnected and available immediately! ...
2012 | 300046419 | KOSME
More information
Coffee Packaging Machine. Rovema SBS 250 Twin Tube, year 2009 Product: Coffee Filling weight: 1. - 227 grs (8 oz) 2. - 397 grs (14 oz) 3. - 454 grs (16 0z) 1. - 757 ccm 2. - 1324 ccm 3. - 1514 ccm 4. - 3242 ccm Note: The volumes listed above are estimated. Actual ...
2009 | 300046290 | ROVEMA
More information
Screen changer for extruders. 2x Screen changer Maag FSC-160 for sale (price per unit): Functional, in good condition last time used with EUP600-EWT350 Hydraulic unit for the screen changer included (maintenance recommended) Accessories: (Not included in the offer, ask for the p...
2009 | 300046473 | MAAG
More information
8 Colours CI Flexo Printing Machines. Max. mechanical speed 400 mt/min Unwind / Rewind type Turret Max. Unwind/Rewind reel diameter 1000 mm Number and sizes airshafts for winders 2 size (76-2pcs, 152-2pcs) Video camera 2x BST Corona treater Ink pumps 8 pcs In 2013 the electronic of the...
2001 | 300046479 | SCHIAVI
More information
Stretch blow moulding machines. Used stretch blow molding machine for big bottles Brand: SMI Model: SR 4 HC Year: 2006 Production rate: 29/21 3.900 bph 48 2.900 bph Mold available after a negotiation formats 1lt and 5lt Neck formats: 48mm and 29/21 (at extra price) Working...
2006 | 300046424 | SMI
More information
Injection molding machine up to 250 T . IMM OTTOGALLI Bicolor EPS2 for shoe soles clamping force: 130 ton distance between tie-bars H/V: 400mm Tie-bar diameter: 30mm Platen size (H x V): 360mm Mould height (max-min): 140-90mm daylight between plates 60mm clamping speed: 80 mm/s opening str...
1999 | 300046507 | OTTOGALLI
More information
Other Machines. 5-axes CNC- Controlled Tool Grinding Machine Description: suitable for regrinding and new production of wood, some plasctic and metalworking tools of all kinds. Specifications: Axes: X: 500 mm , Longitudinal slide, recirculating ball screw or line...
2017 | 300046537 | SCHNEEBERGER
More information
Injection molding machine up to 250 T . OTTOGALLI EPS1 6 stations monocolor for shoe soles Materials: PVC, TR, Ronil final product: monocolor shoe soles CE certified: NO Machine manuals available Robot: YES...
2000 | 300046610 | OTTOGALLI
More information
Coextrusion lines. 5 layers extrusion line Extruders 4x 60mm / 30D / 45 kW grooved feed barrier screw extruder 1x 90mm / 30 D / 110 kW grooved feed barrier screw extruder 20 (1+3 for each extruder) component Material conveying, gravimetric blending & GSM control...
2017 | 300046630 | RAJOO
More information
Injection molding machine up to 250 T . Available February 2025...
2012 | 300046623 | KRAUSS MAFFEI
More information
Injection moulding machine for PET preforms. Husky Hypet 90 RS65/65 for PET preforms from 2010 Mold Dehumidifier: Not Available Color Dosing Unit: Not Available Dryer: Not Available Conveyor: Available the one under the Robot Not currently in production, available immediately and in excell...
2010 | 300046640 | HUSKY
More information
Laminators. Laminator with solvent and solventless trolleys Material width 700-1430 mm Corona treatment on primary unwinder Materials that can be coated Alu 9-40 my (15-40 for SL) Bopp 15-80 my Calendered paper 40-300 g/m2 (SL only) LDPE, LLDPE 60-200 my (40-2...
1998 | 300046668 | NORDMECCANICA
More information
Other Machines. Barmag Two-For-One Twister DD2000GTE for high speed twisting of artifical monofilament grass yarn of 6 times 1800 dtex, for 8 times 1100 dtex - speed with 33 turns per meter up to 190 m/min depending on denier and yarn quality - Without slippage even...
2010 | 300046675 | BARMAG
More information
Complete PET filling line for still water. COMPLETE PET STILL FILLING LINE KRONES FILLER VOLUMATIC and CAPPER - 2008 CONTIFORM S24 BLOW MOULDER -2008 CANAMATIC LABELER CHECKMAT CHECKMAT (LABELER) DOUGLAS CASE PACKER LANFRANCHI Bottle Unscrambler Videojet Bottle Coder Ozone Generator PAI...
2007 | 300046676 | KRONES
More information
Other Machines. GSE B.V UV ink dispenser 14 ink tanks for 20 kg of ink 1 ink tank for 40 kg of ink Manual in English is available Label printer has a defect and needs to be replaced....
2010 | 300046714 | GSE
More information
Single screw repelletizing line. Complete line PET recycling line for food grade. Only 300 working hours. BB-ES Big Bag emptying station for big bags of the size 1000 mm x 2500 mm Brand Eisbar CR-DR1200 Crystallizer and dryer for PET Flakes GDS 1200 mm; Brand Eisbar,Output 1200 kg/...
2022 | 300046730 | NGR
More information
Complete PET filling line for still water. Complete PET still water filling line KRONES C320 BLOW MOLDER 2013 LINKER FILLER 60-72-20 from 2011 Inludes: -Airveyor 101 -Case Coder -Inspet -Ink Jet New -Krones Canmatic labeler -Ozone -Pai Palletizer -Posimat -Preform Dumper Preform Orientator...
2013 | 300046707 | KRONES, LINKER
More information
Filler for pouches. Doypack Packaging Machine Bossar from 2011. Capacity 60 units per minute Can work with confection of flakes, granolas, muesli, legumes-peas, beans, rice, groats Min format (mm): 100x100 Max format (mm): 260x300 Thermofoil Dimensions of the mach...
2011 | 300046751 | BOSSAR
More information
Injection molding machine from 1000 T. ...
2015 | 300046739 | NPM
More information
Cast coextrusion lines. 350 m/min line speed - last running output 850 kg/h taken by owner Dosing system: INOEX Type: SAVEOMAT IGS Extruder A,B,C: 3 Component Each Extruder D,E: 4 Component Each Screws Diam and L/D: Ext A -105.30D, Ext B-90.30D, Ext C, D& E -70.30D Screen C...
2013 | 300046773 | WINDMÖLLER & HÖLSCHER
More information
Thermoformer. Automatic window frames adjustment IR radiant heater installed Automatic Sheet loader 1 Window frame included: Min under mold size: 455x608mm Max under mold size: 1455x1143mm...
2001 | 300046790 | GEISS
More information
Cup printing machines. Max. printing height: 150 mm Max. printing length: 400 mm Min./max. taper: 0 – 15° Max. speed: 400 cups/min....
2008 | 300046823 | VAN DAM
More information
Printing machines for food and beverages caps. Tampoprint Rotoprint rotary pad printing on bottle caps 38mm dia x 16mm tall Tamper evident speed 1500 caps per minute 3 colors Running clockwise Year 2021 with only 19 hours running time CE Certification ...
2021 | 300046837 | TAMPOPRINT
More information
Injection molding machine from 250 T up to 500 T . HAITIAN MA 3800 III Plastic Injection Molding Machine ( barely used / almost new ) Manufacturer : HAITIAN Year of manufacture : March 2021 PUMP MOTOR POWER : 55kW HEATER POWER : 33 kW HOPPER CAPACITY : 50 KG AVAILABLE: 2 machines for sale...
2021 | 300046873 | HAITIAN
More information
Thermoformer. Forming - Cutting - Stacking Forming machine : Forming area min-max : 300x100 - 500x350mm Part height above/below material level: 100/30mm Material width min-max: 340-540mm Installed power upper heating: 9.8 kW Installed power lower heating: 5.6 kW ...
1991 | 300046877 | ILLIG
More information
Extrusion lines for coating. The standard machine comprises the following components: Extruder Automatic filter Wide-slit die Volumetric metering unit with feed station Crane system Double unwinder with web guide Coating unit: Chiller roll - with cooling water circulating s...
2012 | 300046913 | STARLINGER
More information
Other Machines. Housing protection type : IP53 dust proof control box Ambient temperature : 5-45 C Operating temperature range : 40-195 C Over temperature off switch : *Hardware : Thermostat *Software : adjustable max 230C Piston pump : 14:1 Op pressure : 0.5-4.5 b...
2018 | 300046908 | MELTWOOD
More information
Special welding machines. Valve bag welding machine Format ranges: Double-flat bag width (dfl): 351-600 mm Bag length: 450-910 mm Bottom width ( > 160 mm - only for bags open on one side): 80-180 mm Bottom centre distance: 350-750 mm Length of tube sections ( > 1,090 mm - onl...
2013 | 300046906 | STARLINGER
More information
Label flexo printing machines. 9-UV + 1-HotAir 9-color standard press excluding any drying The equipment has 200 machine hours. Film-only and shrink-wrapping, it can also print wrap-around labels for soft drinks. No die-cutting stations. Transformer not Included No sleeves include...
2022 | 300046979 | NILPETER
More information
Injection molding machine from 1000 T. Working hours 28084 (May 2024)...
2016 | 300047027 | PLASTIC METAL
More information
Other Machines. Complete line for the production of solar panels. Capacity: up to 20 MW Stringer: 600 cells/h (refurbished) Automated cell loading and ribbon placement Automated layup in boxes Manual foil cutter Two rolls for EVA and backsheet Fully automated Lay...
2021 | 300045514 | JVG TECHNOLOGY GMBH
More information
Shrink Wrapper for PET bottles. Sidel tray shrink packer- year 2018 Model: EvoFilmEVF-5M-F-SDR Only 6.300 hours Stored in a warehouse and available immediately Guarantee available upon request ...
2018 | 300047110 | SIDEL
More information
Air bubble film extrusion line. Processed Materials: LDPE, LLDPE Thickness range (Min to Max.): 50 GSM to 700 GSM M/c Speed: 12 to 20 mtr per min (depend on GSM and microns) Number of extruders: 3 extruders Number of Layers: 5-layer machine with 2 unwinder system Dosing system (Typ...
2012 | 300047105 | ALPHA MARATHON
More information
Extrusion lines for nonwovens. The line is designed to produce high-end products including the mask core sheets that meet the requirements of N95/N99, FFP2/FFP3 level, and materials for battery diaphragm, high-efficiency filtration, medical and health care, degradable, TPU other h...
2022 | 300047127 | REICOFIL
More information
Cup Fill & Seal machines. SERAC bucket filling machine model 2229 Twin P.N, from 2011 Capable to fill buckets up to 10 kg - 1kg (800 bucket/hr) - 4kg (450 bucket/hr) - 10kg (250 bucket/hr) Product line,semi automatic filler & sealer m/c, conveyors, date coder. ...
2011 | 300047131 | SERAC
More information
Injection stretch blow moulding machines for PET bottles. NISSEI ASB stretch blow molding machine Model : PB170/170 - 32/8 MII Year – 2009 For PET bottles production inclusive of : -Preform gate cutter PMG-32 -Rubber leveling pad Including moulds, compressor & cooling tower - 3 Moulds - 210 ml , 250 m...
2009 | 300047228 | NISSEI ASB
More information
Paper bag making machines. Paper width: 320 - 930 mm Cutting length: 270 - 510 mm Bag width: 100 - 280 mm Paper bag length: 225 - 470 mm (2.5 - 470 mm) Bag bottom width: 60 - 160 mm Paper weight: 60 - 160 g/m2 Maximum paper roll diameter: 1500 mm Inner diameter of roll core: 7...
2019 | 300047268 | WENZHOU
More information
Other Machines. Flexographic Plate Exposing Equipment with LED Technology Thickness: 0.030" to 0.155" / 0.76 to 3.94 mm. Plate Size: 48" x 35" / 1200 mm x 900 mm (or smaller). All digital photopolymer plates. ...
2018 | 300047291 | ESKO
More information
Label sheeter - cross cutting. Cutting and rewinding machine Reel width: 340 mm Unwinder reel diameter: 762 mm Rewinder reel diameter: 610 mm Core diameters: 25,40,50,76 mm Speed: up to 200 meter per minute Web guide Disc knifes....
2002 | 300047297 | ROTOFLEX
More information
Mono extrusion lines. Film width 400-900mm Screw length 1650mm Die head diam. 380mm Film thickness: 14-300 mic. Winder + rewinder, Maguire dosing unit (2014), Metre counter, Automatic film cut-off, control cabinet, Corona Sleeve, half-sleeve...
2019 | 300047295 | VENUS
More information
Extrusion lines for coating. Extrusion lamination line usefull width 2200 mm Coating/lamination units Coating/lamination unit 1 description: Rotogravure coating unit: -2 drying hoods 2,5m length -drying with 2 x oil heaters -Each hood with dedicated heater and blower Coating/lam...
2005 | 300047302 | HAN YOUNG
More information
CNC machining centers. 3-AXIS MACHINING CENTRE EVO3618-800 SERIES The proposed Machining Centre originates from the EVO Series and is a 3-axis milling machine on the Numerical Control tool, with Cartesian structure with mobile gantry configured as follows Cartesian axis st...
2021 | 300047312 | SYSTEM ROBOT AUTOMAZIONE SRL
More information
Complete PET filling line for still water. Krones PET filling line for water Year: 2015 Very few hours, was never used Neck: 30/25 Includes: Krones blow moluding machine Krones Contiform filler Krones labeller Krones packer Krones palletiser Available immediately...
2015 | 300047313 | KRONES
More information
Stretch film extrusion line. 5 layers stretch extrusion line 4 extruders 2 x 75 mm; L/D 1:30 1 x 180 mm; L/D 1:32 1 x 65 mm, L/D 1:30 Layer configuration: A / B / C / B / D Film thickness: 14-35 my Output: 900 kg/h for 23 my film Primary chill roll: 1500 mm Secondary chill roll:...
2011 | 300047324 | DOLCI
More information
Cup Fill & Seal machines. Fully automatic cup/bucket filling and sealing machine GRUNWALD-ROTARY 12.000E/1-/2-lane Construction year 2020 Capacity : cups - 2000 - 2400 cups / h buckets - 100 - 400 u/ h depending on size - 3 format sets (year 2019) - Ink-je...
2020 | 300047372 | GRUNWALD
More information
Bottom weld flat bag making machine. Welding machine for loose or block notes bottom weld bags with or without punched handle...
2005 | 300047414 | ELBA
More information
Twin-screw extruder for PE/PP compounds. Twin-screw extruder LEISTRITZ ZSE 27MAXX-48D Year: 2013 includes: Control panel Switch and control cabinet Cylinder Screw set: 2 screws Temperature control Vacuum pump Busch Mink MM1144BV year of construction: 2013 Temperature control unit E.Braun...
2013 | 300045753 | LEISTRITZ
More information
Corona treatment. Electrode width 2500mm Discharge Ceramics-Roller Drive type Powered Discharge Roller Water-cooled Pretreatment Direction Controllable by web direction Nip-Roller Available on both sides Electrode spacing adjustment...
2019 | 300047405 | AFS
More information
Side weld bag making machine. Materials: PE/PP/BOPP/HDPE Capacity 280 cycles/min Min. / max. film width: 750mm/750mm Min / max film thickness: 0.010mm - 0.080mm HDPE 0,015mm-120mm LDPE 0,020mm-0,075mm PP Maximum roll diameter: 800mm Min / max bag width: 45mm/750mm Unwind...
2007 | 300047439 | MAMATA
More information
Thermoformer. Minimum forming area: 241mm x 190mm (9.5“ x 7.5“) minimum Sheet Width : 533mm (21“) maximum - 292mm (11.5“) minimum Thickness range: 0.25mm - 1.50mm (0.010“- 0.060“) Knife Length : 3330mm (131“) for APET 5000mm (197“) for other thermoform. materi...
2009 | 300042704 | GN
More information
Extrusion Blow Moulding machines up to 2 L . Deflashing unit NO leak tester...
1999 | 300047455 | PLASTIBLOW
More information
Drawtape bag making machine. Heavy duty automatic draw string garbage bag and bottom sealing bag making machine with overlap and perforation on roll but Bag width. 450 -1000 MM/MAX. Thickness of film LD/LLDPE - 0.02-0.05MM (one layer) HDPE – 0.015-0.05MM (one layer). Draw str...
2017 | 300047508 | HEMINGSTONE
More information
Other carton filling machine. Gable top carton filling machine GALDI RG250 UCS, year 2004 With screw cap applicator by ultrasonic heat Peroxide cleaning Cross section: 70x70 mm, package style-B Volume: 250ml, 500ml and 1000 ml Shelf life depends on the milk quality. Minimum...
2004 | 300047534 | GALDI
More information
Coextrusion lines. Extrusion line 3 layers Diam Extruders: 65/80/65 mm Gravimetrics CONTREX M+S + M+S + M+S Head with 350 mm die,IBC, gap 1.7 and 2.2 mm Cooling ring Rotating haul off Thicknesses 25-140 my CONTREX thickness control MARTIGNONI Corona Treatment Micrope...
2000 | 300047536 | BIELLONI
More information
Injection molding machine up to 250 T . ...
2015 | 300047624 | BMB
More information
Extrusion line for tapes (woven sacs). The tape stretching line is developed for processing high quality PP tapes. Operating speed up to 420 m/min Die width up to 930mm, Die lip aperture 0.1-1mm Vacuum feeder and elliptic Dosing Unit volutec 1+2 components smartTRONIC processor control fo...
2018 | 300047628 | STARLINGER
More information
Rotogravure printing machines. Min web width: 600 mm Materials: PET, PP, OPP, TWIST PET ELS Reversible units: 8 and 9 Drying extended units: 1 and 9 Auto Viscosity control Colour registration control: Eltromat Video camera: BST Web guide in unwinder and in turn bar Drying with ...
2016 | 300047752 | KOHLI
More information
Air Compressors (High Pressure). Ingersoll Rand compressor Year of construction 2015 Model Centac 750 Sill installed and available immediately!...
2015 | 300047818 | INGERSOLLRAND
More information
Chiller. ...
2021 | 300047822 | EUROCHILLER
More information
8 Colours CI Flexo Printing Machines. Mechanical speed 250 mt/min Duplex rewinder, automatic, ‘DATAC-80’ type Unwinding reels 800 mm diameter Single-axis unwinder, type ‘SHD-130’: unwind reel diameter 1200 mm Water-based inks Antistatic bar unit at print input Tension range Min 50 N -Max...
2013 | 300047840 | EXPERT
More information
Agglomerator. PFV 400 system without hot melt granulator Agglomerator Paddle Speed: Approx. 562 rpm ·Working Diameter of the Die (Inside): 400 mm ·Working Width: 40 mm ·Number of Pressure Blocks: 2 Mixing Unit : ·Drive: Front gear motor (SEW) ·Mixing Speed: 5 r...
2013 | 300047861 | PALLMANN
More information
Washing plant. Complete hot washing line composed by 300 MT Conveyor systems - Benli Ballistic Separator – IMT Magnetic Separator – Benli Eddy Current Separator – Benli Disk Separator - Benli HERBOLD Washing Line; 1 Herbold Debaler EWS 45/160 BA 1 Herbold La bel...
2022 | 300047894 | HERBOLD
More information
Chiller. ...
2017 | 300046598 | DAIKIN
More information
EPS Cutting Line. Sloping Roof (GFD) Cutting Line StyroDesign-HS-DALI including Palletizing Robot ABB and Orbital Winder StyroDesign® HS Special function for roof riders Stationary wire frame Block stop with angle measuring tool Marking station with inkjet printer...
2020 | 300047907 | VIRO
More information
Pallet wrapper. Used Pallet Wrapper Robopac Genesis Cube Production: 118 pallets per hour Machine dismantled ...
2016 | 300047925 | ROBOPAC
More information
Carton erecting machine. Carton erecting machine SIAT F345-DX from 2018 Average production 12-14-16 per minute Carton box dimensions: length 220-560, width 150-350 and height 220-450 DX - right hand machine Can be shown with material Available immediately!...
2018 | 300047928 | SIAT
More information
Injection molding machine up to 250 T . The machine has very low working hours and was initially procured for a project that was later discontinued. Dental Products Used Materials = PP & EVA...
2020 | 300047931 | MULTIPLAS
More information
Laminators. Duplex laminating machine for the production of solvent-free adhesive-based and water-based laminates. Maximum material width: 1620 mm World Mixer Mixer Rotogravure unit for lamination with solvents Ferrarini & Benelli corona treatment Automatic dou...
2013 | 300047987 | NORDMECCANICA
More information
Single screw repelletizing line. Intarema 1007 TVEplus eco save with hydraulic filter Line in production, in very good conditions, well maintained once per week. Screw and barrel regularly measured, completely exchanged in 2024. This machine with current filtering system is now ...
2015 | 300047997 | EREMA
More information
Label sheeter - cross cutting. Forming and welding heat shrinkable sleeves machine BASE Width: 300 mm Diameter: 600 mm Speed: 500 m/min Single braked unwinder DCM belt guidance Anti-static ropes Adjustable skis from 50 to 300 mm 1 solvent deposit per needle Speed-controlled cutti...
2015 | 300047994 | DCM
More information
Label Rewinder. Label finishing machine with hot foil and embossing options Plates format: 200x200 mm Unwinding unit: SM 350 Maximum material width: 205 mm Paper roll size: 2 km Processing unit: HS 202 HF (hot foil and an embossing sections) Maximum print area: 1...
2012 | 300048001 | CARTES
More information
Bi-Injection moulding machine. Interfaces hot runner regulation Yes number of heating zone for hot runner 16 number of hydraulic cores moving side 4 robots interface Yes GID-interface No...
2004 | 300048012 | DEMAG
More information
8 Colours CI Flexo Printing Machines. Available from November 16, 2025. Materials : Aluminium/paper: from 50 to 100 g/m2 Aluminum/paper/aluminum: max 100g/m2 PET/PE: 12 to 80 microns OPP: 20 to 100 microns Cellophane: approx. 30 g/m2 Coated paper: max 130 g/m2 Metallized paper: max 130 ...
2002 | 300048038 | ROTOMEC
More information
Shredder. Shredder for Solid Secondary Fuel (SSF) industrial origin Type: single rotor Knives: no. 70 - 80x80 mm Motor type: Hi Torc 247 kW Rotor cooling system Screen: 30 mm Output:8000 kg/h Hopper: Included Accessories: Electrical cabinet and chil...
2010 | 300048042 | VECOPLAN
More information
Stretch blow moulding machines. Used blow molding machine Brand: Sig Blomax Corpoplast (KHS) Model: Blomax 16 Year: 2004 Working Hours:294.568 ( 20/01/2025) Neck PCO 1881 Working till March 2025...
2004 | 300048081 | KHS
More information
Cast coextrusion lines. Raw material for the production of CPP, metallized grade, laminated grade, twist and printed grade LDPE for the production of PE without production guarantee: PP homo- PP copo. Type of structure in coextrusion: CBBAA - CBABC Diameter of the shafts: 6...
2007 | 300048126 | COLINES
More information
Shredder. Material: Intermediate bulk containers and 200 ltr drums Material size: In accordance to the dimensions of the cutting chamber Material characteristics: Free of foreign objects Material feed: Manually Desired chip size: 40 mm Infeed hopper ope...
2024 | 300048129 | WEIMA
More information
Other Machines. Lead-Acid Battery Recycling Plant is designed for the dismantling, separation, and desulfurization of spent lead-acid batteries. The facility also includes a Rotary Tilting Furnace for metallic lead melting and lead bullion production. Fully automate...
2017 | 300048134 | STC
More information
Stretch film extrusion line. Line for automatic and manual stretch film 4 extruders : Extruder A : 65 Ø; 100kw motor Extruder B : 160 Ø; 400kw motor Extruder C : 75 Ø, 150kw motor Extruder D : 75 Ø; 150kw motor Refeed extruder : 120 Ø; 70kw motor Die : Flat die type Cloeren Fe...
2011 | 300041726 | DOLCI
More information
Thermoformer. 2 station VFK-1000 pressure and vacuumformer + cutting station line Only 6.000 working hours 15 cycles/min Max Sheet width: 1040mm Upper and lower heaters Skeletal Grinder Stacking Unit...
2006 | 300048172 | VFK
More information
Label flexo printing machines. Flexo Printing Machine Zonten LRY-650 Materials: BOPP 18-100micron PET 18-80micron PE 40-100 micron Paper 30-250gr/m2 Foil lids 30 -70 micron - Material width: 685mm - Turning bar 450mm - Printing possibilities: 1-5 / 2-4 / 3-3 - Web guide - L...
2014 | 300040253 | ZONTEN
More information
Monobloc rinser filler capper. Used monobloc for still water with labeller Brand: Vipoll Model: Visitron VKR-EIDN 32/32/6 S Neck: 28mm Sport Cap Format: 0,33l and 2l bottle square shape It includes the labeller Gernep Roll-Fed 12-640 1RA it includes the conveyors Production:...
2011 | 300048195 | VIPOLL
More information
Injection moulding moulds. Available 400 moulds for: ORGANIZERS TOOL BOXES MULTISTOOL WORKCARTS UTILITY CABINETS MULTIDESK PROMOTIONS DISPLAY BOX TECHNICAL DATA ACCESSORIES Can be sold separately - Further info upon request...
| 300048222 | HOME MADE
More information
Injection molding machine from 250 T up to 500 T . Machine got 4615400 cycle worked...
2016 | 300048228 | NEGRI BOSSI
More information
Other Machines. JUPITER: The automatic defect detection system “PRINTVISION JUPITER” is a printing process control system. It is designed to automatically detect, by means of a high resolution matrix camera, the defects of the printing process in wide web and high s...
2021 | 300048266 | AVT
More information
Injection molding machine from 500 T up to 1000 T. ...
2015 | 300048296 | TEDERIC
More information
Other Machines. Cutting length 4300 mm Cutting disc exit aprox 122 mm (for disc Diameter 400 mm) Rpm disc 4300 min/-1 Diameter main disc max. 400 mm...
2018 | 300048295 | MACMAZZA
More information
Injection molding machine up to 250 T . Includes: Robot IML and device for labels IML Robotics Cartesiano 700 - 3 axes - year 2013 Available for sale (Price on request): - IMM TOYO Si-350 V JH750C year 2012 + Robot and storage-dispenser labels IML ROBOTICS year 2012 - IIMM FERROMAT...
2007 | 300048303 | FERROMATIK MILACRON
More information
Other Machines. Configuration of the machine : Pouch infeed Pouch positioning correction Corner cutting Spout inserting Sealing station Sealing station Cooling station Camera Pouch discharge Pouch dimensions : Width min max : 60-280mm Length min-max : 120-450mm C...
2011 | 300048326 | THOM
More information
Single screw repelletizing line. Machine is stored since 2021 since bought bigger machine but can connect and show machine running when serious interest. Operating hours 22,150 hours Tested on 3 and 4 March 2016 at NGR. The output of the system depends on the material properties s...
2016 | 300048353 | NGR
More information
Offset printing machines. Intermittent Label Offset Printing Machine Machine ran very little, sell because they go 100% to digital ZX-450 Intermittent Label Offset Printing Machine : Shaftless Fully Servo Driven by Rexroth Unwinder with BST web-guide 1 flexo unit 5 colors o...
2019 | 300048370 | WEI GANG
More information
Selection and calibration units. Unitec Unical 200 Cherry electronic grading machine, year 2018 Average production capacity: 0.8 tonnes/hour With Vision System Cherry Vision 3 for sorting and packing cherry tomatoes Sorting parameters: size, colour, external quality, shape defec...
2018 | 300048397 | UNITEC
More information
Extrusion line for corrugated pipes. NO TOOLING Master extruder Manufacturer: Cincinnati Extrusion GMBH Type: PROTON 60/30G Year: 2001 Working hours: 116.470 Note: complete with gravimetric output control and N° 1 dosing feeder Plasticolor 2200. Slave extruder Manufacturer: Cincinnati...
2001 | 300048417 | UNICOR
More information
8 Colours CI Flexo Printing Machines. Printing capability: 8 + 0 Printing speed: 350 mpm Speedy Clean automatic washing system FNC3000-R control system Automatic duplex unwinder and rewinder for 1000 mm diameter reels and electric lift for reel loading/unloading Camera with Avt/Pv Jupite...
2006 | 300048415 | FLEXOTECNICA
More information
Digital printing machines. Print Method - Dry Toner Electrophotography CMYK [Full Color] Printing Resolution - 1200dpi(3600dpi equivalent) x 1200dpi/8bit Material Width - 330mm Printing Length - 480mm & 1195mm at banner mode Material Thickness - 60 to 250micron Printing Spe...
2017 | 300048423 | KONICA MINOLTA
More information
Bottom weld flat bag making machine. Folding unit 2 unwinders...
2002 | 300048442 | BASFF
More information
Label flexo printing machines. Package of 2 machines : Machine 1 : Manufacturer: Gallus (Arsoma) Model: EM 280 Printing Width: 280mm Year: 1997 7 Flexo Units 7 Hot Air Drying Stations 1 UV Station (UV Varnishing) 2 Rotary Die Cutting Stations Video-Scanner ERGECA included Condit...
1997 | 300048444 | ARSOMA
More information
Teabag Packaging Machine . Teabag packing machine Tecnomeccanica from 2013 - packing in two-chamber sachets with a hang tag - possibility to pack 20 sachets in an envelope - cardboard box - capacity at the moment 350 sachets per minute - machine serviced, in good technical co...
2013 | 300048234 | TECNOMECCANICA
More information
Thermoformer. Working hours 56714 Max. sheet width 630mm Cycles/minute: 30 Stations: Forming cutting Stacking Servo PLC: Siemens Electrical power requirements; 125 A Electrical Usage:10 kA...
2003 | 300048447 | ILLIG
More information
Baling press. Plastic crusher compactor 1500kg/h Installed power on spiral compactor shaft 1 : 37 kW Installed power cutter : 5.5 kW Installed power extractor auger : 2.2 kW Installed fan power : 30 kW Installed power of 1 x 1.5 kW : hydraulic power unit Installed...
2024 | 300048495 | DOMENECH MACHINERY & SYSTEMS
More information
Single screw repelletizing line. For film and rigid ldpe/hdpe/pp, washed, dried and ground Screen diameter 12-14 mm, printing max. 70%, humidity max. 6% Output: 400/550 kg Everything is included except the silo (to be sold separately) 2 degassing Manual screen changer. No metal dete...
2006 | 300048533 | TECNOVA
More information
Other Machines. Embosser useful width 1600 mm Materials Film : 30/120 micron Paper : 40/120 grams Max working speed:50 Mt/min Tension : Min 4 Max 25 Kg Max reels diameter in unwinding and winding : 800 mm Heating cylinders:Diathermic oil Cylinder cooling:Water Ma...
2022 | 300048559 |
More information
Robot. No. 1 Wittmann industrial robot model W 821 (3 interpolated electric axes) Drive strokes X-axis, extension stroke mm 550 electric with brushless motor Y-axis, vertical stroke mm 1,400...
2017 | 300048574 | WITTMANN
More information
Other Dairy Machine Type. Storage tank in aseptic atmosphere for juices Capacity: 100 000 liters AISI 304 inox 10 tanks available (the price is for each one) Available immediately....
2017 | 300048124 | FARCK
More information
Extrusion lines for coating. Extrusion lamination line - Roller Width: 1400mm - Valid Coating Width: 600- 1300mm - Max. Unwing Diameter: 1200mm - Max. Rewind Diameter: 1200mm - Core Diameter: 3"/6" - Substrate Material: + Roll Paper: 30-60g/m2 + PET Film: 12u + BOPP: 20u + MPET:...
2017 | 300048560 | JIANGSU LAIYI
More information
Twin-screw extruder for PVC compounds. Jwell SJZ92/188 Capacity: 600-800 kg/h Works from right to left 380V, 3P, 50HZ Controlled by AC frequency converter ABB Vacuum exhaust system: 1 vacuum pump with water circuit (1 set) Vacuum pump motor: 5.5 kW, 5.5 kW three-phase asynchronous motor,...
2021 | 300048581 | JWELL
More information
Paper bag making machines. Speed 120 mt / minute mechanic speed 150 pieces / minute maximum Cutting lenght 360 - 770 MM Bag width 180 -460 MM Gusset 80 -230 mm Paper thickness 70 gsm - 120 gsm Paper reel max width 1.350 mm Paper reel max diam. 1.250 mm Shafts 76 mm...
2022 | 300048607 | SOMTAS
More information
Complete PET filling line for still water. Products: still water Bottle type (basic): from 0.5 l to 1.5 l volume (due the specifications of the filler the maximum format is 1.5lt) PET closing type: 30/25 Labels: Plastic Roll Fed Package format: 3x2, wrapped in heat shrink film Tray: Euro...
2010 | 300048621 | SACMI FILLING
More information
Thermoformer. Full set of Illig RDM 70k (3g) line. Rol stand + preheater + RDM 70k(3g) + PH Illig stacker + grinder with blower Material Roll Stand, Type ROK 800 Material roll stand for material rolls up to 1200 mm diameter; Material width max. 805 mm 1 set of cl...
2011 | 300048623 | ILLIG
More information
Mono extrusion lines. Plastcontrol dosing unit Die head with IBC Corona Treatment Web guide...
2008 | 300048636 | ALPINE
More information
Single-shaft film slitter-rewinders. Rewinder for stretch film Thickness : 5-25 Micron Rewind type 3” shaftless winder stations...
2014 | 300048643 | CLASS ENGINEERING
More information
Mono extrusion lines. Material thickness 9-150 my Dosing system: Contrex Fixed die head Die diameter: 180 mm Motorized calibration basket Rotating haul off Gusseting unit Corona Web guide Rewinder: max. dia. 800 mm Available for pick-up October 2025...
2004 | 300048644 | TECOM
More information
T-Shirt flat bag making machine. Processed material: LDPE; HDPE Film thickness: 8-200 my Bag types: T-shirt; with or without block note and patch handle Bag width min: 200 mm Bag width max: 1050 mm Side gusseting up to 100 mm Mother roll diameter: 800 mm Double sealing bar Longitudi...
1999 | 300044020 | SALDOFLEX
More information
T-Shirt flat bag making machine. Processed material: LDPE; HDPE Film thickness: 6-100 my Bag types: T-shirt; with or without block note and patch handle Bag width max: 1050 mm Side gusseting up to 100 mm Mother roll diameter: 800 mm Double sealing bar Longitudinal sealer Single unw...
2002 | 300044021 | MOBERT
More information
Bottom weld bags on the roll. Bag type: garbage bags side seal/bottom seal Mother roll width: 1100 mm Mother roll diameter: 800 mm Bag width: up to 1100 mm Thickness from 8 to 50 my Photoelectric cell control Taping unit PLC: Siemens Available for pick-up October 2025...
2007 | 300048640 | MOBERT
More information
Coextrusion lines. Coextrusion line 3 layers Doteco grado gravimetric units 4components per each extruder Extruders 55-80-55 mm Die head 300 mm with IBC Cason corona treatment Kundig thickness control system Rotating haul off Tower Thickness 13-200 my...
2011 | 300048680 | CMG
More information
Grinder - Granulator. Included: -big bag/pallet/material emptying system, -first conveyor belt, -shredder and big bag loading system...
2018 | 300048688 | HERBOLD
More information
Pulverizer. Mostly pulverized LDPE 20 MFR, achieved a capacity of about 350kg/h. Pneumatic transport system- MFT 35/450 from 2016...
2016 | 300048696 | HERBOLD
More information
Injection moulding machine for PET preforms. Used injection machine for PET Preforms. Brand: BMB (Made in Italy) Model: KW280 PET/3450 SP the system include the follow auxialiaries: Dryer: SMC MODOTECH MWD350 year 2009 Mold Dehumidifier: Piovan RPA 800 year 2005 Filter: BDOX2-6 100/120 Hopp...
2020 | 300048713 | BMB
More information
Sheet coextrusion lines. Line to produce multilayer rigid film up to 7 layers Materials are PET (flakes and virgin), EVOH, TIE Layer. Material transport pumps, year 2008 Extruder A: single screw dia. 100mm 570kg/h with PET flakes, MAAG melt pump and MAAG screen changer, Mc...
2003 | 300048737 | REIFENHAUSER
More information
Special welding machines. High-speed valve bottomer, compact design, continuous bag forming, high-precision bottom geometry, super-fast format change, virtually non-stop production. Double unwinding stands for patches and valve material Emergency cooling for welding element...
2015 | 300048741 | STARLINGER
More information
Packaging machine. Carton packer Mariani, year 2010 For gable top cartons 1lt and 0,5lt Formats : 3x4x1 e 2x3x1 The machine was completely refurbished in 2015 by the manufacturer....
2010 | 300035384 | MARIANI
More information
Single screw repelletizing line. Air Colling Type Waste recycling and pelettinzig machine for trims Dry Type Die Head with 90 holes and 1 temperature control zone Diameter of pelleting holes: 3.5mm Waste material may directly be pitched into the inlet with-out preceding smash trea...
2020 | 300048770 | MING JILEE
More information
Other Machines. YOTTA YBERIA P20R6 UV LED FLATBED PRINTER. UV drying inkjet printer, with application on rigid materials: glass, ceramics, ceiling, aluminum sheet, wood, door sheet, PVC plates, labels, also on flexible materials such as canvas, carpet, leather, pa...
2022 | 300048779 | YBERIA
More information
Coextrusion lines. Screws Diameter mm 50 x 2, 75 x 1 Screw type: Grooved feed barrier screw, with cross-hole mixing Die Head: Bottom-fed spiral die with 500 mm lip, adjustable concentricity Film thickness range: 25–150 microns Line speed: 9–90 m/min Calibration Basket...
2016 | 300048769 | RAJOO
More information
Extrusion Blow Moulding machines up to 2 L . includes: exit conveyor, low conveyor and grinder...
1999 | 300048793 | MAGIC
More information
Silos. 2x PP pellet silos made of polyester-glass laminate with a capacity of 50 m3 The pictures show how they are connected. They do not have an mixer, they were used to store PP material in pellets. Price for 2 silos....
2007 | 300048787 | PLASTICON
More information
Stretch blow moulding machines. SIG Blomax 8 Brand: KHS Model : Blomax 8 Year : 2006 Includes: 1. Chiller 2. Compressor WH15 Available immediately!...
2006 | 300048803 | KHS
More information
Pouch making machine. High-speed, three-side-seal, automatic bag making machine [with standing pouch unit] 1. Film : laminated film of all kinds 2. Roll size Body material / Maximum width: 1240mm Maximum diameter: 800mm (ø76mm paper core) Bottom material/ Maximum width:...
2008 | 300048823 | WUXI HONGCHANG PRECISION MACHINERY
More information
CNC machining centers. Pick up Jan 2026 before new machine arrives Axis/Travel distances/Speed/Acceleration X-axis/3000 mm/75000 mm/min/4000 mm/s² Y-axis/1200 mm/75000 mm/min/3000 mm/s² Z-axis/750 mm/70000 mm/min/7000 mm/s² B-axis/285/25200 rpm/7200 rps C-axis/520/20880 r...
2005 | 300048829 | GEISS
More information
Shredder. Rotor: Length 1.640 mm x diam. 540 mm Cutter house: 180 pcs rotor knives - 60 pcs stator knives Motor type size: 200 kW hydraulic Screen size: 30 mm holes Output: Up to 1.200 kg/h depending on the type of material, blower and feeding rate. Hopper inl...
2002 | 300048833 | HOLZMAG
More information
Coextrusion lines. Polyethylene film coextrusion equipment, three-layer with 225mm head, temperature controller by PLC SIEMENS with touch screen, basket max diameter 1.20m with motorized opening and closing, blades of h3.20 and width 1. 05, upper rotating calender, dou...
2005 | 300048835 | KIEFEL
More information
Loop handle bag making machine. Film reel width: max 1400mm Bag height: 250-630mm Bag width: 250-650 mm Loop handle: 150-160my Corner sealing station Spare jaw + spare parts...
1996 | 300048837 | WINDMÖLLER & HÖLSCHER
More information
Tetra Pak Filling Line. Complete Tetra Pak TBA19 125S line, year 2004 (Original format was 200slim, converted to 125slim), Including: 1. Filler TBA19 125S, V20 2. Straw Applicator TSA21 3. Tetra Multi Shrink 65 4. Tetra Conveyor Control System 5. Nitrogen Injection Unit ...
2004 | 300048856 | TETRA PAK
More information
Other Machines. Flexographic Platemaking Production Equipment Maximum plate size: 48” x 35” (1200 x 900 mm) Plate thickness: 0.76 to 6.35 mm Production Capacity: 4 m2/h Files: *tiff; *len Resolution: high res 2540 - 4000 dpi HighRes Optics: yes Optics number: optic...
2013 | 300048864 | ESKO
More information
Injection stretch blow moulding machines for PET bottles. Injection molding machine Nissei ASB 50MB Year of manufacture 2005 Includes loader and dryer, no mold available The pump motor is being replaced with a new model. Available immediately! ...
2005 | 300048840 | NISSEI ASB
More information
Other Machines. 1. Semi-new Auramo Forklift gripper AR-22RH-12 Range: 1750 kg - 2350 kg The rotary paper/film roll gripper provides safe and efficient vertical and horizontal transfer of rolls. Slim and smooth arm and frame design, optimum visibility and advanced hy...
2020 | 300048885 | AURAMO
More information
Double-shaft film slitter-rewinders. Thickness range: 30-300 microns Unwinder Max weight parent roll: 2000kg Inner diameter of shafts: 150/152mm hydraulic loading of mother reel Rewinder Rewinder Inner diameter of shafts: 76mm Webguide FIFE Number of blades: 7 x ESPO 7 x Dienes Nu...
2006 | 300048850 | EUROMAC
More information
Injection molding machine up to 250 T . ...
2017 | 300048923 | NEGRI BOSSI
More information
Tapes printing machines. Drying tunnels by hot air Multi width razor slitting station Friction controlled unwind mandrel with sound deadening rubber roller Twin turret rewind system with mandrels for 3" cores Flood-coating station for "release coat" Flood-coating station for...
1988 | 300039614 | SIAT
More information
Thermoformer. Max. sheet width: 1050mm Nº & type of heaters: Full Quartz element (FQE), 98 on bottom, 98 on top Power of each heater: 500 Watt on top 300 Watt on bottom Regulation of heating elements: Elements controlled in pairs of 2 via % or in zones via thermoc...
2012 | 300048908 | RIDAT
More information
Injection stretch blow moulding machines for PET bottles. Used Injection stretch blow molding machine Nissei ASB PF8-4B 2004 Made in Japan Injection molding cavities: 8 Cavities weight of the preform: 28 Grams Volume of the bottle: 750 ml Monitor Upgrade 2016 Includes: Dehumidifier and Dryer...
2004 | 300048886 | NISSEI ASB
More information
Grinder - Granulator. SINGLE-ROTOR GRINDER WITH PUSHER Real cutting section: 675x600mm Number of knives: 44 - Counter knives: 2 Rotor diameter: 310mm - Length 675mm Rotor rotation speed: 108 rpm Motor power: 18.50Kw - Motor speed: 147 rpm Voltage: 400 V 3P+T / 50Hz - Re...
2020 | 300048941 | DECOVAL SERVIPACK
More information
Injection molding machine from 1000 T. ...
2015 | 300048940 | KRAUSS MAFFEI
More information
8 Colours CI Flexo Printing Machines. Drying System: LPG Gas Mechanical Speed: 365 m/minute Doctor Blade Chamber Unwinder Turret - 800 OD Rewinder Turret- 800 OD HMI Control unit for Sleeve change/Temperature/Tension, and register 3 keypad controls Camera ReVision BST Edge guides for the...
2006 | 300048949 | UTECO
More information
Pouch making machine. The machine was made to produce bags from multilayer shrink films for meat, cheese, poultry and fish packaging. It can produce vacuum pouches in all their diversity in the form of 3-side seal, 2-side seal and tubular bags. This machine is able to pro...
2020 | 300048946 | LECHITA
More information
Bi-Injection moulding machine. Handling model: Linear system with lifting force of 25 kg / Y-axis 1800 mm / Z-axis 3000 mm Centering ring: 200 mm Ø EE2: 35 mm (mounted in L-position) Hot runner control points: 24...
2008 | 300048951 | DEMAG
More information
Bi-Injection moulding machine. Handling model: Linear system with lifting capacity of 25 kg / Y-axis 1800 mm / Z-axis 3000 mm Centering ring: 200 mm Ø EE2: 35 mm (mounted in L-position) Hot runner control points: 24 Hydraulic cores: 4...
2006 | 300048952 | DEMAG
More information
Bi-Injection moulding machine. Handling model: KUKA Ø EE2: 40 mm (mounted in L-position)...
2006 | 300048956 | DEMAG
More information
Glass bottles filler for W&SD. Triblock KOMPASS Rinser - Filler - Capper machine from 2004 For glass bottles. Gravity filling 24 rinsing heads 24 filling heads 6 capping heads Production: 12.000 bph (0,237 l) y 6.000 bph (1L) Type cap: Crown Has been filling water and fruit jui...
2004 | 300048918 | KOMPASS SRL
More information
Coextrusion lines. Thickness range: 20 to 120mic Dosing system : Gravimetric (5x) 15 components on all dosing Screws: 65,45,65,45,65 Heating zones: 6 zone each extruder Heating power: 18KW, 16KW, 18KW, 16KW, 18KW Driving system: Eurotherm Power: 74KW, 42KW, 74KW, 42KW,...
2007 | 300048955 | DOLCI
More information
Double-shaft film slitter-rewinders. Unwind Roll Weight: 2500kg Rewind Weight: 1400kg per pair arms Machine Speed: 1000m/min Unwind : 152mm (6") Shaftless Unwind Core : 152mm (6") Rewindcore: 76 & 152mm (3" & 6") Unwind Tension: 10- 100Kg Rewind tension range: 2-20kg per pair of arms Gu...
2013 | 300048953 | ASHE
More information
Mounter proofer. Mandrel length : 1240mm Mandrel diameter : 117,891mm 2x motorized cameras Application roller...
2018 | 300048964 | JM HEAFORD
More information
Injection blow moulding PP/PE/PVC and other thermoplastics. Full electric machine (Italian servomotos) No tooling included Blow clamp tonnage 110 kN Injection clamp tonnage 700 kN Shot weight HDPE 300 g Platen length 800 mm Machine center of pressure 420 mm Swing Radius 610 mm Trigger bar width 676 mm Ope...
2018 | 300048965 | ZHONGYA
More information
Injection stretch blow moulding machines for PET bottles. Used Aoki ISBM SBIII - 150N - 12 Year of manufacture: 2011 Includes dryer No mold Working hours: 54.000 In production and available immediately! ...
2011 | 300049015 | AOKI
More information
Other Machines. Semi-new, used once or twice since 2017. Offer includes: - 3D printer ProX DMP 100, 100 W Laser with accessories - Screen - Process Filter model 151605 - 30 work trays Details: Laser Power Type: 100 W/Fiber laser Laser Wavelength: 1070 nm Layer Thi...
2017 | 300048853 | 3D SYSTEMS
More information
Injection stretch blow moulding machines for PET bottles. Used Injection stretch blow molding machine Nissei ASB PF8-4B 2003 Made in Japan Injection molding cavities: 8 Cavities weight of the preform: 16 Grams Volume of the bottle: 450 ml Includes: Dehumidifier and Dryer ...
2003 | 300048992 | NISSEI ASB
More information
Rotary compression moulding press. Packsys Global Compression molding machine from 2003 Includes : KKP 4-32 presses MSM 5-FS slitting & folding machine KDP 50-24 liner Chiller Closure 2.7 gr PCO 1810 mold In production and available immediately!...
2003 | 300049041 | PSG
More information
Metallizer. The machine is specified to coat the following materials: Material: Film thickness: •BOPP 12 — 50 pm •CPP 20 — 60 pm •HDPE 25 — 60 pm •LDPE 25 — 60 pm •PA (Nylon)12 — 25 pm •PET 8 — 60 pm •PVC, unplasticized 20...
2008 | 300049047 | TOP MET
More information
Tetra Pak Filling Line. Complete Tetra Pak filling line A1 for TFA 250ml, year 2017. Very low working hours ! Including: 1. Filler Tetra Pak A1 TFA250, year 2017 2. Cardboard Packer 12 by Tetra Pak, year 2018 3. Domino Printer A300 Plus +, year 2018 4. Hand lifter for p...
2017 | 300049057 | TETRA PAK
More information
Washing plant drier. Semi-new. Never used in production, just tested. Mechanical dryer used for processing of dirty or wet plastics, as well as for the separation of impurities, including mixed fraction of pre-crushed plastic packaging. Max size of th material fed: 50x5...
2022 | 300049023 | SAVE RECYCLING MACHINERY
More information
Bottom weld flat bag making machine. Thickness 15-200 my Perforation unit inline...
2007 | 300049077 | BASFF
More information
Double-shaft film slitter-rewinders. Automatic and manual change in the winder Unwinder alignment with edge, reference line, or notch reading Winder core positioning via timed laser Reel unloader Automatic unwinder end-of-reel stop Stop at meters and diameter 8 lanes plus trims 2 electr...
2002 | 300049080 | USIMECA
More information
Packing machine for glass bottles. Cermex case erector, packer and gluer, year 2009 Output: 7 cartons/minute Refurbished and sold by Bedi in 2009 Acceptable carton sizes (in mm): - 200 mm minimum/500 mm maximum (length) - 140 min/400 max (width) - 110 min/350 max (height) Glas...
2009 | 300049078 | CERMEX
More information
Other Machines. Laser Type 2 Fiber YAG pulsed Laser Power 250 X 2EA Resolution up to 10,160 dpi Maximum Cylinder Length Including Shaft 1,900mm Maximum Cylinder Diameter 350mm Maximum Cylinder Weight 500kg Cylinder angular speed up to 1,200 rpm...
2017 | 300049089 | DV TECNOLOGIE
More information
Grinder - Granulator. Cleaned and overhauled in 2025 2x machines for sale, price for 1 Rotor: Type: V-5 scissor-shaped Width: 1200 mm Diameter: 720 mm Hydraulic pump: 1.5 kW Material collection screw: 1.5 kW ...
2021 | 300049018 | EKOLINIA SP.
More information
Double-shaft film slitter-rewinders. ...
2003 | 300049100 | TEMAC
More information
Blister and Skin. Min-max cardboard size: 495x345mm - 770x500mm Film width: 540mm Positive die-cutting depth: 100mm Package height: 100mm Max blister reel diameter: 400mm Max skin reel diameter: 350mm Inner roll diameter: 70mm Max cutting force: 200,000N Cutting lengt...
2004 | 300049107 | ILLIG
More information
Laminators. Web width 650 - 1330 mm Coating material Paper : 40 - 200 gr ALU : 15 - 20 µ PA : 12 - 20 µ BOPP : 15 - 80 µ PET : 12 - 30 µ Web tension 2 - 25 daN Unwinder & rewinder cores diameter: 1x76mm - 1x152mm Coating / laminating Glue transfer roller: St...
1997 | 300037822 | NORD MECCANICA
More information
Grinder - Granulator. Cutting chamber dimensions: 560 × 800 mm...
2021 | 300049111 | AUMAX
More information
Other carton filling machine. Used ultra clean carton filling machine Elopak Shikoku USC120 from year 2003 Made in Japan No capper included Product: Milk The machine is stopped but still installed...
2003 | 300049123 | ELOPAK
More information
Pouch making machine. Box Pouch Bag Making Machine with or without Zipper High-performance machine designed for the production of box pouches, quad seal bags, and 3-side seal bags, with or without zippers. Double-lane production of box pouches, quad seal, and 3-side sea...
2017 | 300049134 | KUNRUN
More information
Thermoformer. Maximum speed: 25 cycles/min Minimum-maximum internal frame dimensions: 300x260 - 690x540mm Min-max material width: 330-720mm Forming height above the sheet: 120mm Forming height below the sheet: 40mm Max cutting surface on upper/lower table: 700x550...
1989 | 300049135 | ILLIG
More information
Label flexo printing machines. Web width: 420 mm Material thickness (min.-max.): Films: 20 - 250 my Paper and cardboard: 100 - 350 my Mechanical speed: 175 m/min Average consumption: 63.5 Kw Diameter of unwinder and rewinder cores: 76 mm, 150 mm Ink type: UV Drying system: U...
2008 | 300049149 | NILPETER
More information
Injection molding machine from 1000 T. Working hours 17,219 Includes: Robot SYTRAMA mod. 251G (Euromap 67)...
2017 | 300049157 | NEGRI BOSSI
More information
Extrusion Blow Moulding machines up to 2 L . ...
2004 | 300049167 | PLASTIBLOW
More information
Flexo Printing machines off line. Printing speed: 160 m/min 8 colors : 4 doctor blades + 4 fountain rollers Printing options: 8+0, 7+1, 4+4, 5+3, 6+2 Solvent or water-based inks Inner diameter of carrier cylinder: 181.553 mm; 226.116 mm, 270.430 mm Printing cylinders: sleeves with di...
1999 | 300049194 | VALMET
More information
Recycling plant EPS/EPE/EPP-waste. Production line for grinding EPS recycling beads. Line partly of own design to work as quickly and efficiently as possible with excellent german components. This production line consists of a 2 crushers and fine grinder, sorting line with 2 magnets a...
2012 | 300049201 | HEGER
More information
Mounter proofer. Plate mounting device with cameras for mounting on cylinders or mandrels with or without gears, repeat 245 - 1250 mm 2 screens Maximum printing width 1650 mm...
2009 | 300049207 | BIEFFEBI
More information
Unscrambler. Lanfranchi RMX 12 unscrambler from 2000 With empty bottle conveyor belt inlet Separate switch board In front vertical hopper and bottle flat conveyor PLC: Siemens S7 There are following in the set with unscrambler: air conveyer outlet, 3 bottles f...
2000 | 300030572 | LANFRANCHI
More information
Combination mixers. PLASMEC "COMBIWOOD-HC/300/1000/FV/W-PP/PE" MIXER FOR WOOD PLASTIC COMPOSITES. TURBOMIXER “TRM-300/FV/W” ¨ MIXING VESSEL TOTAL CAPACITY: 300 Liters ¨ MIXING VESSEL USEFUL CAPACITY: 255 Liters ¨ PARTS IN CONTACT WITH PRODUCT TO BE MIXED: AISI 304 ST...
2012 | 300033671 | PLASMEC
More information
Thermoformer. The machine has ceramic resistors and vacuum pump. Control system model: SIMATIC OP 37 The machine does not have plate loader neither automations for rolls processing. 1 cycle of production takes around 10 minutes for material width of 8 mm Moulds ar...
2002 | 300036637 | PERROS
More information
Lids printing machines. The machine has : - The loading hopper - Electronic processing - UV tunnel - Manual Stacker Production/hour max. : for a diameter < 125mm : 40.000 pieces for a Ø125mm to Ø290 mm : 330pcs / min or 20.000pcs / h - Ø Max of lids : 125mm in 2 lanes &...
2011 | 300037224 | OMSO
More information
Mounter proofer. Pressure cylinder Required scope cm 128 printing diam 180 shaft to put sleeve is 130,623 mm Plate cylinder Minimum format: cm 30 External format: cm 124 size: 295x104 height: 194 cm weight net : 1560 kg Dimensions and weight of the electrical part...
2002 | 300037303 | BIEFFEBI
More information
8 Colours CI Flexo Printing Machines. Plate thickness: 1.14 and 2.84 mm Adhesive thickness: 0, 5 mm Solvent based inks Anilox diameter: 127 mm Central drum double wall diameter. 1524 mm Lateral and longitudinal registers with remote control Closed chamber doctor blade Automatic pre-posit...
1999 | 300037735 | CARINT
More information
Injection moulding moulds. Glass 260ml (Compact) 6 cavities Weight of the product: 13 g. Capacity: 4000 pieces/h...
2015 | 300038154 | HOME MADE
More information
Teabag Packaging Machine . Automatic teabag packaging machine HST 25.2B from 2005 Total working time: 86.400 hours TeaBag Sizes: 1,2-2,2 grams double chamber teabag Speed (bags/min): 165 max. Energy consumption (kWh): 4,55 Machine in good condition and can be inspected in...
2005 | 300037253 | HST
More information
Sheet monoextrusion lines. Extruder single screw type CTR 65/35; MANUAL SCREEN CHANGER type COFIT FC manual Electronic probe for pressure and melt control MOD. DYNISCO PT 484. Flat die head TYPE LF - LFS - FP - 1300 3 Zone electric panel and double electronic pressure sensor P...
1990 | 300038485 | BANDERA
More information
Sheet monoextrusion lines. Complete extrusion line for PP and PS sheet production. 2 dosing units Moretto S.P.A., 2014. Min. - Max. sheet width: 350 - 850 mm Min. - Max. sheet thickness: 300 - 2000 microns Head width: 1000 mm Lip gap: 2 mm Degassing system: No Calender: ...
2012 | 300038633 | BATTENFELD-CINCINNATI
More information
Complete downstream lines for profiles. Complete downstream for PVC profiles: profile width: 300 mm - Calibration table 6 meters calibration width: 500 mm number of pumps: 4 - Haul off belt contact: 2500 mm - Saw -Stacking table: Includes foil laminating device...
1994 | 300038901 | VOBAU
More information
Moulds for Closures. Husky Hot runner from 2008 Rouxel watercap cold half with the slitting machine Taiwan hwa long without the thermocontroller PMS Mold Master Mold is working condition Neck 30/25 2gr 16 cavities Mold runs at 6,5 sec Dimensions of the mold: 885 x 380 ...
2008 | 300039326 | HUSKY
More information
Thermoformer. Resistance: total 112 (56 up and 56 down) size mm 60x250 and 600 W/cd with a total power of 67,2 kW. Vacuum pump 4 kW with flow 165 m3/h and pression 0,66 mbar PLC Siemens with software 6GK1561-3AA01 for the comunication with PC and 6GK1713-5CB61-...
2005 | 300039528 | ATEM
More information
Drawtape bag making machine. Bag making machine for bags with drawstring on roll Bottom seal bags on roll * Garbage bags with drawstring * Bags on roll without paper core Material: LDPE, HDPE, MDPE, LLDPE Max finished roll diameter: 130 mm Max finished roll width: 400 mm Bag...
1991 | 300040295 | COEMTER
More information
Cup Form-Fill & Seal machines. Cup Form Fill and Seal machine ERCA MF7, year 2013 Format: Cups 50gr 2x3 units Water: 1m3/h at 2-4 bar Compressed air flow: 230 Nm3/h, 6-7 bar Includes: - Sock and membrane dosing unit with sweeping air and filling under laminar flow. - Seal fil...
2013 | 300040484 | ERCA
More information
Foam extrusion line. Production line for EPE foam sheets EPE foam tube (optional; ask for the cost) Working hours 1200h, Like new, Include two changeable line for tube & sheet to one extruder L/D54, Include all auxiliaries (special pumps, spare parts, pipes e.t.c), To...
2008 | 300028625 | SANMENG
More information
Sorting and separating plant. The NIR sorting line for (Fridge) hard plastics. It was using for sorting the WEEE plastics and for fridge plastics. The line was purchased without compressor. For Fridge plastic – the purity is usually 85-95 %. It depends of the PUR content. The ma...
2012 | 300041385 | REDWAVE
More information
Labelling machine for glass bottles. Labelling machine for glass bottles COMEN SR/2 from 2003 Capacity 3000 b/h Size of bottles 0,5L For front, back and neck label Hot and cold glue. Machine is in good condition, can be inspected in dry cycle and available immediately! ...
2003 | 300041556 | COMEN
More information
Moulds for Closures. Plastisud Mold (Made in France) Mold: 72 cavities Format: 30/25 low Weight: 1,82 gr Manufacturer: Plastisud Mould dimensions : Width 640 x Length 1 590 x Thickness 700 mm Press : Netstal Synergy 3500 Guaranteed cycle time with cooling to temperat...
2007 | 300041699 | PLASTISUD
More information
Palletizer. Automatic palletization system KUKA Offer includes: 3 x KUKA Robots from 2014 Capacity: 72 000 cph, in packs 6x4 Palletization for cans, was used for beer Machine in perfect working condition always serviced by KUKA with all maintatance reports a...
2014 | 300041903 | KUKA
More information
Independent Rewind Stations Film Slitter-Rewinder. Working speed approx. 350 meters. Mechanical speed 500 meters/minute Shafts mm 70/ 76/ 152 13 razoe blades 4 pairs of rewinding arms 2 expansion rewinding shafts mm 2200 1 Giugni printing machine for logo Materials HDPE 7 my. Bopp 15...
1993 | 300042369 | LAEM
More information
Paper bag making machines. Nanjiang WFD 400 High Speed Automatic Paper Food Bag Machine This machine is built to make paper rolls or printed-paper rolls into flat & satchel bags for packing fast food like bread, loaf, KFC. Paper Baguette bags. It is equipped with CRT for ea...
2015 | 300041897 | NANJIAN
More information
Separators and centrifuges. Clarifying centrifuge Andritz Freedom CA 71 Volume of the drum: 18lt Revolutions x minute: 6.800 Liquid flow: 3.500 L/h Solid percentage: 21% Working temperature: 90 Cº Power: 15Kw Weight of the machine: 1180kg Machine has never been used ...
2017 | 300042517 | ANDRITZ
More information
Single-shaft film slitter-rewinders. Materials: natural insulating paper : sp.0.047-0.200mm , density from 0.80-1.0 g/cm3, humidity 4-8% by weight semi-conductive paper : thickness 0.070-0.120mm, : density from 0.80-1.0 g/cm3, : humidity from 4-8% by weight Laminated : paper (20%) : ...
2012 | 300042582 | H7GROUP
More information
Other Dairy Machine Type. Tetra Alcross Ultra Filtration system, year 2011 Product feed: Skim milk 0,05% Feed flow: 10.000 l/h Permeate flow: 3557 l/h Retentate flow: 6443 l/h Feed temperature: 10 degr.C Retentate temperature out: 12 degr.C 500 working hours (September 20...
2011 | 300042106 | TETRA PAK
More information
Chemical filling lines. Filling machine manufactured by TECNODISEÑO MURCIANO, S.L., the model is DOSF. CHICLE. It does not have a manual. It is a machine for packing chewing gum, as the original product, although it currently packs solid cream. It can fill from 10 ml to 20...
2001 | 300042720 | HOME MADE
More information
Extrusion lines for nonwovens. Lline for production of polymeric and nonwoven material Melt Blown. Product weight range of 25-80g/ m2, fiber Fineness: 2-5 microns Product width: 1600mm Maximum output of the extruder: 1-1.5 tons /24 hours Enclosed steel platform with ladder, on w...
2020 | 300042785 | CANGZHOU YITAI TRADING
More information
Letterpresses. 7 colors (2 colors needs maintenance) + 1 UV Flexo varnishing Max. material width : 217mm Drying system : UV drying Mechanical speed : Max speed : 100 m/min (normal working speed 30-40 meters per minute) Video system BST 3 rotary die cutter Web cle...
1998 | 300042875 | NILPETER
More information
Extrusion line for PVC profiles. ...
2012 | 300043021 | CINCINNATI EXTRUSION
More information
Offset printing machines. 5 units waterless offset 14” incl. UV drying IST Typ M35-1-R-G/4kW Semi rotary hot stamping incl. Clamping cylinder and mounting unit Semi rotary embossing station with pressure control unit BST Semi rotary Die cutting station with pressure control u...
2005 | 300043120 | CODIMAG
More information
Bottom weld bags on the roll. Welding machine for the production of sealed and pre-cut bags with winding on coreless mandrels, automatically labeled with adhesive paper band Hydraulic reel lifter for shaftless unwinder for reels with max 1200 mm diam Automatic web guide FIFE Pho...
2012 | 300043182 | AMUTEC
More information
Labelling machine for glass bottles. Automatic rotary self-adhesive labelling machine for glass bottles Brand: Framax (made in Italy) Model: RLA-H06-S2-L2-D480 with 6 heads and 2 labelling stations for application of 2 self adhesive labels Output: 3000/4000 cph on a ciclindrical bott...
2014 | 300043197 | FRAMAX
More information
Injection molding machine from 1000 T. Working hours of the machine: 7163 Reinforced screw. No moulds for sale Robot Husky TMA is included Year of production: 2008....
2008 | 300033372 | HUSKY
More information
Special welding machines. PP sack making machine Material to be processed: PP sleeve material Output: 28-32 pcs/min (depending on material density) Maximum diameter of the sleeve roll: 1250 mm Maximum width of the sleeve: 900 mm Tension control: floating roller Speed control...
2010 | 300043273 | POLYTEK
More information
Robot. Motoman robot 160Kg With Nx100 control unit Available from March 2022...
2007 | 300043278 | MOTOMAN
More information
Complete filling line for fountain water (19 L). Bardi water filler for 19L bottles Year of manufacture 2011 Output 300 bph Washer / filler Victoria 5G Junior / capper Siemens touch panel In good condition, currently disconnected and available immediately! ...
2011 | 300043488 | BARDI
More information
Bottle printing machines. includes Orientomatic unscrambler Drying system OVEN...
1995 | 300043725 | OMSO
More information
Rotomoulding mold. 1 mould for separate collection of glass 1700 lt 1 double-bottomed mould for 1700-litre waste bin 1 mould for glass/paper/plastic recycling bin 2200 / 2500 lt 1 conical mould for 2200 lt bin 1 double mould for 2500 lt waste bin 1 mould for 3500 lt ...
| 300043739 | HOME MADE
More information
Single screw repelletizing line. Conveyor belt - Lenght 7 m, Widht 900 mm Drive 0,55 kw Cutter- Extruder Combination Artec 125 V with simple degassing Screw diam. 125 mm Scew lenght: 6,4 m Motor drive 160 Kw Heating capacity cylinder: 49,8 kW Heating zones cylinder: 5 Manuel Scree...
2000 | 300043759 | ARTEC
More information
Cup Fill & Seal machines. Rotary cup fill and seal machine Packaging Automation Ltd. Model: Fast Fill 60 Original year: unknown (estimation 2008) Product: Yoghurt With hot sealing of the closure 2 cup molds: - round:72 mm - oval: approx. 45 x 60 mm Number of fillin...
| 300043811 | PA
More information
Extrusion line for corrugated pipes. Extrusion line for corrugated tubes/pipes in PE - Single screw extruder OEMER model CM70/30 motor 72 kW - Corrugator OLMAS C2/90 S - Coiler OLMAS Not included - Chiller COREMA JA/V 600 (price upon request) - 90 pairs of moulds 20/25 (price upon r...
2002 | 300043863 | OLMAS
More information
Cup printing machines. Production hours less than 3.000 Hours It can print conical pots, flower pots, cups...PS/PP Technical specifications Min. diameter . mm 50 Max. diameter mm 160 Min. height mm 40 Max. height mm 180 Max. height Printing mm 180 Taper ° 2 to 15 Max. sp...
2011 | 300044031 | OMSO
More information
Film coating plant. Adhesive tape coater ideal for label stock and self-adhesive tape Web Width: 1000mm Unwind Diameter: 800mm Rewind Diameter: 800mm Coating Head: Mayer Bar Drying Tunnel: Thermic Oil & Hot Air Type Of Machine: Water Base Acrylic Adhesive. Minim Coat W...
2014 | 300044227 | COMAX
More information
Digital printing machines. Inkjet Digita press with 7 colors and 1 UV dryer Corona treater - Yes Roll lift - Yes Printing Width 13" Printing Speed • Up to 50m/min (164ft/min) High Quality Mode • Up to 70m/min (230ft/min) Rapid Mode Working Hours 4337 h 55 min Unwind/Rewind •...
2018 | 300044271 | DOMINO
More information
T-Shirt flat bag making machine. Flexografic and bag making machine Types of bags t-shirt min. width of t-shirt [mm] 150 max, width of t-shirt [mm] depending on the number of tracks min. width of bag [mm] 150mm max width of bag [mm] 800mm film thickness [mic] hdpe 10-80, ldpe...
2017 | 300044284 | SALDOFLEX
More information
Extrusion Blow Moulding machines up to 2 L . Good maintenance. Improvements made in recent years: - Change of monitor. - Replacement of battery to PLC. - System of extraction and orderly delivery of containers by extraction gripper and conveyor belt. - Leak tester integrated inside the machine...
1991 | 300044334 | UNILOY
More information
Other Machines for Drinks. Bottle Top Crystallizer for Preforms Capacity: 28,000 pph Includes: ·Hopper ·Orientor ·Crystallizer ·Air chiller ·Thermoregulator Machine available Immediately! ...
2009 | 300044053 | BOTTLE TOP
More information
Shredder. The machine has been working only in cable shredding since 2009 Screen 10 mm...
2009 | 300044480 | WAGNER
More information
Extrusion lines for strapping tapes. Downstream for PP straps (Reggia) A) 1st Ironing (slow). Consisting of a metal frame with mounted : - N. 5 chromium plated and ground rollers, diameter 190 mm - length 200 mm, driven by an alternating current motor of 3 kW at variable speed with I...
2020 | 300044573 | CANZIANI
More information
Cup Fill & Seal machines. Cup fill and seal machine Hugart DS 20000, year 2005 Capacity: 16 000 cups/hour Cup diameter: 75 mm Cup volumes produced: 80gr. and 130gr. According to the specifications, main dozer can fill 50-300 ml, pre dozer 10-150 ml Cup and closure cleanin...
2005 | 300044576 | HUGART
More information
Moulds for Preforms. Used cold Half for preform Brand: Husky Weight: 12.5 gr Neck: 29/25 for still water Cavities: 96 cav. Pitch = 50 x 140 HPP 4.0 Mould number of shots: 305.185 take out plate ( with 384 pcs of tubes )+ coolpik tubes ( 96 pucks and 288 pcs of tubes):...
2014 | 300044628 | HUSKY
More information
Mono extrusion lines. Film width : 400mm - 1000mm Thickness : 25micr - 130micr Output extruder : 75 - 120kg/h Gravimetric dosing system / 5 components 5 TSM vacuum loaders, TSM Blender Screw 90mm ; L/D 27 10 heating zones Driving system : PLC + inverter Power : 125kW Melt...
1996 | 300044642 | ALPHA MARATHON
More information
Glass bottles filler for W&SD. Irundin Sincronbloc 20-4 filler for still water in glass bottles, year 2005 Arol Euro VA capper (automatic rotating turret), year 2005 Capacity: 6000 bph Old rinser can be provided with the filler, but it needs some refurbishment to be fully oper...
2005 | 300044706 | IRUNDIN
More information
Extrusion Blow Moulding machines up to 10L. Complete EBM factory with following machines 1-AUTOMA AT10D - 2002 2- JWELL - BM 30D - 2020 3- AUTOMA APEX AT 500 M - 2008 4- JWELL - BM 30D - 2020 5- JWELL BM 5D - 2021 6 - JWELL BM 5D - 2020 7- TaizhouPET machine SG -2020 8- Arburg 420C Golden - 2...
2020 | 300044785 | AUTOMA
More information
Injection molding machine from 250 T up to 500 T . Robot Wittmann W631-0386 (2003)...
2000 | 300044857 | KRAUSS MAFFEI
More information
Other carton filling machine. ELOPAK Carton Filler Type PS 50 including carton packer Original construction year unknown Bought from ELOPAK 2003 complete overhauled Clean standard. Product shelf life: 14 days for milk Working hours 80.000 Format: A- Style with screw cap ...
| 300044890 | ELOPAK
More information
Injection molding machine from 1000 T. Price for hydraulic motor. Possibility of electric motor (price on request). Machine with accumulators....
2022 | 300044900 | ITALTECH
More information
Moulds for Extrusion Blow Moulding. For accumulation blow moulding machine Two molds: One mold for 120/150 L drums (additional segment for 150 L)- both drums can be produced with open head or two closures DIN 60 One mold for lid for open head drum...
1988 | 300044988 | HOME MADE
More information
Rotomolding machine. Rotomoulding equipment Brand: ACABE Model: RB-201 Equipment for the manufacture of PUR parts of different sizes. Moulding system without heat input - Impeccable condition. - With safety fairing and automatic closing. - Automatic stop system in case...
2005 | 300045099 | ACABE
More information
Patch handle bag making machine. Processed material LDPE, HDPE, MDPE, PP Condition: Ideal used 6 months Hours worked 6000 Bag type DKT, loop eye, welt, liner, 6 bag types Arrangement of bags: Single in stacks Width of bag (max-min) 760mm-70mm Film thickness (max-min) 12-150 micron B...
2018 | 300045077 | PLAS ALLIANCE LIMITED
More information
Homogenizer. High pressure homogenizer Gaulin 2500 - MC 45 - 5TBS Original year: unknown, refurbished in 2018 Pressure: 5000 psi 2 stage HVA 2- 1/8" plungers In excellent working condition. Min. capacity 1000 gph, max. 2270 gph...
| 300045407 | APV
More information
Wines and spirits end packing line. Bertolaso still wine bottling line, year 1980 Capacity: 3000 bottles / hour Sizes: 25cl, 50cl, 75cl, 100cl Includes: - Accumulation table at the entrance of the line - Cobert / Bertolaso Olympia 16 spouts filler, year 1980 - Bertolaso Super Glori...
1980 | 300045410 | BERTOLASO
More information
Extrusion lines for nonwovens. Meltblown extrusion plant suitable for producing PP meltblown nonwoven for filtration applications such as face masks, automotive filters, vacuum cleaner filters, wipes, hydrocarbon and oil absorption sleeves 1 head with provision for inserting a se...
2021 | 300045509 | FARE
More information
Thermoformer. The high speed fully automatic pressure thermoforming machine, AMP series, for the production of food packaging articles are designed to fit moulds with multiple rows with integrated cutting system (simultaneous forming and trimming technology) to gi...
2017 | 300042844 | AMUT COMI
More information
Sorting and separating plant. Input Composition PE 950kg/h 95,00 % PP 50kg/h 5,00 % Total 1000 kg/h 100,00 % Number of valves 240 Valve pitch [mm] 8 Die diameter [mm] 2.5 SENSOR UNITS Colour C Description: CCD line scan camera for detection of different colore...
2018 | 300045557 | SESOTEC
More information
Thermoformer. This single station thermoforming machine is designed and built to meet the requirements of various production sectors, for small and medium production of thermoplastic materials with thicknesses ranging from 1 mm to 10 mm and maximum plate dimension...
2007 | 300045595 | QS GROUP
More information
Stretch film extrusion line. Complete line for stretch pvc production Average power consumption about 100 - 115 kW/h Single-screw extruder 120 mm Possibility to wind rolls on cores of diameters 76 and 112 mm (two sets of pneumatic expansion rollers). The line has two working h...
2013 | 300042646 | PLAST PROJECT
More information
Tetra Pak Filling Line. Tetra Pak TBA 8 complete filling line Year of manufacture: 2000 Version:110 V Format: 1L Slim Hours: 34.000 Output: 6000 cartons/hour Includes: Cap applicator 47 slim cap from 2004 Packer TCBP70 from 2001 Tetra tray shrink TTS51 from 2010 UHT an...
2000 | 300045677 | TETRA PAK
More information
Thermoformer. Maximum sheet size mm 1560x1060 Minimum frame hole size (width x depth) mm 355x255 Ceramic Heaters Quick Mold Change System with removable table Pneumatic counter mold Availability October 2023...
2006 | 300045702 | VILLA
More information
Chiller. Outlet temperature of water 15°C Ambient temperature 25°C EER (Energy efficiency rate): 5.19 Refrigerant gas: R407C Cooling circuit: 2 N of steps of reduction of cooling capacity: 4 N. of compressors: 4 N. of evaporators: 2 Fans: 8x2kW Air flow rate:...
2019 | 300045705 | PIOVAN
More information
Wrap Around case packers. Used Wrap Around Case Packer for secondary packaging Brand: Ocme Model: VEGA HT 40F Year: 2013 Formats: 33cl bottles the secondary packaging is 4 x (6x33cl) with a bottom carton pad dimensioned 393mm x 261mm 50cl bottles the secondary packaging is...
2013 | 300045709 | OCME
More information
Shrink Wrapper for PET bottles. Used Shrink Wrapper for bottle packaging Brand: Ocme Model: VEGA HT 40/2 Year: 2013 Formats: 33cl bottle, 4pack & 6pack 50cl bottle, 4pack & 6pack Secondary packaging is made with an Ocme Vega HT 40F Machine installed but not running ...
2013 | 300045710 | OCME
More information
Cast coextrusion lines. Finished Products: Stretch film, PP film (12 – 60 mkm) Number of layers: 3 Speed: 50-400 m/min Automatic flat die REIFENHAUSER, width 2900 mm Output: up to 1200 kg/h, depending on material Cast line die: flat die type Lip gaps adjustable: 400-800 mic...
2003 | 300045735 | REIFENHAUSER
More information
Mounter proofer. Useful printing width 1500 mm Developments 300- 1200 mm Two cameras...
2001 | 300045761 | CAMIS
More information
Sheet monoextrusion lines. Dosing system included - number of components: 4 Average consumption (kW): 140....
1999 | 300045792 | BANDERA
More information
Grinder - Granulator. Feed opening: approx. 1000 Width x 1700 Length mm (with Bunker) Rotor width: approx. 700 mm Stator blades: 2 Rotor blades 10 Closed rotor Feeding hopper with 4 screw Electrical cabinet...
2012 | 300045810 | ZENO
More information
Ice Cream Machinery. Rokk 3-Tank CIP mobile cleaning in place system Suitable for capacities up to 1200 liters per hour Includes: a 100-litre detergent tank, 100 litre rinse tank, 100 litre fresh water tank, delivery and return pumps and a control panel all mounted to ...
2021 | 300045832 | ROKK
More information
10 Colours CI Flexo Printing Machines. Double automatic unwinder and rewinder, reel diam max 800 mm Video BST Premius Digital Mechanical Speed 350 mt/min Mounter and proofer Bieffebi Sleeves 10x330 10x340 10x350 10x360 10x370 20x380 10x390 20x400 10x410 10x420 10x430 14x440 10x450 10x460...
2006 | 300045846 | FLEXOTECNICA
More information
Moulds for Closures. OMMP injection mould for fruit-oil closure 29/21, year 2012 16-cavity mould Neck: 29/21 edible oil Approx. weight: 1.7g Material: LDPE 8.1 million shots Includes: - Hot runner system Yudo. - Heating thermostat with connection cables (Multitherm 4...
2012 | 300045927 | OMMP
More information
Other processing machines. Machine for making short pasta machine - pressing plant Manufacturer: Rolmark Model: TR-1000 Year: 2006 Capacity: aprox. 650 kg/h (depending on product) Matrices included: - Crimped auger - Spinner - Wiggle - Braid - Lobe 1000mm Machine was work...
2006 | 300045969 | ROLMARK
More information
Labelling machine for glass bottles. Krones - Starmatic labeller from 2018 rotary Paper labels For glass bottles 14850 bottles per hour 300ml-1l bottles In excellent condition and available immediately! ...
2018 | 300045965 | KRONES
More information
Side weld bag making machine. Material type: LDPE; HDPE Mother roll width : 1400mm Mother roll diameter : 1200 mm Bag width: min: 90 mm; max: 900 mm Thickness: min: 40 my; max: 200 my Bottom gusseting : yes Side gusseting: yes Photoelectric cell control : Yes Web guide: Yes...
1993 | 300045967 | STIEGLER
More information
Label flexo printing machines. Mechanical speed: 15-150 m/min Two unwinder- diam. max. 800 mm Unwinder shaft: 76 mm One rewinder- diam.max. 800 mm Rewinder shaft: 76 mm Web guide Video system: ELSCAN Rotary die cutting Delam/relam unit GEW UV drying system Max. waste rewinding: 70...
2001 | 300046028 | NILPETER
More information
Glass bottles filler for W&SD. FILLING AND CAPPING MACHINE FOR GLASS BOTTLES 330ML BIENKOWSKI FROM 2018 Capacity 2000 bph 1.FILLER MACHINE NBP-12 2.ZAP-1 1-HEAD CAPPER 3.CAP FEEDER It was used for juices. Available immediately!...
2018 | 300046094 | BIENKOWSKI
More information
Injection stretch blow moulding machines for PET bottles. Aoki SBIII-250-50 - 2001 The # cavities depends on the container body dimensions and fluid capacity. The number of cavities range from 10 cavities down to 1 cavity depending on these parameters. This information is available via Aoki technical spe...
2001 | 300046107 | AOKI
More information
Twin-screw extruder for PE/PP compounds. Compounding Line for sale The machine is in constant operation, possible to perform tests. 1). Compounder Reifenhauser RZE 85-41-D, year of production 1998 - two degassing (one vacuum), - two filler dosing zones (two K-Tron dispensers included), - B...
1998 | 300046170 | REIFENHAUSER
More information
Single screw repelletizing line. Main drive power: 45 kW AC Heating Power: Extruder (40 kW) + Filter (10 kW) Semi-automatic hydraulic screen changer (without interrupting the extrusion) Dosing unit Degassing pump Cooling water bath Electrical control equipment with cooling Pel...
1995 | 300046168 | PREALPINA
More information
SIG Combibloc line. Complete SIG Combibloc filling line CFA 810-32 Manufacture year: 2001/2015 (installed in 2016) Working hours (November 2023): 4300 h Machine output: 10,000 cartons/h Format CB8 Midi: 500ml, 750ml, 1000ml with screw cap. Format adjustment 2 minu...
2001 | 300046220 | SIG COMBIBLOC
More information
Extrusion line for PVC profiles. Complete line for PVC/WPC RIgid profiles extrusion - Parallel twin screw extruder Bausano MD 90/23 Plus year 2008 with no.1 gravimetric - Calibration table Bausano BPN6/2P4 year 2008 - Haul off Bausano TN30/150MB year 2008 - Saw Bausano TAV160 yea...
2008 | 300046242 | BAUSANO
More information
Other Machines. Maximum production capacity: 800 pcs/min ►► Potential turnover will also depend on the number of pieces to be formed and the packaging whether 12, 14 or 16 pieces ►The size supplied is the DAY size. For the NIGHT size you will need new mould. But, i...
2004 | 300046304 | SANITARY PADS
More information
Laminators. Machine composition: Coating element Rotogravure trolley for solvent and cold seal adhesive coating in register Drying tunnel Primary unwinder reel holder Secondary unwinder reel holder Reel unwinder holder Laminating unit It was mainly used for PET...
2000 | 300045966 | SCHIAVI
More information
Coextrusion lines. Plastcontrol dosing system type GMU gravimetric control type PC5L with motors type RCM3 , loading type PCH400 Layer A Main dosing unit, hopper 100kg approx. Secondary dosing unit flow rate 0.3-40kg/h, hopper 25kg approx. Layer B Main feeder, hop...
2007 | 300046314 | KUHNE
More information
Other Machines. 2 BST Units from 2003 and 2008 . They where installed in a Fischer & Krecke 16S/10 press...
2008 | 300046318 | BST
More information
Labelling machine for glass bottles. Used Sacmi labeller Model: RMF/RA 1320 15T Type: S2 E2+S3 E3 ADH+CE+CM Year: 2006 Heads: 15 Electronic camara and optical centering . Speed: 12.000 bph 3 Self Adhesive stations 2 Cold Glue, precut label Glass bottle only Formats: 375 ml to 1500 ...
2006 | 300046417 | SACMI
More information
Label Inspection Machine. Knife and counter-knife cutting + razor blade cutting Control panel (one part is digital) 10 slitting knives + razor blade holder Winding shaft - diameter: 2x40 & 2x76 Max. mother reel diameter: 650mm Max. final reel diameter: 350mm Spare parts avai...
2000 | 300046465 | SMAG
More information
Winder for extruded film. SML winder and core handling system. Can be picked up in September 2024 Max Clear width 2600mm Winding shafts: 6”/ 3” Max. mechanical speed:250m/min Max. mechanicaldiameter: 980mm Film thickness range:15 –200 µm Edge trimming: In-Line with razor bl...
2016 | 300046485 | SML
More information
Injection Moulding Machine for elastomers/LSR. Shoes Injection moulding machines. Tri-injection. Two injectors 75mm, 1000cm3 Four injectors 55mm 700cm3 PLC Price for TWO machines. ...
1996 | 300046459 | MAIN GROUP
More information
Cup Form-Fill & Seal machines. Aseptic coffee cream form fill and seal machine BOSCH TFA2520 Manufacture year 1998, completely overhauled in 2018 Working hours from 1998 to 2018 (before overhauling)– 60.000 h Working hours from 2018 (after overhauling) to January 2024 - 4.000...
1998 | 300046500 | BOSCH
More information
Air Compressors (High Pressure). Used compressor for PET bottles the system is composed of: - Screw compressor ZR 250 VSD FF - 10 Bar - 252 KW - Piston Booster compressor ZD 2300 VSD - 40 bar - 145 KW working hours: around 35.000 machine not in use ...
2008 | 300046609 | ATLAS COPCO
More information
Extrusion Blow Moulding machines up to 2 L . 2 x AUTOMA PLUS AT 07D for sale (price per unit) Years: 1993 and 1995 Status: 1993 still in production, trial possible 1995 dismantled, trial not possible Materials: PE/PP blown container size: - 1 x 1L - 2 x 0,33 L - 3 x 0,25 L nu...
1995 | 300046646 | AUTOMA
More information
Other Machines. Plate size:31,5" x 42" (800x1067 mm) Laser head replaced in April 2023 Laser TH 2.0 R507-00134A Laser on Time 113h Including: Kodak Flexcel NX laminating table X-RITE361T Tabletop transmission Densitometer Software: Kodak Workflow Server, Kodak ...
2011 | 300046663 | KODAK
More information
Bottle printing machines. OMSO RS37 automatic silk screen printing machine...
1991 | 300046753 | OMSO
More information
Injection molding machine up to 250 T . 29.786 hours worked (on 18.03.2024)...
2016 | 300046778 | ARBURG
More information
Injection molding machine up to 250 T . 26.470 hours worked (on 02.04.2024)...
2016 | 300046777 | ARBURG
More information
Injection molding machine up to 250 T . Working hours: 62 609 (March 2024)...
2005 | 300046780 | KRAUSS MAFFEI
More information
Injection molding machine from 250 T up to 500 T . Working hours: 39348 (March 2024)...
2014 | 300046781 | KRAUSS MAFFEI
More information
Heating and cooling unit for moulds and dies. Accuchiller Water-Cooled Portable Chiller Model - NQW08 Nominal Cooling Capacity - 8 ton at 50°F LWT Voltage - 460/3/60Hz Tank/Pump Options - Tank & Pump Included Pump Size - 1.5 HP Pump Rotary Non-Fused Disconnect Switch - Rotary Non-Fused Disconne...
2019 | 300046576 | THERMAL CARE
More information
Cast coextrusion lines. Machine speed: 350 m/min Doteco gravimetrics, 3 components for each extruder Screws A extr-150 mm / 33, B-90 mm/ 33, C-75mm/ 33 Screen Changer Harms Hydraulic GmbH, 9EXT0452, Dynisco Automatic Flat die 3100 mm Chill roll diam & Width 1000 mm/ 320...
2006 | 300046888 | SML
More information
Paper bag making machines. Bag specifications: Length of bag tube: Cutoff length + 40 mm Cutoff length: 700-1050 mm (29 grades, each grade 12.5) Width of bag tube: 400-600 mm adgustment (no grade) Printing specification: Printing length: 600-950 mm Printing width: 1100 mm Co...
2006 | 300046893 | TECON PACKAGE MACHINERY
More information
Cup Fill & Seal machines. Semi-automatic packaging machine ILPRA from 2019 Model: PP 400 N Closes two trays at the same time (capacity 3700 cc, which is 2,5 kg aprox.) Capacidad 120-160 cph Tray dimensions 175 mm lenght x 151 mm width Working hours aprox. 1000 Availabl...
2019 | 300046879 | ILPRA
More information
Injection molding machine from 500 T up to 1000 T. Accumulators...
2019 | 300046929 | ENGEL
More information
Injection moulding machine for PET preforms. Used injection molding machine for PET Preforms Brand: Nissei ASB Model: PM-170/280 Year: Mar 2003 Number of cavity: 32 Maximum preform weight: 69 gr Neck format: 28mm PCO and BPF preform weight: 42,5gr - 43gr - 39gr - 39,5 Auxiliaries available: ...
2003 | 300046903 | NISSEI ASB
More information
Shrink extrusion line. Automatic pellet and additives loader with automatic dosing system (EP ) 3 extruders A/B/C : 45/80/45 Thickness range : 13-35 microns Thickness control system : Contrix capacitive head (Moretto) Fixed die head Diameter of the die head Gap: 1.3mm 2 A...
2007 | 300046962 | COMET
More information
Coextrusion lines. Extruders 2 x 50 mm 1 x 63.5 mm Die 175 Dosing units A and C 1+1 B 1+2 Corona Treatment Microperforator Thicknesses 7-150 my Tower With spare parts list: 2 gearboxes (1x10 - 1x20) 2 motors (stretching/collecting/calender) Winder springs Various e...
2002 | 300046964 | MAM
More information
Shredder. Screen size Diam: 16 mm Structure: Structural Steel No. of knifes: 50 knifes Blade dimension - Length: 39mm / Width: 35mm / Height: 20mm Motor: 1* 22 kw Feed size: 920 * 1124 mm (Approx.) Rotor speed: 95rpm Nominal shaft diameter: 250 mm shaft length...
2022 | 300046977 | ZAZPI
More information
Air bubble film extrusion line. Processed Materials: LDPE, LLDPE Thickness range (Min to Max.): 50 GSM to 700 GSM M/c Speed: 12 to 20 mtr per min (depend on GSM and microns) Number of extruders: 3 extruders Number of Layers: 5-layer machine with 2 unwinder system Dosing system (Typ...
2017 | 300047087 | YEN SHENG
More information
Thermoformer. Sheet width: 400-630 mm Cup stacking machine...
2015 | 300047109 | XUANHAI
More information
Aseptic systems. Complete milk UHT system GEA FINNAH Working capacity: 5000 l/h Max. Capacity: 6500 l/h (needs bigger capacity homogenizer) Max. temperature: 150 gr.C Including: - Tubular Sterilizer GEA Finnah, year 1999 - Aseptic homogenizer GEA Niro Soavi, yea...
2000 | 300047118 | GEA
More information
Injection molding machine from 500 T up to 1000 T. Robot included Brand : Jet Engine Model : JEII-IML-20 Year 2018 ...
2018 | 300047153 | CLF
More information
Injection moulding machine for PET preforms. Engel Macpet 320/150 injection molding machine for preforms, year 2008 Clamping force : 3200 kN Screw diameter : 150 mm L/D : 26 Tiebar Diametre : 115 mm Opening stroke : 600 mm Hours...
2008 | 300046923 | ENGEL
More information
Other Machines for Drinks. Ammonia chiller plant from GEA V1100 from 2011 Capacity 450 (KW), 130 (Tons) Ammonia Compressor 2 units, Evoperator, Falling flim unit, Ice water tanks, primary pumps 2 units, secondry pumps 2 units, control panel, Ammonia leak detector system and...
2011 | 300047141 | GEA
More information
Packaging machine. Film wrapping machine A+F from 2007 Model FEM 80-2-600 For minibrik 200 ml Formats 3x1, 3x2, 6x2 Capacidad 24.000 ph Working hours aprox. 47000 Available from septmeber 2024...
2007 | 300047272 | A+F
More information
Rotogravure printing machines. - Materials: PE, PP, OPP, PET, Paper, foil - Year 2016: mechanical and electrical overhaul - Min web width: 400 mm - Number of units: 9 - Reversible units: 8 and 9 - Drying extended units: 1 and 9 - Heating system : Electricity - Viscosity Control : ...
2008 | 300047275 | ROTOMEC
More information
Cup Fill & Seal machines. Cup filling line Ampack Ammann Modell 1/4 - Ultraclean Construction year 2008 Type: Carousel filler 1/4 The line include Cup feeding Cup sterilisation 3 Dosing units Dosing unit 1 : 20 - 250 gr Dosing unit 2 : 35 - 275 gr Dosing unit 3 : cereal 5...
2008 | 300047063 | AMPACK AMMANN
More information
Metallizer. Polyester(PET) 8 - 60 µm Oriented Polypropylene(OPP) 12-100 µm PVC 20-80 µm Low-density polyethylene(LDPE) 25-100 µm High-density polyethylene(HDPE) 25-100 µm CPP 20-80 µm The machine is also able to metallize other plastic films, such as Polyam...
2013 | 300047359 | NORDMECCANICA
More information
Shrink Wrapper for PET bottles. Shrkink wrapper for PET bottles SMI from 2014 Format bottle : 33cl - 1lt Format of package: 6X4 (0.33L) – 4X3 (1.0L.) Production: 40 U/min (0.33/0.45ml bottles) 20 U/min(1.0L. bottles) Manuals : Available...
2014 | 300047353 | SMI
More information
Single screw repelletizing line. Shredder with belt feeder built into the line Roll feed system Motor power: 30kW Main motor: 22kW with inverter Shredder motor: 11kW 4 thermoregulation zones Front cutting Pneumatic pellet transport system Control Panel, compliant with CE standards M...
2018 | 300047407 | ALTECH
More information
Digital printing machines. PRINTING Printing modes: Billboard: Up to 85 m²/hr (915 ft²/hr) Express: Up to 43.6 m²/hr (469 ft²/hr) Outdoor Signage: Up to 35.3 m²/hr (380 ft²/hr) Indoor Signage: Up to 21.1 m²/hr (227 ft²/hr) Photo: Up to 10.3 m²/hr (110 ft²/hr) White ink print...
2017 | 300047420 | HP
More information
Stretch blow moulding machines. Stretch blow moulding machine Yanced from 2015 Model: YS600 Capacity: 750 bph 1 cavity up to 6L Working hours 5500 Installed power 33 Kw The machine was producing: - 2 L round with neck Bericap 38mm, - 5 L round with mouth Bericap 48mm, - 5 L roun...
2015 | 300047491 | YANCED
More information
Stretch blow moulding machines. Stretch blow moulding machine Yanced from 2015 Model: YS600 Capacity: 750 bph 1 cavity up to 6L Working hours 500 Installed power 33 Kw The machine was producing: - 5 L round with mouth Bericap 48mm The machine can produce many other formats. Inc...
2015 | 300047492 | YANCED
More information
Other Machines. Digital printer focused on the production of sneakers and t-shirts. Prints directly on the sneakers without any treatment, durability and low cost. Features & Benefits Direct printing on shoes! Control Camera Position UV LED flatbed printer, 17.7 x 1...
2022 | 300047499 | IMPRIMO
More information
Air Compressors (Low Pressure). ...
2022 | 300047500 | BEKO
More information
Air Compressors (Low Pressure). ...
2019 | 300047502 | RENNER
More information
Air Compressors (Low Pressure). ...
2021 | 300047506 | AIRPRESS
More information
Shrink Wrapper for PET bottles. Shrink Wrap Equipment: ARPAC Model: BPMP-5342 from year 2006 Printed film registration for accurate and repeatable placement of printed graphics Heavy-duty frame construction with welded joints for high durability Gentle product handling with servo...
2006 | 300047484 | ARPAC
More information
Rotary compression moulding press. Sacmi CCM24 closure line from 2009 Includes slitting unit In good condition and available immediately! ...
2009 | 300045721 | SACMI
More information
Agglomerator. Product: Agglomeration plant Manufacturer: partly from PALLMANN, comparable to PFV 250 Agglomeration unit: Agglomeration unit, Siemens, energy efficiency IE3, 75kW automatic adjustment of the pressure pieces Rotating knifes, 5 kW, Option: 4 blade out...
2017 | 300047511 | PALLMANN
More information
Bottom weld bags on the roll. HIGH-SPEED FULLY AUTOMATIC BOTTOM SEALING MACHINE FOR BAG ON ROLLS WITHOUT CORE & WITH CORE SPECIFICATION Film size: 1200mm/max. Film width: 100~850mm X 1 line. 100~420mm X 2 lines. Film length: 285~455mm (with 4 sealing) 455-915mm (with 2 sealing)...
2017 | 300047513 | HEMINGSTONE
More information
Blister and Skin. Cycles per minute from 5 to 7 depending on material thickness...
2003 | 300047529 | OMG
More information
Washing machine for glass bottles. Vertical bottle washer Aquatech from 2022 Model: Multifunction washer With programmable cycles and two pumps or tanks to use up to 2 different products per cycle (detergent, sanitizer, liquids to remove stickers, etc...). It has 5 trays included f...
2022 | 300047349 | AQUATECH
More information
Other Machines for Drinks. Fanuc robot from 2019 Model M-10iD/12 Axis robot: 6 Reach: 1441 mm Load capacity: 12 kg Especially for narrow work spaces, or when being mounted upside down, highly versatile robot...
2020 | 300047454 | FANUC
More information
Bottom weld bags on the roll. Format length 4 sealing station 475- 740 mm 2 sealing station 750- 1300 mm Max roll diam. 130 mm Labelling unit Motorized star folder C folder 2 new rubber rolls for gusseting device Chain changed one year ago...
1999 | 300047540 | COEMTER
More information
Sheet monoextrusion lines. Complete extrusion line for the production of PP sheet, Single screw extruder TR 90 LD 38 without venting installed in 2019. Original screw was 80 mm LD 40:1 (The existing 80 screw & barrel & filter are in good condition and are to be sold with ...
2016 | 300040505 | UNION
More information
Bag filling machine. Vertical Bag-In-Box filler DS Smith, year 1997 Output: 100 bags/hour Formats: from 3L to 10L It currently fills still wine in 5-liter Bag-in-Box Still in production...
1997 | 300046389 | DAVID S SMITH LIQUID PACKAGING
More information
Anilox - cylinders and plates washer. It is used to clean anilox from 500 to 1730mm width...
2015 | 300047585 | SIMEC
More information
Cup Fill & Seal machines. Cup form fill and seal machine BETA PACK, year 2018 Model: BPT 20/40, 8 cavity Product: water, Aluminium foil lid. Cups volume are 140 ml and 200 ml. Shape is square Capacity: 9120 CUPS/HR In working condition ...
2018 | 300047577 | BETA PACK
More information
Mono extrusion lines. Die size 280mm Min max thicknesses 15-100 my Gravimetric dosing kluster 3 components Corona treatment Eurochiller Centrally controlled film guide Silos 5000kg...
2020 | 300047620 | DIING KUEN
More information
Stretch film extrusion line. Stretch film cast line, automatic and jumbo reels only Extruder "A" : 135/33 L/D • Output max. LLDPE 950 kg/h Extruder "B" : 60/28 L/D • Output max. VLDPE 200 kg/h Extruder "C" 60/28 L/D • Output max. LLDPE 200 kg/h Raw materials: LLDPE MFI 2 - 5...
2008 | 300047627 | SML
More information
Digital printing machines. Versión del producto: 6.0.100.36.0 Especificaciones técnicas: Velocidad de impresión: Hasta 3.450 hojas 4C por hora Resolución de imagen: 812 dpi a 8 bit, direccionabilidad: 2.438 x 2.438 dpi Máx. Tamaño del papel: 750 x 530 mm Gramaje del papel: ...
2015 | 300047640 | HP INDIGO
More information
Single-shaft film slitter-rewinders. Non-woven and textiles rewinding machine Thickness range: 15-200 g/m2 and more Unwinder roll core width: 200-2500 mm Unwinder roll core diameter: 76mm Unwinder roll diameter (max.): 1000mm Unwinder roll weight (max.): 300 kg Rewinder roll core wid...
2017 | 300047645 | ROLLTEX
More information
Thermoformer. Operating hours: 8000 Cooling fans: 8 Adjustable frame Quartz heating plate elements Size 240x150mm ...
2006 | 300047680 | VILLA
More information
Complete PET filling line for sparkling water. Products: mineral water Bottle type (basic): from 0.5 l to 2.0 l volume PET closing type: PP screw-cap format 30/25 Labels: paper (not from roll) Package format: 3x2, wrapped in heat shrink film Tray: Euro-type working hours of the line: tbc L...
1992 | 300047673 | SIDEL
More information
Complete PET filling line for still water. Products: still water only Bottle type (basic): from 0.5 l to 2.0 l volume PET closing type: PP screw-cap format 30/25 Labels: paper (not from roll) Package format: 3x2, wrapped in heat shrink film Tray: Euro-type working hours of the line: tb...
2000 | 300047674 | ALSIM
More information
Label Inspection Machine. Useful width: 600mm Max speed: 300m/min Ø unwinder: 600mm Ø rewinder: 800mm Ø unwinding core: 76 mm Ø rewinder core: 76 mm Vision with stroboscope: extra-long passage...
1995 | 300047696 | J.M. ASSOCIATS, CENTRE
More information
Label flexo printing machines. 9 colours with UV drying: IST system Film width: 120-280 mm front-loading unwinder, 3 inch mandrel automatic elevator for unwinder web insertion unit with tension control automatic web guide Erhardt+Leimer Arcotec corona treatment system Teknek web ...
2003 | 300047565 | GALLUS
More information
Tetra Pak filling machine. Tetra Rex filling machine, TR7 ESL SCA, year 2001 Capacity: 7000 uph Volumes: 250ml and 1000 ml. It was working with milk. The Tetra Pak Cap Applicator seals a pressure cap or screw cap onto each carton before it is filled, using an ultrasonic sea...
2001 | 300047521 | TETRA PAK
More information
Coextrusion lines. Film size - 900 to 1500mm Extruders - 55P-50P-55P-55P-55P-50G-55G & L/d 30 Thickness range - 20 - 150 micron Auto Gauge Control System by DOTECO Auto Loading & Dosing system by DOTECO (27 No. Hoppers) Dry-Air Humidifiers Enarcon Corona Treater, 4kW ...
2023 | 300047758 | WINDSOR
More information
Pallet wrapper. Wulftec WRTA-175 , year 2019 Max load size:56 " L x 56 " W x 80 " H Allen Bradley Micro800 Series PLC 24V control system Current overload protection NEMA 4/12 control cabinet (can be located up to 10' from machine frame) Autoheight sensing photoeye ...
2016 | 300047783 | WULFTEC
More information
Mono extrusion lines. Die head diam.: 400 mm IBC Max speed:70m/min Dual flow air ring Take-off 1200 mm wide Max rewind reel diam.: 900mm Web guide Dosing Units Calibration basket Air shafts ...
2012 | 300047177 | DOLCI
More information
CNC machining centers. Axis travel / speed / acceleration X-axis : 2890mm / 46875mm/min / 1200mm/s2 Y-axis : 1700 mm / 40909 mm/min /1200mm/s2 Z-axis 800:mm / 60000 mm/min / 1200mm/s2 B-axis : 285º / 14275 º/min / 1200 º/s2 C-axis : 520º / 18000 º/min / 1200 º/s2 W-axis : ...
2001 | 300047782 | GEISS
More information
Thermoformer. Forming/Cutting/Stacking Min-max forming area: 400x250 - 704x515 Tool width between film transport spars min-max: 420-724mm Tool length in feed direction min-max: 274-538mm Film width min-max: 454-760mm Max. gap dimensions per side: 12mm Feed length ...
2010 | 300047794 | ILLIG
More information
Other Machines. Bongard Omega2 electric heat oven Type: OMEGA2 603/3 - 123 oven Date of manufacture: 02/2017 Intensity: 55.5 A Total weight: 1,710 kg Heating output: 49.0 kW Connection power: 27.4 kW Voltage: 3N - 380 - 400V 50Hz TNTT Oven size: length 2.7 m width...
2017 | 300047544 | BONGARD
More information
Laminators. Duplex machine with trolleys for solvent and solventless Max. web width 1130 mm Min. web width (standard cones) 550 mm Min. web width (cones with extensions) 350 mm Max. coating width 1115 mm Feed speed 10-350 m/min 3 original rubber cylinders Mixe...
2001 | 300047864 | NORDMECCANICA
More information
Extrusion lines for strapping tapes. PP strap production Line (8 Lines) • Material: PP • Number of lines: 8 • Bandwidth range: 9-16 mm • Output: 200-280 kg/h • Speed: 150 m/min • Direction of line operation: left to right Extrusion: • Single screw extruder ø120 mm, L/D 38:1, rotating di...
2008 | 300047866 | JENN CHONG
More information
Other Machines for Drinks. Bottle warmer KHS from 2020 Producer: KHS Type: WICG 21-109 Year of production: 2020 (in usage starting from 05.2021) Capacity: 60 000 bottles/hour Available immediately...
2020 | 300047848 | KHS
More information
Other Machines for Drinks. Used can heater for soft drinks Brand: TMCI Padovan Working hours: only 4.000 Production: 35.000 cph Formats: Sleek 330ml 500ml - 150ml Slim Machine in working condition ...
2023 | 300047870 | TMCI PADOVAN
More information
Monobloc rinser filler capper. Filler and capper Irundin from 1993 for 8L Monobloc 12/4 12 filling valves and 4 capping Capacity 1.200 bph Still in production, available in March 2025...
1998 | 300047857 | IRUNDIN
More information
Grinder - Granulator. Max. sheet width: 1450mm Rotor diameter: 1450mm Feed speed: 10/30 mt/min 3 rotating blades Rotating blade length: 385x4mm 2 fixed counter-blades Average production: 400-600 kg/h Grinder motor power: 11 kW Roller drive gear motor power: 1.5kW Box aera...
2009 | 300047877 | TRIA
More information
Injection stretch blow moulding machines for PET bottles. Nissei ASB- PF6-2B v.3 from 2002 Includes: PET resin dryers 2 sets of molds to choose from: 3 Preform injection molds of 6 cavities (1 mold of 28mm neck of 40 grams, 1 mold of 28mm 50 grams and 1 mold of 38mm 70 grams) or 6 double cavity blow mo...
2002 | 300047881 | NISSEI ASB
More information
Extrusion Blow Moulding machines from 10 L. Useful size of plates between columns: 600 mm x 600 mm Opening stroke: 1000 mm Closing force: 200 kN Closing speed: 900 mm/sec Deflashing unit Possibility of producing a viewing strip Average consumption: 70 kW Minimum mould thickness: 155x2 mm C...
2005 | 300042630 | UNILOY
More information
Injection molding machine from 1000 T. Working hours 50,021 (Nov. 2024) Price upon request ROBOT Brand KUKA Model KR200L140COMP Year 12-2005 Available a similar Machine 1600 ton from 1993...
2006 | 300047922 | KRAUSS MAFFEI
More information
Stretch film extrusion line. Materials: LLDPE, MLLDPE Output: 300 kg/h Thickness range: 12 - 30 micron Number of extruders: 3 Screw diameter: A - 60 mm, B - 100 mm, C - 60 mm Dosing system included: Extruder N.1: 1 hopper (1 component) Extruder N.2: direct feeding into the extr...
2007 | 300047923 | COLINES
More information
Injection molding machine from 500 T up to 1000 T. Used Materials - Polypropylene Final Products - Industrial Crates This injection molding machine was originally manufactured in 1999. In 2018, it was retrofitted with three servo hydraulic packs sourced from Baumüller, Germany, and an upgraded PLC...
1999 | 300047932 | SANDRETTO
More information
Other Machines. Complete plant for the production of microfiber composed by: 2 eFK texturizing machines brand Barmag 1 VarioFil machine with 6 positions (sections B/C/D), as well as chips feeding, storage, crystallization drying and distribution for sections B C D ...
2020 | 300047954 | BB ENGINEERING GMBH
More information
8 Colours CI Flexo Printing Machines. Central Impression Flexographic Printing Press for Printing Solvent Based Inks on Flexible Packaging With Eight Print Stations, a Dry Bond Laminating Station with Rotogravure Print Unit Capable of Adhesive Application and Registered Printing and a Ro...
2000 | 300047959 | FISCHER & KRECKE
More information
Trim presses. 15 Kw die cutter + cyclone Reel width : 800 mm Area : 1000 x 510 mm Speed : 25 to 130 strokes/min Can work with any material, PS, PP, pet, pe, ops, etc....
2000 | 300047979 | ILLIG
More information
Single screw repelletizing line. Equipped with Vacuum pump (For moisture or ink pressure better degassing performance and ECO environmental friendly) Double venting barrel design (For better degassing performance) Dual piston screen changer system (Larger filtration for better fil...
2020 | 300047985 | POLYSTAR
More information
Cooling tank. 3 units...
2005 | 300048010 | PERIPLAST
More information
Slitter-rewinders for Adhesive Tapes. Fully automatic slitter rewinder for tapes Final Roll Diameter: 240 mm Speed: 450 m/min Unwinder Type: Jumbo. Dimensios Materials: Adhesive BOPP, Masking tape Jumbo rolls to be converted: width 960-2000 mm, max diam. 1000 mm, inside diam. 3'' and 6'...
2010 | 300039542 | GHEZZI & ANNONI
More information
Monoaxial Oriented Line MDO. Film pulling unit Processed materials : mono and co-extruded PE films Ratio 1:10 Rolls diameter Preheating rolls 1-4 with 100 rubber rolls : 410 mm Exhaust pipes rolls 1+2 with rubber pressure roller 200 : 215 mm Tempering rolls 1-3 : 300 mm Cooli...
2012 | 300048028 | HOSOKAWA
More information
Air Compressors (High Pressure). High pression compressor SIAD Model: Tempo 950 Year of manufacture: 2005 Working hours aprox. Max. air pressure: 42 bar Delivery rate: 950 m³/h Rotation per minute 1185 Tank for compressed air SEVAL with capacit...
2005 | 300048030 | SIAD
More information
Moulds for Preforms. Complete Husky mold Hot runner, robot plate , cold half included 72 cavities, PCO 1881 26.3g + 27.1g Length 122mm, diameter 22.6 ...
2008 | 300048033 | HUSKY
More information
Moulds for Preforms. Complete Husky mold Hot runner, robot plate , cold half included PCO 1881 28.5g + 30.7g Length 122, diameter 24.8...
2008 | 300048035 | HUSKY
More information
Injection stretch blow moulding machines for PET bottles. Used Injection blow molding machine Brand: Nissei ASB Model: 50 MB V3 Year: 2007 Dryer: LTM - Motan Resin Hopper: not available Working hours 72333 (January 2025) Available end of 1Q 2025 ...
2007 | 300048041 | NISSEI ASB
More information
Ice Cream Machinery. APM Semi-Automatic Shrink Bundler, Model MSA-26SS. year 2014 Set up for a 90-degree product infeed; 27.5" wide intermittent motion cross seal bar, with 6" long x 14" wide product hold down; 96" long x 24" wide x 37" tall stainless steel wire belt f...
2014 | 300048045 | APM
More information
Complete PET filling line for sparkling water. Products: Still and Sparkling water Bottle type (basic): from 0.5 l to 2.0 l volume PET closing type: PP screw-cap format 28mm Labels: paper (not from roll) Package format: 3x2, wrapped in heat shrink film Tray: Euro-type Working hours of the li...
2000 | 300048052 | PROCOMAC
More information
Unscrambler. Posimat Micro L Bottle unscrambler for PET bottles Construction year 2018 Working hours : max. 2000h (2 x 5 hour shifts / week 5 h for 4 years) Rotation direction : right Bottle sizes and capacities 25ml, Ø30mm 45 b/min / 2500b/min 50ml, Ø34mm 4...
2018 | 300048058 | POSIMAT
More information
Stretch blow moulding machines. Used Stretch Blow Molding Machine Brand: Sidel Model: SBO 16 Series 1 Year: 1997 Neck: PCO 1881 Machine in working condition till March 2025 ...
1997 | 300048080 | SIDEL
More information
Injection moulding moulds. Tool with interchangeable cold part for spoon, fork and knife Dimensions: 800x560x522 For PP/PS material...
2014 | 300048075 | HOME MADE
More information
Injection molding machine up to 250 T . Included: Robot Wittmann, year 2007 Dega Mix 120; year 2006...
2007 | 300048088 | ARBURG
More information
Injection molding machine up to 250 T . Robot Wittmann W821-1029, year 2014 Dega mix 200; year 2006 Moretto hopper/dosing unit Accumulator...
2007 | 300048089 | ARBURG
More information
Other Machines. Horizontal Packaging machine PFM; model Pulsar They packaged various plastic products: spoons, forks, knifes. The PFM Pulsar is suitable for wrapping products such as: green leafy vegetables, pizzas, large bakery items, etc....
2016 | 300048090 | PFM
More information
Single screw repelletizing line. Conveyor belt with metal detector 4900mm*500mm Reel feeder RZ 80 2.500Nt (2018) Cutter feeder extruder combination PC 906T Modular venting system Closed water circuit on vacuum system Back-flushing screen changer -Screen size in operation: 2 x 170cm²...
2007 | 300048118 | EREMA
More information
Agglomerator. Plast-Agglomeration plant that has been working with PET and PS Agglomerator (PFV 250/20) Hot Melt Granulator (PS-HG 400x500): Stainless steel, 500 x 400mm, Screen 10mm with housing cooling Rotary air lock (PZSL 2.0 G): Driven via helical gear motor...
2001 | 300048011 | PALLMANN
More information
Glass bottles filler for W&SD. Used Krones returnable glass filler for beer and soft drinks Model: Mecafill VK2V K126-308 Manufactured 1986-87, commissioned 1988 · 96 filling valves/18 capper heads, short filling tubes · clockwise direction (L-R), diameter 2.880 · double evacuati...
1986 | 300048131 | KRONES
More information
Coffee Packaging Machine. HORIZONTAL PACKAGING MACHINE COFPACK H/S 180 DOYPACK from 2020 - width of a foil on a roll: ~70-650 mm - doypack dimensions: (w x h): ~70-180 x ~110-300 mm - sachet dimensions: (w x h)...
2020 | 300048122 | COFFEE SERVICE SP. Z O.O.
More information
Separators and centrifuges. GEA Wstfalia GSC 60-28-077 Centrifuge – unit was in service but removed to install an upgrade - for malt and beer - 90HL/h ...
2014 | 300048143 | WESTFALIA
More information
Precision weighing equipment. Pipe testing laboratory 1. ELECTROHYDRAULIC PRESS Dim. mm. 2,200x H. mm. 2,800 (complete with no. two load cells, electrical panel, when controls, etc.) 2. LOYD TESTING MACHINE WITH ACCESSORIES 3. AST FAAR 4. MUFFELOFEN OVEN 5. ANALYTICAL BALANCE ...
2000 | 300048153 | HOME MADE
More information
Accumulation Head Extrusion blow moulding machine. Clamping force: 150 kN Daylight opening 320/600 mm Platen dim. 450x550 mm...
1991 | 300048140 | UNILOY
More information
Accumulation Head Extrusion blow moulding machine. Accumulation-head BFB 2-30T: automotive industry; manufacturing technical parts/air-ducts Clamping force: :300 kN Extruder :80/24D Clamping speed: 400 mm / s Hydraulic power: 22 kW Die head: BFKS 4 Accu-head capacity 6,3 liters Two step holder W...
1997 | 300048142 | BATTENFELD FISCHER
More information
Double-shaft film slitter-rewinders. Slitter with only 5736 operating hours: - Printed and unprinted materials : Lacquered aluminium 25 - 70 μ, Aluminium laminates 40 - 150g/m2 Aluminium embossed 105 - 160μ Central winding on two winding shafts supported by contact rollers Unwinde...
2013 | 300047904 | EUROMAC
More information
Extrusion Blow Moulding machines up to 10L. Clamping force 100 kN Opening stroke 250 mm Average consumption 25 kW...
2004 | 300048178 | MAGIC
More information
Double-shaft film slitter-rewinders. Materials and thicknesses: BOPP 20-40my Metalized BOPP 20-40my OPP 35my CPP 25-40my PET 12my Metalized PET 12my OPA 15my Laminates 20-150my Web guide Banel Shaft unwinders: 1x76 and 1x152 mm Rewinder cores diam: 76 and 152 mm Razor and circu...
1996 | 300043147 | COMEXI
More information
Letterpresses. Flatbed die-cutting system 5 letterpress colors 1 flexo varnish unit to refurbish Recommended production (strokes/hour) : 8000-9000 Reel diameter: 800mm CUTTING : Maximum die-cut size: 230*260mm Maximum cutting length: 5000mm Maximum speed: 14000 str...
1999 | 300048268 | MIDA
More information
Flexo Printing machines off line. Flexo Printing Machine for Paper Bag Maximum bag size for 1 printing / 1 rotation : 52,5mm x 60cm Maximum bag size for 1 printing / 2 rotations : 52,5mm x 60cm Maximum thickness of handles : 15mm Maximum handle height : 12cm Rubber or photopolymer c...
2003 | 300048301 | DCM
More information
Injection molding machine up to 250 T . Includes: Robot IML and device for labels IML Robotics Manipulador Compack - year 2017 Available for sale (Price on request): - IMM TOYO Si-350 V JH750C year 2012 + Robot and storage-dispenser labels IML ROBOTICS year 2012 - IIMM FERROMATICK E...
2006 | 300048304 | FERROMATIK MILACRON
More information
Injection molding machine up to 250 T . Includes: Robot IML and device for labels IML Robotics year 2017 Available for sale (Price on request): - IMM TOYO Si-350 V JH750C year 2012 + Robot and storage-dispenser labels IML ROBOTICS year 2012 - IIMM FERROMATICK ELEKTRA EVOLUTION 180 -...
2005 | 300048312 | FERROMATIK MILACRON
More information
Dairy bottling Line. Kosme Primafill 2014 with 32valves Fills: 400 ML 15,000 B/H 600 ML 15,000 B/H 1890 ML 6,500 B/H 3000 ...
2014 | 300048317 | KOSME
More information
Injection moulding machine for PET preforms. Husky Hypet 120 RS65/65 for PET preforms from 2013 Mold Dehumidifier: Not Available Color Dosing Unit: Not Available Dryer: Not Available Conveyor: Available the one under the Robot Hopper: Motan LBA 1200 (Not in Working Conditions) Dryer: Plasti...
2013 | 300048322 | HUSKY
More information
10 Colours CI Flexo Printing Machines. DT-U1000" rewinder and unwinder Shafts: mm76 and 152 mm Automatic register BST Automatic washing system KISS-AND-GO of Grafikontrol Grafikontrol 100x100 Defect Check,refurbished in 2019 Turning bar to print 8+8 at 50% of the max width Carrier no. 10...
2011 | 300048347 | UTECO
More information
Beer processing. BrauKon HopGun- Hop aroma processor machine Designed for: max. 50kg Hop type: Hop Pellets (Type 45 or 90) Design pressure: max. 3 bar / 43,5 PSI incl. pressure certificate: ASME-certification For dissolving hop pellets and transfer to the ferme...
2018 | 300048351 | BRAUKON
More information
Mono extrusion lines. Single-layer head with 2 die plates: one 180mm diameter used for bio with width 840mm and the other 220mm used for LDPE Ibc 1-component gravimetric system + 1 volumetric system for any additives (colored masters) Oscillating haul-off Tower Output w...
2007 | 300048354 | BANDERA
More information
Other Machines. The machine COSTA LEVIGATRICI K10 C 3200 is primarily used for calibration operations. It has the following purpose: to bring workpieces to a desired, uniform thickness and ensure precision for subsequent operations. The machine is designed for a wid...
2018 | 300048357 | COSTA LEVIGATRICI
More information
Injection molding machine up to 250 T . Working hours 30,000...
2005 | 300048366 | ENGEL
More information
Injection molding machine up to 250 T . Vertical machine 2 units available (the other one dates from 2004). Price per unit...
2008 | 300048374 | ARBURG
More information
Stretch film extrusion line. Film Width: 2500 mm Thickness: 12-50 micron Output: 1000 kg/h Materials: LLDPE No. of Extruders: 4 extruders (12.5%/15%/60%/12.5%) No. of Layers: 5 layers Dosing system: Guardian gravimetric blender (1000 lbs / hours, 250 lbs / hours), 2 components ...
2006 | 300048389 | BATTENFELD GLOUCESTER
More information
Monoaxial Oriented Line MDO. Max. thickness before stretching 400 µ Minspeed line 30 m/min Max.speed 200 m/min Thermal oil: Mobiltherm 605. (800 liters approx.)...
2011 | 300048392 | JIN MING
More information
Wicket bag making machine. JK 600 ST Joke High Performance Bag Making Line for the production of wicket bags with wicketer equipped with: - Servo drive technology - SPS function control - Main operation by touch screen - Product data memory and order repeat - Operating side...
2025 | 300048429 | JOKE
More information
Pasteurizer. Tetra Therm Aseptic Drink Plate pasteurizer Capacity: up to 12.000 l//h. Currently set to 6.000 l/h Temperature up 125 degrees Heat exchanger Tetraplex, year 2012 Dearator included Machine is in a warehouse since middle of 2024 , Can be te...
2012 | 300048456 | TETRA PAK
More information
Chiller. Refrigerant charge : R407C PS (high side/low side) : 27/22 bar TS (High side) : -10 +95°C TS (low side) : -10 + 55°C Full load current : 77.7 A max Power consumption : 42.5 kW max Condensing air inlet : 25°C Process water outlet : 15°C Cooling capaci...
2017 | 300048487 | EUROCHILLER
More information
Ultrasonic welders. ...
2017 | 300048488 | BRANSON
More information
Extrusion line for PE/PP pipes. Complete BEIER PE pipe extrusion line 20-160mm (used just for tests) 1. Vacuum loader 500kg/h 2. Mixing Dryer system 800kg 3. BRD60/38 single screw extruder Heating zones: 5, Heating power: 3.5kWx5; PLC control system(Siemens) in English Drivi...
2016 | 300048483 | BEIER
More information
Mono extrusion lines. L/D: 30 Film thickness: 0.005 - 0.08 mm Maximum roll width: 500 mm Maximum roll deameter: 800 mm Die head: 60mm, 75mm Die head type: fixed Gusseting device Corona treatment device....
2013 | 300048512 | KUNG HSING
More information
Injection molding machine from 250 T up to 500 T . 05/05/2025 Working hours - ~25,000 h ...
2020 | 300048511 | DEMAG
More information
Grinder - Granulator. ...
2004 | 300048516 | TRIA
More information
Extrusion line for tapes (woven sacs). Tape stretching line is developed for processing high quality PP tapes. Flat die 1800 with reversible die lip Die width 1800 mm Die lip aperture 0.1-1 mm Operating speed max. 520 m/min Working width net up to 1650 mm Vacuum feeder and elliptic dosi...
2015 | 300048525 | STARLINGER
More information
Rotogravure printing machines. Rotogravure press with aluminum cylinder system/carrier+sleeve, excellent for making fast job changes. 1 single printing unit type QS-PRESS C1 6 QS-PRESS B1 units 1 reversible double printing unit QS-PRESS C2 Solvent-based inks OPG web Guide Pneumat...
2007 | 300048561 | UTECO
More information
Extrusion line for tapes (woven sacs). Tape Stretching Line starEX 1500 ES for the processing of PP Extruder Type E 120.33 TD voluTEC- volumetric granulate feeding and three-component dosing/mixing unit Automatic filter system Flat die 1800 mm with flexible die lip Edge trim recycling for...
2013 | 300048576 | STARLINGER
More information
Complete PET filling line for still water. Products: still water Bottle type (basic): from 0.5 l to 1.5 l volume (due the specifications of the filler the maximum format is 1.5lt) PET closing type: 30/25 Labels: Plastic Roll Fed Package format: 3x2, wrapped in heat shrink film Tray: Eur...
2010 | 300048577 | SIDEL
More information
Bottom weld flat bag making machine. Machine complete with folding unit, also suitable for the production of large bags...
2010 | 300048599 | VIARA
More information
Paper bag making machines. Fully automatic sheet feeding paper bag making machine Suitable paper: Kraft paper, art paper (laminated) Max. sheet size (LxW) 1200x600mm Min. sheet size (LxW) 620x350mm Sheet weight 120-190gsm Bag width 220-450mm Bottom width 80-170mm Bag leng...
2019 | 300048611 | ZENBO
More information
Coextrusion lines. Extruders: 50 /60/ 50 Die 300 mm with Gap 1.3 mm Thickness 20-100 my 3 Hopper loaders Conair...
2013 | 300048613 | RAJOO
More information
Digital printing machines. Hasta 80 m/min en EPM-Mode Resolución de imagen: 812 dpi a 8 bit, direccionabilidad: 2438 X 2438 dpi HDI (High Definition Imaging) Pantallas de línea: 175, 180, 196, 210 lpi Ancho de banda: 200 - 340 mm Máx. Tamaño de imagen: 313 x 980 mm Grosor del...
2021 | 300048615 | HP INDIGO
More information
Thermoformer. Full set of Illig RDM 70k (3g) line. Rol stand + preheater + RDM 70k(3g) + PH Illig stacker + grinder with blower Material Roll Stand, Type ROK 800 Material roll stand for material rolls up to 1200 mm diameter; Material width max. 805 mm 1 set of ...
2014 | 300048635 | ILLIG
More information
Bottom weld flat bag making machine. Bottom weld machine for jumbo bags Thickness : 50-200 my...
2002 | 300048641 | GÜNTER
More information
Other Machines. Model 168 DX: Horizontal Bag Forming and Filling machine The seller has used it for packaging of garbage bags rolls. These models are successfully used also for the packaging of soft disposable hygienic products. It can use PE/PP or other types of ha...
2017 | 300048647 | AMOTEK
More information
Single screw repelletizing line. Trim recyclingline air cooled Trim Basked Static ring The machine have been working only few hours...
2019 | 300048661 | PLASMAC
More information
Shrink extrusion line. Velocidad máxima: 30 m/min Unidad de orientación: Ancho útil: 900 mm ...
2022 | 300048669 | RL PLAST
More information
Stretch blow moulding machines. BLOW MOLDING MACHINE SIDEL SBO 2F Brand: SIDEL Model: SBO 2F Year: 2005 Mechanical Speed: 2000 BP Auxiliary Equipment: - Preform loader, hopper - Conveyors In production and available immedietely...
2005 | 300048501 | SIDEL
More information
Extrusion lines for monofilaments. Complete line for extrusion of HDPE monofilament, composed of -Extruder Leonard mod EM60BV from 2001 60 Kg/h: -Extruder head, elec., Capacity 53 kw – external diameter 450 x 250 mm -n.2 Die plates: n. 1 - 250 holes (1.2 x 7 mm) – n. 1 – 200 holes ( ...
2001 | 300048692 | LEONARD
More information
Digital printing machines. área de impresión: máx. 322 mm x 55 m - Gramaje del soporte: 40 - 350 g/m² (40 - 550 micras) - Velocidad 4/C: hasta 30 m/min - Resolución: 1.200 ppp reales a 4 bits (1.200 x 3.600 ppp direccionables) con densidad de punto variable - Sustratos: etiqu...
2015 | 300048592 | XEIKON
More information
Stretch blow moulding machines. Blow molding machine TECH LONG RJM6. Year 2014 In production. Can be seen in operation. Rotative machine. Working hours: 30.000 Necks 1881 and 1810 Includes tipper and preform loader. Spare parts included Moulds not available. Machine in good condi...
2014 | 300048716 | TECH-LONG INC.
More information
Thermoformer. Maximum sheet size: 2580x1580 mm Heating system: ceramic heaters 600W/400W PLC Villa Photo cell sagging control Pneumatic plug assist...
2007 | 300048731 | VILLA
More information
Injection molding machine from 250 T up to 500 T . Robot KM LRX 100 Working hours: 26 000 h...
2018 | 300048732 | KRAUSS MAFFEI
More information
Dairy bottling Line. Complete juice PET bottling line (different manufacturers) Bottle sizes: 300ml/200ml/180m Product: juice (cold filling) Including: 1. Unscrambler M1000, year 2009 2. Slat conveyor Airveyor Iwka Dawson, year 2016 3. Labeler Krones Contiroll ...
2009 | 300048753 |
More information
Saw for tubes. PE/PP pipe saw - IPM TP/U 200 with clamps from 32 to 200 mm year 2004...
2004 | 300048760 | IPM
More information
8 Colours CI Flexo Printing Machines. Materials:BOPP,PET,PE, Paper Mechanical speed 200 mt/min Single uwinder and rewinder Web guide BST ekr1000 Corona treater Softal 8 electric pumps Manual registers Video BST Handyscan 200 Anilox 2x 140 l/cm ,v12,8 1x 220 l/cm,v 8,3 1x 255 l/cm,v 12,...
1999 | 300042825 | WINDMÖLLER & HÖLSCHER
More information
Complete Can filling lines. Complete Krones can filling line for beer and CSD from 2013 Includes: Krones can filler 28 valve volumetric filler Ferrum sealer - 5 heads FMT Depalletizer and rinser CSW can lid seamer Krones Checkmat Videoejet - can coder and tray coder W...
2013 | 300042336 | KRONES
More information
Saw for tubes. with universal clamps...
2000 | 300048768 | IPM
More information
PET Filler for W&SD. Used monobloc for PET and Glass bottles Pitch: 113mm production: 12.000 bph format parts for 1.5 and 2.0 L PET filler also suitable for filling 1 L glass bottles the machine will be in working conditions until end of september 2025 ...
1998 | 300048773 | KRONES
More information
Tetra Pak Filling Line. Complete A3 FLEX 2000 Slim filling line. Includiing: - Filler A3 Flex 2000 Slim V100, year 2006. Working hours (June 2025) 21837 PAM-SAM upgrade of filler carried out an year ago . - Cap Applicator CAP 30 Flex V400, Helicap 26 Pro, year 2...
2006 | 300048777 | TETRA PAK
More information
Anilox - cylinders and plates washer. Minimum diameter of sleeve/cylinder :OD Ø 114mm Maximum diameter of sleeve/cylinder:OD Ø 360mm Maximum face length of sleeve/cylinder: 1400mm Cylinder/Sleeve washing capacity - 80 cylinders/Day Power requirement - No electricity. Need only pneumatic...
2021 | 300048788 | FLEXO WASH
More information
Head cutting. Lab Strand Pelletizer Strand Feed Support Rollers (adjustable) Fixed knife Rotary Knife with 20 cutting edges 2 units available (price per unit)...
2022 | 300048800 | LABTECH
More information
Head cutting. Side-cut pelletizer Pellet diameter range (mm): 1 to 5 Pellet length rang (mm): 0,25 to 30 Max output (kg/h): 110 (Pellet Ø 3x3) Knife rotor max (RPM): 1800 Number of rotary knives: 8 Max feed speed (M/min): 50 Knife rotor drive (kW): ...
2022 | 300048802 | LABTECH
More information
Shredder. Weima complete refurbished by AMIS 2192 working hours 25mm and a 50mm screen Conveyor not included...
2020 | 300048807 | AMIS
More information
Injection molding machine up to 250 T . New hub included Table diameter 1800 mm...
2012 | 300048822 | ARBURG
More information
Other Machines. Machine Usage: The Ceradrop F-Series is a digital printing platform for functional materials, combining several technologies (inkjet, aerosol jet). It is designed for advanced research and prototyping applications. The machine enables precise depo...
2022 | 300048826 | CERADROP
More information
Tabletting machines. Shrink Wrapping Machine (Wrapping Machine)...
2017 | 300048852 | DEPOSITEMBAL
More information
Injection stretch blow moulding machines for PET bottles. Used Nissei 70 DPH injection strech blow molding machine Year 2006 Includes: 44gm injection core: 5 pcs 39gm injection core: 5 pcs Injection cavity block + injection cavity's: 5 pcs Blow mold + blow shell: 5 pcs Lip cavity plate: 4 sets +80 mm n...
2006 | 300048866 | NISSEI ASB
More information
Pipe belling and socketing machine. 4x IPM belling machine (price per machine) - 3x BA160/PP mm year 2004 shared tools 32-40-50-63-75-90-110-125-160 mm - 1x BA/200/PP/A year 2005 200 mm tools Available at the end of 2025...
2004 | 300048874 | IPM
More information
Injection molding machine from 250 T up to 500 T . MACHINE WITH CARTESIAN ROBOT HILECTRO MOD.V-1300 ID YEAR 2021, UNLOADING BELT AND PROTECTIONS WITH SAFETY CONTROL Working Hours 72...
2021 | 300048875 | HAITIAN
More information
Vertical cutting machines. Cutting machine for PET blocks Dimensions blocks to cut 2600x1400x1300mm...
2010 | 300048889 | CROMA
More information
Other Machines for Drinks. Pentair Reverse osmosis system for still water Capacity : 6 m3/hour Includes: - Industrial water filter system 3 steps, prefilter and water softener - Reverse osmosis system Codeline Available immediately! ...
2011 | 300048580 | PENTAIR WATER
More information
Injection molding machine from 250 T up to 500 T . Used materials: PP, PE, PA, PA+30%GF Working hours: 69,790 as of 21/07/2025 ...
2006 | 300048841 | ENGEL
More information
Injection molding machine from 250 T up to 500 T . Used materials: PP, PE, PA, PA+30%GF Working hours: 82,212 as of 21/07/2025 ...
2007 | 300048844 | ENGEL
More information
Special welding machines. Machine for the production of laminated bubble film bags with three-sided welding and cutting with the option of adding adhesive tape. Finished products: 1. Envelope with three-sided welding: paper, aluminium, laminated bubble wrap. (Small size e...
2019 | 300048898 | MING JILEE
More information
Bi-Injection moulding machine. - Handling model: linear handling system, Demag, type Ergotech, type W621-1176, built 2003 (mounted above the clamping side) travel X/Y/Z 550 x 1,000 x 2,000 mm Load capacity (e.g. robot/arm): 10 kg, control panel - Minimum daylight: 340 mm - ...
2001 | 300048895 | DEMAG
More information
Tetra Pak Filling Line. Complete Tetra Pak filling line TBA19 250B from 2005 Version: 020V Volume: 250 ml Format: Base Hours: 25.000 Includes: Straw Applicator TSA21 Multi Shrinker MS65 Conveyor 18m Was filling milk In good condition, can be shown in dry cycle and ava...
2005 | 300048903 | TETRA PAK
More information
Injection molding machine from 500 T up to 1000 T. Accumulators...
2010 | 300048873 | HAITIAN
More information
Injection molding machine up to 250 T . Linear handling system, Demag Ergotech, type Wittmann W721-1171, year 2008, travel X/Y/Z: 550 x 1,200 x 2,000 mm, machine control, Demag, type NC4, handling system, w. control panel, machine enclosure Minimum daylight: 250 mm Locating ring: 125 mm ...
2008 | 300048901 | DEMAG
More information
Dairy bottling Line. Dairy PET bottling line AVE Unibloco NH EFS 16R/16S/4VC Capacity 6000 bph (250 ml) Bottles: PET 125ml, 250ml, 650ml , 750 ml with HDPE cap Product: dairy drinks, liquid yogurt The line includes: - AVE Unibloco filling machine, year 2020 - BDK ...
2020 | 300048930 | AVE
More information
Cup Fill & Seal machines. Cup fill and seal machine Trepko 234-2KSP, year 2011 Capacity: 7,000 (Cup/hr) Plate Heat Exchanger/PHE, Dynamic mixer, Cup filler & sealer m/c , conveyors , date coder, rotary table. Formats: 170 gr and 400 gr. Cup diameter 95mm. ...
2011 | 300047132 | TREPKO
More information
Metallizer. PET : 10-60 Mic PVC : 20-100 Mic HDPE : 25-100 Mic OPP : 12-80 Mic LDPE : 25-100 Mic CPP : 20-80 Mic Reels dimensions : Max. Metallising Width : 1200 mm Min. Metallising Width : 600mm Internal Core Diameter : 152 mm Max. weight : 1800kg Winding Dat...
2007 | 300048954 | GALILEO
More information
Extrusion Blow Moulding machines up to 10L. Kautex KEB 8 CoEx6 Fully overhauled including new control system BBM-Beckhoff Mould platen sizes (mm) 460 Opening stroke (mm) 300 Clamping force (kN) 160 - Mold dimensions : 560 mm height, 460 mm width, 2x160mm thick - Single cavity Continuous extr...
1992 | 300048987 | KAUTEX
More information
Injection moulding machine for PET preforms. Husky GL300 IMM for preforms from year 2010 (Refurbished) Includes: Dryer: Plastic Systems DR222 HT Hopper: Plastic Systems H4500 Mould Dehumidifier: Plastic Systems ,Viopan Can seen in Nameplate Upgrade PET Drying System For 550 Kg/H Refurbishme...
2004 | 300048985 | HUSKY
More information
Other processing machines. Multivac Galaxy TS 355 semi-automatic tray sealer, year 2008 Capacity: up to 10 cycles/minute It removes air from the tray and injects an inert gas to create a modified atmosphere (MAP) that extends product shelf life Includes: GN1/8 mold and tool...
2008 | 300049001 | MULTIVAC
More information
Cup Fill & Seal machines. Cup fill and seal machine Trepko Model 245KS, year 2012 CIP/SIP system Removable Hepa Filter 1-6 lanes• Product filled: yogurt Power supply / Compressed air pressure 3 x 400 V + PE + N / 6 bar • Number of lanes and maximum output (for a 95...
2012 | 300049058 | TREPKO
More information
Pasteurizer. ·Tetra Therm Aseptic Drink System (4th generation) - 2011 ·Capacity 20 gpm ·Multitubes CMRF/CM. This is for regeneration product to product so heat regeneration efficiency is 87% (very high) ·Tubes are Spiraflo type (increased turbulence for better...
2011 | 300049056 | TETRA PAK
More information
Washing plant. Complete line for washing, drying and remove fluff and dust Materials: PP/LPDPE/HDPE Capacity: up to 2 tones/hour, depending of material The clean output material is dry (humidity below 4% for rigid plastic (PP, HDPE) and humidity below 6% for LDPE p...
2021 | 300049076 | INAN PLASTIK
More information
Injection moulding machine for PET preforms. Niigon NPET 300 E120/ P120 IMM for PET preforms from year 2019 Only machine, does not include auxiliaries and mold In very good condition and available immediately!...
2019 | 300049053 | NIIGON
More information
Single screw repelletizing line. Complete line for HDPE recycling up to 350 kgh - Single screw extruder KRAUSS MAFFEI KME 1-90-30B - Screen changer - Spaghetti die face - Cutting unit Jiangsu FBP 160 year 2021...
1987 | 300049093 | KRAUSS MAFFEI
More information
Extrusion line for PVC profiles. Complete PVC single screw extruder line for blinds - Single screw extruder AMUT diam. 60 LD 25 year 1970 with NEW flange for screen changer and Electrical cabinet with new resistors and thermopar. no manuals - Calibration table year 1970 with Travan...
| 300049091 | AMUT
More information
Extrusion Blow Moulding machines up to 2 L . Number 2 TECHNE ADV4-700-A equipped with 6-layer extrusion head for HDPE, 6x4 cavities, 100.0 mm center distance, with aseptic blowing system, composed of Extrusion group: No. 1 extruder diameter 90 mm for the external layer + white master batch N...
2013 | 300049092 | TECHNE
More information
Extrusion Blow Moulding machines up to 10L. includes exit and low conveyors...
2003 | 300049094 | UNILOY
More information
Pellet drier. Raw material: PET pellets. Crystallisation and drying time: ~2.2 hours. Temperature control range: ＜80–180 oC. Final output: 1000 kg/h, continuous production, connected after a 1-tonne pelletising machine. Equipment list No. Name Specification/Mode...
2023 | 300049096 | ACERETECH
More information
Tetra Pak Filling Line. Complete Tetra Pak filling line.A3FLEX 1000 Base, year 2005 Including: - Filler A3FLEX 1000 Base, Version: 100V. Wiith VCK for 250 base - Cap applicator - Straw applicator TSA/21 0200V - Cardboard packer TCBP70, version 110 V . - Shrink wrapper -...
2005 | 300049090 | TETRA PAK
More information
Injection stretch blow moulding machines for PET bottles. Used Nissei ASB PF 3-1 BHLL Dryer and Hopper: Matsui Molds no available but it was blowing 5lt bottles machines dismantled ...
2009 | 300049119 | NISSEI ASB
More information
Other carton filling machine. Used ultra clean carton filling machine Elopak Shikoku USC 120 from year 1997 Made in Japan Product: Milk Screw capper included The machine is installed but not in use. ...
1997 | 300049126 | ELOPAK
More information
Label flexo printing machines. 24-inch repeat both die and print Waste wind up DC Motor main Drive 5 Colour UV Turnbar 2 x die stations...
1992 | 300049132 | MARK ANDY
More information
Shrink Wrapper for PET bottles. Krones Variopac 459 Packer year 2005 Barrel Shrink wrapper only No trays are used 28-30 cases per minute The formats used on the machine are 6x4 and 4x3 Size: External Diameter-330 ml-54 MM -400 ml-66 mm ...
2005 | 300049145 | KRONES
More information
CNC machining centers. Cube dimensions: 2200x1000x580mm 2 Tables Servo Travel distances of individual axes X-axis 20000-1500000 Y-axis 2000-2645000 Z-axis 79000-2000 A-axis 10800000- 10800000 B-axis 10800000- 10800000 U-axis 2000- 1500000...
1996 | 300049075 | HUBER & GRIMME
More information
Coextrusion lines. 7 layers blown film line Gravimetric dosing unit, single components for extruders C,D and E; 1+2 for extruders A,B,F and G 7 Extruders Varex 50.30D Blown film die type B160/315-MC-8, gap 1,25/2,25, die plate installed 315 mm Multicool air ring Opti...
2008 | 300049180 | WINDMÖLLER & HÖLSCHER
More information
Independent Rewind Stations Film Slitter-Rewinder. Web materials: CPP Plain & Metalized film (20-80 microns) Min. Web width: 2000 mm Slitting width: Max. 3 cuts Machine design speed: max. 700 m/min Unwinding direction: Upward and Downward Unwinding tension: 5-50 Kg/m Rewinding tension: 2-50 Kg/m Cont...
2012 | 300049169 | PNT
More information
Washing plant drier. Removes water from flakes (ground film) in washing plants by squeezing action. Good drying results observed also in PE-PP pulverized materials Engine screw diam. 400 mm. Moisture input 40%, output 5% to 6% Output depends on the material. ...
2013 | 300049184 | TECNOFER
More information
Bi-Injection moulding machine. Used materials: PC/PMMA Final Product: Transparent covers Control System: Electronic CC200 Handling:Viper 50RC , 2014 Operating hours in full automation on 25/09/2025: 3638 h Additionally with 2nd injection unit 740 DM55mm Nozzle Contact Force (M...
2014 | 300049034 | ENGEL
More information
Injection molding machine up to 250 T . Turning table Diam. 1200 mm nº stations 2 Dimension mould platen 380x480 mm Available a similar machine from 2015 (price upon request)...
2007 | 300049188 | BM BIRAGHI
More information
Separators and centrifuges. Milk and whey separator Alfa Laval, year 2012 Capacity: 16.000 l/h Milk: Cold mode: temperature: 8-10 gr. C Whey: Hot mode: temperature: 40-42 gr. C Bowl tools availlable. Machiine installed but out of use....
2012 | 300049202 | ALFA LAVAL
More information
Stretch blow moulding machines. Side TMS 2004e stretch blowing machine Bottle size: 250ml - 2.500ml Max diam: 110mm Max height: 350mm It includes: - Preform hopper - Elevator - Chiller for cooling machine / mold...
2003 | 300034164 | SIDE
More information
Air Compressors (Low Pressure). Output 5620 l/min Power 30 kW Rated speed 1500 1/min...
2011 | 300035563 | MATTEI
More information
Winder for extruded film. Automatic rewinder that has been working only 3 years Width 3000 mm, usefull 2700 mm Diam MAx reels 1000 mm Speed 5-50 mt/min 2 shafts availabe 5'' (possible to use shaft from 3'' to 6'')...
2009 | 300036349 | BANDERA
More information
Stretch blow moulding machines. Krones Contiform S14 stretch blowing machine Output: 21.000 bph for CSD, 25.200 bph for non-CSD Hours worked: 44.872 It includes: - MDK preform auto loader, from 2006 - Air conveyor (50m) from 2006 Machine Available Immediately...
2006 | 300037132 | KRONES
More information
Thermoformer. Punching press and thermoforming machine t2 for PP/PET eggs trays (mould not available) Punching press Max widh material 640 mm Cutting dimensions 640x340 mm Depth of draw 120 mm 20-80 cycles min Clamping force 10000 kg Thermoforming machine Mater...
1999 | 300037197 | T2
More information
Twin-screw extruder for PVC. engine D.C. 23 kW -the temperature zone on the cylinder-6 zone - temperature zones in tool -4 zone 36 000 working hours...
2000 | 300037850 | WIRKBAU
More information
Thermoformer. Materials PP-HIPS Preheater Min mould area 480x220 mm Clamping force 400.000N Mechanical cycles /min max 35...
2005 | 300038166 | RIGO
More information
Thermoformer. Max. Forming Area:1500x1000 mm Material: ABS, PST, PC, HDPE, PMMA Film depth positive and negative:600mm Material Thickness: min 1 mm - max 10 mm Movement: pneumatic Power installed: 65 Kw Power Ceramic heater: superior and inferior 650 Kw, central 4...
2000 | 300038386 | VILLA
More information
Thermoformer. Thermoforming area: 3000 x 2000 mm Depth of draw: 500 mm Material: ABS, PP,PE,PET,PMMA,PC,PS Material thickness: min 2 mm - max 12 mm Movement looking sheet: hydraulic + bolt Movement upper and lower lamps : pneumatic Movement table: hydraulic Moveme...
1996 | 300038403 | ATEM
More information
Moulds. Year of production: 2008-2012 Almost new, used only for test ONLY CALIBRATION TOOLING without table...
| 300038716 | MEWEKA
More information
8 Colours CI Flexo Printing Machines. Web Width 950 mm (Film width to 950 mm is possible) Printing Width 900 mm Repeat of design, 280 mm - 650 mm printing sleeves for 1.14. plates (more the 150 sleeves) printing sleeves for 2.54 plates (approx 50 cylinders) corona, slit, automatic win...
2003 | 300039190 | FLEXOTECNICA
More information
CNC machining centers. Siemens840 C controller...
1993 | 300038371 | GEISS
More information
Palletizer for cans. Sentry case palletizer unit for cans from 2013 Rated at 80cases/m Model 700 Several patterns programmed patterns Dismantlled and available immediately! ...
2013 | 300039503 | SENTRY
More information
PET labelling machine. Trine 650 roll-fed from 2002 Disconnected and available immediately! ...
2002 | 300039559 | TRINE
More information
Homogenizer. Homogenizer Tetra Pak ALH30, year 1994 2 stages, has 70mm pistons, max pressure 160 Bar Hydraulic unit upgrade done in 2002 Crankcase complete was changed in Feb 2010 Capacity16,500 liters per hour with the existing motor of 110kW. Can reach lower...
1994 | 300039721 | TETRA PAK
More information
Twin-screw extruder for PE/PP compounds. Complete line for compounding LEISTRITZ ZSE 50GL (4 component dosing system included) Screen changer: BKG Underwater granulator: BKG MASTER A 300 (2002) BKG Dryer injector Single temperature control unit ST 150 Motor power: 54 kW...
2001 | 300039914 | LEISTRITZ
More information
Cup printing machines. 6 colors Length of stripper bar : 167mm Length of image : 370mm max Print diameter : 115 mm max Cup rim diameter : 135mm max Height of cup : 150mm max Mechanical speed : 350 cpm (max) Uv drying Corona treatment Softal Spare parts included : see pic...
1994 | 300040027 | VAN DAM
More information
Tetra Pak Filling Line. Complete Tetra Pak filling line TBA9 200B from 1995. Including: 1. Filler TBA9 200 Base 2. Straw applicator TSA46 3. Tetra Tray Packer 4. Conveyors: arround 25 meters. The line is still installed! ...
1995 | 300040911 | TETRA PAK
More information
Injection moulding machine for food and beverages caps. Complete plant for spirits (vodka, brandy, wiskey) closures from year 2012 The plant inlcudes: - Assembly unit GEFIT for closures, 10.000 caps/hour - Printing units: DELSA, MADAG, MOSS - IMM Negri Bossi CANBIO 330 - 2 units and CANBIO 220 – 1 u...
2012 | 300040906 | GEFIT
More information
Bottle inspector. Bottle Inspector PONNDORF from 1999 Can inspect residual liquid, HF lye, ground control, bottle neck control For bottles : Diameter 50 to 100 mm Height 150 to 360 mm There are some spare parts vailable Format sets for the following bottles: 1,0...
1999 | 300040863 | PONNDORF
More information
Stretch film extrusion line. 4 extruders 5 layers ABCBD cast film line for stretch wrap films. Extruder A 88.9 mm 272 kg/ , 2 gravimetric dosing unit Maguire, hydraulic screen changer Extruder B 114.3 mm 545 kg/h, 4 gravimetric dosing unit Maguire, hydraulic screen changer Ext...
2006 | 300041201 | BLACK CLAWSON
More information
Tubes printing machines. MOSS MO3000-12: 3 colors automatic offset machine for printing on cylindrical and conical containers With UV drying unit for lacquering Output: 1200-6000 pcs/h according to machine equipment Moss MP12: 12-station rotating turret with indexing mov...
2001 | 300041258 | MOSS
More information
Extrusion line for drip irrigation. Complete line for the production of drip irrigation flat tape - labyrinth type Single screw extruder Tower with strip forming tool Vacuum tank Cooling tank Haull off Winder double station The line is high speed and has a diameter adjustment by laser ...
2011 | 300041446 | EUROTECNO
More information
Labelling machine for glass bottles. Labelling machine for glass bottles KRONIMPLANTI from 1992 Type of bottles: 0,75L (champagne, vine) Capacity 3000 b/h For front, back and neck label Machine is in good condition, can be inspected in dry cycle and available immediately! ...
1992 | 300041561 | KRONIMPLANTI
More information
Thermoformer. 4-s linear thermoforming vertical machine Processed material - Plastic tape as a roll (PS) Finished product-Thermoformed plastic bottles Productivity - 6000 bottles of 200ml per hour - 28 cycles / minute/ line A mould cooling device and a plastic ...
2013 | 300041603 | AGAMI
More information
Bag filling machine. Aseptic bag filling machine AsepSystem Idra 20/2 YoM: 2013 Product: milk, cream, juice Max capacity: 18.000 kg/h Bags requirement: aseptic, heat resistant (vapor), volume from 3 to 20 kg, Caps standard 1inch Elpo, heat resistant Installed and use...
2013 | 300041858 | ASEPSYSTEMS
More information
Robot. 3 axes Cross section: 3,000 mm Demoulding: 1,500 mm Vertical: 1,800 mm...
1997 | 300042158 | PIOVAN START AUTOMATION
More information
Baling press. EPS compactor Suitable for EPS dust, EPS Polystyrene fish boxes and packaging , Polypropylene (EPP) packaging, Polyurethene packaging, Polyurethene Insulation foam This machine handles 400-550 pounds (180-250kg) of EPS per hour (depending density) an...
2015 | 300042227 | GREENBANK
More information
Shredder. Pipe crusher Avian PASG 2000 Motor 2x 90kW 488 rotor knives KD21 Rotor diameter 2000mm Feeder hopper 6000x1600x1600mm PLC control Siemens Conveyor...
2015 | 300042475 | AVIAN
More information
Thermoformer. Used to produce lids for yoghurt pots Min thermoforming area 250x200 mm Max sheet width 560 mm Clamping force thermoforming and cutting station 500kN 2 stackign unit available, one traditional and one for round products...
1996 | 300042533 | KIEFEL
More information
Offset printing machines. Hours worked 12399 - cycles 60653269 Semi-rotary waterless offset machine. -Web cleaner from Kelva, -Corona treatment by Softal, -Photocell for reprocessing, -7 offset units -One Flexo unit with suction table for better paper tensioning. -Hot foil...
2006 | 300042661 | CODIMAG
More information
SIG Combibloc line. Complete Combibloc filling line CFA 406-32 Consisting of: 1. CFA 406 filler, year 2004, working hours (June 2020): 33.411 2. Berchtold CFA -tank 135l, year 2003 3. Evacuation table A+F, year 2004 4. Buffer table, year 2004 5. Cap Applicator Sig Al...
2004 | 300042667 | SIG COMBIBLOC
More information
Chemical filling lines. Liquid cream packaging machine. The brand name does not appear, as it was a machine manufactured specifically with the characteristics requested for this article, but the company that built it is MECAQUÍMICA DE LEVANTE, S.L., it was built in 1992. It...
1992 | 300042719 | HOME MADE
More information
Extrusion lines for multifilaments. Multifilaments PP FDY yarn production line Denier range: 150 - 2500 Den Tenacity: 4,5 - 4,7 gr/den average Maximum extruder capacity: 80 kg/h Screw diametr: 60 mm Number of ends: 8/4 Maximum roll diametr: 420 mm Maximum winding speed: 3500 m/min Spe...
2000 | 300042806 | TESSILMECCANICA
More information
EPS Shape Moulding Machines. EPS (Expanded polystyrene) injection forming machine for the production of EPS insulating boards (mold shape) with ship laps in 2,5m x 0,6m x 2cm to 12cm thickness. The machine dimensions are: 4m height x 5,70m length x 4,50m width....
2004 | 300043033 | KURTZ
More information
Double-shaft film slitter-rewinders. Slitter rewinder with automatic reels change Unwinder SV 2.10 F with costant tension, hidraulic lift of the reels, Pneumatic brakes Double automatic rewinder with automatic change of the reels Diam shafts 76 and 152 mm Web Guide AEG-BST...
1995 | 300043172 | EUROMAC
More information
Wicket bag making machine. Bag width:150 - 420 mm Bag length :160 - 600 mm Bottom gusset: 30 – 80 mm Electrostatical loading on reels should not exceed 4 kV Film thickness: LDPE: 2x 0,025 – 0,060 mm HDPE: 2x 0,018 – 0,030 mm LLDPE: 2x 0,025 – 0,060 mm Film Unwinding, ma...
2014 | 300040532 | CONTEC
More information
Other carton filling machine. Gable top carton filling machine Nimco 650- TR Format 1/2 liter and 1 liter Cross section: 70mm x 70mm, Package B There is NO cap Capacity ± 3000- 2400 p/h....
2002 | 300043466 | NIMCO
More information
Sleever for PET bottles. Used FINPAC SHM 2B sleever from 2006 Speed: 9000 bph Machine hours: 2500 hours Formats: 0.1 - 1.5 L Manuals:Yes Rotation direction: Linear Spare parts included Can be shown in dry cycle ...
2006 | 300042085 | FINPAC
More information
Bag filling machine. Aseptic bag filling machine THIMONNIER Model: THP 7300 Manufacture year: 2012 The scope of supply includes the fiiller and two tanks for washing and peroxide treatment. Product: milk, fruit juices, uht cream. Bag volume : 100 - 1.000 ml Capacit...
2012 | 300042370 | THIMONNIER
More information
Other Machines for Drinks. Used Erca PET cup form seal machine from 2007 Model EF320L Hours worked approx. 30.000 Includes AF Packer Was filling still water Formats 100, 125, 200, 250 ml Output 18.000 cups/hour at 100 and 125 ml 14.400 cups / hour at 200 and 250 ml 24, 3...
2007 | 300043810 | ERCA
More information
Stretch film extrusion line. 4 extruders for automatic and manual stretch film (the line has always produced automatic) Automatic head CLOEREN 2400 mm, useful 2000 mm Thickness control ELECTRONIC SYSTEM with beta rays Materials: LLDPE / LDPE Thicknesses: 15-35 micron Chill r...
2001 | 300043897 | NEXTROM
More information
Pipe belling and socketing machine. Tooling 68 mm...
2018 | 300043922 | SICA
More information
Single-screw extruder for PVC. Extrudex ED 50 GL Material: PVC Total working hours: 46,000 2010: they changed the 33kw DC motor and replaced it with an 11kw AC motor and a frequency converter. 2016: they changed the screw and barrel (Extrudex) With the new screw and barrel 11 000...
1990 | 300043950 | EXTRUDEX
More information
Twin-screw extruder for PVC. Output capacity: 230-250 kg/h Main drive power: 60,4 kW DC motor...
2000 | 300044029 | KRAUSS MAFFEI
More information
Die head for tubes. Three layers die head for production of co-extruded PE100 RC pipes Complete with heaters and spare heaters Working hours: 8448 h SDR 33; 26; 21; 17; 13.6; 11; 9; 7.4 Outside layer: 10-20% Middle layer: 60-80% Inside layer: 10-20% Tolerance of the lay...
2020 | 300044211 | LIANSU
More information
Mounter proofer. Plate mounter machine for sleeves with 1200 mm lenght Width sleeves 1300 mm 2 cameras high resolution Inner diameter of the sleeve 86.06 mm. ...
2004 | 300044221 | SYSTEC
More information
6 Colours CI Flexo Printing Machines. Solvent or water based inks Max. mechanical speed: up to 250m/min Printing material: PE, PP, OPP, PET, PAPER Unwind type : Double support, electric brakes, 76mm roller, Dancing roller Max. unwind roll diameter : 800mm Max. winding diameter: 800 mm W...
1994 | 300044262 | CMF
More information
Other Machines. 2x Promak pantographs for cutting and milling composite panels General features F3A-COMPACT Numerical Control: OSAI 110 can be ordered model 510 Win Media Type NC (Numerical Control) Digital Electrospindle power: 4 kW - 5,5 kW(Standard) - 8 kW Elect...
2008 | 300044287 | PROMAK
More information
Label sheeter - cross cutting. Semi - rotary die cut machine with module for UV varnish applications Speed: 50 /min Unwind capacity: 760 mm Web width: 330 mm Repeat size: 203 mm- 406 mm Lamination Semi rotary die cutting (Z-144) Slit module without knives Dual rewind 610 mm Grap...
2009 | 300044278 | DURST
More information
Thermoformer. Max. sheet width: 1100mm Nº & type of heaters: 27+18 Quartz Power of each heater: 200/400W Regulation of heating elements: Yes Sheet thickness : owner only produced with 3-6,5mm Photocell sagging control Pneumatic plug assist Heating, forming and cut...
1995 | 300044302 | GEISS
More information
Complete filling line for fountain water (19 L). CapSnap- 5 gallon 1 head filler WASHER: •Programable Logic Controller Human-upgraded by SnapCap 8 years ago •Manual load (Automatic available for 550+ BPH) •Separate recirculated wash, recirculated rinse, sanitizer and final rinse cycles •3 HP was...
1997 | 300044441 | CAPSNAP
More information
Bi-axial film extrusion and stretching line. Extrusion BOPS line composed by 6 silos for feeding material Gravimetric dosing unit 4 components Spiroflux Kuhne extruder Model “800 34:1 W/C EXT Continuous screen changer Hi Tech Melt pump and Automatic Die Farcom Calender MDO TDO Scantech thickne...
1999 | 300044459 | DMT
More information
Single screw repelletizing line. Material that can be processed: PE, PP, Extruder hopper type: Agglomerator/Cutter Compactor Extruder motor: 75 kW Cutter-compactor motor: 55 kW Centrifuge Cyclone Vacuum pump Big bag loading station Feeding silo...
2006 | 300044510 | KWEEN B
More information
Injection molding machine up to 250 T . Hybrid machine Working hours: 74500 (16.11.2022)...
2001 | 300044535 | DEMAG
More information
Aseptic filler for drums and bins. Aseptic bag filler Rossi & Catelli model SPU/2T Dimensions: W: 6 m L: 5.5 m H: 3.5 m For bags from 200l to 1000 l Capacity: up to 10 tons per hour (depends on the pasteurizer connected to the filling machine) Product: Tomato paste The filler...
1993 | 300042271 | ROSSI & CATELLI
More information
Carton erecting machine. Tray erector Ampack Ammann, Type SH 6 Original year not known. Refurbished officially by the manufacturer in 2002 For cups diam. 75mm. Cofiguration 4x5 Capacity: 20.000 u/h Machine installed, but out of use....
| 300044580 | AMPACK AMMANN
More information
Bottom weld bags on the roll. Line for the production on 2 or 3 tracks of pre-cut bottom welded bags for tearing. Packing: rolls with paper tape. Special system of film movement to obtain a perfect sealing. Projected even for very thin film. Automatic winding unit with 6 mandrel...
2007 | 300044599 | MOBERT
More information
Injection molding machine from 250 T up to 500 T . Hybrid machine Good working condition Robot no included Without additional accessories Working hours: 59 102 (12.08.22)....
2012 | 300044624 | ARBURG
More information
Accumulation Head Extrusion blow moulding machine. Equipped with MOOG wall thickness control and accumulation head Screw diameter: 90 mm WK130 torpedo extrusion head with pre-accumulator Deflashing Unloading station and robot included This machine can produce 100 bottles per hour Optional (price on...
2009 | 300044683 | UNILOY
More information
Thermoformer. Maximum dry cycles/minute: 50...
2007 | 300044797 | GN
More information
Bi-Injection moulding machine. Machine completely refurbished in 2012; refurbishment report available. New inverters and motors; new pumps, Hydraulic motors and reductors changed, New MOOG PLC. Electrical cabinets and cables have been changed with new ones. -Robot Dal Maschio I...
1990 | 300044863 | ITALTECH
More information
Butter equipment. Butter packaging line Trepko PMG4 Including: 1. Butter packing machine Trepko PMG 4, briks 200/250 gr. in aluminum foil. Capacity: 100 to 180 p/min 2. Carton packer Trepko 710W, max output 20 box/min. Box dimensions: min. 200x105x70 m...
2010 | 300043657 | TREPKO
More information
Blister and Skin. It has been used with the following films: Bottom film Width: 315 mm Thickness: 350 µm Top film/cover film Width: 300 mm Thickness: 112 µm Feeding system Roll fed Depth of draw positive/negative 65mm/65mm Cycles / min: 20 Closing force: 20 kN ...
2004 | 300045067 | ILLIG
More information
Injection moulding machine for PET preforms. Injection moulding machine MIR 280-2-520, year 2003 Two extruder type For preforms type OIL, 29 NECK, 28-30 grams Included: Robot GEFIT Eurochiller EF C180 PET, three input water, inner circulation Dryer PET Plastic Systems DR 106 HT/H 1500 PET H...
2003 | 300044766 | MIR
More information
Preheaters. Max film width: 610 mm Maximum foil thickness: 2.0 mm Heating roller: 35.4 kW Air heater: 4 kW Max speed: 35 m / min. Max Heat temperature: 140 ° C ...
2008 | 300045111 | ILLIG
More information
Other Machines. Hydraulic pipe and profile bending machine Description: three drive rollers two pressure rollers controlled separately (allows for smaller radii, and gives the convenience of working with the possibility of feeding material from the infeed table) r...
1997 | 300045194 | AMOB
More information
Complete filling lines for carbonated drinks. PET bottle filling line from 2004 for CSD Also suitable for still soft drinks, alcoholic drinks Includes the following: - PET blow molding machine Kosme KSB 4L, year 2004 Output: 6.800 bph - 0,5L 6.000 bph - 2L 5200 bp...
2004 | 300045243 | KOSME
More information
Extrusion Blow Moulding machines up to 10L. POSSIBILITY OF DOUBLE HEAD CD 150mm (ask for price) Stroke: 500 mm...
2006 | 300045274 | PLASTIBLOW
More information
Extrusion lines for cables. Extrusion line for plasticized PVC - For agricultural wire, plasticized iron wire, thin electrical wire (single phase) Line 1 complete with (Pay off passive block and up spool Hydraulic oil) - Extruder bandera 30/25 - 2 screws 1 PVC 1 polyphenyl -...
1990 | 300045285 | BANDERA
More information
Washing-rinsing machine. Sentry Racetrack Rinser-2013 Gripper style rinser Water or air rinser 60 bph All stainless steel construction It ran both single serve bottles and gallon jugs Still set up but cannot be seen running Operator Friendly Lateral Adjustment fo...
2013 | 300045351 | SENTRY
More information
Flexo printing machines in line. Printing possibilities of 4+0,2+2, 3+1 Mechanical speed 130 mt/min...
2009 | 300045389 | RAFLEX
More information
8 Colours CI Flexo Printing Machines. Turret automatic rewinder, diam max reels 800 mm Videocamera Eltromat Web guides E&L before and after the printing unit 8 pumps Anilox 5x 290 /5,5 2x 100/17 1x 120/10 1x 100/10 Sleeves 16x 340 mm 8x 360 mm 8x 390 mm 8x 400 mm 8x 420 mm 8x 460 mm 8...
2002 | 300045425 | BIELLONI
More information
Pipe belling and socketing machine. SICA belling machine: BA CA 1T 100-500 year: 1983 Oven tooling - diameters: 160; 200; 250; 315; 400; 500. Belling tooling No. 1 complete mould diameter 315x5 for smooth sockets; no. 1 complete mould diameter 315xSN2 for sockets with O-ring seat; n...
1983 | 300045451 | SICA
More information
Slitter-rewinders for Adhesive Tapes. Machine was produced in 1985 but Ghezzi renovated completely the machine in 1999 and sold it again It is good for cutting all sorts of packaging and masking tapes. Slitter in noise-proof cabin No corona or packaging line included Maximum production s...
1985 | 300045458 | GHEZZI & ANNONI
More information
Rotary compression moulding press. Laser Printing machine TAMPOPRINT (2008) Output 100.000 caps/h Laser printing for caps. It was part of SACMI press The printer is in good condition and available immediately! ...
2008 | 300038698 | TAMPOPRINT
More information
Grinder - Granulator. Rotor speed: 520 rpm Capacity : 1500-2000 Kg (1500kg/h on HDPE) 7 rotor blades 2 fixed blades Motor power : 132 kW Densifier Costarelli/Mariotti diameter 1200mm - 400kw to be sold separately...
2002 | 300045515 | INAN PLASTIK
More information
Label flexo printing machines. GEW UV Speed 225m/min. 7 Color Printing Unit 3 Magnetic Cutting Units 1 Unwinder / 2 Rewinder Delam/Relam Unit Bst Camera Aniloxes used; 4 pcs 1300lpi-2.80cm3 3 pcs 1300lpi-3.50cm3 1pc 1000lpi-1.88bcm 1pc 1000lpi-2.03bcm 1 pc 1000lpi-2.0...
2003 | 300045657 | COMCO
More information
Skeletal granulators. Sheet material 1-2mm Electrical requirements: 3 Phase / 32A Output capacity kg/h : 50-800kg/h Input throat width : 900mm Input throat height : 1500mm...
2015 | 300045663 | ADLER-BUZZI
More information
T-Shirt bags on the roll. Bag width 1 lane 160-600 mm 2 lanes 2x 160/ 2x 295 mm Max roll diam 150 mm Processable thicknesses from 10 my...
1997 | 300045666 | ROLLOMATIC
More information
Compression moulding press for rubber. FONMAR VULCANIZING RUBBER PRESS FOR RUBBER CONVEYOR BELTS. MODEL AL-20-NE 1600X1400 - YEAR 2020...
2020 | 300045684 | FONMAR
More information
Other Machines for Drinks. Water treatment by particle filtration Prominent from 2011 Model EL-110602-E1 Useful volume: 8000 L Tank dimensions: 2000 x 2700 mm Max. transfer temperature 30ºC Max. fill rate 2550 mm Max filling speed 10,0 m3/h Transfer pressure: atmospheric Den...
2011 | 300045688 | PROMINENT
More information
Injection molding machine up to 250 T . 2 units 2013 available, price per unit 1 unit 2010 available, ask for price. ...
2013 | 300045707 | ENGEL
More information
Injection moulding machine for PET preforms. Used injection molding machine for preforms Brand: Sacmi Made by Oima in Italy Model: Stratos SL 3300 180 Year: 2009 Dryer: Plastic Systems D808 HT Hopper: Plastic Systems H2000 Mold Dehumidifier Plastic Systems DL 2400 Mezzanine Molds available...
2009 | 300045728 | SACMI
More information
Injection molding machine up to 250 T . ...
2001 | 300045740 | NETSTAL
More information
Thermoformer. Manual Feeding Power of each heater: 2 x 70 kW Regulation of heaters: Yes Photo Cell Control no Control: pneumatic...
1995 | 300045738 | GEISS
More information
Other Machines. Complete toast making line Capacity: 2000 pieces per hour Includes the following: 4 packaging and cutting machines for 4 toast formats, manufacturer Brevetti Gasparin 4 complete trays Mixer, manufacturer Tweedy Partial and circular knitting...
| 300045774 | WINKLER
More information
Other carton filling machine. Carton hot filling machine Nimco 450 TR, year 1997 Capacity: 1200-1500 p/h Product: Juice Package cross section: 95x95mm Working hours: approx. 6000 With ultra sonic screw cap applicator Telesonic (Switzerland) and automatic cap feeder installe...
1997 | 300045852 | NIMCO
More information
Single screw repelletizing line. Materials processed: HDPE and LDPE Origin of materials processed: Internal Scrap Reel feeder...
1996 | 300045873 | MUNCHY
More information
Stretch blow moulding machines. Side TMS 2004e reheat stretch blow molder, year 2014 Output: 5.600 bph Short neck PCO 1881 Includes: - Mould PCO 1881 - Dryer - Dehumidifier - Chiller - Hopper - Dumper - Preform loader - Spare parts - Technical documents It is currently dismant...
2014 | 300045922 | SIDE
More information
Thermoformer. Only 2640 Working hours The machine has an automatic changeover function, upper punch with pneumatic drive, mould table with pneumatic drive and position storage. Electric heating, individual heating pattern is stored, energy-saving mode during work...
2008 | 300045934 | ILLIG
More information
Cast coextrusion lines. Cpp line with 4 extruders and 5 layers Extruders:1x 150/30D (with melt pump), 1x 90/30D, 2 x 70/30D DC Motor for extruders Feed Block CLOEREN 5 layers Die CLOEREN Width 3000 mm Vacuum Box 2 chambers Chill Roll Primary 1 x 1000 mm diameter Second...
2007 | 300045976 | WINDMÖLLER & HÖLSCHER
More information
Single-screw extruder for PE/PP. Extruder Theysohn single screw Material PE Screw and barrel year 2020; less than 3000 hours working hours...
1996 | 300045991 | THEYSOHN
More information
Injection molding machine up to 250 T . Includes Robot Sepro...
2003 | 300045996 | KRAUSS MAFFEI
More information
Silos. 18 m3...
2002 | 300046000 | TRIMEC
More information
Complete glass filling lines. Krones Modufil Bottling line from 2012 Unused and not Installed Ready to load 200 BPM 12oz and 22oz change parts. Includes: -MODULJET RInser -MODULFILL HRS FIller -Allen Bradly control panel -Crowner -Checkmat Inspection machine -UNIVERSE...
2012 | 300045993 | KRONES
More information
Surface pretreatment equipment. Plasma System OPENAIR 01 1 pcs FG5001 Plasma generator, digital 1KVA 02 1 pcs DVE10 Air management module 03 1 pcs HTR22 Plasma high-voltage transformer, double and movable 04 2 pcs PFW10 Openair® Universal Plasmajet 05 1 pcs LCM2 Dual-channel plasm...
2017 | 300046063 | PLASMATREAT
More information
Wrap Around case packers. Used wrap around case packer - Pick and Place Packer Cermex E478 - Case Erector Carmex F387.40 Speed 40 c/min - Automatic Cse Gluer Cermex C6 Machine dismantled and available immediately! ...
2008 | 300046079 | SIDEL
More information
Coextrusion lines. 3 extruders 2x35mm LD 30 and 1x 50 mm LD 30 Manual screen changer Die head ACH3/R with 2 die plates, 100 and 200 mm with external bubble cooling Calibration basket 1200 8-6/ CS Haul off TPE 1200 Double automatic rewinder BPE 1200/2 Tower Thickness 2...
2000 | 300046106 | BANDERA
More information
Complete Non-carbonated Filling Line for drinks. FILLING LINE FOR PET BOTTLES 500ML FOR JUICE STM 2014 Capacity 4000 bph Includes: 1.TRIBLOK ARROW PET 9/9/3 NC9 SCRUBBER (9 GRIPPERS) , NEPFILLER (9 POURERS), CAPPER (3 HEADS) – STM 2018 2.1000L BUFFER TANK – STM 2018 3.CIRCULATING TANK 80L– STM...
2014 | 300046093 | STM
More information
Extrusion line for corrugated pipes. Moulds and equipment only for 63 mm diameter available EXTRUSION LINE: No. 1 Master single-screw extruder Model: PROTON 60-28 G Year: 1997 Complete with colour dosing unit (Engine plast mod DMX 25/1+1) No. 1 Slave single-screw extruder Model: UNI...
1995 | 300027641 | CORMA
More information
8 Colours CI Flexo Printing Machines. Solvent inks Speed up to 300 mt/min Viscosimeter Gama Web guide before and after the printing unit Lel System Video BST GENIUS Turret unwinder and rewinder, diam max reel 800 mm Sleeves 341x 8 360x 8 380x 8 384x 8 400x 8 420x 8 430x 8 440x 8 460x ...
2004 | 300046215 | FLEXOTECNICA
More information
Extrusion line for PE/PP pipes. Complete line Setup in 4 x 40' double ended shipping containers for on-site extrusion. The line has been refurbished during container setup 2 x INOEX Savomat Gravimetics material input control system Single screw extruder KS machinery - SJ90/33 wi...
2012 | 300046283 | SICA
More information
Other Machines. Centrifugal extractor Pieralisi jumbo 3 It is widely used in the olive campaign for oil. In this case, it was used to dehydrate the sludge. PIERALISI JUMBO 3 The centrifugal extractors of the JUMBO Series are able to offer solutions to any technolog...
2013 | 300046334 | PIERALISI
More information
Single screw repelletizing line. It is an edge trim extraction + regranulation line. Sell since only used 10hours Output 10-50kg/h Water cooled...
2019 | 300046370 | EREMA
More information
Cup Fill & Seal machines. Rotary automatic cup fill and seal machine ABL Cups diameter 95 mm Capacity: Up to 3000 cups per hour Products Liquid /Semi Liquid Product filling temperature Up to 80’C Cup material Plastic cups Sealing ( Pre-cut ) Foil/Plastic Snap on cup Plasti...
2020 | 300046436 | ABL
More information
Bottom weld flat bag making machine. Welding machine with: ·side sealing bar ·bottom sealing bar Materiales: BOPP, LDPE, CPP, DUPLEX (PP/PE, CPP/CPP, BOPP/PE, PET/PE) Mother roll width: 1200 mm Mother roll diameter: 800 mm Bag width: min. 80 mm; max. 1100 mm Film thickness: min. 15 my W...
1998 | 300046511 | SCAE
More information
Injection molding machine from 250 T up to 500 T . Pump motor nominal capacity: 55 kW Installed heating power: 30 kW...
2001 | 300046513 | KRAUSS MAFFEI
More information
Single-screw extruder for PE/PP. Working hours 56.020 Motor DC...
1998 | 300046515 | CINCINNATI EXTRUSION
More information
Rotary compression moulding press. ROTOPRINT RTI 2000 Automatic 3 colour tampoprinter Capacity 750 units/min Available immediately! ...
2001 | 300046288 | TAMPOPRINT
More information
Thermoformer. Vacuumforming machine Type of control: manual Materials: PET-G, Polycarbonat, acrilic, PVC, ABS, etc, Sheet size: 1500 x 2000 mm Maximum size to form: 1300 mm x 1800 mm (depending on used material and mould)\ Heating elements: Ceramicx Full Trough El...
2017 | 300046544 | THE CHANNELLETTER FORMER
More information
Injection molding machine from 250 T up to 500 T . Includes: Robot ERC 53/1-EA...
2000 | 300046601 | ENGEL
More information
Other Machines. Available Gas boiler for hot water 400 kW (listed price for each item) For sale also two hot water inox containers 10m3 each (price on request)...
2009 | 300046615 | VIESMANN
More information
Twin-screw extruder for PVC. Motor power 68 kW...
1998 | 300046621 | CINCINNATI EXTRUSION
More information
Other Machines. Operation principle: cut the reeled liner materials into specified size and simultaneously insert the precut liner into the cap; finally, the liner pressing unit press the liner to the bottom of the cap. This is the whole process of simultaneous line...
2011 | 300046625 | RUIAN FURI
More information
Winder for flexibles tubes and profiles. included two tube guides for Ø16 and Ø20 (picture attached)...
2013 | 300046638 | MAZZONI
More information
Beer filling. Complete Brewery - Beer Bottling line Brand: Eurostar (made in Italy) Model: MEC ISO DPS 12/1C Year 2015 production: 2000 bph - Malt preparation: Mill 250 kg/h Pallet with Three tanks made of stainless steel copper coated Mash tun/b...
2015 | 300046633 | EURO STAR
More information
T-Shirt bags on the roll. Fully automatic high speed T-shirt bag / Vegetable bag On-Roll making machine with hot slitting and side gusseting system Bag width: 180 - 330 mm Film thickness: 0,008 - 0,035 mm Production speed (max): 200 pcs / min/line Jumbo roll: with - 1130 mm ...
2020 | 300046636 | COSMO
More information
Bottom weld bags on the roll. Materials: LDPE, HDPE Thickness: 15-85 my Gusseting station Web guide Mother roll diameter: 1100 mm...
1991 | 300046659 | ROLLOMATIC
More information
Injection molding machine up to 250 T . Machine dismantled used materials: PP Number of core pulls: 4x hydr. + 2x pneumatic Final product: caps Clamping force: 200t Control type: mosaic screw diameter: 45/40 mm working hours: 34875 h CE certified Machine manuals available Robot: NO (EM 67...
2013 | 300046705 | FERROMATIK MILACRON
More information
PET labelling machine. Used labeller for self-adhesive labels Brand: PE Labellers Model: Modular SL 576-6-SM-4P Year: 2020 Working Hours: 362 Self adhesive labels - one label head Machine used for a short period of time because the project was cancelled machine dismantl...
2020 | 300046710 | PE LABELLERS
More information
Double-shaft film slitter-rewinders. Max working width: 1000m Max web width: 1050m Max working speed: 400 m/min Max unwinding reel diameter: 800mm Internal spindle diameter 76mm Max rewinding reel diameter: 500mm Shaft diameter: 50mm Internal spindle diameter 76mm Knife Type: Cutter +...
1997 | 300046728 | SCHIAVI
More information
Other Machines. 1. Solar cell production line System 70MW/35 MW solar cell production line (< 1 worker per MW). Specifications + Wafer sorting 70 MW + Texturization, PSG removal and AR coating 70 MW + Diffusion, metallization, laser and cell tester 35 MW Ot...
2008 | 300046734 | ROTH&RAU
More information
CNC machining centers. Geiss CNC milling machine LIN 2000 x 1000 Travel / Speed / Acceleration X-axis: 2450mm, 120000mm/min, 7500mm/s2 Y-axis: 1400mm, 120000mm/min, 7500mm/s2 Z-axis: 800mm, 60000mm/min, 1200mm/s2 B-axis: 210º , 14275 º/min, 1200 /s2 C-axis: 520º, 1800 º/...
2001 | 300046713 | GEISS
More information
Cheese equipment. Cheese equipment - DIMA Compact 200 Curd cutting, cooking-stretching and moulding of any kind of pasta filata stretched cheese like mozzarella,provolone, sacamorza, chechil, suluguni. Productivity up to 200 kg per hour. Completely refurbished in 2...
2012 | 300046693 | DIMA
More information
Compression moulding moulds. SACMI mold set 28 mm CSD 12 Year 2014 HDPE neck 28 mm carbonated soft drinks Mold very rarely used and assessment done by SACMI Immediately available...
2014 | 300046772 | SACMI
More information
Open mixer for rubber. Automatic line for mixing & granulating raw rubber Composition: 1. Mixer: 90 L Production: 800 kg/h 2. Calender with automatic discharge diam. 650 mm x length 1400 mm 3. Cutting unit: from 2 mm to 2 cm...
1974 | 300046818 | COMERIO
More information
Tomato processing factory. TOMATO EVAPORATOR FENCO FT-312 Complete with PLC control cabinet, valves, pumps, level sensors, thermostat etc ...
2005 | 300046789 | FENCO
More information
Cans filler and capper. Used can filler KHS (SEN) 32 / 6 FERRUM TYP 308G Capacity: Up to 15.000 cans/h Year of production: Filler and Seamer from 1988, Overhauled in 2024 Lids feeder: ROTOFEEDER, Germany Product filled: Beer, CSD Design: Left/right Valve: Mechanical...
1988 | 300046845 | KHS
More information
Injection moulding machine for food and beverages caps. Used injection molding machine for caps and closures Brand: Krauss Maffei Model: KM 280-1400 Year: 2007 no auxliaries included machine stopped and available immediately ...
2007 | 300046868 | KRAUSS MAFFEI
More information
Coextrusion lines. 5 layers IBC barrier line A Screw dia. 65 mm / 30D B Screw dia. 50 mm / 30D C Screw dia. 50 mm / 30D D Screw dia. 50 mm / 30D E Screw dia. 65 mm / 30D Extruder A&E - 4 component plastcontrol dosing system Extruder B,C&D - 2 component plastcontrol ...
2012 | 300045171 | ALPINE
More information
Special welding machines. Valve bag welding machine Format range: Double-flat bag width: 350-600 mm Bag length: 450-910 mm Bottom width: 80-180 mm (Bottom width > 160mm - only for bags open on one side) Opened bottom width: 170-380 mm Bottom centre dimension: 350-750 mm Leng...
2012 | 300046909 | STARLINGER
More information
Paper bag making machines. Production of standard of pasted bags (See picture) Length of canister: L2 - 670 ~ 1035 mm Length of bag: L - 520 ~ 880 mm Net length of bag: L1 - 450 ~ 700 mm Width of bag: B - 400 ~ 550 mm Width of bottom: B1 - 90 ~ 130 mm Outspread width of botto...
2006 | 300046894 | TECON PACKAGE MACHINERY
More information
Injection moulding machine for PET preforms. Used injection molding machine for PET Preforms Brand: Nissei ASB Model: PM-85/110 Year: May 1998 Number of cavity: 16 Maximum preform weight: 65 gr Neck format: 28mm PCO preform weight: 52gr - 46,5gr - 48gr Auxiliaries: Dryer: Matsui APD 200 De...
1998 | 300046904 | NISSEI ASB
More information
Injection moulding machine for PET preforms. Used injection molding machine for PET Preforms Brand: Nissei ASB Model: PM 85/110 Number of cavity: 16 Neck:28mm PCO and BPF preforms weight: 20,5gr - 23,0 gr - 23,5gr - 25,5 gr Auxiliaries available: Dryer: Matsui AMD 250 Dehumidifier: Matsui A...
2002 | 300046905 | NISSEI ASB
More information
Injection molding machine up to 250 T . Working hours May 2024 = 53.000...
2004 | 300046930 | BATTENFELD
More information
Corona treatment. Working length (mm): 800 Line speed m/min: 70 Sides to be treated: 2 sides...
2009 | 300046940 | MARTIGNONI
More information
Thermoformer. Minimum forming area 485 x 130 mm Height of formed part 150 mm/180 mm Dry cycle speed 40 cycles/min. Maximum film width 835 mm Servo plug assist KIST stacker Included Mould Termostampi for disposable cups 50 cavities, diam 70.5 mm 180/200 ml...
2007 | 300046976 | KIEFEL
More information
Chiller. Pressure = 1.6 MPa Power: 1.5 hp Fluid : R407 C Condenser water flow: 9600 lt/h Dimensions: 147 x 91 x 190 cm...
2001 | 300046982 | FRIGOMECCANICA
More information
Stretch film extrusion line. 3-layer cast line for stretch reel production Extruder diam 100/160/100 mm % layers 20/60/20 Gravimetric batch 4 components per extruder Chill roll width 2700 mm Diam chill roll 1200 mm Max line speed 500 mt/min Thickness control Electronic Systems...
2005 | 300046988 | TECNO COATING
More information
Bottle inspector. KRONES glass bottle inspector from 2013 For checking the neck damage from the top Bottle sizes: 0,25L 0,3L 0,33L 0,75L 1,0L Max output at the smallest size of the bottle: 40.000 bph Available immediately...
2013 | 300046966 | KRONES
More information
Stretch blow moulding machines. Used Stretch blow molding machine for oval bottles Brand: Side Model: TMS 2004e Year: 2007 Production: 4000 bph preferential heating oven. machine stopped ...
2007 | 300047007 | SIDE
More information
Glass bottles filler for W&SD. KRONES monoblock (Rinser/Filler/Capper), year 1997 Including: Rinser for glass bottles Vacuum filler 4000 l/h. Hot filling at 85 gr.C Accessories for glass bottles: 0.2; 0.7; 1 l Caper Al cap MCA 28 KRONES Binetta (Labelling machine) - one label (...
1997 | 300047045 | KRONES
More information
Melt pump. Never used in production Technical Data: Rotational speed [U/Min] max. 200 Torque (NM) max. 12800 Differential pressure [bar] max. 250 Viscosity in Pas max. 30.000 Temperature in °C max. 350 Housing Alloyed steel Gear shafts Tool steel Shaft Seals...
2020 | 300047054 | MAAG
More information
Shrink Wrapper for PET bottles. Krones tray skrinkpackerVARIOPAC PRO TFS-4-DS - 2021 For Energy drinks, Tea, Juice Current containers volume: 12oz to 20oz -4x3, 3x2, 2 packs x 2packs Up to 6 lanes Only 1.200 hours! Dismantled and stored. ...
2021 | 300047107 | KRONES
More information
Shrink Wrapper for PET bottles. ACMI FENIX 265V Year 2017 Shrinkwrapper, pad & tray Shrinkwrappingmachine to handle only film on double lane, pad with film and tray with or without film on single lane Max. dimension of pack on single lane: 660 x 300 x h360mm Max. dimension of ...
2017 | 300047102 | ACMI
More information
Winder for flexibles tubes and profiles. Working hours 20 hours Speed 32 rpm...
2014 | 300047115 | LUNARDON
More information
Cup printing machines. Printing diameter: 40-100 mm Max. printing width: 105 mm Max. printing bevel: 15º Max. printing speed: 12 000 pcs/h...
2015 | 300047108 | XUANHAI
More information
Chiller. Chiller model:zcf127_re - 10kw absorption - month and year of manufacture: JUL-2020 - Refrigerant R410A - Refrigerant charge 3.4 kg - PS HP 45.0 barg - PS LP 29.5 barg - TSMIN -10°C -TS MAX 80°C - PED CATEGORY - Group II - GWP 2088 - Tonnes of C...
2020 | 300047195 | CF CHILLER FRIGORIFERI SRL
More information
Stretch blow moulding machines. Used Stretch blow molding machine Sipa Brand: Sipa Model SFR 8E Year: 2006 Neck: 38mm Juice Production: 12.000 bph machine in working condition ...
2006 | 300047196 | SIPA
More information
Sleever for PET bottles. Seaming Machine for sleevers FRESCHI ITALIA Model TBR/2 START 550-300, from 2018 Speed- 300 m per minute This High Speed shrink sleeves seaming machine is use to seaming film material into tube type Used for bottle labellers/sleevers In very goo...
2018 | 300047048 | FRESCHI ITALIA
More information
Palletizer. Columbia SP4000 high level palletizer - year 2016 The SP4000 can handle a wide variety of package types including cases, display packs, totes, trays, bundles, shrink lm without pad, bales, plastic containers, crates, small cases and more 60 cases ...
2016 | 300047204 | COLUMBIA
More information
Extrusion Blow Moulding machines up to 2 L . Extrusion Blow molder Battenfeld-Fischer VK 1-1.02 Year 1990 Motor power : 28 kW Heating power: 14 kW Two-head Center distance 100 mm Hot knife Deflashing unit Extraction gripper MOOG parison thickness control 25 points Siemens PLC Simatic S5 New ...
1990 | 300045056 | BATTENFELD FISCHER
More information
Robot. IML Side entry robot: Spider series SM2l Axis x: 600 mm Axis y: 700 mm Axis z: 1800 mm Payload: 3 kg...
2011 | 300047230 | CAMPETELLA
More information
Other Machines for Drinks. ICE water treatment Plant from 2011 Capacity: 6 m3/hr Includes: Raw water pump; GRP tank; AC; UV ,5micron filter, PHE, RO unit, Mineral prepration & Dosing system, 1micron filter, Treated Water Tank, Pipeing , CIP unit ...
2011 | 300047232 | ICE
More information
Other Dairy Machine Type. Ultra Filtration System ALPMA DSS Module M37 Was used for the production of double cream cheese, quark (low-fat quark as well as quark with 20% and 40% FiT) and skyr Also concentrated milk with 3.7 % fat to 37 % dry matter Depending on the product...
2001 | 300045799 | ALPMA
More information
Stretch film extrusion line. Products: PE stretch film Width of film: 1500mm (500mm×3 rolls；500mm×2 rolls+200mm×2 rolls) Thickness of film: 10-55um Raw material: LLDPE, mLLDPE Film structure: A/B/C/B/C (3 extruder with 5 layer) Extruder A: 65mm, 30/1 Extruder B: 110mm, 30/1 Extr...
2021 | 300047247 | HB MACHINERY
More information
Chiller. TRANE CGAX 039 SE-SN. Air-cooled scroll chiller. TRANE CGAX 039 SE_SN, equipped with 2 fans. Net cooling capacity: 111 kW Total power absorbed during cooling: 38 kW. Year of manufacture: 2018. Dimensions: 2.32 x 2.25 x 1.54H [m]. Disassembled Store...
2018 | 300047277 | TRANE
More information
Other Machines. Flexographic Platemaking Production Equipment Resolution: 4000 dpi Thicknesses: 0.030" up to 0.255" / 0.76 mm to 6.35 mm Plate Size: 48" x 35" / 1200 mm x 900 mm (or smaller) Production Capacity m2/hr: 4 m2/hr Files: LEN or TIFF Includes Full U...
2010 | 300047290 | ESKO
More information
Grinder - Granulator. Driving motor 160 KW with belt transmission LDPE, HDPE dust-free materials ...
2014 | 300047248 | PREVIERO
More information
Dairy bottling Line. Yoghurt bottle filling line Tecsor Bosch Group, year 2011 Model: Integral 12 Capacity: 200ml & 330ml Water SKU- 9800 B/h Product: Yogurt Includes: Tecsor filling machine: Preform loading/ sorting unit, Preform Heating unit, Blowing unit, Filling...
2011 | 300047231 | BOSCH
More information
Other Machines. The robot is 100% operational with full equipment. Maximum load capacity: 180 kg Maximum range 3150 mm Robot arm Mechanical/suction gripper Support column Safety fence Control cabinet Control panel only 3h working hours ...
2019 | 300047303 | ABB
More information
Air Compressors (High Pressure). Used ABC compressor Construction year 2009 Nominal pressure 42 bar 800 rpm 92 kW 500 m3/h Wroking hours 19.954 Available immediately...
2009 | 300047294 | ABC
More information
Extrusion Blow Moulding machines up to 2 L . Automatic deflashing Leak tester...
1997 | 300047343 | AUTOMA
More information
Silos. Available 13 silos (price per silo) Silos: nº10 Tipo A n°3 tipo B Diameter TIPO A m 1,240 TIPO B m 1,240 Height TIPO A m 3,250 TIPO B m 3,050 m³ silos TIPO A m³ 15,7 TIPO B m³ 14,7...
| 300047360 | HOME MADE
More information
Complete filling line for fountain water (19 L). Used Bardi line for 5 galons watercoolers filling Outout: 300bph Working hours: used only time to time NOT included labeller, depalletizer and palletizer Decapper Bardi Washer Bardi Victoria LS27 2R Year 2002 Monobloc Bardi RL2 TPI - 2 heads T...
2002 | 300047373 | BARDI
More information
Sleever for PET bottles. Used Finpac SHM HS Shrink Sleeving Line from 2015 Container size: 330 ml, 445 ml, 550 ml. Bottle material = PET Sleeve dimensions: From 0 to 860 mm Operating speed: up to 900 bottle / min or 54000 per hour Available Immediately!...
2015 | 300047380 | FINPAC
More information
Label sheeter - cross cutting. Forming and seaming of shrinkable sleeves Maximum mother reel width at the unwind station 637mm Minimum mother reel width at the unwind station 100mm Maximum input reel diameter 800mm Core input reel: 3" and 6" Max diameter output reel: 3" 5" 6" an...
2003 | 300047375 | DCM
More information
Grinder - Granulator. New bearings, new seals, new stator knives, new bolts and clamps for fixing the knives installed in 2024 Rotor knives: 5 Stator knives: 4 Rotor: Semi-open design, scissor cut Rotor width: approx. 600 mm Inlet: approx. 500 x600 mm kW: 75,0 (can...
2006 | 300047393 | CONDUX
More information
Washing plant. TX500S Particle Cleaning Equipment (Purifine Line) to produce clean PET flakes (Fines). During the PET bottle washing process, there will be centrifugal dryer in different section. Purifine is a washing line designed to wash the fine(powder) coming...
2021 | 300047326 | BORETECH
More information
EPS pre-expanding. The EPS raw material is conveyed as granules to the pre-expander, where it is heated by means of wet steam. The hot steam softens the polystyrene beads and activates the blowing agent dissolved in them. This evaporates and causes the softened beads ...
2012 | 300047466 | KURTZ
More information
Pasteurizer. Bactofuge sludge steriliser ACTINI Construction year 2014 With a capacity of 500 l/h Treatment : Inlet temperature 50 °C Processing temperature 120 °C Output temperature 70 °C Actually used for milk, but can be used also for juices and beer dep...
2014 | 300045012 | ACTINI
More information
Cast coextrusion lines. Number of Layers: 5 4 extruders. Each extruder is equipped with 2-component dosing system (Foremost Duplex Blender) 680 kg / Hour and 172.4 kg/h respectively 1.Virgin 50-100% 2.Regrind 5-50% 3.Color 0.5 – 5% Jumbo and Automatic rolls Product width : ...
1996 | 300047465 | BATTENFELD GLOUCESTER
More information
Other Machines for Drinks. Fanuc robot from 2020 Model M-20iA/35M Axis robot: 6 Payload: 35 kg Reach: 1813 mm Ideal for multiple medium payload applications. Handles large grippers and medium payloads at high speed...
2020 | 300047456 | FANUC
More information
Injection molding machine from 250 T up to 500 T . ...
2014 | 300047538 | ARBURG
More information
Coextrusion lines. Material thickness range 50-260micron 6 extruders diam: 75 mild grooved,45,60,60,45,75 mild grooved Screen changer type Lever 1 Die 400mm for 5 extruders (7 layers) 1 Die 500mm for 6 extruders (7 layers) Colortronic dosing units : Extruder 1 Type ...
1996 | 300039022 | BARMAG
More information
Mounter proofer. Min-max repeat : 350-1200mm. Currently there is a shaft for a sleeve of 1240mm diam 105.158. There are 2 cameras for microdot mounting, for example. There's also a linear guide with digital display for multi-track plate mounting....
1999 | 300047584 | PIOLAT ENGINEERING
More information
Other Dairy Machine Type. FOSS MilkoScan FT2 infrared equipment for physicochemical analysis of milk and liquid dairy products, year 2009 It controls and standardises liquid dairy products while simultaneously screens for abnormalities. It screens raw milk samples and protec...
2009 | 300047594 | FOSS
More information
Dosing and metering equipment. Bag chute type BD-FW80-GB Product: Additive powder/mixtures Flow properties: limited flowing Density*/ bulk density min./max.: 0.7 kg/l Basic version: - 4 stainless steel feet - Hopper, approx. 200dm³ - Support grid in the bag chute - with front door...
2019 | 300047612 | BRABENDER
More information
Sheet coextrusion lines. This machine make twin sheet and transparent sheet and one colour sheet Main Extruder : power 60hp L/D : 30:1 vented Gearbox ratio : 1:10 AC drive Melt pump with 5 hp 170 kg/hr PS 130kg/hr PP Screw Diameter 65mm Hydraulic Screen changer Coextruder ...
2001 | 300047629 | WELEX
More information
Preheaters. ...
1999 | 300047669 | ILLIG
More information
8 Colours CI Flexo Printing Machines. COMIFLEX CI8 geared flexo machine. The machine was built in 2006, but underwent a mechanical and software upgrade in 2013. Materials : LDPE, CPP, BOPP, PET, paper up to 100 GSM Cast iron frame 120mm thickness CI diameter 1700mm double walls Mechani...
2006 | 300047694 | COMIFLEX
More information
Label flexo printing machines. 8 colours with UV drying: IST system printing width: 120-280 mm front-loading unwinder, 3 inch mandrel automatic elevator for unwinder web insertion unit with tension control automatic web guide Erhardt+Leimer Arcotec corona system Teknek web cleani...
2007 | 300047564 | GALLUS
More information
Tetra Pak filling machine. Tetra Pak Classic TCA1 150 Slim machine, year 2003 Output: 12.000 u/h Version: 020V Includes: - TP SA1 straw applicator, year 2005 - Conveyors - Spare parts - Paper trolley - UK Emerson PLC Hours worked: 14.483 (October 2024) Switch from 200 Bas...
2002 | 300047706 | TETRA PAK
More information
Pellet drier. Infrared tumble system with rotary drum IRD1000 UPM Machinery Sales ltd and dryer HB/N 1500 Dehumidifier technical data : Cable cross section mm² : 6 Treated air m³/h 185 Static pressure mbar 200 Number of blowers 1 Number of towers 2 Blowing po...
2006 | 300047731 | SB PLASTICS
More information
Pellet drier. Infrared tumble system with rotary drum ird 3000 and dryer hb/n3500+pt pet Technical data of the dehumidifier : Cable section 16 mm². Treated air 350-550 m3/h Static pressure mbar 260 Process blowing power : 4 kw Regeneration blowing power : 0.4 k...
2006 | 300047732 | SB PLASTICS
More information
SIG Combibloc line. SIG Combibloc CFA606 filling line, year 1999 Product filled: Tomato paste Including: - Aseptic Filler Combibloc CFA606, year 1999 - Buffer Table - Tray Packer - Shrink wrapper Cartons type: CB6 for 250ml, 350ml, 390ml, 400ml and 500ml Cont...
1999 | 300047734 | SIG COMBIBLOC
More information
Extrusion Blow Moulding machines up to 10L. Included: Blowmoulding machine (without moulds, blowpins, pin and die) Preven head Transport conveyors (horizontal and vertical) Blender Several spare parts (extruder motor, knife system, …)...
2005 | 300047775 | AUTOMA
More information
Preheaters. ...
2009 | 300047789 | ILLIG
More information
Preheaters. Optional device that preheats thick material out from roll. It is preheating material with heat drums. This system is usually used before the heating station of a thermoformer especially for material like PP where the thermal inertia is high and dif...
2017 | 300047790 | OMG
More information
Single screw repelletizing line. Conveyor belt with metal detector Reel feeder Cutter feeder extruder combination S:Gran 125 Modular venting system Closed water circuit on vacuum system Back-flushing screen changer -Screen size in operation: 2 x 245 cm² -Screen diameter: 176,3 mm -N...
2004 | 300047792 | NGR
More information
Thermoformer. Molding table 500x500, adjustable in feed to 200mm. Positive and negative molding. Double heater with preheating and cutting shear. It is capable of 500 cycles/hour with simple molds and 400 cycles/hour with more complicated molds. It has guillot...
2008 | 300047797 | OREU
More information
Chiller. ...
2019 | 300047821 | EUROCHILLER
More information
Cup Fill & Seal machines. Cup Fill & Seal Machine Seal Pack for Water from 2008 Capacity: 144 cups/min Cup pack size: 90ml, 100ml Manuals Included Machine available immediately!...
2008 | 300047748 | SEAL PACK
More information
Rotary compression moulding press. Sacmi Compression Molding Machine year 2000 Includes: - Molding Press CCM001 - No camara - Mold 32 cav. PCO 1810 - Mold 32 cav. 38mm - Mold 32 cav. 30/25 - Scoring Folder machine SCM12LA - Cap hopper - Cooling conveyor, Vacuum Loader, Co...
2000 | 300047869 | SACMI
More information
Other Machines. Feed material : HDPE blown film Single layer film thickness : 0.01-0.025mm Max glove total width (from right to left) : 260 mm x 2 lines The ideal width of roll is +40mm on total width of glove Max length of glove : 280mm Cutting length for each line...
2020 | 300047873 | MING JILEE
More information
Complete filling lines for carbonated drinks. Sidel Bluestar monoblock year 2008 Filling valves 32 and 8 capping stations and 32 rinsing stations Carbonated drinks Filler top speed is 9000 bph Fills: 2ltr, 1.5ml, 591ml, 500ml, 355ml Includes: -Trine Labeller 13000 bph -Starblend mixer 100...
2008 | 300047895 | SIDEL
More information
Extrusion Blow Moulding machines up to 10L. Mould platen sizes (mm) 320x430 Opening stroke (mm) 390 Clamping force 10 Ton Deflashing unit Yes Leak tester No Installed power 97 kw Average consumption 40 kw...
1998 | 300047910 | UNILOY
More information
Label flexo printing machines. Product application: Carton, film and label Substrate thickness Range: 230 gsm to 400 gsm Max mechanical speed: 750 fmp* Second hand Martin unwind diameter 72” (1828.8 mm) Web Width Minimum 11” (279.4 mm) Die Repeat Length Die Cassette 12” to 32”...
2009 | 300047915 | MARK ANDY
More information
Stretch blow moulding machines. Rotary blow molder SMI SR8, year 2005 Neck PCO 28 1881 Bottle volume 0.33 l - 2 l Available immediately! ...
2005 | 300047941 | SMI
More information
Other Machines. ATW Photovoltaic module production Year of construction from 2021 we offer a complete plant that is equipped with very high quality machinery. - Kuka robots Halls: Production / installation area: approx. 70x40m /2800m² Compressed air connection:...
2021 | 300047938 | ATW
More information
T-Shirt flat bag making machine. Materials: LDPE, HDPE, BIO Thickness : from 10µ to 100µ. Maximum reel weight : up to 500 or 600 kg. Gusset device....
2001 | 300044828 | ELBA
More information
8 Colours CI Flexo Printing Machines. 8 colors: 7 working/1 not working Winder and unwinder 800 mm Plate thickness: 1,14 mm Printing speed: up to 200 m/min Quick sleeve change Remote controlled longitudinal registers Remote controlled side registers Longitudinal pre-register system Full...
2004 | 300047936 | CARINT
More information
Mono extrusion lines. ONE VERTICAL EXTRUSION LINE FOR THE PRODUCTION OF BLOWN CLING PVC FILM TR 120 Final Product and Applications The plant produces food grade PVC film with a high degree of stretching capability. Anti-fog. Excellent tack characteristics. Suitable for ...
2017 | 300047980 | RL PLAST
More information
Injection molding machine up to 250 T . with 36500 hours in excellent condition complete with accessories for vertical moulding, double blowing valve with independent control, spare chamber complete with heating elements and Moretto heated hopper with automatic vacuum loader. ...
2005 | 300048006 | BOY
More information
Thickness measuring systems (on-line). Profile 360™ Profile360™ continuously monitors the size and shape of complex profiles in order to assure quality and avoid the high cost of defects. The system acquires thousands of data points around the profile and matches them to a CAD template, w...
2022 | 300048013 | STARRET-BYTEWISE
More information
Other Machines. OPTIMUS high-speed 2D fibre laser machine for cutting plates up to 1250 x 2500 mm. The model offers excellent all-round performance and produces a consistent and reliable result with unrivalled quality and speed. Maximum sheet size: 1250x2500 mm Max...
2016 | 300048025 | ISL PHOTONICS JSCA
More information
Coextrusion lines. 3-layers line for Bio material 3 Extruders 63.5 mm 3x 3-component plasco (2020)+contrex feeders Fixed head with 250 mm die Rotating haul off 1600 with gusseting device Thickness control system Contrex Tower excluded Thicknesses currently produced fr...
2000 | 300048037 | MAM
More information
Dairy bottling Line. Milk bottling line Magnabosco Year of manufacture: 2007 Output: 500 b/h Bottle size: 1000 ml PET Filling machine for milk consists of the following elements: - Pasteurization group for milk - Stainless steel filters for milk - Vacuum deodori...
2007 | 300033660 | MAGNABOSCO
More information
Thermoformer. Min Forming area . 260 x 250 mm Max. sheet width 570 mm type of heaters 15 kW / 15 kW top/bottom Regulation: individual Preheater: KVH83 Cycles/minute: 45 (dry cycle) Servo Plug Assist Stations: Forming / In mold cutting + Stacking ,...
2009 | 300048063 | KIEFEL
More information
Metallizer. Core diameter (internal) : 152mm Max. winding tension : 362 N Min. winding tension : 30 N Maximum drum tension : 869 N Web coating : - Aluminium evaporation source - Closed loop automatic deposition control system Web treatment : - Plasma pre-trea...
2008 | 300048086 | BOBST
More information
Injection molding machine up to 250 T . Included: DEGA mix 120/70; year 2007...
2006 | 300048087 | ARBURG
More information
Double-shaft film slitter-rewinders. Hydraulic roll lift and disc brake when unwinding BST CLS Pro edge and line guide device Pinching device with retracting drive 3-motor DC drive system with analog drive control Slotted roll cutting station with multiple knife holders Fan for removing...
1997 | 300048116 | COMEXI
More information
Filler for pouches. Primach- 2018 -Hp180s-2 Pouch filler Horizontal Form Fill Seal Machine Cold-fill processing For special shape stand up pouch 2-lane machine 80 pouches per minute Capable of filling 2oz. liquid pouches Tear Notch Straight Line, Steel Letter Pr...
2018 | 300048114 | PRIMACH
More information
Screen changer for extruders. Double piston screen changer for continuous operation. Output: 800 - 1200 kg/h 4 screens - two per piston. Diameter of each screen - 170 mm Total power 30 kW...
1998 | 300048123 | EREMA
More information
Cup Form-Fill & Seal machines. Cup Form Fill and Seal packaging machine CIMIPACK PACKFORM ECO SPECIAL Manufacture year: January 2020 VERSION: ULTRA CLEAN PNEUMATIC DOSING UNIT: WITH N° 8 VOLUMETRIC PUMPS OF 10 / 120 CC PRODUCT TO BE PACKED: SINGLE DOSES OF SPREADABLE CHEESE, CR...
2020 | 300048100 | CIMIPACK
More information
Other Machines. Ink Dyspenser GSE Colour Slim. Fully refurbished, new computer and software GSE Ink Manager. Ready for installation. GSE Colorsat Slim Dispensing machine for precise mixing of water-based inks. Main Components: 16 valves Pump module – controls ink f...
2010 | 300048159 | GSE
More information
Complete filling lines for carbonated drinks. Complete filling line for CSD Krones Formats: 1,5L and 2L PET Neck: PCO 1810 Output: 12.000 bph Includes: 1. Blower Krones Contiform 112-10 Compact from 2001 2. Filler, rinser, capper and labeller Superbloc VK PET 100 SA K from 1993 3. Air convey...
2001 | 300048184 | KRONES
More information
Extrusion Blow Moulding machines up to 10L. Includes moulds 10 and 5 lt. + spare parts...
2023 | 300048221 | TONGDA
More information
Injection stretch blow moulding machines for PET bottles. Injection blow-molding machine Nissei ASB 70-DPH V1, year 2001 One-stage biaxial orientation stretech blow molding machine Includes: - 2 Take-out robot models - Piovan charger & dispenser (& hopper) - Corema oil Thermoregulator - Second Nissei A...
2001 | 300048219 | NISSEI ASB
More information
Other Machines. The production line is designed to produce 3 layers Surgical Mask. Line composition: Material loading unit Mask welding and cutting unit Two earloop welding units Mask Type： Disposable Medical Mask General Surgical Mask Size: 175 mm x 95...
2020 | 300048244 | RICHPEACE
More information
Grinder - Granulator. - Motor power: 7,5 Kwh - Inlet dimensions: 44,5x25cm -Rotor diameter: 29cm - Number of blades: 4 blades - Diameter of outlet of the installed sieve: 30 cm the circular outlet but the mouth is square and is 23x18cm 4 Grinders available: 1 from 2008 ...
2008 | 300048247 | DIPRE
More information
Welding machine for pipe sockets. PL315 CN Computerized welding machine PL315 CN is an welding machines to welding pipes in PP, PE, HPE, PVDF till 315mm of diameter with all clamps to be able to block from OD 50 mm till 315mm...
2015 | 300048249 | TECNODUE
More information
8 Colours CI Flexo Printing Machines. Water based inks/solvent inks Print speed: up to 200 m; depending on the job Material: paper 40-120 gr; film Thickness of printing plates and of adhesive for the plate:1.14; 1.74; 2.54mm Non Stop unwinder and rewinder Max roll diameter:1000mm Web gui...
1998 | 300048177 | FLEXOTECNICA
More information
Dosing and metering equipment. 3 Layers gravimetric dosing system 200 kg/h and mono layer gravimetric hopper 100 kg/h, volumetric doser 25 kg/h Scope of supply: 1x Easy Batch S-4 1x Easy Batch S-4-SL 6x FTI-S feed throat interface 2x Syncroline C3 yield and gram/metre control...
2019 | 300048261 | SYNCRO
More information
T-Shirt flat bag making machine. Automatic line type SA90HS (high speed) for the production of HDPE/LDPE T-shirt bags with 3 lanes. Max. quantity of bags per pack : 100 (according to the thickness and quality of the film) Stacker on needles positioned at 120mm from the edge of the b...
1996 | 300048329 | ELBA
More information
Air Compressors (High Pressure). Used Atlas Copco Crepelle compressor Screw compressor: Atlas Copco ZR145 - 129 Kw Booster compressor: Crepelle D24 - 75 Kw Air Flow: 1320 m3/h machine stopped ...
2000 | 300048346 | ATLAS COPCO
More information
Other Machines. Two machines for the production of FFP2 masks with the possibility to produce FFP3 (price per line). - 6 rolls of fabric loading - Artificial vision for defect checking - Automatic tissue feeding and placement - Automatic nose wire feeding and placem...
2020 | 300048352 | RICHPEACE
More information
Ice Cream Machinery. Ice cream turbine Carpigiani Labotronic 15-20 L, air cooled Manufacture year unknown Complete equipment of an ice cream parlor (working until activity cease). All equipment is available (from spoons to complete equipment) to get started right awa...
| 300048398 | CARPIGIANI
More information
Injection stretch blow moulding machines for PET bottles. Strecht Blow Molding Machine AOKI SBIII-500LL-75 from 2004 Includes: - dryer Moretto from 2004 NO MOLD neither hopper included Working hours aprox. 80.000 (march 2025) Dismantled and stored....
2004 | 300048421 | AOKI
More information
Other Machines. Pellet Production Line LDG-4000 MAX+ — Technical Data System components: Screw feeder PS-1500 Tank capacity: 1.5 m³ Power consumption: 2.6 kW Functions: mixing material, continuous feeding to the pelletizer, cyclone function with integrated filter ba...
2021 | 300048455 | TECHNOMASZBUD
More information
Stretch blow moulding machines. Used Kosme KSB 3D Neck: PCO 1881 Production: 3.500 bph Format: from 0,5 to 2,0 lt machine in production ...
2007 | 300048473 | KOSME
More information
Die head for tubes. Tooling for PVC U pipes pressure (no Die Head) - Diameter 500: Female, core and bushings for 6 and 10 atm thickness - Diameter 400: Female, core and bushings for 6, 10 and 16 atm thickness. Females have the resistors incorporated....
| 300048475 | TECNOMATIC
More information
Injection molding machine from 250 T up to 500 T . INJECTION MOULDING MACHINE Make: TOYO. Model: PLASTAR Si-350 V. Injection group: JH750C. ADDITIONAL EQUIPMENT ü Spindle diameter 60 mm. ü High plasticization barrier screw. ü Specially designed 150 mm. long nozzle. ü Hopper with lid 40 l. ü Blowi...
2012 | 300048479 | TOYO
More information
Cans filler and capper. Wild Goose Evo 5 from 2022 5valves It can accommodate a range of interchangeable can heights with same body diameter and lid 224 cm L x 97 cm W x 274 cm H Dimensions: 224 cm L x 97 cm W x 274 cm H Includes Ska half pint depal ...
2022 | 300048489 | WILD GOOSE FILLING
More information
Packaging machine. Tetra Cardboard Packer TCBP 32, year 2013 With Wrap around option Packed 200 ml slim bricks Hours: 16.227 Dismantled but in very good condition...
2013 | 300048470 | TETRA PAK
More information
Injection moulding moulds. Set of moulds for production of child car seats. There are 7 moulds in a set (injection moulding and extrusion blow moulding moulds) Designed for the production of four types of seats: HDPE car seat (weight group: 9-36 kg) HDPE car seat + moving h...
2010 | 300048496 | HOME MADE
More information
Butter equipment. Complete cup filling line Waldner Dosomat for margarine Including: 1. Rotary filler Waldner with 4 lanes (capacity 7500-10000 cups per hour). Piston dosing with special filling valve 2. Packer Waldner WP (warp around) (capacity 625-937 cartons per ...
2012 | 300040243 | WALDNER
More information
Pouch making machine. Machine for the production of three sealing pouches, zip-lock pouches and doy pack pouches with a welded bottom model Max bag width 600 mm The maximum width of the processed material is 1250 mm. The maximum diameter of the unwinding rollers is 600...
2021 | 300048517 | YEZD
More information
Grinder - Granulator. Granulator Type 50-40 BLM, 18.5 kW, 240 kg/h nominal capacity Screen : 10mm Suitable for all types of plastic...
2007 | 300048521 | TRIA
More information
Twin-screw extruder for PVC compounds. 2x complete lines for PVC granulation 600 - 1000 kg/h (depending on the formulation) - 2x Twin screw extruder 130/22 - 1x Screen changer - 2x die face cutting head - 2x pellet coolers NOTE: Price per line...
2006 | 300048547 | INDUSTRIE GENERALI
More information
Stretch blow moulding machines. Used Stretch blow molding machine Sidel Model: Sidel SBO 8 Series 2 Caterpillar Oven Neck: 30/25 Production: 10.000 bph Spare parts included machine installed ...
2001 | 300048558 | SIDEL
More information
Complete PET filling line for still water. Products: still water Bottle type (basic): from 0.5 l to 1.5 l volume (due the specifications of the filler the maximum format is 1.5lt) PET closing type: 30/25 Labels: Plastic Roll Fed Package format: 3x2, wrapped in heat shrink film Tray: Euro...
2008 | 300048527 | SIDEL
More information
Ice Cream Machinery. Continuos freezer CATTA 27, Model K200 Capacity 200 lt/h Refrigerant: R404 El Requirements : 380V /3 PH/ Hz 50 ...
1999 | 300043921 | CATTA 27
More information
Label Rewinder. Inspection cutting-rewinding Web guide Master roll adjustable splice Flag & splice sensor Unilux strobe mounting Razor slit assembly Main drive assembly- 2.2kw...
2011 | 300048596 | ABG
More information
T-Shirt flat bag making machine. Bag making machine for t-shirt bags (year 2012) with 6 colors printing machine inline (year 1996) Thickness : 35- 120 Micron Max bag Width 250 cm The printing machine has not been used for some time, so in case of a test, the printing machine will ...
2012 | 300048588 | LEMO
More information
Label sheeter - cross cutting. Machine specially designed to apply primer coating to substrates for digital printing processes. Roll diameter Unwind/rewind max. 700 mm web width max. 350 mm Coating width max. 340 mm speed max 60 m/min Unwinder/rewinder pneumatic shafts with sta...
2016 | 300048614 | SMAG
More information
Cup Form-Fill & Seal machines. Benco Pack Asepack/8-D P336 aseptic yogurt filler, year 2005 Output: 9600 cups/h Product filled: Yoghurt and flan Hours worked: Around 15.000 Cup format: Square Cup diameter: +/- 60*64 mm Cup min/max volume: 125ml – 200ml Number of dosing units:...
2005 | 300048654 | BENCO PACK
More information
Other machines for filling and packing. Complete Chocolate Molding Line Winkler and Duennebier WDS Confec 372, year 2017 Made in Germany Capable of producing chocolate bars with and without inclusions, with filling, and pralines Output capacity: up to 648 kg/h Speed: up to 20 molds/mi...
2017 | 300048660 | WDS
More information
Stretch blow moulding machines. Used stretch Blow molding machine Sidel Model: SBO 2F Format: 5lt Neck: 48mm machine installed ...
2003 | 300048666 | SIDEL
More information
Coextrusion lines. Screw& Barrel: 75/90/75mm Bimetallic screw& Barrels Die: 500mm IBC Thickness reange - 20-200mic. Profile measurement system- Kundig Profile Control System(Auto Gauge)- Brampton Gravimetric System- Doteco: 1+3 components Chillers- OBC & IBC EuroChille...
2010 | 300048663 | MAMATA
More information
Complete glass filling lines. Used Water bottling line in glass bottles Manufactured by Exquisite company (Romania) Monobloc: SDC 18-18-6 Labeler: Exquisite E1A-Rvac (Self Adhesive) Shrink Wrapper: Exquisite Bax 2010 Format: 0.75 liters with aluminium caps. Production: 6.000...
2012 | 300048674 | EXQUISITE
More information
Pipe belling and socketing machine. No tooling included...
1998 | 300048700 | IPM
More information
Injection moulding machine for PET preforms. Used injection machine for PET Preforms. Brand: BMB (Made in Italy) Model: KW280 PET/3450 SP the system include the follow auxialiaries: Dryer: SMC MODOTECH MWD350 year 2010 Mold Dehumidifier: Piovan RPA 800 year 2005 Filter: KE SWE 180 Hopper: M...
2010 | 300048714 | BMB
More information
Single screw repelletizing line. Conveyor belt length: 5000 mm Conveyor belt width: 800 mm Metal detector: S+S, detects ≥2 mm Compactor (Agglomerator) – motor power: 55 kW Compactor cooling system: water Rotating blades: 9 pcs, material SK4 Fixed blades: 12 pcs, material SK4 Bearing...
2017 | 300048719 | JIANGSU
More information
Injection molding machine from 250 T up to 500 T . Robot included Working hours: 65 000 h...
2010 | 300048738 | KRAUSS MAFFEI
More information
Sorting and separating plant. The sorter was used to separate coloured and clear beverage bottles. Incl. acceleration belt Detection System Color:High-resolution CCD color line scan camera Detection System Metal:Segmented high-frequency detection coil Sensor Resolution Metal:16...
2010 | 300048742 | SESOTEC
More information
Screen changer for extruders. ...
2021 | 300048748 | TRENDELKAMP
More information
Digital printing machines. The HP Indigo 30000 Digital Press is a breakthrough 75 cm format offset-matching sheetfed solution especially designed for folding carton production Tresco iCoat 30000 Printing speed 3450 sheets per hour 4/0; 4600 sheets per hour in EPM Image resol...
2015 | 300048755 | HP INDIGO
More information
Mono extrusion lines. Working hours around 30.000 Thickness range:30-200 my Gravimetric dosing unit for 4 components Fixed die head 300 mm with IBC , Gap 1,8 Rotating Haul off Web guide Fife CDP-01 Corona treatment Ferrarini & Benelli Tower...
2002 | 300048782 | BIELLONI
More information
Sorting and separating plant. SORTEX B5 MultiVisionDXDX Optical Sorter with 5 different channels Materials: for sorting plastic, grains, coffee, seeds, rice, nuts. Hi resolution MultiVision inspection system uses multiple visible wavelengths (red, green and blue) to detect the su...
2019 | 300048784 | BÜHLER
More information
Accumulation Head Extrusion blow moulding machine. Accumulator head machine Capacity 16 kg (PP) Clamping force 90 t Column distance horizontal: 1200 mm Column distance vertical: 2100 mm Min mold thickness 2x 405 mm Daylight 1800 mm Parison holders (top and bottom) ...
1996 | 300048790 | UNILOY
More information
Single-screw extruder for PE/PP. LIQUID-COOLED TORQUE MOTORS Another similar extruder year 2013 available (price upon request) Available also Tecnomatic ATLAS 45/30 from year 2018 and year 2016 available for sale (price and pics upon request)...
2018 | 300048791 | TECNOMATIC
More information
Single-screw extruder for PE/PP. LIQUID-COOLED TORQUE MOTORS Another similar extruder year 2016 available (price upon request) Available also Tecnomatic ZEUS 75/37 from year 2018 and year 2013 available for sale (price and pics upon request). output 700 kg/h Gravimetric NOT Include...
2018 | 300048792 | TECNOMATIC
More information
Twin-screw extruder for PE/PP compounds. 1x Corotating extruder diam. 25 LD 40 2x Gravimetric units K-TRON 1x Cutting face die head 1x feeding pump 1x Electrical cabinet...
1999 | 300048795 | WERNER & PFLEIDERER
More information
Accumulation Head Extrusion blow moulding machine. Accumulator head machine Capacity 10 kg (PP) Clamping force 60 t Column distance horizontal: 800 mm Column distance vertical: 1300 mm Min mold thickness 2x 305 mm Daylight 1500 mm Parison holders (top and bottom) Grinder included...
1998 | 300048796 | UNILOY
More information
Ultrasonic welders. ...
2001 | 300048797 | BRANSON
More information
Extrusion Blow Moulding machines up to 2 L . Clamping force 2 t Column distance horizontal: 240 mm Column distance vertical: 300 mm Min mold thickness 2x 102,5 mm Daylight 135 mm...
2017 | 300048798 | GENERAL PLASTICS
More information
Extrusion Blow Moulding machines up to 2 L . Clamping force 4 t Column distance horizontal: 300 mm Column distance vertical: 400 mm Min mold thickness 2x 102,5 mm Daylight 200 mm...
2016 | 300048799 | GENERAL PLASTICS
More information
Stretch film extrusion line. Production capacity kg 1400. Motan gravimetric units installed in 2020 Extruders with Siemens motors Extruder A: diameter 160mm - center layer Extruder B: diameter 160mm - double layer Extruder C: diameter 80mm - inner layer Extruder D: diameter 130m...
2005 | 300048814 | TIQUATTRO
More information
Extrusion line for PE/PP pipes. Windsor make HDPE PIPE PLANT details of the same are as follows : 1.Single Screw Extruder(45-37-75KW) 250kg/hr Output With AC Motor & Drive ,PLC(B&R) Windsor 2.Dryer Hopper Loader Make NuVu-CONAIR (250kg capacity) 3.Die Head SM-160 20mm to 110mm O...
2021 | 300048836 | WINDSOR
More information
Agglomerator. 2 identical grinders + agglomerator + cutting granulator. Material that can be processed: PP and PE Higher consumption of motors (ordered according to in-line positioning): 1. Grinder IPS 500x750: 75 kW 2. Blower (fan) : 11 kW 3. Agglomerator IPA 4...
2002 | 300048861 | H.-I. PALLMANN
More information
Letterpresses. No. of Station: 8 - Stations 1-5: letterpress - Station 6: Flexo - Station 7: Back printing - Station 8: Rotary station Max. material size: 370 mm Max. jump: 405 mm Min. jump: 5 mm Rotary die cut area: 370 mm Max. speed: 200 mm Rotary feeder avail...
2010 | 300048879 | ORTHOTEC
More information
Other Machines for Drinks. Ionizer for Alkaline water Brand: US brand Life Ionizers Capacity: 3,000 lit/ hour, pH 9 ± 0.5 Machine available Immediately!...
2017 | 300048579 | LIFE IONIZERS
More information
Stretch blow moulding machines. Included Preforms hopper Preforms feeder Octabin dumper Production: 6.000 bph Working hours: 55.000...
1998 | 300039076 | KRUPP CORPOPLAST
More information
Injection molding machine up to 250 T . Handling model : Liinear handling system, Demag Ergotech, type W621-1016, year 2002, travel X/Y/Z: 550 x 1,200 x 2,000 mm, Minimum daylight: 250 mm Locating ring: 125 mm - Hot-runner 7 - AW-coupling -small - Core pulls 1 ...
2002 | 300048894 | DEMAG
More information
Stretch blow moulding machines. Used Side Maxiblow (made in Spain) Cavities: 1 Formats from 0.33ml to 8lt Neck: not available, the seller will re-use it in his new machine machine dismantled ...
2007 | 300048922 | SIDE
More information
Injection moulding moulds. ...
2020 | 300046671 | HOME MADE
More information
Injection molding machine from 1000 T. ...
2015 | 300048939 | ENGEL
More information
Extrusion line for drip irrigation. Mopline complete extrusion line to produce thin wall irrigation pipe
Extruder
Screw 75 mm MFT 2022
Scrwew OutPut 300-400 KG/hour for LDPE and LLDPE
Screw Speed on HDPE Din 100 , Output 250-320 KG/Hour
Material Processed HDPE 2023 | 300048945 | MOP LINE
More information
Injection blow moulding PP/PE/PVC and other thermoplastics. No mold included...
2021 | 300048962 | PROCREA
More information
Dosing and metering equipment. Screw diameter: 10 mm Screw pitch: 8 mm Hopper capacity: 6 dm3 Output in weight kg/h: Slow: 0,03 + 0,8 Fast: 0,07 + 1,6...
2018 | 300048969 | MORETTO
More information
Automatic bagging machine. BOX PALLETIZER CARTESIAN ROBOT Brand fabrimatica 6 pallets of 78 boxes per hour Year 2015...
2015 | 300048966 | FABRIMATICA
More information
Monobloc rinser filler capper. Used Aseptic filler Gea Procomac Monobloc Filler and capper Fillstar CX PET2 AS 120.25.113 Bottle discharge tunnel Foil induction sealing tunnel Sterilizable caps elevator Tunnel for the pre-sterilized caps feeding Peracetic solution automatic ...
2007 | 300049036 | PROCOMAC
More information
Extrusion line for tapes (woven sacs). This Uni Directional (UD) Tape Manufacturing Line line has been designed to manufacture PA based carbon fibre tape. The line can be used to also produce PA/GF, PA-CF and PE/GF uni directional tapes. Additional dies can be supplied, upon request. Lin...
2020 | 300049033 | CYGNET TEXKIMP
More information
Rotogravure printing machines. Printing material: PVC: 35-50 µm OPP: 20-40 µm PET: 12-30 µm PE: 25-40 µm CPP: 30-60 µm Nylon: 15-30 µm Mechanical speed: 200 m/min Printing cylinder width: 600-1000 mm (Adapter +- 30 mm) Unwinding/Rewinding max. tension: 20 kg/cm2 Auto color regis...
2016 | 300049064 | WORLDLY
More information
Double-shaft film slitter-rewinders. Unwind Section Hydraulic lift, shaftless type for parent roll loading Tension control via 10 kg/m powder brake Automatic tension adjustment using load cell feedback Line & edge positioning system (E+L Germany) Control System 10-inch full-color touch...
2007 | 300049063 | YODEN
More information
Digital printing machines. Mes y año: N/A. Desbobinador: N/A. Rebobinador: N/A. "Blanket Automated Replacement System" (BARS): NO Kit OFIR: NO Camisa anilox PUW de alta presión: N/A Camisa anilox PUW de baja presión: N/A Camisa de goma PUW: N/A Puente de inspección inv...
2015 | 300049087 | HP INDIGO
More information
Blister and Skin. 1.91 kW motor power 13.9 kW heating capacity Max. film thickness: 1.5mm Positive depth of draw : 120mm Max. sheet width: 545mm...
2001 | 300049098 | ILLIG
More information
Thermoformer. Cycles/min 25 Hydraulic control unit overhauled in 2018. Oven completely renovated with high-efficiency lamps in 2021....
2002 | 300049101 | MORETTI
More information
8 Colours CI Flexo Printing Machines. Material to print: PE, PP, OPP, PET, Paper Mechanical speed: Up to 300 m/min Simple unwinder Turret rewinder Pumps: 8 pcs, Pneumatic with Autowash Camera system, FIFE Anilox cylinders:14 pcs Sleeves: 216 pcs 2 Web guides...
2011 | 300049114 | COMIFLEX
More information
Injection molding machine from 1000 T. ...
2015 | 300049140 | HAITIAN
More information
Injection molding machine from 500 T up to 1000 T. ...
2015 | 300049141 | HAITIAN
More information
Screen changer for extruders. Heating capacity 36500Watt Max. pressure 200 bar Heating zones 5 Weight 3200 kg Overhauled: March 2023 New control panel for operation of the screen changer Accessories: A melt pump is also there along with connecting flanges between screen changer...
2003 | 300046362 | GNEUSS
More information
Injection blow moulding PP/PE/PVC and other thermoplastics. ...
2008 | 300049154 | UNILOY
More information
Injection moulding machine. Used material ABS + PP Product Automobile Bumper Handling ROBOT of Brand ABB...
2015 | 300049165 | ENGEL
More information
Laminators. Min. film width: 600 mm Max. film width: 1330 mm Unwinder: - Max. reel weight: 600 kg - Tension: 1-20 kg Rewinder: - Max. reel weight: 600 kg - Tension: 3-25 kg Materials that can be applied : BOPP : 12-18 μm PETP : 10-30 μm LDPE, LLDPE : 30-20...
1996 | 300049182 | NORDMECCANICA
More information
Injection molding machine up to 250 T . ...
2008 | 300049196 | NETSTAL
More information
Cheese equipment. Complete cheese sclicing and packaging line Weber CCS Including: 1. Cutting machine Weber CCS 304, year 2007 - With option to put foil between the slices (interleaver) - Able to cut 2 cheese blocks of 3 kg each per minute 2. Packaging mac...
2007 | 300049199 | WEBER FOOD
More information
Separators and centrifuges. Milk and whey separator Pieralisi, year 2010 Capacity: 5.000 l/h Milk: Cold mode: temperature: 8-10 gr. C Whey: Hot mode: temperature: 40-42 gr. C Bowl tools availlable. The machine is still instaleed but out of use....
2010 | 300049203 | PIERALISI
More information
Cheese equipment. Cheese packaging machine ULMA - TF Supra, year 2016 For blocks up to 3 kg Top film: OPA/PE, PET/X/PE, OPA/X/PE Bottom fllm: PA/PE The machine is installed but out of use...
2016 | 300049204 | ULMA
More information
Cheese equipment. Horizontal flow packaging machine ULMA FM300, year 2015 Worked with different cutted cheese sizes Performs three totally hermetic welds obtaining a pad-type container for the modified atmosphere packaging (MAP). The machine is installed but out of...
2015 | 300049205 | ULMA
More information
Sorting and separating plant. Optical separating device for plastic material and food Manufacturer: CIMBRIA Srl Model: SEA PIXEL 5 Year: 2008 Complete with raw material feeder and unloading system for final product PLC control Few working hours...
2008 | 300032561 | SEA
More information
Thermoformer. Thermoforming area 1200x1300 Max moulding positions: 95mm Material: EPS dimensions of 80 ml cup: 55,6 mm high; 57 mm diameter dimensions of 200 ml cup: 92,3 mm high; 79,4 mm diameter Automatic Horizontal moulding machines for cups, food trays, contai...
1993 | 300038382 | THERMOWARE
More information
Stretch blow moulding machines. Terekas Flex Blow 4- 2016 6,000 B/H 28m neck PCO 1810 4 cavaties Blowing 2 liter container at the moment 2 sets of molds for 1l and 2l Includes: Hopper, feeder For an extra cost- complete line with conveyoring and bottle palletizer Can't be seen i...
2016 | 300038310 | TEREKAS
More information
Molds. Materials: PVC, PS, PET, PP, BOPS. A set of moulds for container production. Dimensions: 227х178х40 227х178х70 Also included in the offer: Frame Cutting tool Stacking unit These moulds were previously used in production on OMG lines (OMF\PVE 52 P...
2008 | 300038521 | OMG
More information
Grinder - Granulator. Grinder for rubber Fedding throat: 712x410 mm Granulation chamber: 710x430 mm Motor power: 22 kW Rotatory blades: 3+3 Fix blade: 2+2 Screen size: 3 mm output: 490 kg/h (screen 8 mm) Material extraction: gravity with possibiliy of ...
2002 | 300039206 | CMG
More information
Extrusion line for PVC pipes. Extrusion line for medical PVC tube year 2002 - Single screw extruder MT 50 mm 28D (meccanica trecatese) - Calibration tank - Conveyor - Cutting unit - Laser thickness control - Die head - Tooling for PVC tube extrusion ID 8 mm OD 12 mm (400 linear...
2002 | 300039315 | MT
More information
Complete Non-carbonated Aseptic Filling Line for drinks. Complete non-carbonated PET filling line from 2001 Product: Ice Tea without pulp viscosity 13 and acidity 4ph - shelf life 12 months Output: 12.000 bph 1,5lt - 22.000 bph 0,5lt - 8.000 bph 2,0lt Bottles: 0,5L , 1,5L and 2L PET Bottle Closures: 2...
2001 | 300039511 | PROCOMAC
More information
Moulds for Closures. Corvaglia cold half for closures Manufactured 06/2002 Material = lPE Product = Closures 30/25H Product Mass = 2,10g Cycle Time = 4,8 sec Cavities = 48 Working on Husky H225 Available immediately ...
2002 | 300035299 | CORVAGLIA
More information
Moulds for Closures. Complete Corvaglia mold Neck 30/25 Weight 1,8g Cavities: 72 Cold Half Mold was working in a Husky H300 Mold has 25 milions cycles Stored inside a box with anticorrosive oil Available immediately ...
2008 | 300039302 | CORVAGLIA
More information
Blister and Skin. Feeding system Roll fed Thickness: 0,3 microns Max. sheet width 350 mm Depth of draw positive/negative 65mm/65mm Cycles / min: 20 Closing force: 20 kN Drive: 3,3 kW Electrical usage: 24,2 kW Air consumption: 10 bar Working hours 2000 h Frequency: 60...
2006 | 300039681 | ILLIG
More information
Skeletal granulators. Standard Rapid granulator whitch is special developed to oprerate inline with a thermoforming machine. Inside the hopper there is build in a dancer for controlling the skeleton under production. Complete with electric control and transport ventilator...
2011 | 300039793 | RAPID
More information
Extrusion Blow Moulding machines up to 2 L . Angle neck...
1997 | 300040141 | TECNOPLAST
More information
Bag filling machine. Smurfit Socar AFW 850 automatic Bag-in-Box simple head filler Output: 900 bag-in-box/hour - 3 litres (730 BIBs/h - 5 l, 500 BIBx/h - 10l, 372 BIBs/h - 15l, 300 BIBs/h - 20l). The simple-head filler is an automatic machine that can fill ribbon bags...
1996 | 300040390 | SMURFIT
More information
Cap Applicators. Screw Cap applicator GS Pack Format round cap for 1 lt brik Dimensions of the cap: 28.5 mm x 28.5 mm x 23.5 mm x 15.5mm Cap hopper and Cap feeder included ...
2016 | 300040455 | GS PACK
More information
Air Compressors (Low Pressure). Input shaft power 173 kw Motor speed 2955...
2001 | 300040856 | INGERSOLLRAND
More information
Complete glass filling lines. Trasflluid complete glass semi automatic filling line for oil, wine or vinegar from 2014 Line includes: Bottle blower (with air) for 2 bottles at same time (this is for bottles cleaning prior filling) 5 position Filling station with manual position...
2014 | 300041212 | TRASFLUID
More information
Tetra Pak Filling Line. Tetra Pak TBA/3 filling line from 1995 Volume: 1000 ml Base Capacity : 3.600 u/h. Product: juices, but also can fill milk. Includes conveyor. Machine is in good condition and in production...
1995 | 300041227 | TETRA PAK
More information
Twin-screw extruder for PE/PP compounds. Motor 64 kW FEEDING FEEDER FOR MATERIAL DEGASSING WITH VACUUM PUMP KW 4.5 EXTRUDER HAS NO SIDE FEEDER EXTRUDER WAS USED ON CALENDERING PLANT FOR LOW DENSITY PTL PP POLYFINE MATERIALS...
1992 | 300041856 | MARIS
More information
Bottom weld bags on the roll. Format length with: 4 sealing stations 285-470 mm 2 sealing stations 470 - 930 mm 1 sealing stations 930 - 1790 mm Welding width 320x2 mm Roll width 100 - 380 mm Roll diameter max. 250 mm Inner diameter of mandrel 25 - 40 mm Bags / minute M...
1996 | 300042009 | COEMTER
More information
Thermoformer. This machine is designed to produce termoforming moulded products with a pre-punch streching of material. Moulding and cutting of finished products is performed in one unit, which ensures accuracy and repeatability of products throughout the entire p...
2005 | 300042024 | GN
More information
Side weld bag making machine. Bottom and side seal bag making machine Material : LDPE, HDPE, MDPE; LLDPE and recycled Thickness : 0,020-0,100 mm Type of bag: Bottom and side weld (open mouth) Sealing bar 4 punching units for punching holes Bottom folding Knife central and side s...
2005 | 300042084 | GUR-IS MAKINA
More information
Single screw repelletizing line. Suitable for recycling PE scrap Conveyor : 1 x Belt Conveyor 6500mm (L) x 900mm (W) ; 0.75kW 1 Metal Detector with single coil Roll Feed : 1 Reelfeed 0.75kW ; 500mm (W) Extruder : 1 OMEGA 105 Hydrocool • S7 Siemens Control System and components ...
2013 | 300042300 | PLASMAC
More information
Extrusion Blow Moulding machines up to 2 L . Extrusion Blow molder Battenfeld-Fischer VK 1-1.01 Year 1990 Motor power : 37 kW Heating power: 28 kW Two-head Center distance 100 mm Hot knife Deflashing unit Wall thickness control Profilok 32 points with 10 program memory ...
1990 | 300042450 | BATTENFELD FISCHER
More information
Die head for Blow Extrusion. double exit head PLASTIBLOW - Center distance 150 mm...
| 300042468 | PLASTIBLOW
More information
Air Compressors (Low Pressure). Engine power: 185 kW Fan power: 27 kW Approximate working hours: 16775 hours Production capacity: 1500 m3/hour Air-cooled....
2008 | 300042655 | GARDNER DENVER
More information
Juice Extractors. Used- Langsenkamp Laboratory Separator, Model 150 - yr. 2011 Handles product down to 500 microns for juice extraction Features variable speed/flow rates 316 Stainless Steel. Approximate capacity 1 to 2.5 tons per hour Approximate 7" diamete...
2011 | 300042727 | LANGSENKAMP
More information
Bottle printing machines. Offset pail printer 9 colors Product Angle 10° Main Engine 7kW Total Power35 kW Air Pressure 6 bar Pneumatic Discharge Rotary table UV Drying UV Laquering Station Automatic Feeding (Inot working correctly) 9 Colour Heads+Laquer Unit 8 mandrels A...
2002 | 300042787 | KASE
More information
Palletizer for empty bottles. Automatic palletiser for empty glass bottles Promalyon, year 1998 Output: up to 6000 bottles / hour It works with 4 different models of empty bottles on 4 palletising tables at the exit of our washing line Includes: - palletiser, with a pallet...
1998 | 300042935 | PROMALYON
More information
Robot. X-900, Y-1800, Z-2500...
2000 | 300043088 | WITTMANN
More information
Cheese equipment. Ulma- PV350 LSH-I-X - 2008 Horizontal flow packing machine for mozzarella cheese, but can work also with other types. Filled packes 150mm long X 60-290mm wide X 25-225mm High Speed: 60 units per minute ...
2008 | 300043226 | ULMA
More information
Washing machine for glass bottles. Reeve-X-V Glass bottle air cleaner It receives bottles spins around blows air into the bottle and has a vacuum attachment to suck out whatever was blown out of the bottle 3000 bottles per hour Available immediately! ...
| 300043230 | REEVES
More information
PET labelling machine. Labeling machine PE FUTURA 6T/540/1S-1E for PET bottles Year 2006 Capacity 10,000 un/h The machine can also apply labels to a square bottle Machine is diismantled and available immediately! ...
2006 | 300043348 | PE
More information
PET labelling machine. Labelling machine PE FUTURA S 8T-540-1S 1E for PET bottles Year 2003 Capacity 10,000 un/h The machine can also apply labels to a square bottle Machine is diismantled and available immediately! ...
2003 | 300043349 | PE
More information
Shrink Wrapper for PET bottles. Sidel Versafilm F9 packer Used for wrapping 24-packs of 410ml and 500ml Only film 35.000h of use Available immediedtly! ...
2015 | 300043538 | SIDEL
More information
Injection molding machine from 250 T up to 500 T . ...
2016 | 300043737 | HUARONG
More information
8 Colours CI Flexo Printing Machines. Mechanical speed up to 350 mt/min Double automatic Unwinder/rewinder max diam 800 mm 8 pneumatic pumps BST camera Web guide before and after the printing unit 8 anilox (1X140V10) (4X160V10) (3X180V9) Sleeves 8 X 660 Available from November 2022...
2004 | 300043767 | OFEM
More information
Injection moulding moulds. -Mould for bowl lid Weight: 88g -Mould for bowl Weight: 181g -Mould for drawer Weight: 43g -Mould for grater Weight: 55g -Mould for cutlery tray Weight: 189g -Mould for dustpan Weight: 66,5g PRICE FOR ALL MOULDS POSSIBILITY TO BE SOLD SEPARATEL...
| 300043860 | HOME MADE
More information
Bottle printing machines. Kase K200 offset printing machine Max radius: 208 mm Min radius: 96 mm Max height: 140 mm Min height 89 mm Supported Volumes: 450 ml cup to 5 Lt Pail UV drying Bucket feeding loading unit...
2006 | 300043934 | KASE
More information
Accumulation Head Extrusion blow moulding machine. Mould platen Max - min opening stroke 1000 - 300 mm Mold thickness (mini - max) 300 - 500 mm Mould dimension 700x700 mm Clamping force 9.4 ton Average consumption 76.8 kW...
2003 | 300044008 | PARKER
More information
Accumulation Head Extrusion blow moulding machine. another 5 similar machine available for sale Mould platen Max - min opening stroke 900- 350 mm Mold thickness (mini - max) 350 - 450 mm Mould dimension 700x800 mm Clamping force 21 ton Average consumption 94,6 kW...
2005 | 300044016 | PARKER
More information
Grinder - Granulator. Heavy-duty granulator Blowing system (power 18,5 kW) Cyclone Spare blades included...
2016 | 300044043 | AVIAN
More information
Rotomoulding mold. -Mold for square recycling container, capacity 3.000 l -Mold for garbage bin, capacity: 1.700 l + flat lid -Mold for square recycling container, capacity 2.500 l -Mold for round recycling container, capacity 3.000 l -Mold for round recycling contain...
2006 | 300044080 | BOCA
More information
PET labelling machine. Used Labeller for pre-cut labels Brand: Krones Production: 15 400 bottle per hour, format 0.5 l. Type of Label: pre-cut Operating hours: 28349 Labels are wraparound. Type of bottle: round Dimension of the label: 231x78 Formats 0,5 and 1,0 Suitable...
2010 | 300044051 | KRONES
More information
Other Dairy Machine Type. Cap feeder Ecke&Sohn for Elopak PS140 UC machine Dismantled and put in box. Manual and back up available...
2019 | 300044342 | ECKEL & SOHN
More information
Chemical filling lines. The complete line for filling all kinds of chemical products from 10 to 250 ml. The line has been used to fill the product for cleaning/parfuming toilets. Consists of: Mewes RF10/250- dosing and filling Mewes RLV 4-D- vibrator for caps that automatic...
2000 | 300044467 | MEWES
More information
Other Dairy Machine Type. Alsafe aspetic Tank Capacity: 11.000 liter (3.000 gallons) Year 2000...
2000 | 300044516 | TETRA PAK
More information
Moulds for Closures. Used cold Half for caps and closures Brand: Husky Weight: 1.75 gr Neck: 30/25 for still water Cavities: 48 cav. number of shots: 239.816 HotRunner not available ...
2016 | 300044651 | HUSKY
More information
Mounter proofer. Mounter proofer for sleeves Shafts width 1100 mm 2 videocameras Shaft diam. 89.243 mm...
2006 | 300044707 | SYSTEC
More information
Thermoformer. Used thermoformer + packaging machine Chain moving with Servo Motor Servo main engine 11 kw ( 31 Nm,3000 rpm ) Servo Plug Assist Motor 7.5 kw ( 25.5 Nm, 3000 rpm ), ( with automatic lubrication) Unwinder (AC) motor 0.75kw ( 89 Nm, 1435 rpm ) Cutting ...
2012 | 300044794 | GÜVEN TEKNIK
More information
Shrink Wrapper for PET bottles. Automatic two-row SMI LSK 42 F packaging machine from 2002 Output of 42 packs per minute The packer has an electrical heating tunnel with automatically controlled air blow and exhaust It has adjustable flaps for precise directing of hot air to the...
2002 | 300044821 | SMI
More information
Thermoformer. Thermoforming machine for egg containers Max sheet width: 880 mm Max tool size: 850x1020 mm Platen clamping force: 35,000 kg Horizontal cutting unit T2 8036/15-15 PTM...
2007 | 300044860 | T2
More information
Glass bottles filler for W&SD. Filler CFT MASTER RS 40/40/10 from 2010 Universal, can fill glass and PET bottles Was filling still and carbonated water Capacity 18000 bph for 0,33 L and 14000 for 0,7 L Available immediately!...
2010 | 300044603 | CFT
More information
Other Dairy Machine Type. Done top cone bottom s/s 1,188 gallon steamed jacketed processor...
| 300044269 |
More information
Hydrostatic pressure tester. Hydrostatic pressure tester BlueLine with 5 independent pressure stations up to 100 bar (extendible) IPT Institut für Prüftechnik NEVER USED LIKE NEW Product Description • Fully-hydraulic system • High water delivery rate for large diameter pipe ...
2012 | 300045051 | IPT
More information
Accumulation Head Extrusion blow moulding machine. Platen size WxH 850x850 Space between platen Min-350 Max-1050 Clamping Force 280kN Die Pin Diameter 60 - 160 Product size 350 x 560...
2007 | 300045070 | KAI MEI
More information
Accumulation Head Extrusion blow moulding machine. Platen size WxH 950X950 Min-Max space between platen 400-1200 Clamping Force kN 430 Die Pin Diameter 70-270 Product size 400X700...
2006 | 300045069 | KAI MEI
More information
Mono extrusion lines. Thickness range:20-150 micron Capacity (Kg/h) 90Kg/h at 50 micron Dosing system - Vacuum pump x1 Rotary die head Die diameter 160mm Gap 1.8 IBC no Double lip short neck ring type Thickness measuring system: No Type of calibration basket - manual Guss...
2006 | 300045075 | LUNG MENG
More information
CNC machining centers. X axis, longitudinal movement 2500 mm, speed 40 m/min Y axis, transverse motion 1500 mm, speed 40 m/min Z axis, vertical motion 800 mm, speed 15 m/min A-axis, rotation around vertical axis 360º, 180º sec B-axis, rotation cutting unit 315º, 180º sec...
1999 | 300045129 | BELOTTI
More information
Moulds. Set of moulds for waterways/gutters for AC...
| 300045155 | LAMP
More information
Label flexo printing machines. Material width: 350mm Max. mechanical speed: 200m/min Materials: - Paper - Light cardboard - Adhesive paper Unwinder with Electronic Web Guide (FIFE) Cold laminating unit sliding on rails Paper tipping unit for backside printing sliding on rails...
2009 | 300045158 | LOMBARDI
More information
EPS Shape Moulding Machines. 7624 hours worked Maximum moulded part size: 2300/1100 mm Maximum moulded part depth: 180 mm Flange - fixed side: 2375 x 1175 mm Flange - movable side: 2375 x 1175 mm Control voltage: 24 V = Energy consumption: ~ 17 kW Operating pressure (pressur...
2007 | 300045154 | ERLENBACH
More information
Cup Fill & Seal machines. Production line for liquid and semi-liquid products with solid particles up to 8x8x8 mm. includes: - 2 tanks with stirrers with a capacity of 5,000 l each - Tubular flow pasteurizer Ruland with a capacity of 2 m3/h Pasteurizer requirements: steam ...
2013 | 300045009 | HUGART
More information
Other Machines. Dewatering plant was bought new for dewater wastewater during paper production process and was never installed due to cleaning process changes Throughput capacity: up to 20 m³/h Max. operation speed: 3500 1/min Inside bowl diameter: 450 mm Bowl wall ...
2020 | 300045263 | HILLER
More information
Thermoformer. Twin-sheet thermoforming machine complete with two automatic loaders Upper and lower oven with halogen lamps 5 fans for cooling ...
2005 | 300045271 | CANNON
More information
Corona treatment. It was installed in an extrusion lamination line Electrode Length: 1.400mm Including ozone switch and fan...
2015 | 300045278 | ME-RO
More information
Cup Form-Fill & Seal machines. Cup form fill and seal machine ARCIL A8-2 FL1027, year 1998 Number of cups per cycle: 18=3x6 Capacity: 28 cycles per minute Cup dimensions: 92 x 70 x 49 Including: Labeling machine Schleuter GU / 4S-M arton box forming machine Tecma Pack Erecting ...
1998 | 300033231 | ARCIL
More information
Complete downstream lines for profiles. PVC roofing/roofing sheet extrusion line WITHOUT EXTRUDER 1. MOLD (LIP) Manufacturer NORWELL Year 2008 weight 713 Kg mold length 53". Minimum lip closure 0,0mm maximum lip opening 2,0 mm total heating zones 7 2. CALANDER Manufacturer: REIFENHA...
2008 | 300045312 | REIFENHAUSER
More information
Cup Fill & Seal machines. Waldner KG 5400 cup fill & seal machine, year 2000 Output: 5400 c/h For round cup with sealed aluminum closure and snap lid Multibox carton packer and Polypack shrink wrapper available upon demand. Already dismantled and available immediately!...
2000 | 300044813 | WALDNER
More information
Chiller. Triple refrigeration circuit...
2008 | 300045476 | EUROCHILLER
More information
Screen changer for extruders. Filter diameter 700 mm Filter laser Micron: from 80 to 300 mesh: from 180 to 50 Punched filter from 400 to 2000 from 40 to 10 Metallic mesh filter from 80 to 2000 from 180 to 10 Filtered materials PP / LDPE /LLDPE / HDPE / PS / EPS / X...
2022 | 300045507 | BREAK MACHINERY
More information
Cup Form-Fill & Seal machines. Water cup form fill and seal machine from PESCO TERMO 10 filling heads. Capacity 10000 units per hour - Hygienic design - PLC system - Fotocell system - Cylindrical water filling tank Working hours around 800 hours. ...
2016 | 300045540 | PESCO TERMO
More information
Mono extrusion lines. Screw L/D 30 Rotating die 400 mm with IBC Dual lip air ring Thickness 20-150 my Gravimetric dosing unit 6 components Motorized calibrations basket Automatic thickness control system K-design Fixed haul off Double side corona treatment AFS Tower not i...
1998 | 300045594 | REIFENHAUSER
More information
Twin-screw extruder for PE/PP compounds. 1xTwin screw extruder APV 50-30D (Baker Perkins): Processed materials: PE/PP/PA/PC/ABS/PS Output capacity: 70-150 kg/h Number of hoppers: 1 EXTRUDER: APV 5 Manufacturer: APV Baker Perkins Model: MP Twinscrew extruder output capacity: 20-200 kg/h scr...
2000 | 300045596 | BAKER PERKINS
More information
Complete PET filling line for sparkling water. Products: mineral water and carbonated drinks Bottle type (basic): from 0.5 l to 2.5 l volume PET closing type: PP screw-cap format 29/25 short + 29/25 Sport Labels: paper (not from roll) Package format: 3x2, wrapped in heat shrink film Tray: E...
2010 | 300045591 | KOSME
More information
Other Machines for Drinks. Oil-fired boiler plant The offer includes: - CERTUSS steam generator type Universal 700 TC with oil burner, including ancillary equipment (hot water filter, pre-pump, steam drier) with a capacity of 700 litres of steam/hour with a reduction stat...
2023 | 300045637 | CERTUSS
More information
Cheese equipment. Vertical Bag filling machine for Mozzarella Brand: Comiz Model: C 450 Year 2005 Formats: 125/250gr Production: 48 ppm standard 15ppm ribbon pack The machine is stopped but will be maintained and put in dry cycle....
2005 | 300045747 | COMIZ
More information
Other Machines. Automatic packaging GPI Line that automates all processes after the finished packaged product, i.e., preparation of the cartons, stuffing the product into cartons, marking the cartons, palletizing, counting. The line is suitable to be installed t...
2016 | 300045768 | GPI
More information
Robot. Robot Star T 600 III Stroke 800mm...
2007 | 300045790 | STAR AUTOMATION
More information
Other processing machines. Heat radiation roasting tunnel from BIGTEM MAKINE A.S. Turkey, From 2015 Used for skin roasting of peppers, aubergines, etc.and onions for flame peeling Machine includes: - 6 top and 6 bottom burners providing max all round roasting - high capaci...
2015 | 300045824 | BIGTEM MAKINE
More information
Other Machines for Drinks. Cylinder conic tank Apparatebau Nordhausen Manufacturing year: 1998/2000 Tank type: Vertical CCT, outside type Tank volume: 1 000 HL Number of cooling zones: 3 zones...
2000 | 300045831 | APPARATEBAU NORDHAUSEN
More information
Other Machines for Drinks. Scaligera Ulisse 4000 sleever for cans, year 2016 Output: 4000 cans/hour Sleeves for Sleek and Standard cans Machine orientation: left to right Includes Scaligera TVP2SE steam oven, year 2016 Machine in production until beginning September 2023. ...
2016 | 300045825 | SCALIGERA
More information
Injection moulding moulds. Shopping Basket, composed by 5 moulds. 1) Bottom Plate (380ton, PP) 2) Front Plate (380ton PP) 3) Lateral Plate (380ton PP) 4) Rear Plate (380ton PP) 5) Lockings (110ton PP) ...
2013 | 300045841 | HOME MADE
More information
Sheet coextrusion lines. Output Kg/h: 250 - 350 depending on material, thickness, etc.. Two single screw extruders of Ø 120mm and Ø 75mm Volumetric dosing unit on main extruder Horizontal hydraulic screen changer with double cavity 16 mm diameter Flat die head max. width ...
2008 | 300041426 | SIEPLA
More information
Filler for pouches. Ropak Express pack- 2001 4 lane VFFS Can fill from 5 grams to 7 liters It was filling a hot fill 5 FLOZ BBQ sauce It was running 4 lanes at 15 to 20 cycles per minute that comes to between 60 and 80 PPM. Excellent condition. ...
2001 | 300045935 | ROPAK
More information
Thermoformer. Heating system Ceramic Heaters Manual Sheet loader Vacuum pump 2,2 kw...
2001 | 300045972 | VILLA
More information
Winder for flexibles tubes and profiles. Double winder LUNARDON 5-2700 for PE pipes in the range of Ø 63 - 125 mm...
2000 | 300045988 | LUNARDON
More information
Washing machine for glass bottles. Bottle rinser GRONEMEYER from 2012 Glass bottles. Capacity: 20.000 b/h Idle since 2019 Dismantled and stored and available immediately! ...
2012 | 300046006 | GRONEMEYER
More information
Bottle inspector. Empty Bottle Inspector HEUFT from 2007 Capacity: 40.000 bph Idle since: 2020 Dismantled and stored ...
2007 | 300046021 | HEUFT
More information
Other carton filling machine. Carton filling machine Elopak PS30 Product: liquid yoghurt with shelf life 18 days Volume: 1000 ml, but can work also with 500ml and 250ml Cross section: 70x70 mm Package style - A Screw Cap on the package The machine is still in production ...
1993 | 300046035 | ELOPAK
More information
Stretch film extrusion line. 3 layers stretch extrusion line Extruders 1x 160 mm LD 32, AC motor 315 kw, dosing unit Doteco 1 component 2x 90 mm LD 30 AC motor 110 kw, each one dosing unit Doteco 1 component Trim recycling extruder 105 mm LD 6, AC motor 55 kw Die head...
2002 | 300046056 | PRIMPLAST
More information
Other processing machines. Biscuit line Flamma / Haas hacrona from 1980 modernizted in 2015 Includes: - dough forming (rotational + extrusion) - oven - cooling zone Extrusion aprox. 320 kg/h Rotary moulding 500-600 kg/h Line length : approx 70m Width of the baking belt : ...
1980 | 300046037 | FIAMMA
More information
Fruits processing line. Machines for grinding and pressing fruit and vegetables MEGA + FLOTTWEG from 2008-2018 Capacity aprox. 2 T per hour Includes: 1. Backfill bunkier - Mega 2012 2. Rotary sieve with external influx dia. drum 355mm length. drum 1600 mm - Mega (Flott...
2014 | 300046092 | FLOTTWEG
More information
Other Machines for Drinks. Reda RE70V centrifuge for wine, year 2002 Capacity: 25 000 L/H Maximum bowl speed : 7000 rpm Self-cleaning Includes: - wine tank at the end of fermentation - feed pump - clarifier - centrifuge (disk centrifuge for liquid/solids separation) - cla...
2002 | 300046100 | REDA
More information
Cup Fill & Seal machines. Machine FDPM from 2016 for labeling and filling dry fractions into a cup. Material: PP+PAP Decoration: printed segment Method of production: Thermoforming + wrapping Capacity up to 3000 u/h Closing the cup with a film and lid. In addition it has th...
2016 | 300046209 | FDPM
More information
Air Compressors (Low Pressure). ...
2013 | 300046222 | ATLAS COPCO
More information
Other Machines. Powder system Nordson CMC Maximum powder output: 42 kg/h Total openings area: 6,55 m2 Supply air pressure: 7 bar (max)....
2016 | 300046236 | NORDSON
More information
Thermoformer. Vacuum thermoforming machine from EPP reels. Everything goes in line, fully automatic and all auxiliary equipment is included: vacuum, cooling, mold change trolleys, etc. Forming area: 760x2250 mm max. Part height: 220 mm pos. max, 30 mm neg. max. U...
2000 | 300046271 | KIEFEL
More information
Injection moulding moulds. Mould for bucket 4.8lt+ lid. Bucket-lid cavities: 1; 1 Article weight: 162.5gr; 52gr Mould dimensions: Ø490xH555; Ø445xH275 Article dimensions: Ø200xH205 Machine: 300ton; 100ton Cycle time: 9sec; 8sec...
| 300046294 | HOME MADE
More information
Coextrusion lines. Materials: LDPE, LLDPE, HDPE, EVA, PA Thickness: 20-200 my 2x90mm Brampton extruder with Manual Screen Changer, 93kW AC Drive 1x90mm Brampton extruder with Manual Screen Changer, 112kW AC Drive ITALYCS ®IV PLC based Control Cabinet with Host PC , S...
2004 | 300046284 | BRAMPTON
More information
Dehumidifier. Centrifugal decanter CBB Application : dewatering of sludge in the sewage treatment plant. The CENTRIFUGES CBB DECANTER are horizontal separators designed for the separation of two or three phases contained in a product of civil and/or industrial and...
2013 | 300046333 | CBB DECANTER
More information
Silos. Drive system : Electric Electric motor : 0.55 kW Max discharge flow rate : 125 m3/h Filtering surface : 10m2 Never used Only 1 silo with the structure for one of them is for sale....
2019 | 300046335 | EL FERRIOL
More information
Shrink Wrapper for PET bottles. Kosme Vialiner 1B bottle or pack divider, year 2015 It feeds the infeed lines of a packaging machine 1 to 3 lanes for 100cl bottles (up to 110mm diameter) 1 to 4 lanes for 75cl bottles (up to 90mm diameter) 1 to 5 lanes for 33cl bottles (up to 70m...
2015 | 300046360 | KOSME
More information
Air Compressors (High Pressure). AF CE46B - High Pressure Air compressor 3 stages piston compresor Dismantled and available immediately! ...
2003 | 300046446 | ATELIER FRANÇOIS
More information
Beer processing. Clarifier Alfa Laval Brew 701 for beer. Year 2016 Has not been used (0 working hours) Including pump Output: 100.000 L/H Low energy and water consumption. High clarification efficiency (99.9%). Low maintenance. Small size. Low noise level. Low temp...
2016 | 300046376 | ALFA LAVAL
More information
Extrusion Blow Moulding machines up to 2 L . Machine components: Mitsubishi control RKC temperature controls Allen Bradley relays and contactors GE FUJI Inverters Vickers pumps and valves FESTO Pneumatic Controls SMC Pneumatic Cylinders Hot cutting blade exit conveyors flashes conveyor Externa...
2007 | 300042671 | AKEI
More information
Extrusion Blow Moulding machines up to 2 L . Machine components: Mitsubishi control RKC temperature controls Allen Bradley relays and contactors GE FUJI Inverters Vickers pumps and valves FESTO Pneumatic Controls SMC Pneumatic Cylinders Hot cutting blade exit conveyors flashes conveyor Externa...
2009 | 300042674 | AKEI
More information
Other Dairy Machine Type. Good Nature hydraulic juice press and grinder Model: EG-260, PX4. Vertical layer design allows for even pressure on fruit and vegetables. Output: 45-80 l/h, max: 150 l/h. ...
2014 | 300046522 | GOODNATURE PRODUCTS
More information
Wines and spirits filling lines. Gravity filler for non carbonated wines Production: 7000 bph Can fill only still wines The machine had been well maintained during all the years in operation and is currently in working condition ...
2001 | 300046518 | MBF
More information
Other machines for filling and packing. Cablevey Feeding Conveyor System For dried fruit Seller transported dried fruit: hazelnuts, almonds Material moisture content (%) 15 Material size - 4000 series 0.75 x0.75 x 0.75 in 1.9 x 1.9 x 1.9 cm Material size - 6000 series 1.50 x 1.50 x 1.5...
2013 | 300046520 | CABLEVEY
More information
Mounter proofer. Min-max repeat : 350-1200mm. Currently there is a shaft for a sleeve of 1240mm diam 105.158. There are 2 cameras for microdot mounting, for example. There's also a linear guide with digital display for multi-track plate mounting....
2005 | 300046559 | D.UNIFLEXO
More information
Mixer for solventless. 2 Unused solvent base mixers 90 Ltr Capacity Self standing Control Panel Viscosity-meter 3-Components Rack made by machine owner - part of the deal...
2022 | 300046578 | NORDMECCANICA
More information
6 Colours CI Flexo Printing Machines. Mechanical speed: 300 m/min Plate-Thickness, Sticky Back: 1,14; 2,54; 2,84 mm Rewinder & Unwinder type: double Web guide: yes Corona Doctor blade: 6 pcs BST video control Anilox 80/15 x 1 110/14 x 1 160/9 x 1 160/10 x 1 200/5.5 x 1 240/7.1 x 1 260/...
1994 | 300046583 | CARINT
More information
Other Machines. ...
2008 | 300046731 | KBH
More information
Aseptic systems. UHT pasteurization line GEA TDS, year 2008 Capacity: 6.000-12.000, frequency controlled Milk max. 4% fat Fuit juice max viscosity 10cp /10 gr. C. No fibers Including: 1. UHT H/M 200 GEA TDS. Complete with tube& shell heat exchanger, stainless fee...
2008 | 300046735 | GEA
More information
Cup Fill & Seal machines. Cup fill and seal machine Nova/Mecatherm for pudding in aluminium cups 4 x 100 g pack Vaccum cleaning system for aluminium cups Pudding dosing unit Caramel dosing unit Oven Mecatherm UN FOUR DOUBLE ACTION Type FDA Oven with 4 burners Oven with robo...
2014 | 300046716 | NOVA
More information
Combination mixers. ...
2000 | 300046760 | VALTORTA
More information
Dehumidifier. Dehumidifier Moretto D205 + hopper loader Moretto C10 F40 Year: 2003...
2003 | 300046764 | MORETTO
More information
Saw for profiles. ...
2010 | 300046775 | BASTON
More information
Other Machines for Drinks. Carton sealer Youngsunpack from 2020 Model: MH-FJ-3A Work height: 500-710 mm Capacity: 12-15 cartons/min Box length: 150-600 mm Box width: 115-490 mm Box height: 110-490 mm Tape: PVX or PP; width: max 50 mm; core: 76 mm. It folds and closes the t...
2020 | 300046634 | YOUNGSUNPACK
More information
Bottle inspector. HEUFT Bottle Glass inspector InLine Reflexx Construction year 2014 Used for 1 L white glass milk bottles Suitable for 87 mm diameter bottles Height 259 mm Height of the cylindrical body area min. 20 mm / max. 175 mm Mouth diameter 38 mm 38 mm - ...
2014 | 300046770 | HEUFT
More information
Sleever for PET bottles. Clever sleever for PET bottles Type: rotatory Output: up to 36.000 bph 3 application heads Type of sleeve: Total / partial top and bottom / tamper evident seal Available immediately! ...
2012 | 300045240 | CLEVER MACHINES
More information
Sheet monoextrusion lines. Rigid PVC Sheet line 80/156 mm x 1815 mm eff. Length Conical Twin Screw Extruder, 55 kW AC motor. Melt Pressure Transducer. 4 kW Vacuum Pump. 915 mm T-die, 1 ~ 3 mm opening. 1200 mm 3-roll Calendar, 3 kW x 3 nos. motors, 18 kW x 3 nos. Roller te...
2018 | 300046810 | GWELL
More information
Shrink Wrapper for PET bottles. Automatic Packer and Shrinkwrapper BBM Мodel: model LSK30/F YEAR: 2019 (renovated) Description: N. 1 Infeed conveyor N. 1 Automatic shrink wrapper N. 1 Shrinking tunnel Renovated equipment - Automatic overlap shrink wrapper with inline inf...
2019 | 300046815 | BBM
More information
Other machines for filling and packing. EFAMAN thermosealing line for controlled atmosphere packaging in preformed trays with Skin system This guarantees the preservation of the products Suitable for meat, fish, vegetables, dairy products, pre-cooked products ........ 5 sealing formats ...
2017 | 300046799 | EFABIND
More information
Bottom weld bags on the roll. Automatic high speed welding machine for the production of shopping bags with handle (shopping bag type) and bottom or round bottom seal (star seal bottom bag type) on paper cores Master reel width 600-1300 mm Material thickness 2x8 mm to 440 my Car...
2017 | 300046882 | AMUTEC
More information
Screen changer for extruders. Oleodynamic Screen Changer GMO 160/300 Two Sliding plates screen-changer Automatic change during production Heating by means of electric heaters Pressure gauge with a 0-700 bar scale with warning light and automatic stop of the extruder if the pressu...
2019 | 300046885 | BD PLAST
More information
6 Colours CI Flexo Printing Machines. Mechanical speed:150 mt/min Unwind/Rewind max diameter 700 mm Web guide before and after the printing unit 6 pneumatic pumps Aniloxes x 6 Airshafts x 4 Blade chambers x 7 Air Mandrels x 8 Cylinders included 320mm x 6 340mm x 6 360mm x 6 380mm x 6...
1998 | 300046887 | OFEM
More information
Filler for pouches. Filling machine for sticks INEVER from 2014 Model: PH8 - 8 lanes, vertical stick pouch packaging machine Capacidad: 1.000 kg/h, up to 384 sticks per minute Temperature/pressure sealing Sterile air supply (equivalent to nitrogen) Touch screen displ...
2014 | 300046898 | INEVER
More information
Other Dairy Machine Type. Yoghurt process tank Kolding (Denmark), year 2000 With a snake and ram mixer and tubular cooler used for yogurt production. Has a conic bottom. Capacity: 8000 l/h Sill installed in the production hall but out of use since end of 2017. ...
2000 | 300046911 | KOLDING
More information
Air Compressors (Low Pressure). Power: 30 kW Free air delivery l/s : 70;3 Rotational shaft speed : 3000 rpm...
2001 | 300046941 | ATLAS COPCO
More information
Die head for Blow Extrusion. Available for sale (price per die head) - die head 1 x Ø 60 x 1 lt PREVEN - die head 1 x Ø 80 x 2 lt PREVEN...
| 300046953 | PREVEN
More information
Other processing machines. Linear multi-head scale from 2017 Weighing machine for weighing irregular products with springy structure: tripe, meat trimmings, poultry offal Brand: Elektron Model: LWW-8 Number of weighing chambers: 8 Operating temperature range: 0-40º C Weighti...
2017 | 300046958 | ELEKTRON
More information
Laminators. Coated materials BOPP 15－80 my PETP 12－40 my LDPE,LLDPE 40－200 my OPA 12－25my NYLON CAST 20－80 my ALU 7－40 my PP CAST 30－150 my CALENDERED PAPER 35－300g/m2 Laminated materials BOPP 12-80 my PP CAST 20－150 my ALU 7－40 my LDPE,LLDPE 20－200 my DIFF...
2006 | 300046968 | NORDMECCANICA
More information
Aseptic systems. UHT system GEA Finnah type: 6500/080, year 1991 (completely refurbished in 2002) Indirect tube-in-tube process Output increased from 6,500 to 10,400 l/h Including: - Homogenizer APV Gaulin 90-3,6P, 2-stages (pressure via potentiometer for adjus...
1991 | 300046984 | GEA
More information
Other Dairy Machine Type. Isolated tanks (2 pieces) Original year of construction: not known. Estimated from the 90's - Capacity 14,000 litres (each) visible via pointer display - Agitator with propeller - Spray bale for CIP installed - Mixing line for ingredients and cir...
| 300046983 |
More information
Other Machines. startech cn v is the new universal drilling and cutting machine with integrated NC cutter with fixed door worktable and movable part, designed for: vertical drilling on the panel surface horizontal drilling on all four sides cutting with integrated...
2019 | 300046993 | SCM WOOD
More information
Sealing machine. Used thermosealing machine Sealpac A8 from 2012 Up to 140 trays per minute Capacity: up to 14 cycles per minute Suitable for all standard applications for industrial food production. Weight of the machine: 3.000 kg Air pressure: 6 bars There is...
2012 | 300047008 | SEALPAC
More information
Stretch blow moulding machines. ADS G 61 blow molding machine for 5-liter bottles Output: 800 bt/h Includes : - preform feeder - unscrambler. - new API and new temp regulators - manuals They're changing the machine because they'd like a new bottle neck. Periodically maintaine...
1998 | 300046959 | ADS
More information
Thermoformer. Thermoforming machine Material width 686-1092 mm Max. forming pressure 76tons Die cutting press Closing force 27tons Max. material length 1346 mm...
1998 | 300047064 | BROWN
More information
Injection stretch blow moulding machines for PET bottles. Used injection stretch blow molding machine Nissei ASB PF 3-1BH Version 2 it produce bottles of 5 liters weight of the preforms 135 gr machine connected to the electricity the machine includes the follow auxiliaries: - Dryer Plastic Systems DR ...
2001 | 300047014 | NISSEI ASB
More information
SIG Combibloc line. Aseptic milk filling line SIG Combibloc CFA 507-21, year 1995 Package volumes: 0,5 l, 1l and 1,1l Including: - Filler Combibloc CFA507-21 - Cap applicator for recap, not installed on the line - Tray packer A+F, not installed on the line - Shrink ...
1995 | 300047122 | SIG COMBIBLOC
More information
Accumulation Head Extrusion blow moulding machine. ...
2001 | 300047167 | ST
More information
Labelling machine for glass bottles. Labeler for glass bottles GERNEP Labetta 4/3/10 640 2A Capacity from 2.000 to 15.000 bph Min label length 25mm Max label length 140mm Maximum label height 150mm Minimum height from bottle bottom 15mm Maximum height from bottle bottom 320mm Dismant...
2013 | 300047191 | GERNEP
More information
Packing machine for glass bottles. Packaging machine Baumer from 2013 Model Line Flex 337 Possible configurations: - for bottles 0,5L (diameter 68mm and height 235mm) - 4x5 with tray and foil - for bottles 0,5L (diameter 68mm and height 240mm) - 4x5 with tray and foil - for bottles ...
2013 | 300047189 | BAUMER
More information
Labeller. Labeller for egg packages KERT from 2012 Dimensions: 2000x800x1600 Weight: 300 kg Power supply: 400V/5-60 Hz Power consumption: 1 kW Compressed air: 6 bar Ambient temperature: 20-24 C Air humidity: up to 80% Label parameters: Label roll width: 8-150...
2013 | 300047155 | KERT
More information
